XF2H-1415-1LW-R500 [OMRON]
Card Edge Connector, 14 Contact(s), 1 Row(s), Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Latch, Natural Insulator;型号: | XF2H-1415-1LW-R500 |
厂家: | OMRON ELECTRONICS LLC |
描述: | Card Edge Connector, 14 Contact(s), 1 Row(s), Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Latch, Natural Insulator PC 连接器 |
文件: | 总36页 (文件大小:705K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Electronic Components
Master Selection Guide
TABLE OF CONTENTS
In t r o d u c t io n 2 -4
Re l ays 5
MOS FET 6
Low Signal 7 - 9
Power PCB 10 - 12
Automotive 13 - 14
General Purpose 15 - 17
Socket Selection Chart 18
Solid-State 19 - 20
S wit c h e s 21
Unsealed Snap Action 22 - 23
Sealed Snap Action 24
Tactile 25
DIP 26
Thumbwheel 27
Special Purpose 27
P h o t o mic r o s e n s o r s 29
Non-Amplified Photo IC 30
Non-Amplified – Reflective 30
Non-Amplified – Phototransistor 31
Mic r o S e n s o r s 32
Pressure, Flow, Shock/Vibration, Tilt 33
Co n n e c t o r s 34
Flexible Printed Circuit 35
Electronic Components:
The Quality, Variety and
Global Support You Need
For switching, sensing and other control applications, Omron Electronic
Components LLC provides quality-driven products and reliable support
to satisfy your design needs and time-to-market goals.
An Experienced P a rtner
Choose Omron and you are working with
one of the world’s largest electronics
manufacturers. With 70 years of experience
and nearly 5 billion US dollars in sales, we
continue to invest heavily in R&D and develop
products based on the latest technologies to
offer you smaller, faster and more efficient
products for a wide range of applications.
Since Omron manufactures a wide range of
relays, switches, sensors and connectors,
we can support your efforts to streamline
vendor lists and reduce the cost of
procurement. Our world-class customer
service provides effective coordination of
OMRON STATISTICS
purchases and delivery to your manufacturing
locations worldwide. Work with our
experienced engineers and customer service
staff to find just the right components for
• Approximately $5 billion sales (April 2004)
your design projects.
• One of Industry Week’s Top 500
Manufacturing Companies (May 2004)
• R&D reinvestment at 7% of sales annually
• #1 Global Market Share in
Relays and Sensors
Qua lity Firs t: Our
Commitment, Your Benefit
Few manufacturers make a conscious choice
to pursue quality as relentlessly as Omron
does. Our commitment to quality shows up in
several important ways that benefit you and
your end customer. Quality engineers are
part of our design and manufacturing team
from the start. We design and test at the
component level, test and correct during
manufacturing, and test every physical,
mechanical and electrical aspect of each
final product before it leaves the factory.
That means you have less rework and
replacements, improved manufacturing
yield, on-time product launches and a
reputation for product reliability that
• Over 300,000 products
• Manufacture 98% of those products
• 23,000 employees worldwide
(April 2004)
• More than 1500 sales and support
locations in 65 countries
reflects well on your company.
P roduct Va riety
Our broad product lines let you choose the
best components for your design without
having to source dozens of vendors. The
products listed in this catalog represent the
diversity in our product lines, but it does not
reflect the full range of options in every case:
RELAYS
MOS FET relays
Low signal relays
High-frequency relays
Power PCB relays
Automotive relays
General-purpose relays
Solid state relays
Technology Lea ders hip
SWITCHES
Snap action switches
Tactile switches
Omron annually invests heavily in R&D to
assure a steady stream of innovations and
product improvements. Many of these
product designs have gone on to become
industry standards.
DIP switches
Dome Array switches
Thumbwheel switches
Rocker switches
• Relays with an innovative lead frame design
and magnetic armature that minimize space
and deliver optimum power efficiency
PHOTOMICROSENSORS (non-amplified)
• Micro strip line construction to maximize
high frequency relay performance features
MICRO SENSORS
Pressure sensors
Tilt sensors
• MEMS technology enhances the reliability of
micro tilt and pressure sensors
Flow sensors
•Double sealed tactile switches for dusty
environments with no compromise on
space savings
Shock/vibration sensors
FLEXIBLE PRINTED CIRCUIT CONNECTORS
Some of these components can be
• Flexible printed circuit connectors with
unique locking levers that assure proper
cable insertion depth and circuit contact
without accidental reopening
customized for your unique application with
special actuators, terminals or wiring. Custom
testing, packaging and marking can shorten or
eliminate incoming inspection and streamline
the inventory processing.
Reduce Adminis tra tive
Cos ts a nd Time
Let Omron help reduce your cost of parts
procurement. Our broad product lines include
many of the components you already use to
populate printed circuit boards – relays,
switches, and connectors. Even if products
are designed one place and assembled in
another, Omron’s customer service provides
a single point of contact to coordinate
deliveries, expedite parts to match changing
manufacturing needs, and manage any
import/export issues.
Design and performance improvements
migrate to successive generations of
products to deliver you the latest
technology in your application.
World Recognized
Vers a tility a nd S upport
Omron products represent the best value in
products and support. Our product designs
meet international safety ratings to speed
certification of machinery for commissioning
or export. With global sales and support that
provides parts and service locally, you can
confidently design in Omron components for
products shipping all over the globe.
Indus tria l Control P roducts
In addition to our control components, Omron offers a wide range of industrial
products and automation systems designed for more robust environments as
well as to help you manufacture the products you design. Time delay relays,
counters, large-load solid state relays, oil-tight pushbuttons and pilot devices,
limit switches, photoelectric and proximity sensors, machine vision, and micro
and board level programmable controllers are managed by our Industrial
Automation Division. Systems to support your manufacturing operation including
automatic identification, motion control, machine vision and systems integration
services are also offered by our Industrial Automation Division.
For More Deta iled Informa tion …
Internet
At www.omron.com/oei you can browse Omron’s full range of electronic components.
Selection Guide
From the front page, select the “Products” tab then choose the product category to reach the selection guide.
It provides these valuable links:
• Quick reading descriptions are linked to data sheet or brochure
• Online cross-reference guide shows Omron’s comparable model if you are trying to match another vendor’s part number.
Find Product Information
To find product information, go to the Document Library. Here you can:
• Download PDFs of our product data sheets, brochures, and more.
• Use our Google‚-powered search engine to find a specific type of part by name or part number family.
Sales and Distributor Locator
Located under the Sales Contacts header, this tool offers an easy-to-use, interactive search for the nearest Omron outlet.
Who Stocks the Part You Want?
Once you have found the right part, find out which
Omron distributor has stock to meet your delivery needs.
• From the Products tab on the front page, go to the relays,
switches, component sensors or FPC connectors pages.
• At the top of the selection guide, click the “Check Stock w/ Disty.” button.
• Fill in the part family number (e.g. G6W) and click “Go.”
• A table shows complete part numbers, distributor name,
quantity, and inventory date.
• Scroll down to find your complete part number and click on the
distributor name.
> Some distributors let you place an order directly.
> Others let you submit an email Request for Quotation (RFQ)
or email your Purchase Order (PO).
Phone
Call us at 1-847-882-2288 Monday through Friday, 7:30 a.m. to 5:00 p.m. Central Standard Time (CST)
for more detailed product information, and/or the location of your local sales office or Omron distributor.
RELAYS
Om ron is the #1 relay seller worldwide,
producing a steady stream of innovative
relays that perform in any environm ent
and industry. Our relays do everything
from m axim ize space (G6K & G6J-Y)
to setting industry standards (G6S)
to giving you m ultiple m ounting options
(G2R). We have continuously introduced
technical innovations that have
increased switching efficiency without
com prom ising com petitive pricing. To
browse the entire relay product line visit
our website at www.omron.com/oei.
Re l ays - MO S FET
MO S FET
PCB Mount
G3VM
G3VM SMT
G3VM SOP
G3VM SSOP
Dimensions mm (in) Please refer to data sheet for all Please refer to data sheet for all Please refer to data sheet for all 4 pin:
dimension information
dimension information
dimension information
3.8 L x 2.04 W x 1.8 H
(0.15 x 0.08 x 0.07)
Features • Solid-state relay with
MOS FET output and
• Solid-state relay with
MOS FET output and
photo-LED input
• Solid-state relay with
MOS FET output and
photo-LED input
• Solid-state relay with
MOS FET output and
photo-LED input
photo-LED input
• Ideal for communications
(telecom and datacom),
computer peripheral, office
automation, security, and
control applications
• Ideal for communications
(telecom and datacom),
computer peripheral, office
automation, security, and
control applications
• Ideal for communications
(telecom and datacom),
computer peripheral, office
automation, security, and
control applications
• Ideal for communications
(telecom and datacom),
computer peripheral, office
automation, security, and
control applications
• Low ON resistance and
low output capacitance
versions ideal for ATE
and Instrumentation
• Low ON resistance and
low output capacitance
versions ideal for ATE
and Instrumentation
Load voltage 60 – 600 V
20 – 600 V
20 – 400 V
20 – 40 V
Contact form 1 Form A, 2 Form A, 1 Form B, 1 Form A, 2 Form A, 1 Form B, 1 Form A, 2 Form A, 1 Form B, 1 Form A
2 Form B, 1 Form A+1 Form B 2 Form B, 1 Form A+1 Form B 2 Form B
Load current 100 – 2000 mA
120 – 2000 mA
80 – 1250 mA
1500 VAC
80 – 300 mA
1500 VAC
Dielectric strength 1500 VAC, 2500 VAC,
(50/60 Hz for 1 minute) 5000 VAC
1500 VAC, 2500 VAC,
5000 VAC
Surge withstand 3,000 VAC, 5,000 VAC,
(50/60 Hz for 1 second) 10,000 VAC
3,000 VAC, 5,000 VAC,
10,000 VAC
3,000 VAC
3,000 VAC
ON resistance 0.12 – 45 Ohm
Output capacitance 30 – 1400 pF
Packaging Tube
0.12 – 35 Ohm
8 – 1400 pF
0.15 – 35 Ohm
1.5 – 35 Ohm
1.0 – 14 pF
2.5 – 1000 pF
Tube or tape and reel
Tube or tape and reel
Tape and reel
Additional features Low ON resistance, current
Low ON resistance, current
limiting, high I/O isolation
Low ON resistance, low output Low ON resistance, low output
capacitance capacitance
limiting, high I/O isolation
6
Re l ays - Lo w S ig n a l
Lo w S ig n a l
G5V-1
G6H
G6J-Y
G6K
Dimensions mm (in) 10.0 H x 12.50 L x 7.50 W
5.08 H x 13.97 L x 8.89 W
(0.20 x 0.55 x 0.35)
10.0 H x 10.6 L x 5.7 W
(0.39 x 0.42 x 0.22)
5.30 H x 10.20 L x 6.70 W
(0.21 x 0.40 x 0.26)
(0.39 x 0.49 x 0.30)
Switching 1 A max., 1 mA min.
