E2E-X2E1-N [OMRON]
Analog Circuit;型号: | E2E-X2E1-N |
厂家: | OMRON ELECTRONICS LLC |
描述: | Analog Circuit |
文件: | 总15页 (文件大小:298K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
R
Short Barrel Inductive Prox
E2E 3-WIRE DC
Short Barrel 3-Wire Prox Sensors
Meet IP67
H Thick nickel-plated brass barrel has
wrench flats for easy installation
H Solid potted internal circuitry withstands
shocks and water washdown to IP67
H High visibility indicator
H Miniature and standard sizes
Ordering Information
WHEN ORDERING, PLEASE NOTE: Omron has added the suffix “-N” to standard size E2E part numbers for ordering purposes only; the
suffix “-N” will not appear on the product.
J PREWIRED MINIATURE SENSORS
Part number
NO
Type
Size
Sensing distance Output
configuration
NC
4 mm
dia.
NPN
PNP
NPN
PNP
NPN
PNP
E2E-CR8C1
E2E-CR8B1
E2E-X1C1
E2E-X1B1
E2E-C1C1
E2E-C1B1
E2E-CR8C2
E2E-CR8B2
E2E-X1C2
E2E-X1B2
E2E-C1C2
E2E-C1B2
Shielded
0.8 mm
1 mm
M5
5.4 mm
dia.
1 mm
J PREWIRED SHIELDED STANDARD SENSORS
Part number
NO
Type
Size
Sensing distance Output
configuration
NC
M8
NPN
PNP
NPN
PNP
NPN
PNP
NPN
PNP
E2E-X1R5E1-N
E2E-X1R5F1-N
E2E-X2E1-N
E2E-X2F1-N
E2E-X5E1-N
E2E-X5F1-N
E2E-X10E1-N
E2E-X10F1-N
E2E-X1R5E2-N
E2E-X1R5F2-N
E2E-X2E2-N
E2E-X2F2-N
E2E-X5E2-N
E2E-X5F2-N
E2E-X10E2-N
E2E-X10F2-N
Shielded
1.5 mm
M12
M18
M30
2 mm
5 mm
10 mm
Note: 1. A different oscillating frequency is available. Add a “5” to the part number (e.g., E2E-X5E15-N).
2. E2E sensors with robotic cable are available. Add a “-R” in the part number (e.g., E2E-X5E1-R-N).
E2E 3-Wire DC
E2E 3-Wire DC
J PREWIRED UNSHIELDED STANDARD SENSORS
Part number
NO
Type
Size
Sensing distance Output
configuration
NC
M8
NPN
PNP
NPN
PNP
NPN
PNP
NPN
PNP
E2E-X2ME1-N
E2E-X2MF1-N
E2E-X5ME1-N
E2E-X5MF1-N
E2E-X10ME1-N
E2E-X10MF1-N
E2E-X18ME1-N
E2E-X18MF1-N
E2E-X2ME2-N
E2E-X2MF2-N
E2E-X5ME2-N
E2E-X5MF2-N
E2E-X10ME2-N
E2E-X10MF2-N
E2E-X18ME2-N
E2E-X18MF2-N
Unshielded
2 mm
M12
5 mm
10 mm
M18
M30
18 mm
Note: 1. A different oscillating frequency is available. Add a “5” to the part number (e.g., E2E-X5E15-N).
