1N5408RL [ONSEMI]
Axial-Lead Standard Recovery Rectifiers; 轴向引线标准恢复整流器型号: | 1N5408RL |
厂家: | ONSEMI |
描述: | Axial-Lead Standard Recovery Rectifiers |
文件: | 总6页 (文件大小:46K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
1N5400 thru 1N5408
1N5404 and 1N5406 are Preferred Devices
Axial−Lead Standard
Recovery Rectifiers
Lead mounted standard recovery rectifiers are designed for use in
power supplies and other applications having need of a device with the
following features:
http://onsemi.com
Features
• High Current to Small Size
• High Surge Current Capability
• Low Forward Voltage Drop
• Void−Free Economical Plastic Package
• Available in Volume Quantities
• Plastic Meets UL 94 V−0 for Flammability
STANDARD RECOVERY
RECTIFIERS
50−1000 VOLTS
3.0 AMPERES
• These devices are manufactured with a Pb−Free external lead
finish only*
Mechanical Characteristics
AXIAL LEAD
CASE 267−05
STYLE 1
• Case: Epoxy, Molded
• Weight: 1.1 gram (approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes:
220°C Max. for 10 Seconds, 1/16″ from case
MARKING DIAGRAM
• Polarity: Cathode Indicated by Polarity Band
AL
1N
540x
YYWW
AL
= Assembly Location
1N540x = Device Number
x
YY
WW
= 0, 1, 2, 4, 6, 7 or 8
= Year
= Work Week
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of
this data sheet.
Preferred devices are recommended choices for future use
and best overall value.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
Semiconductor Components Industries, LLC, 2004
1
Publication Order Number:
December, 2004 − Rev. 6
1N5400/D
1N5400 thru 1N5408
MAXIMUM RATINGS
Rating
Symbol
1N5400 1N5401 1N5402 1N5404 1N5406 1N5407 1N5408
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V
V
V
50
100
200
400
600
800
1000
V
RRM
RWM
R
Non−repetitive Peak Reverse Voltage
V
100
200
300
525
3.0
800
1000
1200
V
A
RSM
Average Rectified Forward Current
(Single Phase Resistive Load,
I
O
1/2 in. Leads, T = 105°C)
L
Non−repetitive Peak Surge Current
(Surge Applied at Rated Load
Conditions)
I
200 (one cycle)
A
FSM
Operating and Storage Junction
Temperature Range
T
T
stg
− 65 to +170
− 65 to +175
°C
J
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit
values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied,
damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS
Characteristic
Thermal Resistance, Junction−to−Ambient (PC Board Mount, 1/2 in. Leads)
ELECTRICAL CHARACTERISTICS
Characteristic
Symbol
Typ
Unit
R
53
°C/W
q
JA
Symbol
Min
Typ
Max
Unit
V
Forward Voltage (I = 3.0 Amp, T = 25°C)
v
−
−
1.0
F
A
F
Reverse Current (Rated DC Voltage)
T = 25°C
T = 150°C
A
I
R
mA
−
−
−
−
10
100
A
Ratings at 25°C ambient temperature unless otherwise specified.
60 Hz resistive or inductive loads.
For capacitive load, derate current by 20%.
ORDERING INFORMATION
Device
†
Package
Axial Lead
Axial Lead
Axial Lead
Axial Lead
Axial Lead
Axial Lead
Axial Lead
Axial Lead
Axial Lead
Axial Lead
Axial Lead
Axial Lead
Axial Lead
Axial Lead
Shipping
1N5400
500 Units/Box
1200/Tape & Reel
500 Units/Box
1N5400RL
1N5401
1N5401RL
1N5402
1200/Tape & Reel
500 Units/Box
1N5402RL
1N5404
1200/Tape & Reel
500 Units/Box
1N5404RL
1N5406
1200/Tape & Reel
500 Units/Box
1N5406RL
1N5407
1200/Tape & Reel
500 Units/Box
1N5407RL
1N5408
1200/Tape & Reel
500 Units/Box
1N5408RL
1200/Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
2
1N5400 thru 1N5408
NOTE 1 — AMBIENT MOUNTING DATA
Data shown for thermal resistance junction−to−ambient (R
)
qJA
for the mountings shown is to be used as typical guideline values
for preliminary engineering or in case the tie point temperature
cannot be measured.
TYPICAL VALUES FOR R
IN STILL AIR
q
JA
Lead Length, L (IN)
Mounting
Method
R
q
JA
1/8
50
58
1/4
51
59
1/2
53
61
3/4
55
63
1
2
3
°C/W
°C/W
°C/W
28
MOUNTING METHOD 1
P.C. Board Where Available
MOUNTING METHOD 3
P.C. Board with
Copper Surface area is small
1−1/2” x 1−1/2”
Copper Surface
L
L
L = 1/2”
MOUNTING METHOD 2
Vector Push−In Terminals T−28
Board Ground Plane
L
L
http://onsemi.com
3
1N5400 thru 1N5408
200
400
300
Surge Applied
at Rated Load
Conditions
T = 25°C
J
f = 60Hz
100
70
200
TYPICAL
1 CYCLE
50
100
90
80
70
30
20
60
50
40
1.0
2.0 3.0
5.0 7.0 10
20 30
50 70 100
10
7.0
5.0
NUMBER OF CYCLES
Figure 2. Maximum Nonrepetitive Surge Current
8.0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0
3.0
2.0
Resistive Load
Both Leads to Heat
Sink with Lengths
as Shown
L = 1/32”
1/4”
1/2”
1.0
0.7
0.5
0.3
0.2
0.4
0.8
1.2
1.6
2.0
2.4
2.8
3.2
40
60
80
100
120
140
160
180
v
INSTANTANEOUS VOLTAGE (VOLTS)
T LEAD TEMPERATURE (°C)
L,
F,
Figure 1. Forward Voltage
Figure 3. Current Derating Various Lead Lengths
4.0
3.5
3.0
2.5
2.0
1.5
1.0
R
= 28°C/W
I
q
JA
(PK)
= π
I
(AV)
Capacitive Loads
5.0
10
20
R
= 50°C/W
q
JA
I
(PK)
0.5
0
= π
Note for Resistive Load
40 60 80 100
I
(AV)
120
140
160
180
T
TEMPERATURE (°C)
A, AMBIENT
Figure 4. Current Derating PC Board Mounting
http://onsemi.com
4
1N5400 thru 1N5408
PACKAGE DIMENSIONS
AXIAL LEAD
CASE 267−05
ISSUE G
NOTES:
A
K
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
D
1
2
INCHES
DIM MIN MAX
MILLIMETERS
MIN
7.30
4.80
1.20
25.40
MAX
9.50
5.30
1.30
−−−
A
B
D
K
0.287
0.189
0.047
1.000
0.374
0.209
0.051
−−−
B
K
STYLE 1:
PIN 1. CATHODE (POLARITY BAND)
2. ANODE
http://onsemi.com
5
1N5400 thru 1N5408
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
Literature Distribution Center for ON Semiconductor
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Phone: 81−3−5773−3850
For additional information, please contact your
local Sales Representative.
1N5400/D
相关型号:
©2020 ICPDF网 联系我们和版权申明