G6W-1P-R [OMRON]
High-frequency Relay; 高频继电器型号: | G6W-1P-R |
厂家: | OMRON ELECTRONICS LLC |
描述: | High-frequency Relay |
文件: | 总8页 (文件大小:250K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
High-frequency Relay
G6W
Surface-mountable 2.5 GHz Band
Miniature SPDT High-frequency Relay
■ Superior high-frequency characteristics, such as
an isolation of 60 dB min., insertion loss of 0.2 dB
max., and V.S.W.R. of 1.2 max. at 2.5 GHz (50
Ω).
■ Surface-mounting terminals and superior high-
frequency characteristics combined through
adoption of tri-plate micro strip type transmission
lines.
■ Ultra-miniature at 20 × 9.4 × 8.9 mm (L × W × H).
■ Serialized relay lineup consisting of single-
winding latching type (200 mW), double-winding
latching type (360 mW), and reverse-arrangement
contact type.
■ Y-shape terminal arrangement that simplifies
wiring to PCBs.
Ordering Information
Classification
Single-side
stable
Single-winding
latching
Double-winding
latching
SPDT
Fully sealed
Through-hole
terminal
Y-shape terminal
G6W-1P
G6WU-1P
G6WK-1P
Surface-mounting Y-shape terminal
terminal
G6W-1F
G6WU-1F
G6WK-1F
Note: When ordering, add the rated coil voltage to the model number.
Example: G6W-1P 12 VDC
Rated coil voltage
Model Number Legend:
G6W--
1
2
3
4
5
1. Relay function
None: Single-side stable
3. Terminal shape
5. Classification
F:
P:
Surface-mounting terminals
PCB terminals
None: Standard contact arrangement
R: Reverse contact arrangement
U:
K:
Single-winding latching
Double-winding latching
4. Terminal Arrangement
2. Contact form
1: SPDT
None: Y-shape terminal arrangement
(standard)
Application Examples
Mobile phone base station (W-Cdma, UMTS, Cdma-2000, PCS), wireless LAN, and measurement devices.
G6W
G6W
Specifications
■ Contact Ratings
■ High-frequency Characteristics
Item
Load
Resistive load
10 mA at 30 VAC
Item
Frequency
2.0 GHz
65 dB min.
2.5 GHz
60 dB min.
Rated load
Isolation
10 mA at 30 VDC
2.5 GHz, 50 Ω, 10 W (See note.)
0.5 A
Insertion loss
V.SWR
0.2 dB max.
1.2 max.
Rated carry current
Max. carry power
Max. switching power
20 W (See note.)
10 W (See note.)
Max. switching voltage 30 VDC, 30 VAC
Max. switching current 0.5 A
Note: 1. The above values are initial values.
2. This values is for a load with V.SWR ≤ 1.2 at the imped-
ance of 50 Ω.
■ Coil Ratings
Single-side Stable Relays (G6W-1F, G6W-1P)
Rated voltage
3 VDC
66.7 mA
45 Ω
4.5 VDC
44.4 mA
101 Ω
9 VDC
22.2 mA
405 Ω
12 VDC
16.7 mA
720 Ω
24 VDC
8.3 mA
2,880 Ω
Rated current
Coil resistance
Must operate voltage
Must release voltage
Maximum voltage
Power consumption
80 ꢀ max. of rated voltage
10 ꢀ min. of rated voltage
150 ꢀ of rated voltage
Approx. 200 mW
Single-winding Latching Relays (G6WU-1F, G6WU-1P)
Rated voltage
9 VDC
22.2 mA
405 Ω
80 ꢀ max. of rated voltage
80 ꢀ max. of rated voltage
150 ꢀ of rated voltage
Approx. 200 mW
12 VDC
16.7 mA
720 Ω
Rated current
Coil resistance
Must set voltage
Must reset voltage
Maximum voltage
Power consumption
Double-winding Latching Relays (G6WK-1F, G6WK-1P)
Rated voltage
3 VDC
120 mA
25 Ω
80 ꢀ max. of rated voltage
80 ꢀ max. of rated voltage
150 ꢀ of rated voltage
Approx. 360 mW
4.5 VDC
80 mA
56 Ω
9 VDC
40 mA
225 Ω
12 VDC
30 mA
400 Ω
24 VDC
15 mA
Rated current
Coil resistance
Must set voltage
Must reset voltage
Maximum voltage
Power consumption
1,600 Ω
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of 10ꢀ.