2. E2E sensors with robotic cable are available. Add a “-R” in the part number (e.g., E2E-X5E1-R-N).
J SENSORS WITH BUILT-IN M12 MICROCHANGER CONNECTOR
Part number
Type
Size
Sensing distance Output
configuration
NO
NC
M8
NPN
PNP
NPN
PNP
NPN
PNP
NPN
PNP
NPN
PNP
NPN
PNP
NPN
PNP
NPN
E2E-X1R5E1-M1-N
E2E-X1R5F1-M1-N
E2E-X2E1-M1-N
E2E-X2F1-M1-N
E2E-X5E1-M1-N
E2E-X5F1-M1-N
E2E-X10E1-M1-N
E2E-X10F1-M1-N
E2E-X2ME1-M1-N
E2E-X2MF1-M1-N
E2E-X5ME1-M1-N
E2E-X5MF1-M1-N
E2E-X10ME1-M1-N
E2E-X10MF1-M1-N
E2E-X18ME1-M1-N
E2E-X1R5E2-M1-N
E2E-X1R5F2-M1-N
E2E-X2E2-M1-N
E2E-X2F2-M1-N
E2E-X5E2-M1-N
E2E-X5F2-M1-N
E2E-X10E2-M1-N
E2E-X10F2-M1-N
E2E-X2ME2-M1-N
E2E-X2MF2-M1-N
E2E-X5ME2-M1-N
E2E-X5MF2-M1-N
E2E-X10ME2-M1-N
E2E-X10MF2-M1-N
E2E-X18ME2-M1-N
Shielded
1.5 mm
2 mm
M12
M18
M30
M8
5 mm
10 mm
Unshielded
2 mm
M12
M18
M30
5 mm
10 mm
PNP
E2E-X18MF1-M1-N
E2E-X18MF2-M1-N
18 mm
R
Note: Connector cordsets: For MicroChange models, use OMRON Y96E-4jDj.
J SENSORS WITH BUILT-IN M8 NANOCHANGER CONNECTOR
Part number
NO
Type
Size
Sensing distance Output
configuration
NC
M8
NPN
PNP
NPN
PNP
E2E-X1R5E1-M3
E2E-X1R5E2-M3
Shielded
1.5 mm
2 mm
E2E-X1R5F1-M3
E2E-X2ME1-M3
E2E-X2MF1-M3
E2E-X1R5F2-M3
E2E-X2ME2-M3
E2E-X2MF2-M3
M8
Unshielded
R
Note: Connector cordsets: For NanoChange models, use OMRON X3SF-M42j-40j-R or Brad Harrison equivalent.
2
E2E 3-Wire DC
E2E 3-Wire DC
J ACCESSORIES
Description
Part number
Y92E-B8
Mounting brackets
Fits M8 size sensors
Fits M12 size sensors
Fits M18 size sensors
Fits M30 size sensors
Fits M12 size sensors
Fits M18 size sensors
Fits M30 size sensors
Y92E-B12
Y92E-B18
Y92E-B30
Y92E-E12-2
Y92E-E18-2
Y92E-E30-2
Silicone rubber covers for shielded sensors
J REPLACEMENT PARTS
Description
Part number
M5-MHWS
M8-MHWS
M12-MHWS
M18-MHWS
M30-MHWS
Mounting hardware including one pair of
metal nuts and one washer
Fits M5 size sensors
Fits M8 size sensors
Fits M12 size sensors
Fits M18 size sensors
Fits M30 size sensors
3
E2E 3-Wire DC
E2E 3-Wire DC
Specifications
J MINIATURE SENSORS
Part number
Size
E2E-CR8jj
E2E-X1jj
E2E-C1jj
4 mm (0.16 in) dia.
Shielded
M5
5.5 mm (0.21 in) dia.
Type
Sensing distance
Supply voltage
Current consumption
Sensing object
Setting distance
0.8 mm (0.03 in) ± 15%
1 mm (0.04 in) ± 15%
10 to 30 VDC, 10% max. permissible ripple peak to peak
17 mA max.
Magnetic metals
0 to 0.5 mm (0 to 0.02 in)
0 to 7 mm (0 to 0.03 in)
Standard object
5 x 5 x 1 mm (0.2 x 0.2 x 0.04 in)
8 x 8 x 1 mm (0.3 x 0.3 x 0.04 in)
(mild steel, L x W x H)
Differential travel
15% max. of effective distance
3 kHz
Response frequency
Control
output
Operation C1 models: NPN-NO open collector
C2 models: NPN-NC open collector
B1 models: PNP-NO open collector
B1 models: PNP-NC open collector
Max. load
100 mA switching capacity
2 VDC
Max.
on-state
voltage
drop
Circuit protection
Indicators
DC power supply reverse polarity
Operation indicator (red LED)
Ambient
Operating –25°C to 70°C (–13°F to 158°F) with no icing
temperature
Ambient
humidity
Operating 35% to 95%
Vibration resistance
Shock resistance
10 to 55 Hz, 1.5 mm (0.06 in) double amplitude
Approx. 50 G’s
—
Enclosure
rating
UL
NEMA
IEC 144
1, 3, 4, 6, 12, 13
IP67
Weight with cable
Approx. 30 g (1.1 oz.)