1 A max., 10 µA min.
0.3 A AC/1 A DC, 10 µA min.
1 A max., 10 µA min.
Features • 150 mW power consumption • Low profile (5 mm type)
• Fully-sealed
• Pb-free construction
• 2.5 kV surge withstand
• Extremely small size
• 2.5 kV surge withstand
• SMT and PCB versions
• Small size
• SMT and PCB versions
• 1.5 kV surge withstand
• 1.5 kV surge withstand
• Available in PCB
Contact Ratings
Contact form 1 Form C
Contact type Single crossbar
2 Form C
2 Form C
2 Form C
Bifurcated crossbar
Ag with Au clad
Bifurcated crossbar
Ag with Au alloy clad
Bifurcated crossbar
Ag with Au clad
Contact material Ag with Au clad
Max. operating current 1 A
1 A
1 A
1 A
under resistive load
Max. operating voltage 125 VAC, 60 VDC
125 VAC, 110 VDC
62.5 VA, 33 W
125 VAC, 110 VDC
37.5 VA, 30 W (NO)
125 VAC, 60 VDC
37.5 VA, 30 W
Max. switching capacity 62.5 VA, 30 W
under resistive load
Minimum permissible load 1 mA, 5 VDC
10 µA, 10 mVDC
10 µA, 10 mVDC
10 µA, 10 mVDC
Rated load 0.5 A at 125 VAC, 1 A at
(under resistive load) 24 VDC
0.5 A at 125 VAC, 1 A at
30 VDC
0.3 A at 125 VAC,
1 A at 30 VDC
0.3 A at 125 VAC,
1 A at 30 VDC
Coil Ratings
Coil voltage 5, 6, 9, 12, 24 VDC
Power consumption 150 mW
3, 5, 6, 9, 12, 24, 48 VDC
140 mW (standard)
3, 4.5, 5, 12, 24 VDC
3, 4.5, 5, 6, 9, 12, 24 VDC
Approx. 140 mW
100 mW (standard and latching)
(approx. 230 mW for DC24)
Dielectric strength 1,000 VAC
1,000 VAC
1,500 VAC
1,500 VAC
(50/60 Hz for 1 minute)
Surge withstand 1.5 kV (10 x 160 µs)
1.5 kV (10 x 160 µs)
100,000 minimum
2.5 kV (2 x 10 µs)
100,000 minimum
SMT gullwing
2.5 kV (2 x 10 µs)
100,000 minimum
Gullwing, "inside-L," PCB
Electrical service life 100,000 minimum
(operations)
Terminal choices PCB
PCB (G6H),
SMT gullwing (G6H-2F)
Packaging
–
–
Tape and reel
Tape and reel
Approved standards UL, CSA
UL, CSA, (FCC Part 68)
UL, CSA, (FCC Part 68)
UL, CSA, (FCC Part 68)
7
Re l ays - Lo w S ig n a l
Lo w S ig n a l
G6L
G5V-2
G6A
G6S
Dimensions mm (in) 4.2 H x 10.6 L x 7.0 W
11.43 H x 20.32 L x 9.91 W
(0.45 x 0.80 x 0.39)
8.40 H x 20.20 L x 10.10 W
(0.33 x 0.80 x 0.40)
9.40 H x 15L x 7.50 W
(0.37 x 0.59 x 0.30)
(0.17 x 0.42 x 0.28)
Switching 1 A max., 1 mA min.
2 A max., 10 µA min.
2 A max., 10 µA min.
2 A max., 10 µA min.
Features • Very low profile
• 1.5 kV surge withstand
• SMT and PCB versions
• 150 mW, 360 mW, 500 mW
versions
• Industry standard footprint
• 1.5 kV surge withstand
• 200 mW, 400 mW versions
• 1.5 kV surge withstand
• Latching versions available
• 2.5 kV surge withstand
• SMT and PCB versions
• European versions available
Contact Ratings
Contact form 1 Form A
Contact type Single crossbar
Contact material Ag with Au clad
2 Form C
2 Form C, 4 Form C
Bifurcated crossbar
2 Form C
Bifurcated crossbar
Ag with Au clad
Bifurcated crossbar
Ag with Au clad; AgPd with
Au clad
Ag with Au clad;
AgPd with Au clad
Max. operating current 1 A
2 A (1 A ultra-sensitive)
2 A
2 A
under resistive load
Max. operating voltage 125 VAC, 60 VDC
125 VAC, 125 VDC
62.5 VA, 60 W
250 VAC, 220 VDC
125 VA, 60 W
250 VAC, 220 VDC
62.5 VA, 60 W
Max. switching capacity 37.5 VA, 24 W
under resistive load
Minimum permissible load 1 mA, 5 VDC
10 µA, 10 mVDC
10 µA, 10 mVDC
10 µA, 10 mVDC
Rated load 0.3 A at 125 VAC,
(under resistive load) 1 A at 24 VDC
0.5 A at 125 VAC, 2 A at
30 VDC
0.5 A at 125 VAC, 2 A at
30 VDC; 0.3 at 125 VAC, 1 A
at 30 VDC
0.5 at 125 VAC,
2 A at 30 VDC
Coil Ratings
Coil voltage 3, 4.5, 5, 12, 24 VDC
Power consumption 180 mW (standard)
3, 5, 6, 9, 12, 24, 48 VDC
3, 5, 6, 9, 12, 24, 48 VDC
3, 4.5, 5, 6, 9, 12, 24 VDC
500 mW (standard), 360 mW
(high-sensitivity), 150 mW
(ultra-sensitive)
200 mW (DPDT standard),
180 mW (DPDT latching),
360 mW (4PDT standard)
140 mW (standard)
140 mW, 200 mW (latching)
Dielectric strength 1,000 VAC
1,000 VAC
1,000 VAC
2,000 VAC standard
(50/60 Hz for 1 minute)
Surge withstand
–
1.5 kV (10 x 160 µs)
300,000 minimum
1.5 kV (10 x 160 µs)
500,000 minimum
2.5 kV (2 x 10 µs)
100,000 minimum
Electrical service life 100,000 minimum
(operations)
Terminal choices PCB, SMT Gullwing
Packaging Tape and reel
PCB
–
PCB
Gullwing, “inside L,” PCB
Tape and reel
–
Approved standards UL/CSA (FCC Part 68)
UL, CSA
UL, CSA, (FCC Part 68)
UL, CSA, (FCC Part 68)
8
Re l ays - Lo w S ig n a l H F
Lo w S ig n a l H F
G6W
G6Y
G6Z
G6K-RF
Dimensions mm (in) 8.9 H x 20 L x 9.4 W
(0.35 x 0.79 x 0.37)
9.20 H x 20.70 L x 11.70 W
(0.36 x 0.81 x 0.46)
8.9 H x 20 L x 8.6 W
(0.35 x 0.79 x 0.34)
5.4 H x 10.3 L x 6.9 W
(0.21 x 0.41 x 0.27)
Switching 0.5 A max.
1 A max., 10 mA min.
0.5 A max.
1 A max.
Features • Latching versions available
• Tri-plate micro strip line
technology
• Micro strip line technology
• Fully sealed construction
• 75 Ω and 50 Ω impedance
versions
• Latching versions available
• Micro strip line technology
• Reverse contact arrangements
available
• 100 mW power consumption
• Latching versions available
• Reverse contact arrangements
available
• Y and E terminal arrangements
available
HF Characteristics
Isolation 65 dB (2 GHz)
60 dB (2.5 GHz)
65 dB (900 MHz)
0.5 dB (900 MHz)
1.5 (900 MHz)
60 - 65 dB (900 MHz)
30 - 45 dB (2.6 GHz)
20 - 30 dB (1 GHz)
0.2 dB (1 GHz)
1.2 (1 GHz)
40 dB (5.0 GHz)
Insertion Loss 0.2 dB (2 GHz)
0.2 dB (2.5 GHz)
0.1 - 0.2 dB (900 MHz)
0.3 - 0.5 dB (2.6 GHz)
0.4 dB (5.0 GHz)
VSWR 1.2 (2 GHz)
1.2 (2.5 GHz)
1.1 - 1.2 (900 MHz)
1.3 - 1.5 (2.6 GHz)
1.5 (5.0 GHz)
Contact Ratings
Contact form 1 Form C
Contact type Twin crossbar
Contact material Au clad Cu alloy
1 Form C
1 Form C
2 Form C
Twin crossbar
Au clad Cu alloy
0.5 A
Twin crossbar
Au clad Cu alloy
0.5 A
Bifurcated crossbar
Au alloy on Ag base
1 A
Max. operating current 0.5 A
under resistive load
Max. operating voltage 30 VDC, 30 VAC
30 VAC, 30 VDC
10 VA, 10 W
30 VAC, 30 VDC
10 VA, 10 W
60 VDC, 125 VAC
37.5 VA, 30 W
Max. switching capacity 10 VA, 10 W
under resistive load
Rated load 10 mA at 30 VAC
(under resistive load) 10 mA at 30 VDC
2.5 GHz, 10 W
10 mA at 30 VAC;
10 mA at 30 VAC;
900 MHz, 1 W
10 mA at 30 VAC;
10 mA at 30 VDC;
900 MHz, 10 W
0.3 A, 125 VAC;
1 A, 30 VDC
Coil Ratings
Coil voltage 3, 4.5, 9, 12, 24 VDC
3, 4.5, 5, 6, 9, 12, 24 VDC
200 mW
3, 4.5, 5, 9, 12, 24 VDC
3, 4.5, 5, 6, 9, 12, 24 VDC
100 mW
Power consumption 200 mW (standard)
200 mW (single latching)
200 mW (standard)
200 mW (single latching)
360 mW (dual latching)
360 mW (dual latching)
Dielectric strength 1,000 VAC
1,000 VAC
1,000 VAC
750 VAC
(50/60 Hz for 1 minute)
Electrical service life 1,000,000 minimum
100,000 minimum
1,000,000 minimum
100,000 minimum
(operations)
Terminal choices PCB, SMT Gullwing
PCB
–
PCB, SMT Gullwing
Tape and reel
SMT Gullwing
–
Packaging
–
9
Re l ays - P o we r P CB
P o we r P CB
G5PA
G6D
G5SB
G5B
G6B
Dimensions mm (in) 25 H x 24 L x 10 W
12.5 H x 17.5 L x 6.5 W 15.8 H x 20.3 L x 10.3 W 14 H x 22.1 L x 11.43 W 9.91 H x 20.07 L x 9.91 W
(0.98 x 0.94 x 0.39) max. (0.49 x 0.69 x 0.26)
(0.62 x 0.80 x 0.41)
(0.55 x 0.87 x 0.45)
(0.39 x 0.79 x 0.39)
Switching 5 A max.
