G3NA-420B-TUV [OMRON]
Transistor Output SSR, 1-Channel, 2500V Isolation;
| 型号： | G3NA-420B-TUV |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | Transistor Output SSR, 1-Channel, 2500V Isolation 输出元件 光电 |
| 文件： | 总12页 (文件大小：1266K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Solid State Relay
G3NA
A Wide Range of Models with 5- to 40-A
Output Currents and Up to 480-VAC/
200-VDC Output Voltages
• All models feature the same compact dimensions to provide
a uniform mounting pitch. For a lower profile option, see
G5NE.
• Built-in varistor effectively absorbs external surges.
• Operation indicator (red LED) enables monitoring opera-
tion.
• Protective cover for greater safety.
• Ideal for commercial cooking, industrial/commercial heat-
ing, etc.
• Standard models certified by UL/CSA and -UTU models by
VDE (TÜV).
Ordering Information
.
Isolation
Zero cross
function
Indicator
Rated output load
(applicable output load)
Rated input voltage
Model
Phototriac
Yes
Yes
5 A at 24 to 240 VAC*
(19 to 264 VAC)
5 to 24 VDC
G3NA-205B
Photocoupler
100 to 120 VAC
200 to 240 VAC
5 to 24 VDC
Phototriac
10 A at 24 to 240 VAC*
(19 to 264 VAC)
G3NA-210B
Photocoupler
100 to 120 VAC
200 to 240 VAC
5 to 24 VDC
10 A at 200 to 480 VAC*
(180 to 528 VAC)
G3NA-410B
G3NA-D210B
G3NA-220B
100 to 240 VAC
5 to 24 VDC
—
10 A at 5 to 200 VDC*
(4 to 220 VDC)
100 to 240 VAC
5 to 24 VDC
Phototriac
Yes
20 A at 24 to 240 VAC*
(19 to 264 VAC)
Photocoupler
100 to 120 VAC
200 to 240 VAC
5 to 24 VDC
20 A at 200 to 480 VAC*
(180 to 528 VAC)
G3NA-420B
G3NA-240B
100 to 240 VAC
5 to 24 VDC
Phototriac
40 A at 24 to 240 VAC*
(19 to 264 VAC)
Photocoupler
100 to 120 VAC
200 to 240 VAC
5 to 24 VDC
40 A at 200 to 480 VAC*
(180 to 528 VAC)
G3NA-440B
G3NA-450B
100 to 240 VAC
5 to 24 VDC
50 A at 200 to 480 VAC*
(180 to 528 VAC)
*Loss time increases under 75 VAC.
Note: When ordering a TÜV-approved model, add “-UTU” to the model number as shown below:
Example: G3NA-210B-UTU.
Solid State Relay G3NA
1
■ Accessories (Order Separately)
Heat Sink
Low-cost Models
The following heat sinks are thin and can be DIN-track mounted
(except Y92B-P250).
See Dimensions for details.
Model
Applicable SSR
Y92B-A100
G3NA-205B, G3NA-210B, G3NA-D210B,
G3NA-220B, G3NA-410B, G3NA-420B
Model
Applicable SSR
Y92B-A150N G3NA-420B, G3NA-440B
Y92B-A250 G3NA-440B
Y92B-N50
G3NA-205B, G3NA-210B, G3NA-D210B,
G3NA-410B, G3NE-205T(L), G3NE-210T(L)
Y92B-N100
Y92B-N150
Y92B-P250
G3NA-220B, G3NA-420B, G3NE-220T(L)
G3NA-240B, G3NA-440B
G3NA-450B
Mounting Bracket
Used to mount the G3NA with a mounting dimension of 56 mm.
Model
R99-11
Applicable SSR
G3NA-420B, G3NA-440B
See Dimensions for details.
Specifications
■ Input Ratings
(Ambient temperature: 25°C)
Model
Rated
Operating
voltage
Impedance
Voltage level
voltage
(See note 1)
Must operate voltage
Must release voltage
1 VDC min.
G3NA-2@@B
5 to 24 VDC
4 to 32 VDC
7 mA max. (see note 2)
36 kΩ 20%
72 kΩ 20%
5 mA max. (see note 2)
72 kΩ 20%
4 VDC max.
100 to 120 VAC
200 to 240 VAC
5 to 24 VDC
75 to 132 VAC
150 to 264 VAC
4 to 32 VDC
75 VAC max. (see note 3)
20 VAC min. (see note 3)
150 VAC max. (see note 3) 40 VAC min. (see note 3)
G3NA-4@@B
G3NA-D210B
4 VDC max.
75 VAC max.
1 VDC min.
20 VAC min.
100 to 240 VAC
75 to 264 VAC
Note: 1. The input impedance is measured at the maximum value of the rated supply voltage (for example, with the model rated at 100 to 120
VAC, the input impedance is measured at 120 VAC).