Materials
Housing
Stainless steel
Plastic PBT
Nickel-plated brass
Nickel-plated brass
Sensing
face
Cable
Polyvinyl chloride
sheath
4
E2E 3-Wire DC
E2E 3-Wire DC
J STANDARD SIZE SENSORS
Part number
E2E-X1R5 E2E-X2ME E2E-X2Ej E2E-X5ME E2E-X5Ej E2E-X10M E2E-X10E
E2E-X18M
Ej/Fj-N
j/ Fj-N
/ Fj-N
j/Fj-N
/ Fj-N
Ej/Fj-N
j/ Fj-N
Ej/ Fj-N
Size
M8
M12
M18
M30
Type
Shielded
Unshielded Shielded
Unshielded Shielded
Unshielded Shielded
Unshielded
Sensing distance
1.5 mm
(0.06 in)
±10%
2 mm (0.08 2 mm (0.08 5 mm (0.20 5 mm (0.20 10 mm
10 mm
(0.39 in)
±10%
18 mm
(0.71 in)
±10%
in) ±10%
in) ±10%
in) ±10%
in) ±10%
(0.39 in)
±10%
Supply voltage
(operating voltage
range) (See Note 1.)
12 to 24 VDC, ripple (p-p): 10% max., (10 to 40 VDC)
13 mA max.
Current consumption
Sensing object
Magnetic metals (refer to Engineering Data for non-magnetic metals)
Setting distance
0 to 1.2
mm (0 to
0.05 in)
0 to 1.6
mm (0 to
0.06 in)
0 to 1.6 mm 0 to 4.0 mm 0 to 4.0 mm 0 to 8.0 mm 0 to 8.0 mm 0 to 14.0
(0 to 0.06
in)
(0 to 0.16
in)
(0 to 0.16
in)
(0 to 0.31
in)
(0 to 0.31
in)
mm (0 to
0.55 in)
Standard object
(mild steel)
8 x 8 x
1 mm (0.31 1 mm
12 x 12 x
12 x 12 x
1 mm
15 x 15 x
1 mm
18 x 18 x
1 mm
30 x 30 x
1 mm
30 x 30 x
1 mm
54 x 54 x
1 mm
x 0.31 x
0.04 in)
(0.47 x 0.47 (0.47 x 0.47 (0.59 x 0.59 (0.71 x 0.71 (1.18 x 1.18 (1.18 x 1.18 (2.13 x 2.13
x 0.04 in)
x 0.04 in)
x 0.04 in)
x 0.04 in)
x 0.04 in)
x 0.04 in)
x 0.04 in)
Differential travel
10% max. of sensing distance
2.0 kHz 0.8 kHz 1.5 kHz
Response frequency
0.4 kHz
0.6 kHz
0.2 kHz
0.4 kHz
0.1 kHz
Operation (with
sensing object
approaching)
E1 models: Load ON
E2 models: Load OFF
Control output
200 mA max.
(switching capacity)
Circuit protection
Indicator
Reverse connection protection, surge absorber, load short-circuit protection
Operation indicator (red LED)
Ambient temperature
(See Note 2.)
Operating: –40°C to 85°C (–40°F to 185°F) with no icing
Ambient humidity
Operating: 35% to 95%
Temperature
influence
±15% max. of sensing distance at 23°C in temperature range of –40°C to 85°C (–40°F to 185°F)
±10% max. of sensing distance at 23°C in temperature range of –25°C to 70°C (–13°F to 158°F)
Voltage influence
Residual voltage
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
±1% max. of sensing distance in rated voltage range ±15%
2.0 V max. (under load current of 200 mA with cable length of 2 m)
50 MΩ min. (at 500 VDC) between current carry parts and case
1,000 VAC for 1 min. between current carry parts and case
10 to 55 Hz, 1.5-mm double amplitude for 2 hrs each in X, Y, and Z axes
2
2
500 m/s (approx. 50G)
1,000 m/s (approx. 50G) for 10 times each in X, Y, and Z axes
2
for 10 times each in X, Y, 500 m/s (approx. 50G) for E2E-X5M
and Z axes
Enclosure
rating
IEC
IP67
NEMA
1, 4, 6, 12, 13
Weight
Pre-wired Approx. 45 g
Connector ---
Approx. 120 g
Brass
Approx. 160 g
Approx. 45 g
Approx. 270 g
Approx. 25 g
Approx.