5 A max.
5 A (NO)/3 A (NC) max. 8 A max.
8 A max.
Features • TV5 rated
• Subminiature, slim
lightweight design
• Pb-free, Cd-free
• High insulation
between coil and
contacts
• Impulse withstand of
8kVAC
• Low profile
• Low power consumption
• High surge withstand
• Subminiature and low
power
• Sealed construction
• Latching types
available
• Slim style
• Semi-sealed, SPST-NO • Low power
consumption
• Sealed construction
Contact Ratings
Contact form 1 Form A
1 Form A
1 Form C
1 Form A
1 Form A, 2 Form A,
1 Form A + 1 Form B
Standard contact type Single button
Single button
Ag Alloy
5 A
Single button
Ag Alloy
Single button
Ag, Ag Alloy
Single button
Ag Alloy
Standard contact material AgSnO
2
Max. operating current 5 A
under resistive load
5 A (NO Contact)
3 A (NC Contact)
3 A; 8 A (high capacity) 5 A
Max. operating voltage 250 VAC, 30 VDC
250 VAC, 30 VDC
1,250 VA, 150 W
250 VAC, 30 VDC
250 VAC, 30 VDC
380 VAC, 125 VDC
Max. switching capacity 1,250 VA, 150 W
1,250 VA, 150 W (NO)
750 VA, 30 W (NC)
750 VA, 90 W;
2,000 VA, 240 W
1,250 VA, 150 W
under resistive load
Minimum permissible load 100 mA, 5 VDC
10 mA, 5 VDC
10 mA, 5 VDC
10 mA, 5 VDC
10 mA, 5 VDC
Rated load 5 A at 250 VAC, 30 VDC 5 A at 250 VAC, 5 A
3 A (NO)/3 A (NC)
at 125 VAC;
3 A at 125 VAC, 30 VDC; 5 A at 250 VAC, 5A
8 A at 125 VAC, 30 VDC at 30 VDC
(under resistive load)
at 30 VDC
5 A (NO)/3 A (NC)
at 125 VAC;
5 A (NO)/3 A (NC)
at 250 VAC;
5 A (NO)/3 A (NC)
at 30 VDC
Coil Ratings
Coil voltage 6, 12, 24 VDC
5, 12, 24 VDC
200 mW
5, 9, 12, 24 VDC
Approx. 400 mW
5, 12, 24 VDC
360 mW
5, 6, 12, 24 VDC
Power consumption 530 mW, 250 mW
200 mW (standard
and latching)
(high sensitivity)
Dielectric strength 4,000 VAC
(50/60 Hz for 1 minute)
3,000 VAC
4,000 VAC (coil to
contacts)
4,000 VAC
3,000 VAC
1,000 VAC (between
contacts)
Electrical service life 100,000 minimum
100,000 minimum
For resistive loads:
200,000: 3 A (NO)/
3 A (NC) at 125 VAC;
50,000: 5 A (NO)/
3 A (NC) at 125 VAC;
50,000: 5 A (NO)
at 250 VAC;
100,000 minimum
100,000 minimum
(operations)
10,000: 3 A (NC)
at 250 VAC;
10,000: 5 A (NO)/
3 A (NC) at 30 VDC
Terminal choices PCB
Accessories N/A
PCB
PCB
N/A
PCB
N/A
PCB
Socket for back
connecting sockets with
PCB terminals
Sockets and clips for
back connecting sockets
with PCB terminals
Approved standards UL, CSA, SEV, SEMKO,
UL, CSA, TUV, SEV
UL, CSA (VDE pending)
UL, CSA, TUV
UL, CSA, (FCC Part 68)
TUV
10
Re l ays - P o we r P CB
P o we r P CB
G6RN
G5LE
G5Q
G6C
G4W
Dimensions mm (in) 15 H x 28.5 L x 10 W
19 H x 22.5 L x 16.5 W
(0.75 x 0.89 x 0.65)
15.8 H x 20.3 L x 10.3 W 9.91 H x 20.07 L x 14.99 W 31 H x 45 L x 20 W
(0.59 x 1.12 x 0.39)
(0.62 x 0.80 x 0.41) max. (0.39 x 0.79 x 0.59)
(1.22 x 1.77 x 0.79)
Switching 8 A max.
10 A max.
10 A max. (NO contacts) 10 A max.
15 A max.
Features • 8 mm coil/contact
spacing
• Small ‘ice cube’ size
• UL Class B insulation
• VDE, Class F options
• Compact PCB relay
with high insulation
• Withstands impulse of
8 kV coil to contacts
• Class F coil insulation
• Low coil power
• Low power
consumption
• Low profile
• High surge withstand
• 10 mm creepage
distance
• Low profile
• Sealed construction
• Ideal for switching
contactors, solenoids
and motors
• Latching types available • QC load/coil terminals
consumption
Contact Ratings
Contact form 1 Form A, 1 Form C
1 Form A, 1 Form C
Single button
1 Form A, 1 Form C
1 Form A + 1 Form B,
1 Form A
1 Form A, 2 Form A
Standard contact type Single button
Single button
Ag Alloy
Single button
Ag Alloy
Single button
Ag Alloy
15 A
Standard contact material AgNi + gold plating
AgSnO
2
Max. operating current 8 A
under resistive load
10 A
10 A (SPDT-NO), 3 A
(SPDT-NC),
10 A (SPST-NO);
8 A (SPST-NO+SPST-NC)
10 A (SPST-NO)
Max. operating voltage 250 VAC, 125 VDC
250 VAC, 125 VDC
1,200 VA, 240 W
277 VAC, 30 VDC
380 VAC, 125 VDC
250 VAC, 125 VDC
3,750 VA
Max. switching capacity 2,000 VA, 150 W
1250 VA, 150 W (NO)
375 VA, 90 W (NC)
2,500 VA, 300 W;
2,000 VA, 240 W
(SPST-NO+SPST-NC)
under resistive load
Minimum permissible load 10 mA, 5 VDC
100 mA, 5 VDC
10 mA at 5 VDC
10 mA, 5 VDC
100 mA, 5 VDC
Rated load 8 A at 250 VAC; 5 A at
(under resistive load) 30 VDC
10 A at 120 VAC, 8 A at
30 VDC
10 A at 125 VAC (SPDT-NO) 10 A at 250 VAC, 10 A at 15 A at 250 VAC, 15 A at
3 A at 250 VAC (SPDT-NO) 30 VDC; 8 A at 250 VAC, 24 VDC
5 A at 30 VDC (SPDT-NO) 8 A at 30 VDC
3 A at 125 VAC (SPDT-NC)
3 A at 30 VDC (SPDT-NC)
10 A at 125 VAC (SPST-NO)
3 A at 250 VAC (SPST-NO)
5 A at 30 VDC (SPST-NO)
Coil Ratings
Coil voltage 5, 6, 12, 24 VDC
Power consumption 220 mW
5, 6, 12, 24, 48 VDC
400 mW
5, 12, 24 VDC
5, 6, 12, 24 VDC
12, 24 VDC
800 mW
400 mW (SPDT);
200 mW (SPST-NO)
200 mW (standard and
single coil latching)
Dielectric strength 4,000 VAC
2,000 VAC
4,000 VAC
2,000 VAC
4,000 VAC
(50/60 Hz for 1 minute)
(coil to contacts);
1,000 VAC
(between contacts)
Electrical service life 100,000 approx.
100,000 minimum
200,000: 3 A(NO)/3 A
(NC) at 125 VAC resistive;
100,000: 3 A (NO)/3 A
(NC) at 250 VAC; 5 A
(NO)/3 A (NC) at
100,000 minimum
100,000 minimum
(operations)
30 VDC resistive;
50,000: 10 A (NO) at 125
VAC (900 ops. per hour)
Terminal choices PCB
Accessories N/A
PCB
N/A
PCB
PCB
PCB, quick-connect,
solder
N/A
Socket for back
–
connecting sockets with
PCB terminals
Approved standards UL, CSA, TUV, VDE, IEC UL, CSA, TUV, (VDE
UL, CSA, VDE
UL, CSA, VDE, SEV
UL, CSA, VDE, SEMKO,
TUV
available)
11
Re l ays - P o we r P CB
P o we r P CB
G2R
G2RL
G4A
G8PT
Dimensions mm (in) 25.5 H x 29 L x 13 W
15.5 H x 29 L x 12.7 W
(0.61 x 1.14 x 0.50)
32.5 H x 30.5 L x 16 W
(1.28 x 1.20 x 0.63)
Varies by type
(1 x 1.14 x 0.51)
Switching 16 A max.
16 A max.
20 A max.
30 A max. (SPST)
20 A/10 A max. (SPDT)
Features • High dielectric withstand
• 8 mm coil/contact spacing
• 1 and 2 pole models
• Class B insulation
• Low profile
• High isolation
• Class F insulation
• Low power consumption
• Small size
• High switching capacity
• High switching capacity
• QC load terminals
• Standard semi-sealed
construction
• UL Class F insulation standard
• Wide range of coil ratings
• Sealed and Open frame models
• UL508/UL873 spacing Column A
• High impulse withstand of 6kV
coil to contacts including the
6kV 100kHz ring wave
• 3 mm contact gap version
available
(per IEC 1000-4-12)
Contact Ratings
Contact form 1 Form A, 1 Form C, 2 Form A,
1 Form A, 1 Form C, 2 Form A,
2 Form C
1 Form A
1 Form A, 1 Form C
2 Form C
Standard contact type Single button
Standard contact material Ag Alloy
Single button
Single button
Ag Alloy
20 A
Single button
Ag Alloy
AgSnO (1 pole); AgNi (2 pole)
2
16 A (high capacity, 1-pole);
10 A (general purpose, 1-pole);
5 A (general purpose, 2-pole);
5 A (latching, 1-pole);
Max. operating current
under resistive load
16 A (high capacity, 1-pole);
12 A (general purpose, 1-pole);
8 A (2-pole)
AC 30 A, DC 20 A (SPST-NO);
AC 20/10 A, DC 20/10 A* (SPDT)
*NO contact/NC contact
5 A (high sensitivity, 1-pole);
3 A (high sensitivity, 2-pole);
3 A (latching, 2-pole)
Max. operating voltage
440 VAC
250 VAC
5,000 VA
250 VAC, 28 VDC
380 VAC, 125 VDC
Max. switching capacity
under resistive load
4,000 VA, 384 W (high
7,500 VA, 560 W (SPST-NO);
5,000/2,500 VA, 560/280 W*
(SPDT) *NO contact/NC contact
4,000 VA, 480 W (1 pole);
1,250 VA, 150 W (2 pole)
capacity, 1-pole); 3,000 VA,
288 W (general purpose 1-pole);
2,000 VA, 240 W (2 pole)
Minimum permissible load
40 mA, 24 VDC
100 mA, 5 VDC
DC 5 V, 500 mA
1 pole: 100 mA, 5 VDC;
2 pole: 10 mA, 5 VDC
Rated load
(under resistive load)
16 A at 250 VAC, 24 VDC (high 20 A at 250 VAC
capacity 1 pole); 12 A at 250
VAC, 24 VDC, General purpose
(1 pole); 8 A at 250 VAC, 30
VDC, (2 pole)
30 A at 250 VAC, 20 A at
16 A at 250 VAC, 30 VDC (high
capacity); 10 A at 250 VAC, 30
VDC, General purpose (1 pole);
5 A at 250 VAC, 30 VDC,
28 VDC (SPST-NO); 20/10 A*
at 250 VAC, 20/10 A at 28 VDC
*NO contact/NC contact
General purpose (2 pole)
Coil Ratings
Coil voltage
5, 12, 24, 48 VDC
5, 12, 24 VDC
5, 9, 12, 24, 48, 110 VDC
Approx. 900 mW
12, 24, 120, 240 VAC;
5, 6, 12, 24, 48 VDC
Power consumption
400 mW (430 mW for 48 VDC) 0.9 W
0.9 VA, 530 mW, 360 mW (high
sensitivity); 850 mW (set),
600 mW (reset) latching
Dielectric strength
(50/60 Hz for 1 minute)
5,000 VAC
4,500 VAC
2,500 VAC, 50/60 Hz for 1
minute (coil to contacts); 1,500
VAC, 50/60 Hz for 1 minute
(between contacts)
5,000 VAC
Electrical service life
(operations)
Consult catalog page
PCB
100,000 minimum
100,000 minimum
100,000 minimum
Terminal choices
PCB (coil and load),
quick-connect (load)
or PCB (coil and load)
PCB, PCB, and quick-connect
load terminals, flange mount
quick-connect terminals
PCB terminal, plug in
and quick-connect
Accessories
–
–
–
N/A
Approved standards UL, CSA, SEV SEMKO, VDE,
UL, CSA, VDE
UL, CSA, TUV
UL/CSA, VDE
TUV
12
Re l ays - Au t o mo t ive
Au t o mo t ive
G8QN
G8QW
G8JN
Dimensions mm (in) 14.4 H x 12.5 L x 16 W
(0.56 x 0.49 x 0.63)
14.4 H x 25.5 L x 16 W
(0.56 x 1.00 x 0.63)
25 H x 28 L x 28 W
(0.98 x 1.10 x 1.10)
Switching 30 A max.
