CM1241-04D4 [ONSEMI]
4-Channel Low Capacitance Dual-Voltage ESD Protection Array; 4通道低电容双电压ESD保护阵列型号: | CM1241-04D4 |
厂家: | ONSEMI |
描述: | 4-Channel Low Capacitance Dual-Voltage ESD Protection Array |
文件: | 总12页 (文件大小:390K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
4-Channel Low Capacitance Dual-Voltage
ESD Protection Array
CM1241
•
•
Low channel input capacitance
Minimal capacitance change with temperature
and voltage
Features
•
•
•
3 channels of low voltage ESD protection
•
•
•
High voltage zener diode protects supply rail
No need for external bypass capacitors
Each I/O pin can withstand over 1000 ESD
strikes*
1 channel of high voltage ESD protection
Provides ESD protection to IEC61000-4-2 Level
4:
8kV contact discharge (Pins 1-3)
15kV contact discharge (Pin 4)
•
RoHS compliant, lead-free finish
Block Diagram
VP (Internal)
VCC
Pin 4
O
O
Pin 1
Pin 2
CH1
O
CH2 O
Pin 3
CH3
O
Pins 6 - 8
Pin 5
GND
VN
©2010 SCILLC. All rights reserved.
April 2010 – Rev. 3
Publication Order Number:
CM1241/D
CM1241
Typical Application
*Standard test condition is IEC61000-4-2 level 4 test circuit with each pin subjected to 8kV contact discharge for 1000 pulses. Discharges are timed at 1 second intervals and all 1000 strikes are completed in one continuous
test run. The part is then subjected to standard production test to verify that all of the tested parameters are within spec after the 1000 strikes.
Package / Pinout Diagrams
Rev. 3 | Page 2 of 14 | www.onsemi.com
CM1241
Pin Descriptions
4-CHANNEL, 8-LEAD, TDFN-8 PACKAGE
Pin
Name
Type
Description
1
CH1
CH2
CH3
VCC
I/0
LV Low-capacitance ESD Channel
LV Low-capacitance ESD Channel
LV Low-capacitance ESD Channel
HV ESD Channel
2
3
I/0
I/0
4
HV VDD
5
GND
VN
Ground
6
Negative Voltage Supply Rail
Negative Voltage Supply Rail
Negative Voltage Supply Rail
Die Attach Pad (Ground)
7
VN
8
VN
DAP
GND
Ordering Information
PART NUMBERING INFORMATION
Lead-free Finish
Ordering Part Number1
CM1241-04D4
Part Marking
# of Channels
Leads
Package
4
8
TDFN-8, 0.4mm
AW1
Note 1: Parts are shipped in Tape and Reel form unless otherwise specified.
Rev. 3 | Page 3 of 14 | www.onsemi.com
CM1241
Specifications
ABSOLUTE MAXIMUM RATINGS
PARAMETER
RATING
UNITS
DC Voltage on Low-voltage Pins
6.0
V
DC Voltage on High-voltage Pins (VCC pin)
Operating Temperature Range
Storage Temperature Range
14.5
V
–40 to +85
–65 to +150
°C
°C
STANDARD OPERATING CONDITIONS
PARAMETER
RATING
–40 to +85
UNITS
Operating Temperature Range
°C
Rev. 3 | Page 4 of 14 | www.onsemi.com
CM1241
ELECTRICAL OPERATING CHARACTERISTICS (SEE NOTE 1)
SYMBOL PARAMETER
CONDITIONS
MIN
TYP
MAX UNITS
VF
LV Diode Reverse Voltage
(Positive Voltage)
IF = 10mA; TA= 25°C
6.8
8.2
9.2
V
LV Diode Forward Voltage
(Negative Voltage)
IF = 10mA; TA= 25°C
–1.05
–0.9
–0.6
100
V
ILEAK
LV Channel Leakage Current
(Pins 1 and 2)
TA= -30°C to 65°C; VIN= 3.3V,
VN=0V
nA
LV Channel Leakage Current
(Pin 3 only)
TA= -30°C to 65°C; VIN=3.3V,
VN=0V
100
1.5
nA
CIN
LV Channel Input Capacitance
At 1 MHz, VN=0V, VIN=1.65V
At 1 MHz, VN=0V, VIN=1.65V
1.2
pF
pF
LV Channel Input Capacitance
Matching
0.02
∆CIN
ILEAK_HV
CIN_HV
HV Channel Leakage Current
HV Channel Input Capacitance
TA=25°C; VCC=11V, VN=0V
At 1 MHz, VN=0V, VIN=2.5V
0.1
53
1.0
µA
pF
VF_HV
HV Diode Breakdown Voltage
Positive Voltage
IF = 10mA; TA=25°C
14.6
17.7
V
VESD
ESD Protection
Peak Discharge Voltage at any
channel input, in system
Contact discharge per
IEC 61000-4-2 standard
TA=25°C
8 (Pin 1-3)
15 (Pin 4)
kV
kV
VCL
LV Channel Clamp Voltage (Pin 1-3) TA=25°C, IPP = 1A,
Positive Transients
Negative Transients
+9.64
–1.75
V
V
tP = 8/20µS
RDYN
Dynamic Resistance
IPP = 1A, tP = 8/20
µS
LV Channel Positive Transients
LV Channel Negative Transients
HV Channel Positive Transients
HV Channel Negative Transients
0.72
0.59
1.20
0.36
Ω
Ω
Ω
Ω
Any I/O pin to Ground
Note 1: All parameters specified at TA = –40°C to +85°C unless otherwise noted.