125 g
Approx.
124 g
Material
Body
Stainless steel
PBT
Sensing
face
Note: 1. E2E models with an M18 or M30 connector operate at a non-smoothed, all-wave rectified, mean voltage range of 24 VDC ±20%.
2. When using an E2E with an M8 connector at an ambient temperature range between 70°C and 85°C (158°F and 185°F), supply
10 to 30 VDC to the E2E and make sure that the E2E has a control output of 100 mA maximum.
5
E2E 3-Wire DC
E2E 3-Wire DC
Operation
J OUTPUT CIRCUITS
Miniature Models
E2E-C/XjCj
E2E-C/XjBj
NPN Output
PNP Output
Brown
Black
Brown
100Ω
Black
Main
Circuit
Main
Circuit
Output
Output
100Ω
Blue
Blue
*100 mA max. (sink current)
2 V max. (residual voltage)
*100 mA max. (source current)
2 V max. (residual voltage)
E2E-C(X)jB1
NO
E2E-C(X)jB2
NC
E2E-C(X)jC1
NO
E2E-C(X)jC2
NC
Present
Absent
Present
Absent
Present
Absent
Present
Absent
Target
Target
Load (between
black and blue)
Operates
Releases
Operates
Releases
Load (between
brown and black)
Operates
Releases
Operates
Releases
ON
OFF
ON
OFF
Operation indicator
(LED)
Operation indicator
(LED)
ON
OFF
ON
OFF
Standard Size Models
E2E-XjEj-N
E2E-XjFj-N
NPN Output
PNP Output
Brown
Brown
+V
+V
Load
1.5 to 3 mA
Black
Blue
Black
Blue
Load
1.5 to 3 mA
0V
0V
Sensing
object
Yes
No
Lit
Sensing
object
Yes
No
Lit
Red
indicator
Red
indicator
Not lit
Not lit
ON
OFF
H
Control
output
ON
Control
output
OFF
Output
voltage
L
6
E2E 3-Wire DC
E2E 3-Wire DC
Engineering Data
J OPERATING RANGE (TYPICAL)
Shielded Models
E2E-CR8jj, E2E–X1jj,
E2E-C1jj
E2E-XjEj/Fj-N
Operating
distance X
[mm]
E2Ej–X10j
E2E-X1/E2E-C1
E2Ej-X2j
1.0
E2Ej-X1R5j
E2E-CR8
E2Ej–X5j
0.4
0.2
–3.0
–2.0
–1.0
0
1.0
2.0
3.0
Y (mm)
Y (mm)
Shielded Models
E2E-XjMEj/Fj-N
E2Ej-X5Mj
E2Ej-X18Mj
E2Ej-X10Mj
E2Ej-X2Mj
Y (mm)
Y (mm)
J SENSING DISTANCE VS. SENSING OBJECT (TYPICAL)
E2E-CR8jj-N
E2E-X1jj-N, E2E-C1jj-N
E2E-X1R5Ej/Fj-N
t = 1 mm
t = 1 mm
Mild
steel
Stainless
(SUS304)
steel
Mild
steel
Stainless steel
(SUS304)
Stainless
steel
(SUS304)
Brass
Aluminum
Brass
Aluminum
t = 1 mm
Copper
Side length of target object d (mm)
Side length of target object d (mm)
Side length of target object d (mm)
7
E2E 3-Wire DC
E2E 3-Wire DC
E2E-X2Ej/Fj-N
E2E-X5Ej/Fj-N
E2E-X10EjFj-N
t = 1 mm
Mild steel
Mild steel
Mild steel
Stainless steel
(SUS304)
Stainless steel
(SUS304)
Stainless steel
(SUS304)
t = 1 mm
Brass
Brass
Brass
t = 1 mm
Aluminum
Aluminum
Aluminum
Side length of target object d (mm)
E2E-X2MEj/Fj-N
Side length of target object d (mm)
E2E-X5MEj/Fj-N
Side length of target object d (mm)
E2E-X10MEj/Fj-N
t = 1 mm
Mild steel
Mild steel
Mild steel
Stainless steel
(SUS304)
Stainless steel
(SUS304)
Stainless steel
(SUS304)
Brass
Brass
Alumi-
num
Brass
Copper
t = 1 mm
Aluminum
Aluminum
Side length of target object d (mm)
Side length of target object d (mm)
Side length of target object d (mm)
E2E-X18MEj/Fj-N
E2E-X18MYj-N
t = 1 mm
Mild steel
Stainless steel
(SUS304)
Brass
Aluminum
Side length of target object d (mm)
8
E2E 3-Wire DC
E2E 3-Wire DC
Dimensions
J DRAWING LOCATOR
Type
Part number
Figure number
Prewired
Shielded
4 mm dia.