30 A max.
35 A max.
Features • Miniature automotive high performance
single PCB relay
• Miniature automotive high performance
dual PCB relay
• General purpose automotive power relay
• Mini ISO footprint
• Fully sealed construction
• Fully automated assembly
• Suitable for reverse motor
applications (2 relays)
• Fully sealed construction
• Fully automated assembly
• Perfect for reverse motor applications
• Made in USA
• Handles heavy automotive load
• High current path fully welded; reduces
heat buildup at full load
• Wide temperature range:
-40°C to + 125°C
• Made in USA
• Made in North America
Contact Ratings
Contact form 1 Form C
2 Form C
1 Form C
Single Button
AgSnIn
Standard contact type Single button
Standard contact material AgSnO
Single button
AgSnO
Max. operating current 30 A (at 20°C for 1 hour)
Max. operating voltage 16 VDC
30 A (at 20°C for 1 hour)
16 VDC
35 A (NO) / 20 A (NC)
16 VDC
Minimum permissible load 100 mA
100 mA
–
Rated load 10 A carry current at 85°C
10 A carry current at 85°C
30 A inrush current at 16 VDC
35 A (NO) / 20 A (NC) carry current
100 A (NO) / 40 A (NC) inrush current
30 A inrush current at 16 VDC
Coil Ratings
Coil voltage 12 VDC
Power consumption 685 mW
12 VDC
12 VDC
1.85 W
685 mW
Dielectric strength 1.0 mA max. leakage at 440 VAC, 60 Hz for 1.0 mA max. leakage at 440 VAC, 60 Hz for 800 VDC for 1 minute
(50/60 Hz for 1 minute between coil and contacts and
1 minute) between N.O and N.C. contacts
1 minute between coil and contacts and
between N.O and N.C. contacts
Electrical service life 100,000 operations min.
(operations) (load dependant)
100,000 operations min.
(load dependant)
100,000 operations min.
(14 V / 35 A)
Terminal choices PCB
Accessories N/A
PCB
N/A
N/A
Plug-in
N/A
Approved standards N/A
N/A
13
Re l ays - Au t o mo t ive
Au t o mo t ive
G8W
G8H
G8HN
Dimensions mm (in) 25.4 H x 28.5 L x 28.5 W
26 H x 15.5 L x 23 W
(1.02 x 0.61 x 0.91)
SPST: 26.0 H x 15.3 L x 22.8 W
(1.02 x 0.60 x 0.88)
(1.00 x 1.12 x 1.12)
SPDT: 26.8 H x 15.5 L x 23 W
(1.06 x 0.61 x 0.91)
Max. switching current 35 A max.
60 A max.
60 A max.
Features • General purpose automotive power relay • Micro ISO automotive relay
• Micro ISO automotive relay
• Lower power consumption than G8H
• Plug-in types
• Fully automated assembly
• Wide temperature range:
-40°C to + 125°C
• Mini 280 footprint
• Choice of PCB or plug-in types
• Fully automated assembly
• Wide temperature range:
-40°C to + 125°C
• Handles heavy automotive load
• High current path fully welded; reduces
heat buildup at full load
• Wide temperature range:
-40°C to + 125°C
• Environment-friendly
• Light weight
• Environment-friendly
• Light weight
• Made in North America
• Made in USA
• Made in USA
Contact Ratings
Contact form 1 Form A, 1 Form C
Standard contact type Single Button
Standard contact material
1 Form A, 1 Form C
Single button
AgSnO
1 Form A, 1 Form C
Single button
AgSnO
–
Max. operating current 35 A (NO) / 20 A (NC)
Max. operating voltage 16 VDC
20 A (NO) / 10 A (NC)
16 VDC
20A (NO) / 10 A (NC)
16 VDC
Minimum permissible load
–
1 A
1 A
Rated load 35 A (NO) / 20 A (NC) carry current 100 A 20 A (NO) / 10 A (NC) steady
20 A (NO) / 10 A (NC) steady
60 A (NO) / 30 A (NC) inrush
(NO) / 20 A break (NO)
60 A (NO) / 30 A (NC) inrush
Coil Ratings
Coil voltage 12 VDC
12 VDC
12 VDC
Power consumption
–
–
1440 mW
1309 mW
Dielectric strength
(50/60 Hz for 1 minute)
1.0 mA max. leakage at 500 VAC, 50-60 Hz 1.0 mA max. leakage at 440 VAC, 50-60 Hz
for 1 minute between coil and contacts and for 1 minute between coil and contacts and
between contacts
between contacts (10 MOhm min. for
SPST)
Electrical service life 100,000 operations min.
(operations) (14 V / 35 A)
100,000 operations min.
(load dependant)
100,000 operations min.
(load dependant)
Terminal choices Plug-in
Accessories N/A
Plug-in or PCB
Plug-in
N/A
N/A
N/A
Approved standards N/A
N/A
14
Re l ays - Ge n e r a l P u r po s e
Ge n e r a l P u r po s e
MK
MY
LY
Dimensions mm (in) 52.58 H x 34.54 L x 34.54 W
36 H x 28 L x 21.5 W
(1.42 x 1.10 x 0.85)
35.56 H x 27.94 L x 21.59 W
(1.40 x 1.10 x 0.85)
(2.07 x 1.36 x 1.36)
Switching 10 A max.
10 A max. (2 pole); 5 A max.
(4 pole)
15 A max.
Features • Octal base plug-in
• Exceptional reliability
• Ideal for sequence control and
power switching applications
• Name plate and mechanical
indicator standard
• Compact power relay
• LED, Push-to-test button,
bifurcated contacts and other
features available
• Push-to-test button standard
• Variations include push-to-test,
LED and bifurcated contacts
• Hermetic version available
(MY4H)
Contact Ratings
Contact form 2 Form C, 3 Form C
2 Form C, 4 Form C
1 Form C, 2 Form C,
3 Form C, 4 Form C
Contact type Single button
Contact material Ag
Single button, bifurcated button
AgNi
Single button
Ag Alloy
Max. operating current 10 A
under resistive load
10 A (DPDT);
5 A (4PDT)
15 A (SPDT);
10 A (DPDT, 3PDT, 4PDT)
Max. operating voltage 250 VAC, 250 VDC
250 VAC, 125 VDC
250 VAC, 125 VDC
Max. switching capacity 2 pole: 2,500 VA, 280 W; 3 pole: 2,500
under resistive load VA/1,250 VA 280 W
2 pole: 2,500 VA, 300 W; 4 pole:
1,250 VA, 150 W
1 pole: 1,700 VA, 360 W; 2, 3, 4 poles:
1,100 VA, 240 W
Minimum permissible load 100 mA, 1 VDC
2 pole: 1 mA, 5 VDC;
4 pole: 1 mA, 1 VDC
100 mA, 5 VDC
Rated load 2 pole: 10 A at 250 VAC, 28 VDC; 3 pole: 10 2 pole: 5 A at 250 VAC, 30 VDC;
1 pole: 15 A at 110 VAC,
24 VDC; 2, 3, 4 pole:
(under resistive load) A at 250 VAC, 28 VDC
4 pole: 3 A at 250 VAC, 30 VDC
10 A at 110 VAC, 24 VDC
Coil Ratings
Coil voltage 12, 24, 110/120, 220/240 VAC;
6, 12, 24, 48, 110/120,
220/240 VAC; 6,12, 24, 48, 100/110 VDC
12, 24, 110/120, 220/240 VAC,
12, 24, 48, 100 VDC
12, 24, 48, 100 VDC
Power consumption 2.7 VA, 1.5 W
Approx. 1.1 VA, 0.9 W
1.1 VA, 0.9 W (1 pole);
1.1 VA, 0.9 W (DPDT);
1.6 VA, 1.4 W (3PDT);
1.95 VA, 1.5 W (4PDT)
Dielectric strength 2,000 VAC
2,000 VAC
2,000 VAC
(50/60 Hz for 1 minute)
Electrical service life 100,000 minimum
2P 500,000 at 5 A,
100,000 at 10 A;
4P 500,000 at 3 A,
100,000 at 5 A
200,000 minimum,
500,000 minimum (2P)
(operations)
Terminal choices Plug-in
PCB terminal, plug-in
Track mounted sockets PCB terminal, plug-in
Accessories Sockets and clips for track mounted
sockets with screw terminals and back
connecting sockets with solder and PCB
terminals
Sockets and clips for track mounted
sockets with screw terminals and back
connecting sockets with solder and PCB
terminals
Sockets and clips for track mounted
sockets with screw terminals and back
connecting sockets with solder and PCB
terminals
Note: PYF-S series screwless clamp
terminal socket available
Approved standards UL, CSA, TUV, VDE
UL, CSA, SEV, CE, VDE
UL, CSA, SEV, VDE, CE
15
Re l ays - Ge n e r a l P u r po s e
Ge n e r a l P u r po s e
G2R-S (S)
G7J
G7L
Dimensions mm (in) 35.5 H x 29 L x 13 W
64 H x 53.5 L x 34.5 W
(2.52 x 2.11 x 1.36)
49.02 H x 68.58 L x 34.54 W
(1.93 x 2.70 x 1.36)
(1.40 x 1.14 x .51)
Switching 1 pole: 10 A max.
25 A max.
30 A max.
2 pole: 5 A max.
