A165E-01L [OMRON]
Separate Construction with Smallest Class of Depth in the World;
| 型号： | A165E-01L |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | Separate Construction with Smallest Class of Depth in the World |
| 文件： | 总12页 (文件大小：1939K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Emergency Stop Switch (16-dia.)
A165E
C64I-E-01
Separate Construction with Smallest
Class of Depth in the World
• Direct opening mechanism to open contacts in emergencies,
such as when they are welded.
• Conforms to EN 60947-5-5.
• Includes a safety lock to prevent misuse.
• Features separate construction that allows the Switch to be
separated for easier wiring and one-piece construction that
allows easier handling.
• Models available with 3 contacts built into a single block
(A165E-U).
Be sure to read the “Safety Precautions” on page 9.
Model Number Structure
List of Models
Diameter of
Operation Unit
Function
Model
Shape
Separate
construction
A165E
(30-mm model)
(30-mm model)
30-mm models
40-mm models
Push-Lock,
turn-reset
One-piece
construction
A165E-@-03U
Model Number Legend (Completely Assembled).........................Shipped as a set that includes the Operation Unit
and light source.
24D
LS
02
IP65 (Oil-resistant)
3. Contacts
Code Description
1. Operation Unit Shape and Functions
Code
Functions
Non-lighted
Pushbutton
01
02
SPST-NC
DPST-NC
S
30 dia.
LS
Lighted
Push-lock,
turn-reset
03U TPST-NC *
Non-lighted
Lighted
M
40 dia.
LM
* TPST-NC models have
one-piece construction with
the contact unit. Only
non-lighted models are
available.
2. Light Source
Operation Rated
Code
Type
Non-lighted ---
voltage
voltage
---
None
24D LED
24 VAC/
VDC 5ꢀ VDC
24 VAC/
Note: Models with separate construction
(SPST-NC and DPST-NC) are for
normal loads only. One-piece models
(TPST-NC) are for either normal loads
or microloads.
1
A165E
Ordering Information
List of Sets
Illumination
Rated voltage
Pushbutton color Pushbutton size
Terminal
Contact form
SPST-NC
DPST-NC
SPST-NC
DPST-NC
SPST-NC
DPST-NC
SPST-NC
DPST-NC
Model
A165E-LS-24D-01
A165E-LS-24D-02
A165E-S-01
LED
24 VAC/VDC
30 dia.
Non-lighted
LED
---
A165E-S-02
A165E-LM-24D-01
A165E-LM-24D-02
A165E-M-01
24 VAC/VDC
Red
Solder terminal
40 dia.
Non-lighted
Non-lighted
---
---
A165E-M-02
30 dia.
40 dia.
A165E-S-03U
A165E-M-03U
TPST-NC
List of Sets (in Different Colors)
Illumination
Pushbutton color *
Pushbutton size
Terminal
Contact form
Model
Yellow
A165E-SY-01
SPST-NC
Gray
A165E-SGR-01
A165E-SY-02
Yellow
Gray
Non-lighted
30 dia.
Solder terminal
DPST-NC
TPST-NC
A165E-SGR-02
A165E-SY-03U
A165E-SGR-03U
Yellow
Gray
* Models with yellow or gray pushbutton colors cannot be used as emergency switches.
Individual Parts (for Switches with Separate Construction)
Operation Units
Switches
Appearance
Illumination
Model
Contact
Appearance
Illumination
Model
form
30
Non-lighted
A165E-S
dia.
SPST-NC A165E-01
DPST-NC A165E-02
SPST-NC A165E-01L
DPST-NC A165E-02L
Non-lighted
Lighted
A165E-LS
A165E-M
A165E-LM
40 dia.
Non-lighted
Lighted
Lighted
Switch Units
Lamps
Contact
Model
form
Appearance
Illumination
Rated
voltage
Appearance
LED color
Model
SPST-NC A165E-R-24D-01
DPST-NC A165E-R-24D-02
5 VDC
A16-5DSR
Lighted
Red Bright
12 VAC/VDC A16-12DSR
24 VAC/VDC A16-24DSR
2
A165E
Accessories (Order Separately)
Item
Appearance
Type
Model
Precautions
Use this as an emergency stop
nameplate.
Yellow Plate
Yellow, 45 dia.
A16Z-5070
Used for covering the panel cutouts
for future panel expansion.
Degree of protection: IP40
Color: Black
Panel Plug
Tightening Tool
Extractor
Round
---
A16ZT-3003
A16Z-3004
A16Z-5080
Useful for repetitive mounting. Be
careful not to tighten excessively.
Convenient for extracting the Switch
and Lamp.
Specifications
Certified Standard Ratings
Certified Standards
UL508, CSA C22.2 No.14, CCC(GB14048.5)
Certification
Standards
File No.
body
Models with Separate Construction
UL508,
CSA C22.2 No.14
Rated voltage
125 VAC
250 VAC
30 VDC
Resistive load
UL *
E41515
5 A
3 A
3 A
EN60947-5-1 (certified Consult your OMRON
direct opening),
EN60947-5-5
TÜV SÜD
representative for
details.