M5
E2E-CR8j
1
E2E-X1j
2
5.4 mm dia.
M8
E2E-C1j
3
E2E-X1R5Ej/Fj-N
E2E-X2Ej/Fj-N
4
M12
M18
M30
M8
6
E2E-X5Ej/Fj-N
8
E2E-X10Ej/Fj-N
10
5
Prewired
Unshielded
Shielded
E2E-X2MEj/Fj-N
M12
M18
M30
M8
E2E-X5MEj/Fj-N
7
E2E-X10MEj/Fj-N
E2E-X18MEj/Fj-N
E2E-XR5MEj-M1/Fj-M1-N
E2E-X2MEj-M1/Fj-M1-N
E2E-X5MEj-M1/Fj-M1-N
E2E-X10MEj-M1/Fj-M1-N
E2E-X2MEj-M1/Fj-M1-N
E2E0-X5MEj-M1/Fj-M1-N
E2E-X10MEj-M1/Fj-M1-N
E2E-X18MEj-M1/Fj-M1-N
E2E-X1R5Ej-M3/jF-M3-N
E2E-X2MEj-M3/jF-M3-N
9
11
12
14
16
18
13
15
17
19
20
21
4-pin
connector
(M12)
M12
M18
M30
M8
Unshielded
M12
M18
M30
M8
M8 connector
Shielded
Unshielded
Unit: mm (inch)
J SENSORS
Miniature Shielded DC Types
Fig. 1:
E2E-CR8C(B)j
Fig. 2:
E2E-X1C(B)j
Fig. 3:
E2E-C1C(B)j
9
E2E 3-Wire DC
E2E 3-Wire DC
Prewired Models
(Shielded)
Prewired Models
(Unshielded)
Fig. 4:
E2E-X1R5Ej/Fj-N
Fig. 5:
E2E-X2MEj/Fj-N
30 (1.18)
30 (1.18)
26 (1.02)
15 dia. (0.59)
15 dia. (0.59)
26 (1.02)
6
(0.24)
6.1 dia.
Round vinyl-insulated cable
dia. (0.08 dia. 60),
2/3 cores
4 dia. (0.08 dia. x 6/10) for
robotics cable models
Standard length: 2 m
Operation
indicator
Two clamping nut 2/3 cores
Operation
indicator
Two clamping nut
Round vinyl-insulated cable
dia. (0.08 dia. 60),
M8 x 1
M8 x 1
4
x
4
x
4 dia. (0.08 dia. x 6/10) for
robotics cable models
Standard length: 2 m
Toothed washer
Toothed washer
Fig. 6:
E2E-X2Ej/Fj-N
Fig.7:
E2E-X5MEj/Fj-N
38 (1.50)
33 (1.30)
21 dia. (0.83)
38 (1.50)
33 (1.30)
21 dia. (0.83)
7
(0.28)
Operation
indicator
Round vinyl-insulated cable
Round vinyl-insulated cable
dia. (0.08 dia. 60),
2/3 cores
4 dia. (0.08 dia. x 6/10) for
robotics cable models
Standard length: 2 m
Operation
indicator
Two clamping
9 dia.