Features • Pb-free, Cd-free
• Nameplate and mechanical flag
indicator standard
• Ideal for 3 phase motor control
• 4 pole mini contactor
• DIN rail mountable
• Low cost, high power relay
• 3 mm contact gap
• Conforms to IEC 950/UL 1950
• Class B insulation standard
• LED diode, and lockable test
button available
Contact Ratings
Contact form 1 Form C
4 Form A, 3 Form A/1 Form B,
2 Form A/2 Form B
1 Form A-DM,
2 Form A-DM
2 Form C
Contact type Single button
Contact material Ag Alloy
Single button
Ag Alloy
Single button
Ag Alloy
Max. operating current 1 pole: 10 A
under resistive load 2 pole: 5 A
25 A (NO contacts),
8 A (NC contacts)
30 A (SPST-NO),
25 A (DPST-NO)
Max. operating voltage 250 VAC, 30 VDC
250 VAC, 125 VDC
250 VAC
Max. switching capacity 1 pole: 2,500 VA, 300 W
under resistive load 2 pole: 1,250 VA, 150 W
5,500 VA (NO contacts),
1,760 VA (NC contacts)
1 pole : 6,600 VAC;
2 pole: 5,500 VAC
Minimum permissible load 100 mA, 5 VDC
Rated load 1 pole: 10 A @ 30 VDC
100 mA, 24 VDC
100 mA, 5VDC
25 A at 220 VAC (NO contacts);
8 A at 220 VAC (NC contacts)
1 pole: 30 A at 250 VAC;
2 pole: 25 A at 220 VAC
(under resistive load)
10 A @ 250 VAC
2 pole: 5 A @ 30VDC
5 A @ 250 VDC
Coil Ratings
Coil voltage 6, 12, 24, 48 VDC;
12, 24, 100/120, 200/240 VAC;
12, 24, 48, 100 VDC
12, 24, 100/120, 200/240 VAC;
12, 24, 48, 100 VDC
24, 120, 240 VAC
Power consumption 0.9 VA, 0.53 W
1.8 to 2.6 VA, 2.0 W
4,000 VAC
1.7 to 2.5 VA, 1.9 W
4,000 VAC
Dielectric strength 1 pole: 5,000 VAC (coil and contacts)
(50/60 Hz for 1 minute)
1,000 VAC (same polarity)
2 pole: 5,000 VAC (coil and contacts)
3,000 VAC (different polarity)
1,000 VAC (same polarity)
Electrical service life
(operations)
100,000 minimum
100,000 minimum
100,000 minimum
Terminal choices
Plug-in
Quick-connect, screw, PCB
R99-04 for G5F
Quick-connect, screw, PCB
Accessories
Sockets for track mounted sockets with
screw terminals and back connecting
sockets with solder and PCB terminals
Note: P2RF-S series screwless clamp
terminal socket available
R99-07G5D E bracket; P7LF-D adapter;
P7LF-06 front connecting socket
Approved standards
UL, CSA, VDE
UL, CSA, TUV, CE
UL, CSA, VDE, CE
16
Re l ays - Ge n e r a l P u r po s e
Ge n e r a l P u r po s e
MGN
MJN
Dimensions mm (in) Short Base: 55.88 H x 63.50 L x 63.50 W
(2.20 x 2.50 x 2.50)
48.38 H x 35.56 L x 38.73 W
(1.91 x 1.40 x 1.53)
Long Base: 60.45 H x 84.33 L x 63.50 W
(2.38 x 3.32 x 2.50)
Switching 30 A max.
30 A max.
Features • 30 Amp heavy duty power relay
• Class F coil insulation system for 155°C (311°F) total
temperature
• Rugged power driver offers superior 3/16” through-air and
3/8” over-surface spacing
• Interlocked frame and contact block prevent contact
misalignment during plug-in
• Open or dust covered available with indicator lamps
and push-to-operate buttons
• Coil molded in DuPont Rynite® for environmental protection
• Rugged construction rivets terminals to base
Contact Ratings
Contact form
–
1 Form C, 2 Form C, 3 Form C (non-latching);
1 Form C, 2 Form C (latching/unlatching)
Contact type Single button
Contact material 5/16” diameter Ag Alloy
Single button
3/16” diameter Ag Alloy
–
Max. operating current
–
under resistive load
Max. operating voltage
–
–
–
–
Max. switching capacity
under resistive load
Minimum permissible load
–
–
Rated load 30 A or 1-1/2 HP at 120 or 240 VAC;
(under resistive load) 2 HP at 240 VAC;
3,600 W at 120 or 240 VAC (ballast);
10 A at 28 VDC and 120/240 VAC at 80% pf;
1/3 HP at 120 VAC;
1/2 HP at 277/240/480/600 VAC 36 LRA-8.5FLA at 18 VDC; 3 A at
30 A at 240 VAC, 100,000 cycle (resistive), 20 A at 600 VAC; 480/600 VAC at 80% pf;
30 A at 28 VDC
10 A at 277 VAC resistive;
20 A at 28 VDC and 120/240/277 VAC;
10 A at 480/600 VAC; 3/4 HP at 120 VAC;
1-1/2 HP at 240 VAC, 17 FLA, 65 LRA, 300 VDC;
30 A at 28 VDC;
15 A at 480/600 VAC;
1 HP at 120 VAC; 1-1/2 at 240 VAC
Coil Ratings
Coil voltage
6, 12, 24, 120, 240, 480 VAC;
6, 12, 24, 48, 110 VDC
6, 12, 24, 120, 240 VAC;
5, 6, 24, 48, 110 VDC
Power consumption
9.5 VA nominal (AC); 2 W nominal (DC)
Latching/Non-latching AC 1.7 VA nominal (1, 2PDT); 2.0 VA
(3PDT) Non-latching DC 1.2 W nominal
Dielectric strength
(50/60 Hz for 1 minute)
2200 VRMS, 60 Hz between contacts;
2200 VRMS, 60 Hz between other elements
Greater than 750 VAC, RMS 60 Hz across open contacts;
greater than 2500 VAC, RMS 60 Hz all other mutually
insulated elements
Electrical service life
(operations)
100,000 minimum
Screw type
100,000 minimum
Terminal choices
Accessories
Quick-connect
Dust Cover - sealed knock-out holes for standard conduit
fittings. Relay mounts on pre-drilled base.
Constructed of aluminum. Snap action cover release
127 W x 76.20 H x 101.60 D (5 x 3 x 4)
PTF11PC Socket; PTF11QDC Socket; PTF21PC Socket;
PTFPCB Socket; PYMJN-PCB Hold Down Springs;
PYMJN-S Hold Down Springs
Approved standards
UL recognized
UL, CSA
17
S o c ke t S e l e c t io n – Q u ic k Re f e r e n c e Ch a r t
Relay Type
Track Mount
Sockets
Back Connecting
Sockets
Solder terminals
PCB terminals
G2R-1-S
G2R-2-S
P2RF-05
P2RF-05-E
P2RF-05-S
P2R-05A
P2R-05P
P2RF-08
P2R-08A
P2R-08P
P2RF-08-E
P2RF-08-S
G6B-1
G6B-2
G6BK
G6BU
–
–
P6B-04P
P6B-26P
P6B-06P
P6B-04P
P6C-06P
P6C-08P
P6C-06P
PT08-0
–
–
–
–
–
–
G6C-1, G6C-2
G6CK
G6CU
LY1, LY2
LY3
–
–
–
–
–
–
PTF08A-E
PTF11A
PTF14A-E
PFO83A-E
PF113A-E
PT08
PT11
PT14
PL08
PL11
PY08
PT11-0
LY4
PT14-0
MK2
PLR08-0
PLE11-0
PY08-02
MK3
MY2
PYF08A-E
PYF08A-N
PYF08-S
MY3
MY4
PYF11A
PY11
PY14
PY11-02
PY14-02
PYF14A-E
PYF14A-N
PYF14S
MY2K
PYF14A-E
PY14
–
PY14-02
–
MY4(Z)H
PYF14A-E
NOTES:
1. -E and -N models are finger-protect construction. Round terminals cannot be used. Use Y-shaped terminals.
2. -S types are screwless terminal styles.
Relay Type
Bracket
Mounting
Adaptor
Front Connecting
Socket
Track Mount/
Panel Mount
Track Mount/
Panel Mount
G7J-(ALL)
G7L-1A-T
G7L-1A-TJ
G7L-1A-B
G7L-1A-BJ
G7L-2A-T
G7L-2A-TJ
G7L-2A-B
G7L-2A-BJ
R99-04-FOR-G5F
R99-07G5D
–
–
P7LF-D
P7LF-06
P7LF-06
–
–
P7LF-06
P7LF-06
–
–
Mounting Track
Length
PFP-100N
PFP-50N
1 meter
.5 meter
18
Re l ays - S o l id S t at e
S o l id S t at e
G3MB
G3MC
G3R I/ O
G3M
G3TB
Dimensions mm (in) 20.5 H x 24.5 L x 5.5 W 13.5 H x 24.5 L x 4.5 W Input & Output modules: 20 H x 40 L x 9 W
Input module:
(0.81 x 0.96 x 0.22)
(0.53 x 0.96 x 0.18)
28 H x 29 L x 13 W
(1.10 x 1.14 x 0.51)
(0.79 x 1.58 x 0.35)
20.5 H x 43.5 L x 10 W
(0.81 x 1.70 x 0.39)
Output module:
30.5 H x 43.5 L x 10 W
(1.20 x 1.70 x 0.39)
Max. switching 2 A
2 A
Input module: 100 mA;
Output module: 2A
3 A
Input module: 25 mA;
Output module: 3 A
Features • Space-saving SIP
design
• Thin profile
• Ideal for close
PCB mounting
• 4 kV insulation
• Operation indicator
standard
• Interchangeable with
G2R electromechanical
relay
• Multi-input SSR
• Space-saving SIP
design
• Ideal for high density
Power PCB applications
• Color-coded modules
• Industry standard
footprint
• Industry standard
footprint
• Ideal for high density
PCB applications
• 4 kV dielectric strength
• Ideal for DIN rail
mount I/O operations
Operating input 5, 12, 24 VDC
Output voltage 75-264 VAC
5, 12, 24 VDC
75-264 VAC
Input module: 5 VDC;
6.6-32 VDC; 60-264 VAC;
Output module: 4-32
VDC
5, 12, 24 VDC
Input module:
80-264 VAC, 3-32 VDC;
Output module: 3-32
VDC
Input module: 4-32 VDC; 75-264 VAC
Output module:
Input module: 4-32 VDC;
Output module:
75-264 VAC, 4-200 VDC
75-264 VAC, 4-200 VDC
Isolation Phototriac
Dielectric 2,500 VAC
Zero crossing Yes
Phototriac
2,500 VAC
Yes
Photocoupler, Phototriac Phototriac
Photocoupler
4,000 VAC
4,000 VAC
2,500 VAC
Yes
Input module: No;
Output module: Yes
Input module: No;
Output module: Yes
Snubber circuit Yes
Yes
Input module: No;
Output module: Yes
Yes
Input module: No;
Output module: Yes
Life (MTTF) 100,000 hours
Mounting PCB
100,000 hours
PCB
100,000 hours
Socket
100,000 hours
PCB
100,000 hours
PCB
Terminal PCB
PCB
Plug-in
PCB
PCB
Approvals UL, CSA, TUV
UL, CSA
N/A
UL, CSA, TUV
G2R
UL, CSA, TUV
N/A
UL, CSA
N/A
Equivalent Omron N/A
EMR footprint
Optional heat sink N/A
Socket N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
P2RF-05E
19
Re l ays - S o l id S t at e
S o l id S t at e
G3TC
G3NE
G3NA
G3PB
Dimensions mm (in) 31.8 H x 43.2 L x 15.2 W
11.5 H x 47 L x 37.5 W
(0.45 x 1.90 x 1.50)
27 H x 58 L x 43 W
(1.06 x 2.28 x 1.69)
Consult Omron for specific
model
(1.25 x 1.7 x 0.6)
Switching Input Module: 12 mA, 15 mA, or 20 A max.