Models with One-piece Construction
CQC (CCC)
GB14048.5
2003010303070678
* Certification for CSA C22.2 No. 14 has been obtained. Separate
Rated voltage
125 VAC
250 VAC
30 VDC
Resistive load
Resistive load
construction models have been certified for the Switch Unit.
1 A
0.5 A
1 A
Switch Ratings
Models with Separate Construction
TÜV(EN60947-5-1)
Models with Separate Construction
Rated voltage
Resistive load
125 VAC
250 VAC
30 VDC
5 A
3 A
3 A
Rated voltage
250 VAC
30 VDC
3 A
3 A
Note: Minimum applicable load: 5 VDC, 150 mA
Models with One-piece Construction
Models with One-piece Construction
Rated voltage
250 VAC
30 VDC
Resistive load
Rated voltage
Resistive load
0.5 A
1 A
125 VAC
250 VAC
30 VDC
1 A
0.5 A
1 A
Note: Minimum applicable load: 5 VDC, 1 mA
LED Ratings
(Only for Models with LEDs)
Rated voltage
Rated current
8 mA
Operation voltage
24 VAC/VDC
24 VAC/VDC 5ꢀ
3
A165E
Characteristics
Type
Emergency Stop Switch
Non-lighted,
One-piece construction
A165E-U
Non-lighted
A165E-S/A165E-M
Lighted
A165E-LS/A165-LM
Item
Mechanical
20 operations/minute max.
10 operations/minute max.
100 MΩ min. (at 500 VDC)
Allowableoperating
frequency
Electrical
Insulation resistance
Between terminals of same polarity 1,000 VAC, 50/60 Hz for 1 min
Between terminals of different
2,000 VAC 50/60 Hz for 1 min
polarity
Dielectric strength
Between each terminal and ground 2,000 VAC 50/60 Hz for 1 min
Between lamp terminals
1,000 VAC, 50/60 Hz for 1 min *1
---
Vibration resistance Malfunction
Destruction
10 to 55 Hz, 1.5-mm double amplitude (malfunction within 1 ms)
500 m/s2
300 m/s2 max.
(malfunction within 1 ms)
150 m/s2 max.
(malfunction within 1 ms)
Shock resistance
Malfunction
Mechanical
Durability
100,000 operations min.
100,000 operations min.
IP65 Oil-resistant *2
Class II
Electrical
Degree of protection
IP65 *2
IP65 Oil-resistant *2
Electric shock protection class
PTI (tracking characteristic)
Degree of contamination
Weight
175
3 (EN60947-5-1)
Approx. 16 g (in case of DPST-NC Switches)
−10 to 55°C (with no icing or condensation)
35% to 85%
Ambient operating temperature
Ambient operating humidity
Ambient storage temperature
−25 to 65°C (with no icing or condensation)
*1. LED not mounted. (Test them with the LED removed.)
*2. Degree of protection from the front of the panel.
Operating Characteristics
Type
Characteristics of models
with separate construction
Characteristics of models
with one-piece construction
Item
Operating force OF max.
Releasing force RF min.
14.7 N
14.7 N
0.1 N·m
0.1 N·m
Pretravel
PT
3.5±0.5 mm
3±0.5 mm
Structure and Nomenclature
Operation Unit
Color
Operation Unit Color
• Models with LED illumination: Red
Operation Unit
• Non-lighted models * : Red, yellow, or gray
Degree of Protection
IP65 oil resistance
Switch
Switch Holder
Specifications
For standard load
125 VAC, 5 A
250 VAC, 3 A
30 VDC, 3 A
(The above figure is example of the
separate construction model.)
* Models with yellow or gray pushbutton colors cannot be used as emergency switches.
4
A165E
Dimensions
(Unit: mm)
A165E-S
Non-lighted models
30 mm diameter
Panel cutout
dimensions
30 dia.
Mounting ring
M16 × 1
3+0.1 dia.
0
16+0.2 dia.
Lock ring
Lock
0
Packing (t=0.5)
1.4
2.6
· When applying a coating such as
paint to the panel, dimensions
after the coating must satisfy the
specified dimensions.
· Recommended panel thickness:
0.5 to 3.2 mm.
10.8
5
22.0 0.8
28.5 0.8
20 0.8
A165E-LS
Lighted models
30 mm diameter
Panel cutout
dimensions
30 dia.
Mounting ring
M16 × 1
3+0.1 dia.
0
16+0.2 dia.
Lock ring
Lock
0
Packing (t=0.5)
1.4
2.6
· When applying a coating such as
paint to the panel, dimensions
after the coating must satisfy the
specified dimensions.
· Recommended panel thickness:
0.5 to 3.2 mm.
10.8 0.5
22.1 0.8
28.5 0.8
20 0.8
A165E-S-03U
Panel cutout
dimensions
21.5 0.5
1
Non-lighted,
One-piece construction models
30 mm diameter
30 dia.