2. With constant current input circuit system, the impedance for the G3NA-@@@B-UTU is 15 mA max.
3. Refer to the “Engineering Data” for further details.
■ Output Ratings
Model
Applicable load
Load current
With heat sink* Without heat sink
0.1 to 5 A 0.1 to 3 A
Rated
Load
Inrush current
load voltage
voltage range
G3NA-205B
G3NA-210B
G3NA-410B
G3NA-220B
G3NA-420B
G3NA-240B
G3NA-440B
G3NA-450B
G3NA-D210B
24 to 240 VAC
19 to 264 VAC
60 A (60 Hz, 1 cycle)
150 A (60 Hz, 1 cycle)
0.1 to 10 A
0.2 to 10 A
0.1 to 20 A
0.2 to 20 A
0.1 to 40 A
0.2 to 40 A
0.2 to 50 A
0.1 to 10 A
0.1 to 4 A
0.2 to 4 A
0.1 to 4 A
0.2 to 4 A
0.1 to 6 A
0.2 to 6 A
0.2 to 6 A
0.1 to 4 A
200 to 480 VAC
24 to 240 VAC
200 to 480 VAC
24 to 240 VAC
200 to 480 VAC
200 to 480 VAC
5 to 200 VDC
180 to 528 VAC
19 to 264 VAC
180 to 528 VAC
19 to 264 VAC
180 to 528 VAC
180 to 528 VAC
4 to 220 VDC
220 A (60 Hz, 1 cycle)
440 A (60 Hz, 1 cycle)
20 A (10 ms)
*When the appropriate size OMRON heat sink is used.
2
Solid State Relay G3NA
■ Characteristics
Item
G3NA-205B, -210B,
-220B
G3NA-240B
G3NA-410B, -420B,
-440B, -450B
G3NA-D210B
1 ms max.
Operate time
Release time
DC input
AC input
DC input
AC input
1/2 of load power source cycle + 1 ms max.
1 1/2 of load power source cycle + 1 ms max.
1/2 of load power source cycle + 1 ms max.
1 1/2 of load power source cycle + 1 ms max.
30 ms max.
5 ms max.
30 ms max.
Output ON voltage drop
Leakage current
1.6 V (RMS) max.
1.6 V (RMS) max.
1.8 V (RMS max.)
1.5 V max.
5 mA max. (at 100 VAC)
10 mA max. (at 200 VAC)
100 MΩ min (at 500 VDC)
10 mA max. at 200 VAC
20 mA max. at 400 VAC
5 mA max. at 200 VDC
Insulation resistance
Dielectric strength
2,500 VAC, 50/60 Hz for 1 minute
Vibration resistance Malfunction 10 to 55 Hz, 1.5 mm double amplitude
1,000 m/s2
Shock resistance
Malfunction
Operating
Storage
Ambient
temperature
-30° to 80°C (with no icing or condensation)
-30° to 100°C (with no icing or condensation)
Approved standards
UL508 File No. E64562/CSA C22.2 (No.0, No.14) File No. LR35535 (except for G3NA-450B)
TÜV R9151660 (EN60950) (except for G3NA-4@0B)
Ambient humidity
Weight
Operating
45% to 85%
Approx. 60 g (2.1 oz.)
Approx. 70 g (2.5 oz.) Approx. 80 g (2.8 oz.)
Approx. 70 g (2.5 oz.)
Note: Data shown are of initial value.