2. The operating characteristics are measured at a coil temperature of 23°C.
3. The maximum voltage is the highest voltage that can be imposed on the Relay coil.
2
G6W
G6W
■ Characteristics
Classification
Model
Single-side Stable
G6W-1F, G6W-1P
Single-winding Latching
G6WU-1F, G6WU-1P
Double-winding Latching
G6WK-1F, G6WK-1P
Item
Contact resistance (See note 1.)
Operate (set) time (See note 2.)
Release (reset) time (See note 2.)
Minimum set/reset signal width
Insulation resistance (See note 3.)
Dielectric strength Coil and contacts
100 mΩ max.
10 ms max. (Approx. 3.5 ms) 10 ms max. (Approx. 2.5 ms)
10 ms max. (Approx. 2.5 ms)
——
12 ms
1,000 MΩ min. (at 500 VDC)
1,000 VAC, 50/60 Hz for 1 min
500 VAC, 50/60 Hz for 1 min
Coil and ground,
contacts and ground
Contacts of same
polarity
500 VAC, 50/60 Hz for 1 min
Vibration
Destruction
Malfunction
Destruction
10 to 55 Hz, 1.5-mm double amplitude
10 to 55 Hz, 2-mm double amplitude
resistance
2
Shock resistance
Endurance
1,000 m/s
2
Malfunction
500 m/s
Mechanical
Electrical
1,000,000 operations min. (at 36,000 operations/hour)
300,000 operations min. (with a rated load at 1,800 operations/hour)
Operating: −40ºC to 70ºC (with no icing or condensation)
Operating: 5ꢀ to 85ꢀ
Ambient temperature
Ambient humidity
Weight
Approx. 3 g
Note: 1. The contact resistance was measured with 10 mA at 1 VDC with a fall-of-potential method.
2. Values in parentheses are actual values.
3. The insulation resistance was measured with a 500-VDC Megger Tester applied to the same parts as those used for checking
the dielectric strength.
4. The above values are initial values.
Engineering Data
Ambient Temperature vs.
Maximum Voltage
Ambient Temperature vs.
Must Set or Must Reset Voltage
Shock Malfunction
Y
250
100
Max. estimated value
1,000
Energized
90
max.
avg.
max.
avg.
min.
min.
800
200
80
600
X
1,000
Z
Not
1,000
70
60
400
200
energized
150
100
50
40
30
20
200
400
600
800
1,000
Z'
1,000
X'
Shock direction
X
50
0
X'
Unit: m/s2
Sample: G6WK-1P 4.5VDC
Number of Relays: 10
Y
1,000
10
0
Must set voltage
Must reset voltage
Z
Y'
Z'
−40
−20
0
20
40
60
80 100
−60 −40 −20
0
20
40
60
80 100
Y'
Ambient temperature (˚C)
Ambient temperature (˚C)
Note: "Maximum voltage" is the maximum voltage that can
Conditions: Shock is applied in X, Y, and
Z
be applied to the Relay coil.
directions three times each with and without energizing
the Relays to check the number of contact
malfunctions.
3
G6W
G6W
Electrical Endurance
Electrical Endurance
(With Must Set and Must Reset
(With Must Set and Must Reset
Voltage)
Voltage)
100
100
80
80
Must set voltage
max.
Must set voltage
max.
max.
min.
min.
60
40
60
40
max.
min.
min.
Must reset voltage
Must reset voltage
Sample: G6WU-1P 4.5 VDC
Number of Relays: 5
Test conditions: 10-mA resistive load at
30-VDC with an operation rate of 50ꢀ.
Switching frequency: 1,800 operations/h
Sample: G6WU-1P 4.5 VDC
Number of Relays: 5
Test conditions: 10-mA resistive load at
30-VAC with an operation rate of 50ꢀ.
