Z10FW1Y55BC [OMRON]
Common Accessories; 通用配件型号: | Z10FW1Y55BC |
厂家: | OMRON ELECTRONICS LLC |
描述: | Common Accessories |
文件: | 总6页 (文件大小:1184K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Z/A/X/DZ Common Accessories
Ordering Information
■ Terminal Covers (Sold Separately)
Common to Z, A, X, and DZ Models
The Terminal Cover is secured using the switch’s side mounting screws and protects the casing and terminal wires from dust, vibration, or fingers,
thus preventing terminal short-circuiting, ground faults, wire disconnection or improper connection, and electric shock accidents.
Terminal Covers made of phenol resin have five or six thin wall sections.
These sections can be torn open to provide holes for lead cables at desired points.
Application
Mounting direction
Soldering terminal use
Model
Screw terminal use
Remarks
Material
Phenol resin
Side mounting
Side mounting
Side mounting
AP-A
AP-B
---
Metal press mold
Vinyl chloride
AP1-A
AP1-B
Used for AP-A and AP-B
---
AP-Z
Note: Use the ‘Screw-terminal use’ Terminal Cover for DZ-series solder terminal models.
■ Separator (Sold Separately)
Common to Z, A, X, and DZ Models
Model: Separator for Z
■ Actuators (Sold Separately)
Common to Z and X Models
Pin Plunger Switches might need to be actuated by a cam or similar object, in which case, use one of the following Actuators according to the application.
Actuator
Common to Z and X models
Hinge lever
ZAA-1
Hinge roller lever
ZAA-2
Short
ZAQ-3
ZAQ-2
ZAQ-1
Panel mount plunger
Medium
Long
Panel mount roller plunger
ZAQ-22
Note: ZAQ-22 is constructed of ferrous material. Therefore, it cannot be used with the X Switch, because of the permanent magnet contained
within those models. Use the ZAQ-22 external panel mount roller plunger only with the Z or DZ switch.
Z/A/X/DZ Common Accessories
177
Dimensions
Note: Unless otherwise specified, all units are in millimeters and a tolerance of ± 0.4 mm (±0.8 mm for the AP-Z) applies to all dimensions.
■ Terminal Covers
52.8
53.8
25.4
AP-A
AP-B
Screw Terminal Use
(Phenol Resin)
4.3+0.2
4.3+0.2
4.3+0.2
4.3+0.2
25.4
0
0
0
0
Soldering Terminal Use
(Phenol Resin)
8
8
8
16.3
6.4
20.2
6.5
2.15R
2.15R
21
8
21
Note: The Cover has five thin, easy-to-separate
Note: The Cover has six thin, easy-to-separate
portions for easy lead wire connections.
portions for easy lead wire connections.
54.4
25.4
55.4
25.4
AP1-A
Soldering Terminal Use
(Metal Press Mold)
AP1-B
Screw Terminal Use
(Metal Press Mold)
4.3+0.2
4.3+0.2
0
0
4.3+0.2
4.3+0.2
0
0
8
8
17.1
21
2.15R
2.15R
7.2
7
8.5 22.6
8.5 22.6
Note: 1. The Cover has five holes for easy lead wire connections.
2. AP1-A should be used with the AP-A
Note: 1. The Cover has six holes for easy lead wire connections.
2. AP1-B should be used with the AP-B
Two, 4.2 dia.
AP-Z
Pressure plate
(t1 steel)
53
Soldering or Screw Terminal Use
(Vinyl Chloride)
25.4
21
Cable Pull-out Dimension
7
A-A' cross-section
B-B' cross-section
14
6 dia.
13
15 8 dia.
21
39
46
Note: A 6-dia. or 8-dia. cable can be
used by cutting the cable pull-out
hole to the size of the cable to be
used.
A
B
A'
B'
12
14
M3 20 Phillips screw
(with plane washer and nut)
12
Nut
■ Separator
SEPARATOR FOR Z
Two, 4.5 dia.
Note: The separator’s material is EAVTC (Epoxide Alkyd
Varnished Tetron Cloth) and its heat-resisting
temperature is 130°C.
13.5
27
11.9
25.4 0.2
49.2 0.5
t = 0.38
178
Z/A/X/DZ Common Accessories
■ Actuators
Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of ± 0.4 mm applies to all dimensions.
2. These Actuators are not provided with Switches.
Hinge Lever
Two, M4 30
Two, M4
ZAA-1
Model
OF max.
RF min.
PT max.
OT min.
MD max. 2.2 mm
FP max. 32.9±1.6 mm
Z-15G-B
500 gf
170 gf
6 mm
X-10G-B
500 gf
170 gf
6 mm
12.7 mm
3.3 mm
12.7 mm
Stainless steel
60R
Note: This Actuator can be used with the Z-15G(-B)
and X-10G(-B). When mounting the Switch, set
the overtravel to between 32% and 100%, taking
into consideration the operating body and the dis-
tance between the Actuator and the dog.