Solid State Relay G3NA
3
Engineering Data
Load Current vs. Ambient Temperature Characteristics
G3NA-205B
G3NA-210B/410B
G3NA-220B/420B
20
16
With standard heat sink
10
With standard heat
sink (Y92B-A100 or
Y92B-N100) or alumi-
num plate measuring
200 mm x 200 mm x
13.2 mm (W x H x D)
(Y92B-A100 or Y92B-
N50) or aluminum plate
measuring 75 mm x 75
mm x 13.2 mm
With standard heat sink
(Y92B-A100 or Y92B-N50)
or aluminum plate measur
ing 150 mm x 150 mm x
13.2 mm
-
8
(W x H x D)
(W x H x D)
Without heat sink
6
5
4
With iron plate measuring
100 x 100 x 0.8 (W x H x D)
With iron plate measuring
100 x 100 x 0.8 (W x H x D)
Without heat sink
2
0
Without heat sink
Ambient temperature (°C)
Ambient temperature (°C)
Ambient temperature (°C)
G3NA-240B
G3NA-440B
G3NA-D210B
20
50
With Y92B-
A250 or heat
sink with a ra
45
40
-
diation efficien-
10
cy of 1°C/W.
With standard heat
sink (Y92B-A150N
or Y92B-N150)
With standard heat sink
(Y92B-A100 or Y92B-N50)
or aluminum plate measur
ing 150 mm x 150 mm x
13.2 mm (W x H x D)
-
With standard heat
sink (Y92B-A150N or
Y92B-N150)
30
20
6
5
4
With iron plate measuring
100 x 100 x 0.8 (W x H x D)
With iron plate measuring
100 x 100 x 0.8 (W x H x D)
With iron plate measuring
100 x 100 x 0.8 (W x H x D)
Without heat sink
12
10
6
4
2
0
Without heat sink
Without heat sink
2
0
Ambient temperature (°C)
Ambient temperature (°C)
Ambient temperature (°C)
G3NA-450B
With standard heat sink
(Y92B-P250)
Without heat sink
Ambient temperature (°C)
4
Solid State Relay G3NA
Inrush Current Resistivity
Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.)
G3NA-205B
G3NA-210B/410B
G3NA-220B/420B
Energizing time (ms)
Energizing time (ms)
Energizing time (ms)
Temperature Characteristics
(with Must Operate Voltage
and Must Release Voltage)
G3NA-2@@B AC Input
G3NA-240B/440B/450B
G3NA-D210B
Energizing time (ms)
Energizing time (ms)
Ambient temperature (°C)
Heat Sink Size vs. Load Current
G3NA-220B
Ambient temperature
80°C
Ambient temperature
40°C
Note: The heat sink size refers to the combined area of the sides of the heat
sink that radiate heat. For example, when a current of 18 A is allowed to
flow through the SSR at 40° C, the graph shows that the heat sink size is
about 450 cm2. Therefore, if the heat sink is square, one side of the heat
sink must be 15 cm (152 x 2 = 450) or longer.
Aluminum plate
3.2 mm thick
Load current (A)
Solid State Relay G3NA
5
Dimensions
Note: All units are in millimeters unless otherwise indicated.
In the case of surface mounting, a 30% derating of the load current is required.
The orientation indicated by the external dimensions is not the correct mounting orientation. When opening mounting holes, refer to the mounting
hole dimensions.
G3NA-205B, G3NA-210B, G3NA-220B, G3NA-410B, G3NA-420B
Four, M4 x 8
screws
11.9
Mounting Holes
4.5 dia.
Terminal Arrangement/
Internal Connections
(Top View)
Two, 4.3-dia.
or M4 holes
Load
Load
power
58 max.
47.5
44
supply
Load
1
2
47.6 0.2
(−)
(+)
3
13.8
25 max.
27 max.
Operating
indicator
4
4.5
25
43 max.
Input
G3NA-240B, G3NA-440B, G3NA-450B
11.9
4.5 dia.
Terminal Arrangement/
Internal Connections
(Top View)
Mounting Holes
Two, M5 x 12 screws
Two, 4.3-dia.
or M4 holes
Load
Load
power
58 min.47.5
44
supply
Load
1
2
47.6 0.2
Operating
(−)
4
(+)
3
indicator
13.8
4.5
25
Input
25 max.
Two,
27 max.
M 4 x 8
43 max.
G3NA-D210B
Note: The load can be connected to either the positive or negative side.
Four, M4 x 8
screws
11.9
Mounting Holes
Terminal Arrangement/
Internal Connections
(Top View)
4.5 dia.
Two, 4.3-dia.
or M4 holes
Load
Load
power
supply
58 max.