Switching frequency: 1,800 operations/h
20
0
20
0
0.001 0.01
0.1
1
10
100 1,000
0.001 0.01
0.1
1
10
100 1,000
Operating frequency (×103 operations)
Operating frequency (×103 operations)
Electrical Endurance
(Contact Resistance)
Electrical Endurance
(Contact Resistance)
1,000
1,000
Sample: G6WU-1P 4.5 VDC
Number of Relays: 5
Test conditions:
10-mA resistive load at 30-VDC
Switching frequency: 1,800 operations/h
Sample: G6WU-1P 4.5 VDC
Number of Relays: 5
Test conditions:
10-mA resistive load at 30-VAC
Switching frequency: 1,800 operations/h
NO contact
NC contact
NO contact
NC contact
500
300
500
300
100
100
50
30
50
30
Contact resistance
Contact resistance
max.
max.
max.
min.
min.
max.
min.
min.
10
10
0.001 0.01
0.1
1
10
100 1,000
0.001 0.01
0.1
1
10
100 1,000
Operating frequency (×103 operations)
Operating frequency (×103 operations)
External Magnetic Interference
(Average value)
(Average value)
(Average value)
N
+30
+30
+30
+20
Sample: G6WK-1P 4.5 VDC
Number of Relays: 5
Sample: G6WK-1P 4.5 VDC
Number of Relays: 5
Sample: G6WK-1P 4.5 VDC
Number of Relays: 5
S
N
S
N
S
+20
+20
+10
0
+10
0
+10
0
−10
−10
−10
−20
−30
−20
−30
−20
−30
Must set voltage
Must reset voltage
Must set voltage
Must reset voltage
Must set voltage
Must reset voltage
−1,200 −800
−400
0
400
800 1,200
−1,200 −800
−400
0
400
800 1,200
−1,200 −800
−400
0
400
800 1,200
External magnetic field (A/m)
External magnetic field (A/m)
External magnetic field (A/m)
4
G6W
G6W
High-frequency Characteristics
(Isolation)
High-frequency Characteristics
(Insertion Loss)
High-frequency Characteristics
(Return Loss)
(Average value)
(Average value)
(Average value)
20
0
0
10
40
60
80
0.1
0.2
0.3
20
30
40
100
120
0.4
0.5
50
60
0
500
1,000 1,500 2,000 2,500 3,000
Frequency (MHz)
0
500
1,000 1,500 2,000 2,500 3,000
Frequency (MHz)
0
500
1,000 1,500 2,000 2,500 3,000
Frequency (MHz)
Must Set and Must Reset Time
Distribution (See note.)
Must Set and Must Reset Bounce
Time Distribution (See note.)
20
30
Sample:
Sample:
G6WK-1P 4.5 VDC
Must set bounce time
Must set time
G6WK-1P 4.5 VDC
Number of Relays: 20
Number of Relays: 20
Must reset bounce time
Must reset time
25
20
15
10
5
15
10
5
0
0.5
1.0
1.5
2.0
2.5
3.0 3.5
0
0.5
1.0
1.5
2.0
2.5
3.0
Note: The tests were conducted at an ambient
temperature of 23ºC.
Time (ms)
Time (ms)
Dimensions
Note: All units are in millimeters unless otherwise indicated.
PCB Mounting Holes
(Top View)
Terminal Arrangement/
Internal Connections
(Top View)
G6W-1F
G6WU-1F
Tolerance: 0.1 mm
G6W-1F
2.54 2.54 2.54 2.54 5.08
Orientation mark
3.2
17
15 14 13
11
7
18
10
8
+
−
2.7 1.8
5.08 9.4
20
1
2
3
5
6
1.1
20
9.4
5.9
3
2.8
1.1
8.6
G6WU-1F
Orientation mark
Through-hole
20.4
9.2
17
15 14 13
11
7
18
10
8
S
R
+
−
Twelve, 0.6
15.24
Three,
0.4
0.2
0.2
−
+
5.08
11.6
22.2
20
1
2
3
5
6
Note: Each value has a tolerance of 0.3 mm.
5
G6W
G6W
PCB Mounting Holes
(Bottom View)
Terminal Arrangement/
Internal Connections
(Bottom View)
G6W-1P
G6WU-1P
Tolerance: 0.1 mm
G6W-1P
Orientation mark
2.54 2.54 2.54 2.54 2.54 2.54
1.6-dia.
0.8-dia.
0.8-dia.
1.6-dia.
1
2
3
5
6
7
20
8
2.7
1.8 5.08 7.62
+
−
18
10
Twelve, 1-dia.