M12 x 1
4
dia. (0.08 dia.
x 60),
4
x
M12 x 1
2/3 cores
Two clamping nut
Toothed washer
4 dia. (0.08 dia. x 6/10) for
robotics cable models
Standard length: 2 m
nut
Toothed washer
Fig. 8:
E2E-X5Ej/Fj-N
Fig. 9:
E2E-X10MEj/Fj-N
43 (1.69)
38 (1.50)
43 (1.69)
38 (1.50)
29 dia. (1.14)
29 dia. (1.14)
10
(0.39)
14.8 dia.
M18 x 1
Operation
indicator
Round vinyl-insulated Cable
6 dia. (0.12 dia. x 45),
2/3 cores
6 dia. (0.08 dia. x 6/17)
robotics cable models
Standard length: 2 m
Round vinyl-insulated
Cable 6 dia. (0.12 dia.
x 45), 2/3 cores
6 dia. (0.08 dia. x 6/17)
robotics cable models
Standard length: 2 m
Operation
indicator
Two clamping nut
Toothed washer
M18 x 1
Two clamping nut
Toothed washer
Fig. 10:
E2E-X10Ej/Fj-N
Fig. 11:
E2E-X18MEj/Fj-N
48 (1.89)
48 (1.89)
43 (1.69)
42 dia. (1.65)
43 (1.69)
42 dia. (1.65)
13
(0.51)
Round vinyl-insulated
Cable 6 dia. (0.12 dia.
x 45), 2/3 cores
6 dia. (0.08 dia. x 6/17)
robotics cable models
Standard length: 2 m
Operation
indicator
26.8 dia.
Operation indicator
M30 x 1.5
M30 x 1.5
Toothed washer
Round vinyl-insulated Cable
6 dia. (0.12 dia. x 45),
2/3 cores
Two clamping
nut
Two clamping nut
Toothed washer
6 dia. (0.08 dia. x 6/17)
robotics cable models
Standard length: 2 m
10
E2E 3-Wire DC
E2E 3-Wire DC
Connector Models
(Shielded)
Connector Models
(Unshielded)
Fig. 12:
E2E-X1R5Ej-M1/Fj-M1-N
Fig. 13:
E2E-X2MEj-M1/Fj-M1-N
43 (1.69)
30 (1.18)
26 (1.02)
43 (1.69)
30 (1.18)
26 (1.02)
15 dia. (0.59)
15 dia. (0.59)
M12 x 1
6
M12 x 1
(0.24)
Operation indicator
Two clamping nut
6.1 dia.
M8 x 1
Operation indicator
Two clamping nut
M8 x 1
Toothed washer
Toothed washer
Fig. 14:
E2E-X2Ej-M1/Fj-M1-N
Fig. 15:
E2E-X5MEj-M1/Fj-M1-N
48 (1.89)
21 dia. (0.83)
48 (1.89)
21 dia. (0.83)
33 (1.30)
M12 x 1
33 (1.30)
M12 x 1
7
(0.28)
Operation indicator
Operation indicator
9 dia.
M12 x 1
M12 x 1
Two clamping nut
Toothed washer
Two clamping nut
Toothed washer
Fig. 16:
E2E-X5Ej-M1/Fj-M1-N
Fig.17:
E2E-X10MEj-M1/Fj-M1-N
53 (2.09)
38 (1.50)
53 (2.09)
29 dia. (1.14)
29 dia. (1.14)
38 (1.50 )
10
(0.39)
M12 x 1
M12 x 1
Operation indicator
Operation indicator
14.8 dia.
M18 x 1
M18 x 1
Two clamping nut
Toothed washer
Two clamping nut
Toothed washer
Fig.18:
E2E-X10Ej-M1/Fj-M1-N
Fig. 19:
E2E-X18MEj-M1/Fj-M1-N
58 (2.28)
43 (1.69)
58 (2.28)
42 dia. (1.65)
42 dia. (1.65)
43 (1.69)
13
(0.51)
M12 x 1
Operation indicator
Two clamping nut
Toothed washer
M12 x 1
26.8 dia.