18 mA (depending on model)
Output Module: 3 A (1 A on DC
output models rated up to 200
VDC)
50 A max.
45 A max.
Features • Color-coded modules
• Industry standard footprint
• Built-in hold down screw
• Optical isolation –
• High capacity
• Panel mount
• Quick-connect terminals
• Ideal for industrial controls
• Hockey puck design
• Operation indicator
standard
• Available with or
without built-in heat sink
• 3-phase or single
phase models
Dielectric strength of 4 kV
• Zero cross on AC output
modules
• DIN rail mountable
Operating input Input Module: 90-140 VDC/AC, 5, 12, 24 VDC
4-32 VDC; 75-264 VAC
19-528 VAC; 5-200 VDC
Phototriac, Photocoupler
10 mA max
12-24 VDC
Phototriac
180-280 VDC/AC, 10-32 VDC/AC
(depending on model)
Output Module:
5-24 VDC (depending
on model)
Output voltage Input Module: 4.5-6 VDC, 12-18 75-264 VAC
VDC, 20-30 VDC (depending on
model)
Output Module: 75-140 VAC,
75-280 VAC, 5-60 VDC, 5-200
VDC (Depending on model)
Isolation AC Input, DC Input, DC Output: Phototriac
Photocoupler
AC Output: Phototriac
Dielectric 4,000 VAC
2,000 VAC
Yes
2,500 VAC
Yes
2,500 VAC, 50/60 Hz
Yes
Zero crossing Yes (AC output
modules only)
Snubber circuit Yes (AC output
Yes
Yes
Yes
modules only)
Life (MTTF) 100,000 hours
Mounting PCB
100,000 hours
Plug-in
100,000 hours
Panel
100,000 hours
DIN rail
Terminal PCB
Quick connect
UL, CSA, TUV
N/A
Screw
Screw
Approvals UL, CSA, TUV, CE
UL, CSA, TUV
N/A
UL, UL508, CSA, CE
N/A
Equivalent Omron N/A
EMR footprint
Optional heat sink N/A
Socket N/A
Y92B-N50, -N100
N/A
Y92B-A100, -A150N, -A250
N/A
Y92B-P50 (depending on model)
N/A
20
SWITCHES
For consistent switching perform ance
under all conditions, including excessive
dust and hum idity, trust an Om ron
switch. Our broad switch product line
includes snap action, DIP, thum bwheels
and tactile. All are available with a wide
variety of actuators, m ounting styles,
and switching capacities. The following
pages list the m ost popular m odels in
each of our switch fam ilies. To browse
the entire switch product line visit our
website at www.omron.com/oei.
S wit c h e s - Un s e a l e d S n a p Ac t io n
Un s e a l e d S n a p Ac t io n
(D2F-01,
D2F, D2F-F)
(SS-01, SS-5,
SS-10)
(V-15G, V-10G)
D2F
SS-P/ SS
V
Dimensions mm (in) 6.5 H x 5.8 D x 12.8 W
10.2 H x 6.4 D x 19.8 W
(0.40 x 0.25 x 0.78)
15.9 H x 10.3 D x 27.8 W
(0.63 x 0.41 x 1.09)
(0.26 x 0.23 x 0.50)
Features • Subminiature Snap Action Switch
• Switches microvoltage / microcurrent
loads
• Subminiature Snap Action Switch
• SS-01: Switches microcurrent/
microvoltage load with crossbar contacts
• SS-3: Single-leaf moveable spring
• SS-5: Split double spring mechanism for • Internal lever options
a long life of up to 30 million operations
• SS-10: Split double spring mechanism for
a long life of up to 10 million operations
• Internal lever options
• Miniature Snap Action Switch
• Industry standard design with
15 A (V-15G) or 10 A (V-10G) rating
• Cadmium-free contacts
• Long lifespan assured by high-precision
dual spring reverse-action mechanism
Contact Ratings
Resistive load 0.1 A, 30 VDC (D2F-01)
3 A, 125 VAC (D2F)
0.1 A, 125 VAC (SS-01)
3 A 125 VAC (SS-3)
15 A, 250 VAC (V-15G)
10 A, 250 VAC (V-10G)
1 A, 125 VAC (D2F-F)
5 A, 125 VAC (SS-5)
10.1 A, 125/250 VAC (SS-10)
Contact form SPDT
SPDT (SPST-NC, SPST-NO per request)
SPDT, SPST-NC, SPST-NO
Operating force (OF)* 75 g (D2F-01)
150 g (D2F)
25 g, 50 g, or 150 g (SS-01)
150 g (SS-3)
100 g, 200 g, or 400 g (V-15G)
100 g or 200 g (V-10G)
75 g (D2F-F)
50 g or 150 g (SS-5)
150 g (SS-10)
Mechanical service life 1,000,000 operations min.
Electrical service life 30,000 operations min. (OT: full stroke)
Mounting pitch mm (in) 6.5 (0.26)
30,000,000 ops. min. (SS-01, SS-5)*
1,000,000 ops. min. (SS-01P, SS-3)
10,000,000 ops. min. (SS-10)*
50,000,000 operations min.
200,000 operations min. (SS-01, SS-5)** 100,000 operations min. (V-15G)
70,000 operations min. (SS-3)
50,000 operations min. (SS-10)**
300,000 operations min. (V-10G)
9.5 (0.37)
10.3 x 22.2 (0.41 x 0.87)
Actuator types Pin plunger, Hinge lever, Simulated roller
Pin plunger, Hinge lever, Simulated roller
lever, Formed hinge lever, Hinge roller
lever
Pin plunger, Short hinge lever, Hinge lever,
Long hinge lever, Simulated roller lever,
Short hinge roller lever, Hinge roller lever
lever, Roller lever
Terminal choices PCB (straight, self-supporting, right and
SS-01, SS-3, SS-5: PCB (straight, parallel Solder/Quick connect (#187)
left angle), Solder
left, parallel right), Solder, Quick connect
SS-10: PCB (straight), Solder,
Quick connect (#110)
Quick connect (#187),
Quick connect (#250), Short solder,
Screw
Approved standards UL, CSA
UL, CSA, VDE, SEMKO, SEV
UL, CSA, SEV, VDE, SEMKO, DENMARK
*Values are for pin plunger
*at rated OT value
**at rated load
type only
22
S wit c h e s - Un s e a l e d S n a p Ac t io n
Un s e a l e d S n a p Ac t io n
D3V
D3D
A
Z-15G
Dimensions mm (in) 15.9 H x 10.3 D x 27.8 W
30.7 H x 15 D x 36.4 W
(1.21 x 0.59 x 1.43)
24.2 H x 17.45 D x 49.2 W
(0.95 x 0.69 x 1.93)
24.2 H x 17.45 D x 49.2 W
(0.95 x 0.69 x 1.93)
(0.63 x 0.41 x 1.09)
Features • Miniature Snap Action Switch • Miniature Door Switch
• General Purpose Snap Action • General Purpose Snap Action
• Environmentally friendly: free • Low-noise
Switch
Switch
of beryllium copper and lead
• Maximum operating
temperature of 105°C
• Internally or externally fitted
levers
• Disconnectable crimp
connector
• Gold crossbar contacts
• High capacity switch handles
loads with large inrush
currents
• High precision 15 A switch
available in a variety of styles
Contact Ratings
Resistive load 21/16/11/6 A, 125/250 VAC
1 A 125 VAC or 0.5 A 250 VAC 20 A, 250 VAC
15 A, 125/250 VAC*
0.1 A, 125 VAC
Contact form SPDT, SPST-NC, SPST-NO
Operating force (OF)* 50 g, 100 g, or 200 g
SPDT, SPST-NC, SPST-NO
204 g
SPDT
SPDT
400 g to 625 g
250 to 350 g
Mechanical service life 10,000,000 operations min.
300,000 operations min.
1,000,000 ops.min.
(at rated OT load)
Refer to "SPECIFICATIONS"
section of data sheet for
detailed service life information
Electrical service life 100,000 operations min.
200,000 operations min.
500,000 ops. min.
(at rated OT load)
Refer to "SPECIFICATIONS"
section of data sheet for
(D3V-16)
200,000 operations min.
(D3V-11)
detailed service life information
500,000 operations min.
(D3V-6/0.1)
Mounting pitch mm (in)
–
Panel-mount
25.4 (1.0)
25.4 (1)
Actuator types Pin plunger, Short hinge lever,
Hinge lever, Long hinge lever,
Simulated roller lever, Short
hinge roller lever, Hinge roller
lever
Pin plunger, lever
Pin plunger, Short spring
plunger, Panel mount plunger,
Panel mount roller plunger,
Pin plunger, Slim spring
plunger, Short spring plunger,
Panel mount plunger, Panel
Panel mount cross roller, Short mount roller plunger, Panel
hinge lever, Hinge lever, Short
hinge roller lever, Hinge roller
lever
mount cross roller plunger,
Hinge lever, Low force hinge
lever, Short hinge roller lever,
Hinge roller lever, Unidirectional
short hinge roller lever, Spring
plunger, Flexible rod
Terminal choices Solder/Quick connect (#187)
Quick connect (#187)
Connector
UL, CSA
Solder, Screw, or Quick
connect (#250)
Solder, Screw
Quick connect (#250)
Approved standards UL, CSA, VDE, SEMKO
UL, CSA, SEV
UL, CSA, SEV
*Values are for pin plunger
*NOTE: For 10A, 125 VDC, “X”
Series Magnetic Blow-out type
for DC circuits, consult Omron.
type only
23
S wit c h e s - S e a l e d S n a p Ac t io n
S e a l e d S n a p Ac t io n
D2FW-G
D2HW
D2SW
D2VW
Dimensions mm (in) 13.5 H x 8.0 D x 23.5 W
7 H x 5.3 D x 13.3/18.5 W
(0.28 x 0.21 x 0.52/0.73)
10.1 H x 6.4 D x 19.8 W
(0.40 x 0.25 x 0.78)
15.9 H x 10.3 D x 33 W
(0.63 x 0.41 x 1.29)
(0.53 x 0.31 x 0.93)
Features • Subminiature Snap Action Switch • Subminiature Snap Action Switch • Subminiature Snap Action Switch • Miniature Snap Action Switch
• Small sealed switch with
lead wires
• Conforms to IP67
• Small sealed switch with long • Small sealed switch conforms • Sealed water-tight switch
stroke for reliable ON/OFF
action
to IP67 and IP68 (lead wire
type) and IP50 (terminal type)
conforms to IP67 and IP68
(lead wire type) and IP50
(terminal type)
• Conforms to IP67 (lead wire
type) and IP50 (terminal type)
Contact Rating
Resistive load 0.5 A, 30 VDC or 50 mA,
2A, 12 VDC/ 1A, 24 VDC/ 0.5A, 0.1 A, 125 VAC or 3 A,
0.1 A, 125 VAC or 5 A,
125/250 VAC
30 VDC
42 VDC
125 VAC
Contact form SPDT, SPST-NC, SPST-NO
SPDT, SPST-NC, SPST-NO
SPDT (SPST-NC, SPST-NO
per request)
SPDT (SPST-NC, SPST-NO
per request)
Operating force (OF)* 120 g
76 g
180 g
200 g
Mechanical service life 300,000 operations min.
1,000,000 operations min.
5,000,000 operations min.
10,000,000 operations min.
Electrical service life 100,000 operations min.
100,000 operations min.
200,000 operations min.
(0.1 or 3 A, 125 VAC)
100,000 operations min.
(2A, 250 VAC)
1,000,000 operations min.
(0.1 A, 125 VAC)
100,000 operations min.
