CXONE-AL30D-V4-UP [OMRON]
Greater Integration with the CX-One;型号: | CXONE-AL30D-V4-UP |
厂家: | OMRON ELECTRONICS LLC |
描述: | Greater Integration with the CX-One |
文件: | 总5页 (文件大小:282K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
FA Integrated Tool Package CX-One
CX-One Ver.4
CSM_CX-One_DS_E_10_2
Greater Integration with the CX-One
• The CX-One is a comprehensive software package that
integrates PLC Programming Software with Support
Software for setting up Networks, Programmable
Terminals, Servo Systems, Inverters, and Temperature
Controllers.
Features
• Integrated Software Management for OMRON PLCs and Components
• CPU Bus Units and Special I/O Units can be set without concern for memory addresses and without relying on operation manuals
• Support Software for CPU Bus Units and Special I/O Units can be started from the I/O tables
• Integrated Simulation for Greater Design and Debugging Efficiency
• Online Web Services
Microsoft, Visual Basic, Visual C#, Visual Studio, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries.
DeviceNet, DeviceNet Safety, CompoNet, and EtherNet/IP are either registered trademarks or trademarks of ODVA.
Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.
1
CX-One Ver.4
Ordering Information
Product name
Specifications
Model
Standards
Number of licenses
− (Media only) *2
1 license
Media
CXONE-AL00D-V4
CXONE-AL01D-V4
CXONE-AL03D-V4
CXONE-AL10D-V4
CXONE-AL30D-V4
CXONE-AL50D-V4
The CX-One is a comprehensive software package that
integrates Support Software for OMRON PLCs and components.
3 licenses
CX-One runs on the following OS. *1
Windows XP (Service Pack 3 or higher, 32-bit version) /
Windows Vista (32-bit/64-bit version) /
Windows 7 (32-bit/64-bit version) / Windows 8 (32-bit/64-bit version) /
Windows 8.1 (32-bit/64-bit version) / Windows 10 (32-bit/64-bit
version)
10 licenses
DVD
−
30 licenses
50 licenses
Ask your OMRON
representative for
details.
FA Integrated Tool
Package CX-One
Ver.4.@
Unrestricted *3
(Site license)
1 license
3 licenses
10 licenses
30 licenses
50 licenses
CXONE-AL01D-V4-UP
CXONE-AL03D-V4-UP
CXONE-AL10D-V4-UP
CXONE-AL30D-V4-UP
CXONE-AL50D-V4-UP
The upgrade versions *4
DVD
−
Unrestricted *3
(Site license)
CXONE-ALXXD-V4-UP
CX-One Lite is a subset of the complete CX-One package that
provides only the Support Software required for micro PLC
applications.
FA Integrated Tool
Package
CX-One Lite
Ver.4.@
CX-One Lite runs on the following OS. *1
Windows XP (Service Pack 3 or higher, 32-bit version) /
Windows Vista (32-bit/64-bit version) /
Windows 7 (32-bit/64-bit version) / Windows 8 (32-bit/64-bit version) /
Windows 8.1 (32-bit/64-bit version) / Windows 10 (32-bit/64-bit
version)
1 license
DVD
DVD
CXONE-LT01D-V4
−
−
The upgrade versions *4
1 license
CXONE-LT01D-V4-UP
Note: The CX-One and CX-One Lite cannot be simultaneously installed on the same computer.
*1. The NX-IO Configurator runs on Windows 7 SP1, 8, 8.1, and 10.
It cannot be installed on Windows XP, Vista, and 7 without Service Pack.
*2. The CXONE-AL00D-V4 contains only the DVD installation media for users who have purchased the CX-One Version 4.@ and does not include
the license number. Enter the license number of the CX-One Version 4.@ when installing.
(The license number of the CX-One Version 3.@ or lower cannot be used for installation.)
*3. This is a site license for users who want to use CX-One on many computers.
•The number of users is unrestricted for the same company and site.
•Only one license number must be managed.
•All computers that use the site license can take advantage of automatic updates and software downloads.
*4. The upgrade versions are for customers that already have CX-One Version 3.@ or lower.