Operation indicator
Two clamping nut
M30 x 1.5
M30 x 1.5
Toothed washer
11
E2E 3-Wire DC
E2E 3-Wire DC
M8 Connector Models
(Shielded)
M8 Connector Models
(Unshielded)
Fig. 20:
E2E-X1R5Ej-M3/Fj-M3-N
Fig. 21:
E2E-X2MEj-M3/Fj-M3-N
39 (1.54)
31 (1.22)
26
39 (1.54)
31 (1.22)
26
15 dia. (0.59)
15 dia. (0.59)
M8 x 1
(1.02)
M8 x 1
(1.02)
6
(0.24)
Operation indicator
Two clamping nut
Operation indicator
Two clamping nut
M8 x 1
6.1 dia. M8 x 1
Toothed washer
Toothed washer
Mounting Holes
F
Dimensions
F (mm)
4 dia.
M5
5.5
5.4 dia.
M8
8.5
M12
M18
M30
+0.5
+0.5
+0.5
+0.5
+0.5
+0.5
+0.5
4.2
/ dia.
0
/ dia.
0
5.7
/ dia.
/ dia.
0
12.5
/ dia. 18.5
/ dia. 30.5
/ dia.
0
0
0
0
Connection
J PIN ARRANGEMENT
E2E-XjEj-M1
Connector Output configuration
Applicable models
Pin arrangement
M12 Micro NO
E2E-XjE1-M1-N
ChangeR
Load
Note: Terminal 2 is not used.
E2E-XjF1-M1-N
E2E-XjE2-M1-N
E2E-XjF2-M1-N
Load
Note: Terminal 2 is not used.
Load
NC
Note: Terminal 4 is not used.
Note: Terminal 4 is not used.
Load
(This table continues on the next page.)
12
E2E 3-Wire DC
E2E 3-Wire DC
Connector Output configuration
Applicable models
Pin arrangement
M8 Nano
NO
E2E-XjE1-M3-N
ChangeR
Note: Terminal 2 is not used.
Note: Terminal 2 is not used.
Load
E2E-XjF1-M3-N
E2E-XjE2-M3-N
E2E-XjF2-M3-N
Load
NC
Note: Terminal 4 is not used.
Note: Terminal 4 is not used.
Load
Load
Installation
J MOUNTING
Do not tighten the nut with excessive force. A washer must be used
with the nut.
Type
Part A
Part B
Length
Torque
Torque
M5
M8
1 N S m (10 kgf S cm)
9 N S m
12 N S m
Shielded
9 mm
3 mm
(90 kgf S cm) (120 kgf S cm)
Unshielded
M12
M18
M30
30 N S m (310 kgf S cm)
70 N S m (710 kgf S cm)
180 N S m (1,800 kgf S cm)
Shielded Model
Unshielded Model
Refer to the following to mount the E2E-CR8 and E2E-C1 non-
screw models.
8 to 21 mm
M3 hole
Part B Part A
Part B Part A
No screw is provided with
the E2E-CR8 or E2E-C1.
Note: The table above right shows the tightening torques for part
A and part B nuts. In the previous examples, the nut is on
the sensor head side (part B) and hence the tightening
torque for part B applies. If this nut is in part A, the tightening
torque for part A applies instead.
Tighten the screw to a torque of 0.20 N S m (2 kgf S cm) maximum to
secure the E2E-CR8 and a torque of 0.39 N S m (4 kgf S cm) maxi-
mum to secure the E2E-C1.
13
E2E 3-Wire DC
E2E 3-Wire DC
J EFFECTS OF SURROUNDING METAL
When mounting the E2E within a metal panel, ensure that the clearances given in the following table are maintained. Failure to maintain these
distances may cause deterioration in the performance of the sensor.
d dia.
Type
Dimension
4 mm dia. M5
5.4 mm
dia.