(3 A, 125/250 VAC)
Mounting pitch mm (in) 16 (0.63)
8 (0.32) posts, 13 (0.51 ) screw 9.5 (0.37)
10.3 x 22.2 (0.41 x 0.87)
Actuator types Leaf lever, Long leaf lever
Pin plunger, Hinge lever, Long
hinge lever, Simulated roller
lever, Leaf lever, Simulated leaf roller lever
lever, Long leaf lever
Pin plunger, Hinge lever,
Simulated roller lever, Hinge
Pin plunger, Short hinge lever,
Hinge lever, Long hinge lever,
Simulated roller lever, Short
hinge roller lever, Hinge roller
lever
Terminal choices Lead wires
PCB (straight, angled), Solder,
Lead wire (bottom, right side,
left side)
Solder, Quick connect (#110),
PCB, Lead wires
Solder/Quick connect
(#187 tab terminals)
Lead wires
Approved standards
–
–
UL, CSA
UL, CSA (refer to "Ratings"
section of data sheet)
*Values are for pin plunger
24
S wit c h e s - Ta c t il e
Ta c t il e
B3F
B3FS
B3SN
Dimensions mm (in) Varies by type
Varies by type
3.1 H x 6.5 D x 7.0 W
(0.12 x 0.26 x 0.28)
Features • Tactile 6 mm/12 mm
Square Switch
• Tape & Reel Surface
Mount Switches
• Surface Mount Tactile Switch
• Low profile sealed
construction for dust or
humid environments
• Available in bulk or tape
packaging
• Space saving switch with
extended mechanical/electrical
service life
• Taped radial packaging
available*
• Tactile switch that
incorporates a snap action
contact mechanism which
ensures sharp switching
operations
Contact form SPST-NO
SPST-NO
SPST-NO
Switching capacity 50 mA 24 VDC (resistive load)
Action Momentary
50 mA, 24 VDC (resistive load)
1 to 30 mA, 5 to 24 VDC (resistive load)
Momentary
Momentary
None
Ground terminal Models available with or without ground
Models available with or without ground
terminal
terminal
Immersion cleaning No immersion cleaning after soldering
No immersion cleaning after soldering
None
Immersion cleaning after soldering
None
Keycap (optional) Refer to "ACCESSORIES" section of data
sheet for Keycap information
Operating force (OF) Refer to "OPERATING CHARACTERISTICS" 100 gf (General purpose)
160 ±50 g max.
section of data sheet
150 gf (High force)
Service life
1,000,000 ops. min.
(General purpose)
300,000 operations min.
(High force)
50,000 operations min.
B3F-1ꢀꢀꢀ/3ꢀꢀꢀ:
(Mechanical/Electrical) 1,000,000 ops. min.
(High force: 300,000 ops. min.)
B3F-4ꢀꢀꢀ:
3,000,000 ops. min.
(High force: 300,000 ops. min.)
B3F-5ꢀꢀꢀ:
10,000,000 ops. min.
B3F-6ꢀꢀꢀ:
1,000,000 ops. min.
(High force: 300,000 ops. min.)
Actuator type Plunger
Terminal choices PCB
*NOTE: For immersion cleaning type B3W
Plunger
Plunger
Surface mount
Surface mount
consult Omron.
IMPORTANT NOTE: None of the Tactile switch models listed within this catalog are water-washable.
25
S wit c h e s - Dip
DIP
A6A
A6C
A6R/ A6RV
A6E/ A6ER
A6H
A6T/ A6S
Dimensions mm (in) Varies by type
Varies by type
Varies by type
Varies by type
Varies by type
Varies by type
Features • Subminiature
• Subminiature
• Economical rotary • Available in a
• Half-pitch Surface • Straight PCB/
Rotary DIP Switch
• Small housing for • Internal sealed
high-density
mounting and
sealed construction need for tape
for immersion
cleaning
Rotary DIP Switch
DIP switch
variety of model
types:
A6E: Flat/Raised
actuator
A6ER: Side
actuator
Mount DIP Switch
• Low profile of
1.55 mm
• Seal tape models
available
Surface Mount DIP
Switch
• Top, side and
extended shaft
models
• O-ring sealed
construction to
prevent ingress of
dust and dirt
construction
eliminates the
• Flat actuated types
with or without
seal tape, and tape
seal versions in
embossed tape
packaging
sealing, and
automatic, high-
density mounting
is possible
• Raised actuator
types also available
Contact Rating
Resistive load 1 to 100 mA,
100 mA at 30 VDC
25 mA at 24 VDC
25 mA at 24 VDC
–
25 mA at 24 VDC
–
25 mA at 24 VDC
–
5 to 28 VDC
Switching positions 10-BCD
16-Hexadecimal
10-BCD
16-Hexidecimal
10-BCD
16-Hexidecimal
Number of poles
–
–
–
2, 3, 4, 5, 6, 7, 8, 9, 10 4, 8
A6T: 1, 2, 4, 6, 8, 10
A6S: 2, 3, 4, 5, 6, 7,
8, 9, 10
A6S (embossed
tape): 4, 6, 8
Operating force (OF) 120 to 250 g-cm
15 to 100 g-cm
200 g-cm max.
30 gf
30 gf
30 gf
Mechanical service life 10,000 detent ops.
10,000 operations
min.
5000 detent
operations min.
1,000 operations
min.
1,000 operations
min.
1,000 operations
min.
min.
Electrical service life 2,000 detent ops.
2,000 operations
min.
5000 detent
operations min.
1,000 operations
min.
1,000 operations
min.
1,000 operations
min.
min.
Actuator types Rotary
Rotary
Rotary
Top, raised, side
PCB terminal
Top
Top, raised
Terminal choices PCB terminal
PCB terminal
PCB terminal
Surface mount
PCB terminal;
Surface mount
Immersion cleaning Immersion cleaning Immersion cleaning No immersion
No Immersion
cleaning after
soldering;
No immersion
cleaning after
soldering
No immersion
cleaning after
soldering
after soldering
after soldering
cleaning after
soldering;
Absolutely
Absolutely
non-washable
non-washable
IMPORTANT NOTE: None of the DIP switch models listed within this catalog are water-washable.
26
S wit c h e s - Th u mbwh e e l
Th u mbwh e e l
S pe c ia l P u r po s e
A7CN
A7D
A8L
Dimensions mm (in) 18 H x 6 W x 15.5 D
16 H x 5.08 W x 17.5 D
(0.63 x 0.20 x 0.69)
Dimensions mm (in) 16.5 H x 12.5 D x 19 W
(0.71 x 0.24 x 0.61)
(0.65 x 0.49 x 0.75)
Features • Designed specially for
printed circuit
• Economical thumbwheel
switch for use in DC
circuits
Features • Miniature Rocker Switch
• Withstands inrush currents
up to 100 A
• Ideal for built-in use
in small devices
• Space saving
• Contact gap of 3 mm minimum
• Can be fabricated with
stopper
Contact Ratings
Resistive load 10 A, 125 VAC or 250 VAC
Contact form SPST, DPST
Configuration Pushwheel
Pushwheel
Mounting Snap in (front mounting); Snap in (front mounting);
Screw mounted (back
mounting)
Screw mounted (back
mounting)
Operating force (OF) SPST: 220 ±120 gf
DPST: 400 ±250 gf
Terminal types PCB terminal
PCB terminal
Mechanical service life 50,000 operations min.
Electrical service life 10,000 operations min.
Actuator type Rocker
Dustproofing Provided
Color Black, light gray
Provided
Black, light gray
Terminal choices Quick connect/Solder, PCB (straight,
right angled, left angled)
Switching capacity 1 mA to 0.1 A,
50 VAC/28 VDC
1 mA to 0.1 A, 5 to
30 VDC (resistive load)
Approved standards UL, cUL
(resistive load)
Switching positions/ 10 (binary)
10 (binary)
Output code
Mechanical service life 30,000 ops. (steps) min. 30,000 ops. (steps) min.
Electrical service life 20,000 ops. (steps) min. 20,000 ops. (steps) min.
Spacers
A7C-2Pꢀ-1; A7C-1Pꢀ-1 A7D-2Pꢀ-1; A7D-1Pꢀ-1
27
PHOTOMICROSENSORS
Om ron has an optical switch that is
suitable for your m ost challenging
application, whether it calls for a
m icrophotonic or non-am plified
photom icrosensor. Choose am ong
different slot widths, sensing distances,
configurations, m ounting styles, etc. Our
product fam ilies and their vital
characteristics are listed in the following
pages. For m ore detailed descriptions of
our photom icrosensors visit our website
at www.omron.com/oei.
P h o t o mic r o s e n s o r s - P h o t o t r a n s is t o r s
P h o t o IC
Re f l e c t ive
Non-Amplified Non-Amplified
Non-Amplified Non-Amplified
Sub-category Slotted Photo IC with
Slotted Photo IC
Sub-category Reflective PCB mount
Reflective solder
connector
phototransistor
terminal phototransistor
Models EE-SX4235A-P2
EE-SX398, EE-SX3070,
EE-SX3081, EE-SX3088,
EE-SX498, EE-SX4070,
EE-SX4081, EE-SX4088
Model numbers EE-SY169, EE-SY169A,
EE-SY169B, EE-SB5-B,
EE-SF5-B
EE-SB5, EE-SF5
Solder terminals
Connection type PCB mount
Connection type Connector*
PCB mount
Features • Ideal for office automation • Sensor housing
Features • Unique snap-in
mounting mechanism
eliminates screws and
nuts
• Built-in Schmitt trigger
circuit
• Directly compatible
with TTL and CMOS
and computer peripheral
equipment
• Infrared LED and
photo-transistor assure
long life
reduces external light’s
influence
• High resolution
sensing
• Compatible with 1.0,
1.2, and 1.6 mm PCBs
Sensing distance mm(in) 5 (0.2)
Max. forward current (mA) 50 mA
5 (0.2)
50 mA
Slot width mm (in) 5 (0.2)
Output logic Light-ON
3 to 8 (0.12 to 0.315)
Light-ON or Dark-ON
50 mA
(40 mA: EE-SY169,
EE-SY169B)
Max. forward current mA
–
Supply voltage (VDC) 5 to 30 V
5 to 30 V
Supply voltage (VDC) 7 VDC
4.5 to 16 VDC
–40° to 75°C
0.4 V max.
Light current (mA) EE-SY169(A)(B):
160 µA to 2000 µA;
200 µA to 2000 µA
Operating temperature –25° to 75°C
Output low voltage (V) 0.35 V max.
EE-SB5/EE-SF5-B:
200 µA to 2000 µA
Output high voltage (V) (V x 0.9) V min.
15 V min.
CC
Response frequency (Hz) 15 kHz
15 kHz
Response frequency (Hz) 3,000 Hz
3,000 Hz
Ambient operating 0° to 70°C
-25° to 85°C
temperature (°C)
Output permissible 250 mW
250 mW
dissipation (mW)
Forward voltage (V)
Hysteresis
–
–
–
–
1.2 V – typ.
15%
Rising time (low to high)
Falling time (high to low)
3 µS – typ.
20 µS – typ.
10 mA max.
Current consumption (mA) 30 mA max.
*Applicable Mating
Connector
AMP 175778-3
AMP 173977-3
NOTE: The above specifications do not apply to all models listed.
For specific model information, visit www.omron.com/oei or contact your Omron representative.