17
15 14
13
11
20
9.4
Twelve, 1.8-dia.
3
5.9
8.6
19
Through-hole
G6WU-1P
Orientation mark
0.8-dia.
1.6-dia.
8.9
1
2
3
5
6
7
20
8
S
R
+
−
Twelve,
0.6
5.08
10.16
15.24
19
Three,
0.4
5.08
7.6
−
+
18
10
17
15 14
13
11
Tolerance: 0.3 mm unless specified.
PCB Mounting Holes
(Top View)
Terminal Arrangement/
Internal Connections
(Top View)
G6WK-1F
Tolerance: 0.1 mm
G6WK-1F
2.54 2.54 2.54 2.54 5.08
Orientation mark
3.2
17 16
1514
13
+
11
7
18
10
8
−
R
+
−
S
2.7 1.8
5.08
9.4
20
9.4
20
1
2
3
5
6
1.1
9.2
5.9
3
2.8
1.1
8.6
Through-
hole
20.4
Thirteen, 0.6
15.24
Three,
0.4
0.2
0.2
5.08
11.6
22.2
Tolerance: 0.3 mm unless specified.
PCB Mounting Holes
(Bottom View)
Terminal Arrangement/
Internal Connections
(Bottom View)
G6WK-1P
Tolerance: 0.1 mm
G6WK-1P
Orientation mark
2.54 2.54 2.54 2.54 2.54 2.54
1.6-dia.
0.8-dia.
0.8-dia.
1.6-dia.
1
2
3
5
6
7
20
8
+
−
S
2.7
1.8
5.08 7.62
20
9.4
+
−
R
18
10
Thirteen, 1-dia.
17 16
15 14
13
11
Thirteen, 1.8-dia.
8.9
3
5.9
8.6
19
Through-hole
0.8-dia.
1.6-dia.
Thirteen,
0.6
5.08
10.16
15.24
19
Three,
0.4
5.08
7.6
Tolerance: 0.3 mm unless specified.
6
G6W
G6W
Recommended Soldering Method
IRS Method (for Surface-mounting Terminal Relays)
• Temperatures indicate the surface temperatures of the PCB.
• The thickness of cream solder to be applied should be within a
range between 150 and 200 µm on OMRON's recommended
PCB pattern.
Correct Soldering
Incorrect Soldering
Relay
Excessive
amount of
solder
Insufficient
amount of
solder
Soldering
220 to
245
Terminal
Solder
PCB
Land
180 to
200
Visually check that the Relay is properly soldered.
Preheating
150
90 to 120
20 to 30
Time (s)
Precautions
For general precautions, refer to the PCB Relay Catalog (X033).
Familiarize yourself with the precautions and glossary before
using the G6W.
Through-hole substrate
1.5
0.5 0.5
0.4
1.8-dia.
Correct Use
4.5
Through-hole
High-frequency Characteristics Measurement Method and
Substrate to be Measured
High-frequency Characteristics for G6W are measured as shown
below.
1.8
1.5
20
R0.6
G6W-1
1.5
45˚
45˚
3
Vector network analyzer
(Manufacture:
Agilent Technologies)
0.5
R2.1
0.5
50- termination
resistances
Twenty seven,
0.6-dia.,
through-hole
HP8753D
3
8.6
30
Undersurface of relay
Convex position
7
G6W
G6W
SMD-type substrate
Handling
Leave the Relays packed until just prior to mounting them.
1.4
1.5
0.5
0.4
Soldering
Solder: JIS Z3282, H63A
Through-
hole
Soldering temperature: Approx. 250ºC (At 260ºC if the DWS
method is used.)
Soldering time: Approx. 5 s max. (approx. 2 s for the first time and
approx. 3 s for the second time if the DWS method is used.)
1.8 5.12
Be sure to adjust the level of the molten solder so that the solder
will not overflow onto the PCB.
6
Claw Securing Force During Automatic Insertion
1.5
0.5
During automatic insertion of Relays, make sure to set the
securing force of the claws to the following values so that the
Relay characteristics will be maintained.
3
3
Thirty one, 0.6-dia.,
through-hole
8.6
15.24
C
Undersurface of relay
B
A
Direction A: 4.90 N max.
Direction B: 9.80 N max.