M8
M12
M18
M30
E2ECR8j
E2E-X1j
E2E-C1j
E2E-XjEj-N
E2E-XjFj-N
DC 3-wire
Shielded
ȏ
0 mm
0 mm
0 mm
0 mm
8 mm
0 mm
4.5 mm
12 mm
6 mm
24 mm
6 mm
8 mm
24 mm
0 mm
0 mm
0 mm
d
4 mm
5 mm
5.4 mm
12 mm
0 mm
18 mm
0 mm
30 mm
0 mm
D
m
n
0 mm
0 mm
0 mm
2.9 mm
3 mm
3 mm
8 mm
20 mm
27 mm
22 mm
55 mm
22 mm
40 mm
54 mm
40 mm
45 mm
30 mm
90 mm
30 mm
70 mm
90 mm
6 mm
8 mm
8 mm
18 mm
15 mm
40 mm
15 mm
20 mm
36 mm
Unshielded
ȏ
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
d
D
m
n
J MUTUAL INTERFERENCE
When installing two or more Sensors face to face or side by side, ensure that the minimum distances given in the following table are maintained.
B
A
Type
Dimension
4 mm
dia.
M5
5.4 mm M8
dia.
M12
M18
M30
E2ECR8j
E2E-X1j
E2E-C1j
E2E-XjEj-N
E2E-XjFj-N
DC 3-wire
Shielded
A
B
A
B
20 mm 20 mm 20 mm 20 mm 30 (20) mm
15 mm 15 mm 15 mm 15 mm 20 (12) mm
50 (30) mm
35 (18) mm
100 (50) mm
70 (35) mm
Unshielded
–
–
–
–
–
–
80 mm 120 (60) mm
60 mm 100 (50) mm
200 (100) mm 300 (100) mm
110 (60) mm 200 (100) mm
Note: The figures in parentheses refer to Sensors operating at different frequencies.
14
E2E 3-Wire DC
E2E 3-Wire DC
Precautions
Cable Tractive Force
Do not pull cable with the tractive forces exceeding the following.
J INSTALLATION
Power Reset Time
Diameter
Tractive force
30 N max.
The Proximity Sensor is ready to operate within 100 ms after power
is supplied. If power supplies are connected to the Proximity Sensor
and load respectively, be sure to supply power to the Proximity Sen-
sor before supplying power to the load.
4 mm dia. max.
4 mm dia. min.
50 N max.
Power OFF
J MOUNTING
The Proximity Sensor may output a pulse signal when it is turned off.
You must turn off the load before turning off the Proximity Sensor.
The Proximity Sensor must not be subjected to excessive shock
with a hammer when it is installed, or the Proximity Sensor may be
damaged or lose its water-resistance.
Power Supply Transformer
When using a DC power supply, make sure that the DC power sup-
ply has an insulated transformer. Do not use a DC power supply with
an auto-transformer.
J ENVIRONMENT
Sensing Object
Metal Coating
Water Resistance
Do not use the Proximity Sensor underwater, outdoors, or in the
rain.
The sensing distances of the Proximity Sensor vary with the metal
coating on sensing objects.
Operating Environment
Be sure to use the Proximity Sensor within its operating ambient
temperature range and do not use the Proximity Sensor outdoors so
that its reliability and life expectancy can be maintained. Although
the Proximity Sensor is water resistant, a cover to protect the Prox-
imity Sensor from water or water-soluble machining oil is recom-
mended so that its reliability and life expectancy can be maintained.
Do not use the Proximity Sensor in an environment with chemical
gas (e.g., strong alkaline or acid gasses including nitric, chromic,
and concentrated sulfuric acid gases).
J WIRING
High-tension Lines
Wiring through Metal Conduit
If there is a power or high-tension line near the cable of the Proximi-
ty Sensor, wire the cable through an independent metal conduit to
prevent against Proximity Sensor damage or malfunctioning.
NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.
R
OMRON ELECTRONICS, INC.
One East Commerce Drive
Schaumburg, IL 60173
OMRON CANADA, INC.
885 Milner Avenue
Scarborough, Ontario M1B 5V8
1-800-55-OMRON
416-286-6465
Cat. No. CEDSAX3
10/99
Specifications subject to change without notice.
Printed in U.S.A.
相关型号:
©2020 ICPDF网 联系我们和版权申明