47.5 44
Load
1
−
2
+
47.6 0.2
(−)
4
(+)
3
Operating
indicator
13.8
25 max.
27 max.
Input
4.5
25
43 max.
6
Solid State Relay G3NA
Heat Sink
Y92B-N50
Mounting Holes
Two, 4.4-dia.
or M4 holes
4.6 dia.
Two, M3 holes
Two, M4 holes
Two, 3.2-dia. holes
44 max.
30
5
30.5 0.3
35
47 max.
4.5
90 0.4
47.6
5.6
6
77 max.
90 0.3
51 max.
100 max.
35 0.2
Weight: approx. 200 g
Y92B-N100
Mounting Holes
Two, M4
holes
Two, M3 holes
Two, 3.2-dia. holes
Two, 4.4-dia.
or M4 holes
4.6 dia.
71 max.
5.6
30
3530.5 0.3
75 max.
90 0.4
13
4.5
47.6
5
28
100 max.
77 max.
90 0.3
100 max.
35 0.2
Weight: approx. 400 g
Y92B-N150
Mounting Holes
47.6
Two, 3.2-dia. holes
Three,
M4 holes
Two, 4.4-dia.
or M4 holes
4.6 dia.
35
30
100 max.
104 max.
28
5
56 0.3
77 max.
90 0.3
5.6
4.5
13
100 max.
Weight: approx. 560 g
100 max.
Y92B-A100
Y92B-A150N
Y92B-A250
Three, M4 holes
Three, M4 holes
Two, M4 holes
102 max.
80.5 max.
1.5
47.6
47.6
R2.2
R2.2
9.6
2
1.5
30
45.5 max.
50 0.1
56 0.5
150 max.
50 0.1
56 0.5
250 max.
47.6
50 0.1
100 max.
Solid State Relay G3NA
7
Mounting Holes
Y92B-A100
Y92B-A150
Y92B-A250
Mounting Holes
Four, 4.5 dia. or M4
Four, M4
Four, 4.3-dia. or M4 holes
190.5 max.
90+0.1
50+0.1
Four, R2.5
130.5 max.
70 max.
Y92B-P250
Four, M4
Mounting Holes
Four, 4.5 dia. or M4
190.5 max.
Four, R2.5
130.5 max.
70 max.
R99-11
16
8
5
12.5
56
21
Use Mounting Bracket R99-11 so that the
G3NA-240B can be mounted with the same
pitch as that of the G3N-240B.
4
4.6
8
Solid State Relay G3NA
Precautions
Refer to pages 11 to 19 for general precautions.
EN55011 Measurement of Mains
Terminal Disturbance Voltage
The G3NA-UTU conforms to EN55011 standards when a capacitor is
connected to the load power supply as shown in the following circuit
diagram.
■ Load Connection
For an AC load, use a power supply rated at 50 or 60 Hz.
The maximum operating frequency is 10 Hz.
The G3NA has a built-in varistor for overvoltage protection.
Load
■ Zero Cross Function
Input
G3NA-UTU
Output
An SSR with a zero cross function operates when an AC load volt-
age reaches the zero point or its vicinity. This reduces clicking noises
when the load is input, and minimizes the influence of an inductive
load, such as a lamp, heater, or motor, on the power supply because
the inrush current of the load is reduced. This can also minimize the
scale of the inrush current protection circuit.
Recommended Capacitor:
Nissei Denki’s MKT-series R40 (1 µF)
The output terminal side of the G3NA-D210B is connected to a built-
in diode for protecting the SSR from damage that may result from
reverse connection. The SSR, however, cannot withstand one min-
ute or more if the wires are connected in reverse order. Therefore,
pay the utmost attention not to make polarity mistakes on the load
side.
Output (load voltage)
ON
Input
OFF
At a low applied voltage, such as 24 VAC, the load current is not fully
supplied. When the Unit is switched ON, the voltage required to
power the Unit deprives the output signal of the necessary voltage
level and thus creates loss time. The lower the load voltage is, the
greater the loss time is. This condition, however, will not create any
serious problems.
Loss time
For a DC or L load, a diode should be connected in parallel the load
to absorb the counter electromotive force of the load.
Load
Load power
supply
Input
SSR
When attaching a heat sink to the G3NA, apply Silicone Grease or
equivalent heat conductive grease on the heat sink. (Toshiba Silicon,
Shinetsu Silicon, etc.)