Direction C: 9.80 N max.
Convex position
Secure the claws to the area indicated by shading.
Do not attach them to the center area or to only part of the
Relay.
Note: When higher isolation is required, connect the convex
position on the undersurface of the relay to the ground
pattern of the substrate by soldering.
Base plate for high-frequency characteristic compensation
Environmental Conditions During Operation, Storage, and
Transportation
Twenty four, 0.6-dia.,
13.6
through-hole
2
Protect the Relays from direct sunlight and keep the Relays under
normal temperature, humidity, and pressure.
Latching Relay Mounting
0.5
Make sure that the vibration or shock that is generated from other
devices, such as relays in operation, on the same panel and
imposed on the Latching Relay does not exceed the rated value,
otherwise the Latching Relay that has been set may be reset or
vice versa. The Latching Relay is reset before shipping. If
excessive vibration or shock is imposed, however, the Latching
Relay may be set accidentally. Be sure to apply a reset signal
before use.
1.5 15
Note: The above compensation plate is used to measure the
loss by the relay.
Coating
Relays mounted on PCBs may be coated or washed. Do not
apply silicone coating or detergent containing silicone, otherwise
the silicone coating or detergent may remain on the surface of the
Relays.
The relay loss is determined by subtracting the data
measured for a compensation base plate from those for a
high-frequency characteristics measuring substrate
mounted with a relay.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. K120-E1-01
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Electronic Components Company
Electronic & Mechanical Components Division H.Q.
Low Signal Relay Division
2-1, 2-Chome, Nishikusatsu, Kusatsu-City,
Shiga, 525-0035 Japan
Printed in Japan
Tel: (81)77-565-5481/Fax: (81)77-565-5581
0402-2M (0402) (B)
相关型号:
G6WK-1F-12VDC
RF Relay, SPDT, Latched, 0.03A (Coil), 12VDC (Coil), 360mW (Coil), 0.5A (Contact), 30VDC (Contact), 2500MHz, DC Input, AC/DC Output, Surface Mount-Straight
OMRON
G6WK-1F-24VDC
RF Relay, SPDT, Latched, 0.015A (Coil), 24VDC (Coil), 360mW (Coil), 0.5A (Contact), 30VDC (Contact), 2500MHz, DC Input, AC/DC Output, Surface Mount-Straight
OMRON
G6WK-1F-DC12
RF Relay, SPDT, Latched, 0.03A (Coil), 12VDC (Coil), 360mW (Coil), 0.5A (Contact), 30VDC (Contact), 5000MHz, 10W (RF Input), DC Input, AC/DC Output, Surface Mount-Straight, ROHS COMPLIANT
OMRON
G6WK-1F-DC24
RF Relay, SPDT, Latched, 0.015A (Coil), 24VDC (Coil), 360mW (Coil), 0.5A (Contact), 30VDC (Contact), 5000MHz, 10W (RF Input), DC Input, AC/DC Output, Surface Mount-Straight, ROHS COMPLIANT
OMRON
G6WK-1F-DC3
RF Relay, SPDT, Latched, 0.12A (Coil), 3VDC (Coil), 360mW (Coil), 0.5A (Contact), 30VDC (Contact), 5000MHz, 10W (RF Input), DC Input, AC/DC Output, Surface Mount-Straight, ROHS COMPLIANT
OMRON
G6WK-1F-DC4.5
RF Relay, SPDT, Latched, 0.08A (Coil), 4.5VDC (Coil), 360mW (Coil), 0.5A (Contact), 30VDC (Contact), 5000MHz, 10W (RF Input), DC Input, AC/DC Output, Surface Mount-Straight, ROHS COMPLIANT
OMRON
G6WK-1P-12VDC
RF Relay, SPDT, Latched, 0.03A (Coil), 12VDC (Coil), 360mW (Coil), 0.5A (Contact), 30VDC (Contact), 2500MHz, DC Input, AC/DC Output, Through Hole-Straight Mount
OMRON
G6WK-1P-DC12
RF Relay, SPDT, Latched, 0.03A (Coil), 12VDC (Coil), 360mW (Coil), 0.5A (Contact), 30VDC (Contact), 5000MHz, 10W (RF Input), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
OMRON
©2020 ICPDF网 联系我们和版权申明