Product Configuration
Setup disk: (DVD) DVD 1 piece in the case
Guidance: A4 size, English/Japanese
Product Registration Guide, Japanese
User license agreement/User registration card,English/Japanese
2
CX-One Ver.4
Support Software
The following tables lists the Support Software that can be installed from CX-One
Support Software in CX-One
Outline
Application software to create and debug programs for CS/CJ/CP/NSJ-series, C-series, and CVM1/CV-series CPU
Units. Data can be created and monitored for high-speed-type Position Control Units.
CX-Programmer
Application software to build and set up FA networks, such as Controller Link, DeviceNet, CompoNet, CompoWay, and
Ethernet networks. The Routing Table Component and Data Link Component can be started from here. DeviceNet
Configuration functionality is also included.
CX-Integrator
Utility software that helps you to debug PLCs. It helps you to monitor the I/O status and to monitor/change present values
within the PLC you specify.
Switch Box Utility
CX-Protocol
Application software to create protocols (communications sequences) between CS/CJ/CP/NSJ-series or C200HX/HG/
HE Serial Communications Boards/Units and general-purpose external devices.
Application software to simulate CS/CJ/CP/NSJ-series CPU Unit operation on the computer to debug PLC programs
without a CPU Unit.
CX-Simulator
CX-Position
Application software to create and monitor data for CS/CJ-series Position Control Units (except for High-speed type).
Application software to monitor and set parameters for CS/CJ-series Position Control Units and Servo Drivers that
support MECHATROLINK-II communications.
CX-Motion-NCF
CX-Motion-MCH
CX-Motion
Application software to create data for CS/CJ-series MCH Units, create motion programs, and perform monitoring.
Application software to create data for CS/CJ-series, C200HX/HG/HE, and CVM1/CV-series Motion Control Units, and
to create and monitor motion control programs.
CX-Drive
Application software to set and control data for Inverters and Servos.
Application software to create and debug function block programs for CS/CJ-series Loop Controllers (Loop Control
Units/Boards, Process Control CPU Units, and Loop Control CPU Units).
CX-Process Tool
Application software that automatically outputs screen data as project files for NS-series PTs from tag information in
function block programs created with the CX-Process Tool.
Faceplate Auto-Builder for NS
CX-Designer
Application software to create screen data for NS-series PTs.
NV-Designer
Application software to create screen data for NV-series small PTs.
CX-ConfiguratorFDT
CX-Thermo
Application software for setting various units by installing its DTM module.
Application software to set and control parameters in components such as Temperature Control Units.
Application software for system setting and monitoring of CS/CJ-series Fl-net Units.
Application software to setup and monitor tag data Link for CJ2 (Built-in EtherNet/IP) CPU Units and EtherNet/IP Units.
CX-FLnet
Network Configurator
Application software to set up and maintain EtherNet/IP Coupler Units and NX-series I/O Units on an EtherNet/IP
Coupler Unit.
NX-IO Configurator
Middleware necessary for CX-One applications to communicate with OMRON components, such as PLCs, Display
Devices, and Temperature Control Units.
CX-Server
Communications Middleware
Middleware necessary to communicate with CP1L CPU Unit with built-in Ethernet port.
A group of components used with CX-One applications, such as the CX-Programmer and CX-Integrator. Includes the
following: I/O tables, PLC memory, PLC Setup, Data Tracing/Time Chart Monitoring, PLC Error Logs, File Memory, PLC
clock, Routing Tables, and Data Link Tables.
PLC Tools
3
CX-One Ver.4
System Requirements
Item
Requirement
Operating system (OS)
(See note 1, 2.)
Windows XP (Service Pack 3 or higher, 32-bit version) / Windows Vista (32-bit/64-bit version) / Windows 7 (32-bit/64-bit version) /
Windows 8 (32-bit/64-bit version) / Windows 8.1 (32-bit/64-bit version) / Windows 10 (32-bit/64-bit version)
CPU
A processor recommended by Microsoft
Memory (See note 3.)
Hard disk
A memory recommended by Microsoft
Approx. 4.0 GB or more available space is required to install the complete CX-One package.
XGA (1,024 × 768), High-Color 16-bit min.
Display
Disk drive
DVD-ROM drive
Communications ports
Other
RS-232C port, USB port, or Ethernet port (see note 4.)
Internet access is required for online user registration, including a modem or other hardware connection method.
Note: 1. CX-One Operating System Precaution
1) System requirements and hard disk space may vary with the system environment.
2) Except for Windows XP 64-bit version.