Tighten the mounting screws of the heat sink with a torque of 0.78 to
0.98 N•m.
Solid State Relay G3NA
9
(c) Energy control systems, combustion systems, railroad systems, aviation systems,
medical equipment, amusement machines, vehicles, safety equipment, and
installations subject to separate industry or government regulations.
(d) Systems, machines, and equipment that could present a risk to life or property.
3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE
PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE
WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
Omron Electronic Components, LLC
Terms and Conditions of Sales
I. GENERAL
1. Definitions: The words used herein are defined as follows.
(a) Terms:
(b) Seller:
(c) Buyer:
These terms and conditions
Omron Electronic Components LLC and its subsidiaries
The buyer of Products, including any end user in section III through VI
(d) Products: Products and/or services of Seller
4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED
VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY
SELLER.
(e) Including: Including without limitation
2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,
invoices, purchase orders and other documents, whether electronic or in writing, relating
to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's
purchase order or other documents which are inconsistent with, or in addition to, these
Terms.
5. Programmable Products: Seller shall not be responsible for the Buyer's programming of
a programmable Product.
IV. WARRANTY AND LIMITATION
3. Distributor: Any distributor shall inform its customer of the contents after and including
1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in
materials and workmanship for a period of twelve months from the date of sale by Seller
(or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY
OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES,
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OF THE PRODUCTS.
section III of these Terms.
II. SALES
1. Prices; Payment: All prices stated are current, subject to change without notice by Seller.
Buyer agrees to pay the price in effect at time of shipment. Payments for Products
received are due net 30 days unless otherwise stated in the invoice. Buyer shall have no
right to set off any amounts against the amount owing in respect of this invoice.
2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to
Buyer after deducting transportation charges, taxes and duties, and will be allowed only
if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past
due amounts owing to Seller.
2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form
originally shipped with Buyer responsible for labor charges for removal or replacement
thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an
amount equal to the purchase price of the Product; provided that there shall be no
liability for Seller or its affiliates unless Seller's analysis confirms that the Products were
handled, stored, installed and maintained and not subject to contamination, abuse,
misuse or inappropriate modification. Return of any Products by Buyer must be
approved in writing by Seller before shipment.
3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum
legal rate, whichever is less, on any balance not paid within the stated terms.
4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.
5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer
shall make remittance to Seller at the then current exchange rate most favorable to
Seller; provided that if remittance is not made when due, Buyer will convert the amount
to U.S. dollars at the then current exchange rate most favorable to Seller available
during the period between the due date and the date remittance is actually made.
6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining
any government approvals regarding the importation or sale of the Products.
7. Taxes: All taxes, duties and other governmental charges (other than general real property
and income taxes), including any interest or penalties thereon, imposed directly or
indirectly on Seller or required to be collected directly or indirectly by Seller for the
manufacture, production, sale, delivery, importation, consumption or use of the Products
sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall
be charged to and remitted by Buyer to Seller.
3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED
WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,
WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL
LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF
THE PRODUCT ON WHICH LIABILITY IS ASSERTED.
4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its
employees from and against all liabilities, losses, claims, costs and expenses (including
attorney's fees and expenses) related to any claim, investigation, litigation or proceeding
(whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or
omissions under these Terms or in any way with respect to the Products.
V. INFORMATION; ETC.
8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller,
Seller reserves the right to stop shipments or require satisfactory security or payment in
advance. If Buyer fails to make payment or otherwise comply with these Terms or any
related agreement, Seller may (without liability and in addition to other remedies) cancel any
unshipped portion of Products sold hereunder and stop any Products in transit until
Buyer pays all amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.
1. Intellectual Property: The intellectual property embodied in the Products is the exclusive
property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way
without the written permission of Seller. Buyer (at its own expense) shall indemnify and
hold harmless Seller and defend or settle any action brought against Seller to the extent
that it is based on a claim that any Product made to Buyer specifications infringed
intellectual property rights of another party.
2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or
tooling, all engineering and tooling shall remain the exclusive property of Seller. All
information and materials supplied by Seller to Buyer relating to the Products are
confidential and proprietary, and Buyer shall limit distribution thereof to its trusted
employees and strictly prevent disclosure to any third party.
