CM1408-04DE [ONSEMI]
4-Channel LCD and Camera EMI Filter Array with ESD Protection; 4通道LCD和相机EMI滤波器与ESD保护阵列型号: | CM1408-04DE |
厂家: | ONSEMI |
描述: | 4-Channel LCD and Camera EMI Filter Array with ESD Protection |
文件: | 总9页 (文件大小:454K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
4-Channel LCD and Camera EMI Filter
Array with ESD Protection
CM1408-04DE
Features
Applications
•
•
•
channels of EMI filtering with integrated ESD
protection
Pi-style EMI filters in a capacitor-resistor-
capacitor (C-R-C) network
15kV ESD protection on each channel
(IEC 61000-4-2 Level 4, contact discharge)
30kV ESD protection on each channel (HBM)
Greater than -35dB attenuation (typical) at 1GHz
TDFN packaging with 0.5mm lead pitch:
Increased robustness against vertical impacts
during manufacturing process
•
•
LCD and Camera data lines in mobile handsets
I/O port protection for mobile handsets, notebook
computers, PDAs etc.
EMI filtering for data ports in cell phones, PDAs
or notebook computers.
Wireless handsets
Handheld PCs/PDAs
LCD and camera modules
•
•
•
•
•
•
•
•
•
Lead-free finishing
Block Diagram
©2010 SCILLC. All rights reserved.
April 2010 Rev.2
Publication Order Number:
CM1408-04DE/D
CM1408-04DE
PIN DESCRIPTIONS
DEVICE PIN(s)
NAME
FILTER1
FILTER2
FILTER3
FILTER4
GND
DESCRIPTION
DEVICE PIN(s)
NAME
FILTER1
FILTER2
FILTER3
FILTER4
-
DESCRIPTION
1
Filter + ESD Channel 1
Filter + ESD Channel 2
Filter + ESD Channel 3
Filter + ESD Channel 4
Device Ground
8
7
6
5
-
Filter + ESD Channel 1
Filter + ESD Channel 2
Filter + ESD Channel 3
Filter + ESD Channel 4
2
3
4
GND PAD
---
Rev. 2 | Page 2 of 9 | www.onsemi.com
CM1408-04DE
Ordering Information
PART NUMBERING INFORMATION
Lead-free Finish
Ordering Part Number1
Part Marking
Pins
Package
TDFN-8
8
CM1408-04DE
N08 4E
Note 1: Parts are shipped in Tape and Reel form.
Specifications
ABSOLUTE MAXIMUM RATINGS
PARAMETER
RATING
UNITS
Storage Temperature Range
-65 to +150
100
°C
DC Power per Resistor
mW
mW
DC Package Power Rating
500
STANDARD OPERATING CONDITIONS
PARAMETER
RATING
UNITS
Operating Temperature Range
-40 to +85
°C
Rev. 2 | Page 3 of 9 | www.onsemi.com
CM1408-04DE
ELECTRICAL OPERATING CHARACTERISTICS(SEE NOTE1)
SYMBOL PARAMETER
CONDITIONS
MIN
TYP
MAX
UNITS
R
Resistance
80
100
120
Ω
CTOTAL
Total Channel Capacitance
At 2.5VDC Reverse Bias, 1MHz,
30mVAC
14
17
22
pF
C
Capacitance C
At 2.5VDC Reverse Bias, 1MHz,
30mVAC
8.5
pF
VDIODE
ILEAK
Standoff Voltage
IDIODE=10μA
6.0
0.1
V
Diode Leakage Current (reverse bias)
1.0
μA
VDIODE= 3.3V
VSIG
Signal Clamp Voltage
Positive Clamp
ILOAD = 10mA
ILOAD = -10mA
5.6
-1.5
6.8
-0.8
9.0
-0.4
V
V
Negative Clamp
VESD
In-system ESD Withstand Voltage
a) Human Body Model, MIL-STD-883,
Method 3015
Notes 2 and 3
30
15
kV
kV
b) Contact Discharge per IEC 61000-4-
2 Level 4
RDYN
Dynamic Resistance
Positive
2.3
0.9
Ω
Ω
Negative
Cut-off Frequency
Channel R = 100Ω,
Channel CSINGLE = 8.5pF
f
C
Z
SOURCE=50Ω, ZLOAD=50Ω
200
MHz
Note 1: TA=25°C unless otherwise specified.
Note 2: ESD applied to input and output pins with respect to GND, one at a time.
Note 3: These parameters are guaranteed by design and characterization.
Rev. 2 | Page 4 of 9 | www.onsemi.com
CM1408-04DE
Performance Information
Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment)
Figure 1. Insertion Loss vs. Frequency (FILTER1 Input to GND)
Figure 2. Insertion Loss vs. Frequency (FILTER2 Input to GND)
Rev. 2 | Page 5 of 9 | www.onsemi.com
CM1408-04DE
Performance Information (cont’d)
Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment)
Figure 3. Insertion Loss vs. Frequency (FILTER3 Input to GND)
Figure 4. Insertion Loss vs. Frequency (FILTER4 Input to GND)
Rev. 2 | Page 6 of 9 | www.onsemi.com
CM1408-04DE
Performance Information (cont’d)
Typical Diode Capacitance vs. Input Voltage
Figure 5. Filter Capacitance vs. Input Voltage
(normalized to capacitance at 2.5VDC and 25°C)
Rev. 2 | Page 7 of 9 | www.onsemi.com
CM1408-04DE
Mechanical Details
TDFN-08 Mechanical Specifications
Dimensions for CM1408-04DE device packaged in an 8-lead TDFN package are presented below.
PACKAGE DIMENSIONS
D
8
7
6
5
TDFN
Package
MO-229 (Var. VCCD-3)✝
JEDEC
No.
8
Leads
Dim.
Pin 1
Marking
Millimeters
Nom Max
Inches
Nom Max
Min
Min
1
2 3 4
0.70
0.75
0.20 REF
0.25
0.80 0.028 0.030 0.032
0.008 REF
A
A3
b
TOP VIEW
0.10
C
0.20
1.95
1.55
1.95
0.85
0.30 0.008 0.010 0.012
2.05 0.077 0.079 0.081
1.65 0.061 0.063 0.065
2.05 0.077 0.079 0.081
0.95 0.033 0.035 0.037
0.020 BSC
2.00
D
A
A3
SIDE VIEW
1.60
D2
E
2.00
0.90
E2
e
1
8
2 3 4
0.50 BSC
D2
0.20
0.25
0.008
K
C0.25
GND PAD
0.30
0.35 0.010 0.012 0.014
3000 pieces
L
L
# per
tape and
reel
7
6 5
K
b
8X
e
M
0.10
C A B
Controlling dimension: millimeters
BOTTOM VIEW
✝This package is compliant with JEDEC standard MO-229,
variation VCCD-3 with exception of the "D2" and "E2"
dimensions as called out in the table above.
Dimensions for 8-Lead, 0.5mm pitch
TDFN package
Rev. 2 | Page 8 of 9 | www.onsemi.com
CM1408-04DE
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any
products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising
out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical”
parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating
parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the
rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to
support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or
use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such
unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action
Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800-282-9855
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada
Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
Toll Free USA/Canada
Europe, Middle East and Africa Technical
Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81-3-5773-3850
For additional information, please contact your local
Sales Representative
Rev. 2 | Page 9 of 9 | www.onsemi.com
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明