Rev. 3 | Page 5 of 14 | www.onsemi.com
CM1241
Performance Information
Input channel capacitance performance curves for low voltage pins
Rev. 3 | Page 6 of 14 | www.onsemi.com
CM1241
Performance Information (cont’d)
Typical filter performance for low voltage pins
Nominal conditions unless specified; otherwise, 50 ohm environment.
Figure 1. Channel 1 Vs. All GND Pins (0V DC Bias)
Figure 2. Channel 2 Vs. All GND Pins (0V DC Bias)
Rev. 3 | Page 7 of 14 | www.onsemi.com
CM1241
Performance Information (cont’d)
Typical filter performance for low voltage pins
Nominal conditions unless specified; otherwise, 50 ohm environment.
Figure 3. Channel 3 Vs. All GND Pins (0V DC Bias)
Rev. 3 | Page 8 of 14 | www.onsemi.com
CM1241
Mechanical Details
TDFN-08 Mechanical Specifications, 0.4mm
Dimensions for the CM1241 supplied in a 8-lead, 0.4mm pitch TDFN package are presented below.
PACKAGE DIMENSIONS
TDFN
Package
MO-229C*
JEDEC
No.
8
Leads
Dim.
Millimeters
Inches
Min
Nom Max
Min
Nom Max
0.70
0.75
0.02
0.80 0.028 0.030 0.031
0.05 0.000 0.001 0.002
0.008 REF
A
A1
A3
b
0.00
0.200 REF
0.20
0.15
1.60
1.10
1.25
0.30
0.25 0.006 0.008 0.010
1.80 0.063 0.067 0.071
1.30 0.043 0.047 0.051
1.45 0.049 0.053 0.057
0.50 0.012 0.016 0.020
0.016 BSC
1.70
D
1.20
D2
E
1.35
0.40
E2
e
0.40 BSC
0.22 REF
0.25
0.009 REF
K
0.15
0.35 0.006 0.010 0.014
3000 pieces
L
# per
tape and
reel
Dimensions for 8-Lead, 0.4mm Pitch TDFN
Package
Controlling dimension: millimeters
*
This package is compliant with JEDEC standard MO-229C with
the exception of the D, D2, E, E2, K and L dimensions as called
out in the table above.
Rev. 3 | Page 9 of 14 | www.onsemi.com
CM1241
Tape and Reel Specifications
PACKAGE SIZE
(mm)
POCKET SIZE (mm) TAPE WIDTH
W
REEL
DIAMETER
QTY PER
REEL
PART NUMBER
B0 X A0 X K0
P0
P1
CM1241
1.70 X 1.35 X 0.75
2.00 X 1.65 X 1.05
8mm
178mm (7")
3000
4mm 4mm
Rev. 3 | Page 10 of 14 | www.onsemi.com
CM1241
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any
products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out
of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters
which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including
“Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC
products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for
any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any
such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs,
damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all appli-
cable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800-282-9855
Toll Free USA/Canada
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada
Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81-3-5773-3850
For additional information, please contact your local
Sales Representative
Rev. 3 | Page 11 of 14 | www.onsemi.com
CM1241
Rev. 3 | Page 12 of 14 | www.onsemi.com
相关型号:
CM1248-04QF
Trans Voltage Suppressor Diode, 6.1V V(RWM), Unidirectional, 4 Element, Silicon, LEAD FREE, MO-229C, DFN-6
CALMIRCO
CM1248-04QG
Trans Voltage Suppressor Diode, 6.1V V(RWM), Unidirectional, 4 Element, Silicon, LEAD FREE, MO-229C, DFN-6
CALMIRCO
CM1248-04S9
Trans Voltage Suppressor Diode, Unidirectional, 4 Element, Silicon, SOT-953, 5 PIN
CALMIRCO
CM1248-08DE
Trans Voltage Suppressor Diode, 6.1V V(RWM), Unidirectional, 8 Element, Silicon, MO-229C, 8 PIN
CALMIRCO
©2020 ICPDF网 联系我们和版权申明