30
P h o t o mic r o s e n s o r s - P h o t o IC & Re f l e c t ive
P h o t o t r a n s is t o r s
Non-Amplified
Non-Amplified
Non-Amplified
Non-Amplified
Sub-category Slotted phototransistor with
Miniature PCB mount
transmissive
Slotted surface mount
phototransistor output
Slotted actuator adaptable
phototransistor output
connector
Models EE-SX1235A-P2
EE-SX198, EE-SX1018,
EE-SX1035, EE-SX1041,
EE-SX1042, EE-SX1046,
EE-SX1055, EE-SX1070,
EE-SX1071, EE-SX1081,
EE-SX1088, EE-SX1096,
EE-SX1103, EE-SX1105,
EE-SX1106
EE-SX1107, EE-SX1108,
EE-SX1109, EE-SX1131
(dual channel)
EE-SA107-P2
Connection type Connector*
PCB mount
Surface mount
Connector*
Features • Electrical connections
using AMP connector
• Compact and
• Infrared LED and
phototransistor for
long life
• Narrow aperture slit for
high resolution sensing
• Compact size
• Ultra-compact
• High resolution sensing
• Non-contact, noiseless
sensing
• High-resolution sensing with
phototransistor output
• Ideal for restricted space
applications
high-resolution
Slot width mm(in) 5 (0.2)
Max. forward current (mA) 50 mA
Max. collector dissipation (mW) 100 mW
Operating temperature (°C) –25° to 95°C
Forward voltage (V) 1.2 V – typ.
2 to 8 (0.08 to 0.32)
50 mA
1 to 3 (0.04 to 0.12)
25 mA
3.6 (0.14)
50 mA
100 mW
75 mW
100 mW
–25° to 85°C
1.2 to 1.3 V
0.03 to 14 mA max.
0.4 V max.
–30° to 85°C
1.1 V – typ.
0.05 to 0.50 mA
0.1 V – typ.
–25° to 85°C
1.2 V – typ.
0.5 to 14 mA
0.4 V max.
Light current (mA) 0.6 mA to 14mA max.
Collector-emitter 0.4 V max.
saturated voltage (V)
Rising time (low to high) 8 µS – typ.
4 µS – typ.
(10 µS – typ.: EE-SX1103,
EE-SX1105, EE-SX1106)
10 µS – typ.
10 µS – typ.
8 µS – typ.
8 µS – typ.
Falling time (high to low) 8 µS – typ.
4 µS – typ.
(10 µS – typ.: EE-SX1103,
EE-SX1105, EE-SX1106)
*Applicable Mating Connector
AMP 175778-3
*Applicable Mating Connector
AMP 175778-3
AMP 173977-3
AMP 173977-3
NOTE: The above specifications do not apply to all models listed.
For specific model information, visit www.omron.com/oei or contact your Omron representative.
31
MICRO SENSORS
Om ron’s advanced m icro sensing
products m eet today’s dem and for
com pact, portable design. These sensors
give your designs a greater ability to
sense m ore about their environm ent so
you can provide m ore functionality and
operational efficiency.
The D8M MEMS-based m icro pressure
sensor m easures very sm all changes in
gas pressure, for exam ple, to im prove
com bustion efficiency in furnaces. The
new D6B tilt sensor senses changes in
orientation (right/left; front/back). For
exam ple, it senses when a cam era is
tilted so the cam era can autom atically
change the orientation of the display.
Micro sensing solutions from Om ron
can m easure:
• pressure
• flow
• tilt
• shock/vibration
• other physical phenom ena
For m ore inform ation about Om ron
sensors visit our website at
www.omron.com/oei.
Mic r o S e n s o r s - P r e s s u r e , Fl o w, S h o c k/Vib r at io n & Til t
P r e s s u r e
D8M-A
30 H x 25.8 D x 30 W
(1.18 x 1.02 x 1.18)
D8M-D
Varies by type
D8M-R
30 H x 25.8 D x 30 W
(1.18 x 1.02 x 1.18)
Dimensions
mm (in)
• Solid state MEMS pressure
sensor with analog output
• Solid state MEMS pressure
sensor with pulse count output
• Solid state MEMS pressure
sensor with frequency output
Features
Applicable fluid
Pressure range
Output voltage
Air. Other gas/fluid, please inquire. Air. Other gas/fluid, please inquire. Air. Other gas/fluid, please inquire.
0 to 4.9 kPa
0 – 1.25 VDC
–
Varies by type (0 to 5.88 kPa)
–
0 – 196.13 Pa
–
Varies by model 45 – 450 kHz
(1 pulse/9.81 Pa)
80 – 300 kHz (1 kHz/9.81 Pa)
Output frequency
Supply voltage
2.2 ±0.1 VDC
2.5 mA max.
-30° to + 70°C
2.2 – 3.4 VDC
4.2 – 5.5 VDC
10 mA max.
Varies by model (25 – 40 mA)
Current consumption
Temperature range
Varies by model
(-30° to + 70°C)
-20° to +70°C
S h o c k/Vib r at io n
D7E-1, -2
D7E-3
Dimensions mm (in) 23.1 H x 23.6 D x 36.4 W
23.1 H x 23.6 D x 36.4 W
(0.91 x 0.93 x 1.43)
(0.91 x 0.93 x 1.43)
• Compact seismic detector
Features • Self-resetting
• Compact tilt sensor
• Responds to gradual tilting of 1 degree/sec
• Self-resetting
• Quick-connect terminals
• Quick-connect terminals
Acceleration range Varies by model (100 – 200 cm/s2)
–
Operating angle
–
50 – 80 degrees
25 degrees or more
Return angle (reset) 2.5 degrees minimum from horizontal
Contact capacity 0.1 mA at 5 VDC to 100 mA
0.1 mA at 5 VDC to 100 mA
at 30 VDC resistive load
at 30 VDC resistive load
Contact form SPST-NC
SPST-NC
Temperature range -25° to + 60°C
Service life 5000 operations min.
-25° to + 60°C
5000 operations min.
Til t
Fl o w
D6F
D6B
5.50 H x 3.75 D x 5.50 W
Dimensions mm (in) (0.22 x 0.15 x 0.22)
Dimensions mm (in) 15 H x 20 D x 66 W (0.60 x 0.79 x 2.60)
Features Detects –
• clogged air filters
• Micro tilt sensor for space-constrained
applications
• breath rate in respiratory equipment
• natural gas flow rate
• air in fuel cells
Features
Operating angle 45 – 75 degrees (output goes from high to low)
Return angle 50 – 20 degrees (output goes from low to high)
Operating voltage (Vdd) 2.7 – 3.3 VDC
• flow in ventilation systems
Applicable fluid Air/LNG (Natural Gas)
Flow Range 0 - 1 L/min Air
Output voltage
Low 0.5 VDC max.
High Vdd – 0.5 VDC min.
(Output Voltage = 1– 5VDC)
0 - 2 L/min Air
0 - 5 L/min LNG
12 to 24 VDC
-10° to 60°C
Supply voltage
Current consumption 20 µA max.; 10 µA typ (Vcc = 3 VDC)
Temperature range Surface mount
Temperature range
33
CONNECTORS
Om ron developed a new line of flexible
printed circuit (FPC) connectors to
im prove space savings in your design and
increase productive yield in product
assem bly. Om ron’s FPC connector
designs have unique and reliable locking
m echanism s and close tolerances for
surface m ounting that provide
fabrication advantages over other
m anufacturers’ connector designs. While
a perfect choice for any FPC need, this
unique locking feature offers a clear
advantage in m obile and hand-held
applications. Om ron began supplying
connectors in 1984 throughout
S.E. Asia and now offers the latest in
technology to U.S. designers.
For m ore inform ation about Om ron
connectors visit our website at
www.omron.com/oei.
Co n n e c t o r s - Fl e xib l e P r in t e d Cir c u it
Fl e xib l e pr in t e d Cir c u it Co n n e c t o r s
XF2L
XF2H
XF2J
XF2G
Pitch mm 0.5 mm
Insertion type ZIF
0.5 mm
ZIF
0.5 mm
ZIF
0.5 mm
Non-ZIF
–
Cable lock type Slide Lock
PCB mounting SMT
Rotary Slide Lock
SMT
Slide Lock
SMT
SMT
Cable insertion Horizontal
Horizontal
Vertical
Vertical
Vertical
Vertical
Contact types Top & Bottom
Double Sided
Dimensions mm (in) 18.9 W x 3.5 D x 1.2 H
(0.74 x 0.14 x 0.05)
18.9 W x 3.05 D x 1.2 H
(0.74 x 0.12 x 0.05)
for 30 circuits
19.5 W x 3.4 D x 4.15 H
(0.77 x 0.13 x 0.16)
for 30 circuits
9.9 W x 3.4 D x 4.15 H
(0.39 x 0.13 x 0.16)
for 16 circuits
for 30 circuits
Available circuits 4, 5, 6, 7, 8, 10, 12, 13, 15, 18, 10, 12, 13, 14, 18, 20, 21, 22,
6, 8, 10, 12, 14, 16, 18, 20, 22, 6, 14, 16
24, 26, 28, 30
20, 21, 22, 26, 30
24, 26, 30, 32, 33, 34, 35, 36,
38, 40, 45, 50
Packaging Tape & reel
Tape & reel
Tape & reel
Tape & reel
Features Low profile, small size
Same connector for top and
bottom applications
Low profile, top entry
Low cost, top entry
Specifications
Rated current 0.5A
0.5A
0.5A
0.5A
Rated voltage 50 VDC
50 VDC
50 VDC
50 VDC
Contact resistance 30 mΩ max.
30 mΩ max.
100 M-Ω @ 250 VDC
30 mΩ max.
100 M-Ω @ 250 VDC
30 mΩ max.
100 M-Ω @ 250 VDC
Insulation resistance
Withstand voltage
100 M-Ω @ 250 VDC
250 VAC 1 min.
250 VAC 1 min.
250 VAC 1 min.
250 VAC 1 min.
(leakage current: 1 mA max.)
(leakage current: 1 mA max.)
(leakage current: 1 mA max.)
(leakage current: 1 mA max.)
Circuit insertion or
service life
20 times
20 times
20 times
20 times
Ambient operating
temperature (°C)
–30 to 85°C
–30 to 85°C
–30 to 85°C
–30 to 85°C
35
AUTHORIZED DISTRIBUTOR:
UNITED STATES, MEXICO,
and SOUTH AMERICA (excluding Brazil)
OMRON ELECTRONICS LLC
Schaumburg, IL
www.omron.com/oei
847.882.2288
CANADA SALES OFFICE
416.286.6465
OMRON CANADA, INC.
Toronto, Ontario
www.omron.ca
BRAZIL SALES OFFICE
55.11.5564.6488
Y0I-E-02 08/04/7.5M
© 2004 OMRON ELECTRONICS LLC
Printed in the U.S.A.
相关型号:
XF2H-1815-1LW-R100
Card Edge Connector, 18 Contact(s), 1 Row(s), Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Latch, Natural Insulator
OMRON
XF2H-1815-1LW-R500
Card Edge Connector, 18 Contact(s), 1 Row(s), Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Latch, Natural Insulator
OMRON
XF2H-2015-1LW-R100
Card Edge Connector, 20 Contact(s), 1 Row(s), Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Latch, Natural Insulator
OMRON
XF2H-2015-1LW-R500
Card Edge Connector, 20 Contact(s), 1 Row(s), Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Latch, Natural Insulator
OMRON
XF2H-2215-1LW-R100
Card Edge Connector, 22 Contact(s), 1 Row(s), Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Latch, Natural Insulator
OMRON
XF2H-2215-1LW-R500
Card Edge Connector, 22 Contact(s), 1 Row(s), Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Latch, Natural Insulator
OMRON
XF2H-2415-1LW-R100
Card Edge Connector, 24 Contact(s), 1 Row(s), Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Latch, Natural Insulator
OMRON
©2020 ICPDF网 联系我们和版权申明