2. The following restrictions apply when CX-One is used with Microsoft Windows Vista / Windows 7 / Windows 8 / Windows 8.1 / Windows 10.
The following restrictions apply to some application operations.
Application
CX-Designer/
Restriction
If a new Windows Vista / Windows 7 / Windows 8 / Windows 8.1 / Windows 10 font (e.g., Meiryo) is used in a project, the
font size on labels may be bigger and protrude from the components if the project is transferred from CX-Designer running
on a Windows XP or earlier OS to the NS/NSJ.
NV-Designer
Although you can install CPS files, EDS files, Expansion Modules, and Interface Modules, the virtual store function of
Windows Vista / Windows 7 / Windows 8 / Windows 8.1 / Windows 10 imposes the following restrictions on the use of the
software after installation. These restrictions will not exist if application data is installed using Run as Administrator.
• If another user logs in, the applications data will need to be installed again.
CX-Programmer/
CX-Integrator/
Network Configurator
• The CPS files will not be automatically updated.
Restrictions are imposed on the following functions.
• The driver cannot be changed from the default setting if Controller Link is set as the network type in the Change PLC
dialog box.
CX-Server
• Online connections will not be possible through Controller Link Boards or SYSMAC LINK Boards.
Online connections using FinsGateway as the network type will not be possible from the CX-Programmer or CX-Integrator.
• Communications will not be possible though a CS1 Board and PCI bus.
•
3. The amount of memory required varies with the Support Software used in CX-One for the following Support Software. Refer to user
documentation for individual Support Software for details.
CX-Programmer, CX-Designer, CX-Thermo, CX-Simulator, CX-Protocol, CX-Motion, CX-Drive, CX-Process Tool, and Faceplate Auto-
Builder for NS
4. Refer to the hardware manual for your PLC for hardware connection methods and cables to connect the computer and PLC.
Hard Disk Space Requirements
Support Software in CX-One
CX-Programmer
Approx. hard disk space required.
Approx. 330 MB
Remarks
CX-Position
Approx. 15 MB
Approx. 45 MB
Approx. 260 MB
Approx. 60 MB
Approx. 200 MB
Approx. 110 MB
Approx. 100 MB
Approx. 70 MB
Approx. 45 MB
Approx. 200 MB
Approx. 2 MB
CX-Motoion
CX-Motion-NCF
CX-Motion-MCH
CX-Drive
NV-Designer
Options can be selected or cleared to install or not
install individual Support Sofftware.
CX-Process Tool
Faceplate Auto-Builder for NS
CX-Simulator
CX-Thermo
CX-Flnet
Switch Box Utility
NX-IO Configurator
CX-Integrator
Approx. 5 MB
Approx. 100 MB
Approx. 260 MB
Approx. 750 MB
Approx. 20 MB
Approx. 20 MB
Approx. 40 MB
Approx. 700 MB
CX-Designer
CX-Protocol
Always installed. *
Network Configurator
CX-ConfiguratorFDT
CX-Server and PLC Tools
* The CX-Server (communications middleware) and PLC Tools (common components) are installed on the system drive.
Note: If the complete CX-One package is installed, approximately 4.0 GB of hard disk space will be required (including workspace required for
installation). Check available space on your hard disk before installing software.
Related Manuals
Cat. No.
Model
Manual name
Contents
W463
CXONE-AL@@D-V4
CX-One Setup Manual
Installation and overview of CX-One FA Integrated Tool Package.
4
Terms and Conditions Agreement
Read and understand this catalog.
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you
have any questions or comments.
Warranties.
(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship
for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron
disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER
ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the
Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at
Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount
equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty,
repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products
were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate
modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall
not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or
electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice,
recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above
warranty.
See http://www.omron.com/global/ or contact your Omron representative for published information.
Limitation on Liability; Etc.
OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.
Suitability of Use.
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself
is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine,
system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product
with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE
QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,
AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Programmable Products.
Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence
thereof.
Performance Data.
Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining
suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate
it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.
Change in Specifications.
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our
practice to change part numbers when published ratings or features are changed, or when significant construction changes are
made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers
may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at
any time to confirm actual specifications of purchased Product.
Errors and Omissions.
Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
2018.9
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2018 All Right Reserved.
相关型号:
©2020 ICPDF网 联系我们和版权申明