Two, M4 30
Two, M4
Hinge Roller Lever
ZAA-2
Model
OF max.
RF min.
PT max.
Z-15G-B
500 gf
170 gf
6 mm
X-10G-B
500 gf
170 gf
6 mm
9.5 dia. 4.8
(stainless-steel roller) OT min.
12.7 mm
12.7 mm
3.3 mm
MD max. 2.2 mm
FP max. 44.5±1.6 mm
Stainless steel
58.5R
Note: This Actuator can be used with the Z-15G(-B)
and X-10G(-B). When mounting the Switch, set
the overtravel to between 32% and 100%, taking
into consideration the operating body and the
distance between the Actuator and the dog.
Panel Mount Roller Lever
48
12.7 dia. (Note 1)
ZAQ-22
PT
0.25
23.3
4.8
Two hex nuts
Model
ZAQ-22
Z-15E-B DZ-10G-B
5-mm thickness, 19 mm
between opposing edges
With groove for roller
penetration
OF max. 850 gf
RF min. 114 gf
PT max. 2 mm
1,131 gf
114 gf
2 mm
OP
M12 1 mounting
screw
(Note 3)
18.9
1.6
14.5
dia.
OT min. 3.58 mm 1 mm
20.7
MD max. 0.15 mm 0.46 mm
23.9
OP
37±0.8 mm 35.4±1.2 mm
Note: This Actuator (panel mount roller
plunger) can be used with
Spring washer
(Note 2)
Two, M4 25
screws
0.2
25.4
20.7
standard pin plungers (Z-15G(-B),
Z-15E(-B), and DZ-10G-1A(-1B)).
11.9
49.2
The ZAQ-22 is constructed of
ferrous material. Therefore, It
cannot be used with X switches
due to the permanent magnet used
within those models.
Note: 1. Stainless-steel pin plunger
2. Bronze frame
3. Incomplete screw section part
with a maximum of 1.5 mm.
Z/A/X/DZ Common Accessories
179
Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of ± 0.4 mm applies to all dimensions.
2. These Actuators are not provided with Switches.
Short Panel Mount Plunger
ZAQ-3
7.9 dia.
Model
ZAQ-3
23.3
12SR
(Note 1)
Z-15E-B X-10G-B
M12 1 mounting
screw
OF max.
RF min.
PT max.
OT min.
850 gf
114 gf
0.8 mm
4.8 mm
550 gf
114gf
1 mm
2 t 14 width across
flats
(Note 3)
14.5
dia.
4.5 mm
2 t 15.6 width
across flats
MD max. 0.15 mm 0.2 mm
OP 27.8±1.5 mm
Two M4 nuts
Note: 1. Stainless-steel pin plunger
2. Bronze frame
3. Incomplete screw section part
with a maximum of 1.5 mm
Two M4 25 round
head screw
(Note 2)
Medium Panel Mount Plunger
ZAQ-2
7.9 dia.
Model
ZAQ-2
23.3
12SR
(Note 1)
Z-15E-B X-10G-B
M12 1 mounting
screw
2 t 14 width across
flats
OF max.
RF min.
PT max.
OT min.
850 gf
114 gf
0.8 mm
4.8 mm
550 gf
114 gf
1 mm
4.5 mm
2 t 15.6 width
MD max. 0.15 mm 0.2 mm
OP 53.2±1.5 mm
across flats
14.5
dia.
(Note 3)
Note: 1. Stainless-steel pin plunger
2. Bronze frame
Two M4 25
screw
3. Incomplete screw section part
with a maximum of 1.5 mm
Two M4 nuts
(Note 2)
Long Panel Mount Plunger
ZAQ-1
7.9 dia.
Model
ZAQ-1
23.3
Z-15E-B
X-10G-B
550 gf
12SR
(Note 1)
OF max.
RF min.
PT max.
OT min.
MD max. 0.15 mm
OP
850 gf
114 gf
M12 1 mounting
screw
114 gf
0.8 mm
20.6 mm
1 mm
20.4 mm
0.2 mm
2 t 14 width across
flats
69.1±1.5 mm
2 t 15.6 width
across flats
Note: 1. Stainless-steel pin plunger
2. Bronze frame
14.5
dia.
(Note 3)
3. Incomplete screw section part
with a maximum of 1.5 mm
Two, M4 25 screws
(Note 2)
Two, M4 nuts
Note: Except for the ZAQ-22, these actuators (panel mount plungers) can be used with standard pin plunger versions of the Z and X models.
(Z-15G(-B), Z-15E(-B), X-10G(-B))
180
Z/A/X/DZ Common Accessories
MEMO
Z/A/X/DZ Common Accessories
All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which
can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
11/10
Specifications subject to change without notice
Printed in USA
Cat. No. X303-E-1
Z/A/X/DZ Common Accessories
相关型号:
©2020 ICPDF网 联系我们和版权申明