9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer
indemnifies Seller fully against all costs or expenses arising in connection therewith.
10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from
causes beyond its control, including earthquakes, fires, floods, strikes or other labor
disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots,
delay in or lack of transportation or the requirements of any government authority.
11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:
(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise
stated in writing by Seller), at which point title to and all risk of loss of the Products shall
pass from Seller to Buyer, provided that Seller shall retain a security interest in the
Products until the full purchase price is paid by Buyer;
3. Performance Data: Performance data is provided as a guide in determining suitability
and does not constitute a warranty. It may represent the result of Seller's test conditions,
and the users must correlate it to actual application requirements.
4. Change In Specifications: Product specifications and description may be changed at any
time based on improvements or other reasons. It is Seller’s practice to change part
numbers when published ratings or features are changed, or when significant
engineering changes are made. However, some specifications of the Product may be
changed without any notice.
(b) Delivery and shipping dates are estimates only; and
5. Errors And Omissions: The information on Seller’s website or in other documentation
has been carefully checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses
regarding (a) export of the Products or information provided by Seller; (b) sale of
Products to forbidden or other proscribed persons or organizations; (c)disclosure to
non-citizens of regulated technology or information.
(c) Seller will package Products as it deems proper for protection against normal
handling and extra charges apply to special conditions.
12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products
occurring before delivery to the carrier must be presented in detail in writing to Seller
within 30 days of receipt of shipment.
III. PRECAUTIONS
VI. MISCELLANEOUS
1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY
OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE
APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING
APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE
BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC
COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E)
SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT.
Buyer acknowledges that it alone has determined that the Products will meet their
requirements of the intended use in all cases. Buyer must know and observe all
prohibitions of use applicable to the Product/s.
1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing
between Buyer and Seller shall operate as a waiver of rights by Seller.
2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent.
3. Law: These Terms are governed by Illinois law (without regard to conflict of laws). Federal
and state courts in Illinois have exclusive jurisdiction for any dispute hereunder.
4. Amendment: These Terms constitute the entire agreement between Buyer and Seller
relating to the Products, and no provision may be changed or waived unless in writing
signed by the parties.
5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall
not invalidate any other provision.
2. Use with Attention: The followings are some examples of applications for which
particular attention must be given. This is not intended to be an exhaustive list of all
possible use of any Product, nor to imply that any use listed may be suitable for any
Product:
(a) Outdoor use, use involving potential chemical contamination or electrical
interference.
(b) Use in consumer Products or any use in significant quantities.
10
Solid State Relay G3NA
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any stan- 2. Programmable Products. Seller shall not be responsible for the user's
dards, codes or regulations which apply to the combination of the Product in
programming of a programmable product, or any consequence thereof.
Buyer's application or use of the Product. At Buyer's request, Seller will pro- 3. Performance Data. Performance data given in this publication is provided as
vide applicable third party certification documents identifying ratings and limi-
tations of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in com-
bination with the end product, machine, system, or other application or use.
a guide for the user in determining suitability and does not constitute a war-
ranty. It may represent the result of Seller's test conditions, and the users must
correlate it to actual application requirements. Actual performance is subject to
Seller's Warranty and Limitations of Liability.
Buyer shall be solely responsible for determining appropriateness of the par- 4. Change in Specifications. Product specifications and accessories may be
ticular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a non-
exhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to separate industry or government
regulations.
(iii) Use in consumer products or any use in significant quantities.
(iv) Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to this
product.
changed at any time based on improvements and other reasons. It is our prac-
tice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifica-
tions of the Product may be changed without any notice. When in doubt, spe-
cial part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Seller representative at any time to
confirm actual specifications of purchased Product.
5. Errors and Omissions. The information in this publication has been carefully
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors, or omissions.
6. RoHS Compliance. Where indicated, our products currently comply, to the
best of our knowledge as of the date of this publication, with the requirements
of the European Union's Directive on the Restriction of certain Hazardous
Substances ("RoHS"), although the requirements of RoHS do not take effect
until July 2006. These requirements may be subject to change. Please consult
our website for current information.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
Solid State Relay G3NA
11
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
01/07
Specifications subject to change without notice
Printed in USA
Cat. No. J01C-E-01
12
Solid State Relay G3NA
相关型号：
©2020 ICPDF网 联系我们和版权申明