3+0.1 dia.
M16 × 1
0
16+0.2 dia.
0
Lock
20.5 0.8
28.5 0.8
Packing (t=0.5)
Lock ring
· When applying a coating such as
paint to the panel, dimensions
after the coating must satisfy the
specified dimensions.
· Recommended panel thickness:
0.5 to 3.2 mm.
Mounting ring
5
A165E
A165E-M
Non-lighted models
40 mm diameter
40 dia.
Panel cutout
dimensions
Mounting ring
M16 × 1 Switch
3+0.1 dia.
0
16+0.2 dia.
0
Lock ring
Lock
Packing (t=0.5)
1.4
2.6
· When applying a coating such as
paint to the panel, dimensions
after the coating must satisfy the
specified dimensions.
· Recommended panel thickness:
0.5 to 3.2 mm.
10.8 0.5
21.1 0.8
28.5 0.8
20 0.8
A165E-LM
Lighted models
40 mm diameter
40 dia.
Panel cutout
dimensions
Mounting ring
3+0.1 dia.
M16 × 1 Switch
0
16+0.2 dia.
0
Lock ring
Lock
Packing (t=0.5)
· When applying a coating such as
paint to the panel, dimensions
after the coating must satisfy the
specified dimensions.
· Recommended panel thickness:
0.5 to 3.2 mm.
10.8 0.5
22.1 0.8
20 0.8
28.5 0.8
A165E-M-03U
One-piece construction models
40 mm diameter
Panel cutout
dimensions
40 dia.
21.5 0.5
1
3+0.1 dia.
M16 × 1
0
16+0.2 dia.
0
Lock
20.5 0.8
28.5 0.8
Packing (t=0.5)
Lock ring
· When applying a coating such as
paint to the panel, dimensions
after the coating must satisfy the
specified dimensions.
· Recommended panel thickness:
0.5 to 3.2 mm.
Mounting ring
6
A165E
Accessories
Yellow Plate (Vinyl Chloride)
A16Z-5070
Panel Plugs (Round Type)
A16ZT-3003
18 dia.
• Select an appropriate Panel Plug according to the panel design and
mount from the front side of the panel. Panel cutout dimensions are
the same as those for the Operation Unit.
15.6 dia.
t=1
45 dia.
Tightening Tool
A16Z-3004
Lock Ring
Rough surface
15.8 0.1 dia.
Rough
surface
18 dia.
0
15 dia.−0.1
Terminal Arrangement
SPST Switches
DPST Switches
TPST Switches
NC2
L−
L−
L+
NC1
NC1
NC2
NC1
NC1
NC1
SW1
NC2
SW2
L+
Stopper
NC3
SW1
Note: The L+ and L− terminals are not available with the non-lighted models.
7
A165E
Installation
Mounting to the Panel (Models with Separate Construction)
After installing the Operation Unit, snap in the Switch from the back of the panel.
(1) Installing the Operation Unit
• Attach rubber packing or the
Yellow Plate onto the Operation
Unit from its terminal side. Insert
the Operation Unit into the panel
from the front. Install the lock ring
and mounting nut from the
Panel
terminal side and tighten.
• Adjust the slits on the hole of
rubber packing and Yellow Plate
Mounting nut
Lock
to the protruding part of the Unit.
• Rubber packing is not necessary
Rubber packing
when the Yellow Plate is used.
• Tighten the nut to the torque of
0.29 to 0.49 N·m.
Cutout
(included with the
product) or Yellow
Plate (sold separately)
• The Operation Unit should be
installed with its
Lock ring (included
with the product)
protruding part adjusted to the slit
of the panel hole.
• Align the lock ring to the groove of
the Operation Unit so that the
edge is drawn to the panel side.
Edge
Panel
Lock hole
Lock ring (included
with the product)
Mounting nut (included
with the product)
Rubber packing (included with the product)
or Yellow Plate (sold separately)
(2) Mounting the Switch
(3) Removing the Switch
• Snap on the Switch to the Operation Unit.
• Insert the prongs of the A16Z-5080 Extractor between the Switch and the
Operation Unit, grip the Switch, and pull to remove.
• Make sure that the Switch has the correct orientation when snapping it onto the
Operation Unit.
• Align the white dot on the Operation Unit with the guide groove on the side of
the Switch marked with an “L” as shown below, and push the Switch into the
Operation Unit until it clicks into place. Confirm that the Switch is securely in
place before using.
Guide groove
White dot
Extractor (A16Z-5080)
L marking
(4) Installing the LED Lamp
• When mounting the Lamp, make sure it is facing the direction shown in the
following diagram. Insert the Lamp while matching the protruding part of the
Lamp and the small guides on the outer surface of the switch.
Narrow guide
Protruding part
Wide guide
8
A165E
Safety Precautions
Be sure to read the precautions for all A165E models in the website at: http://www.ia.omron.com/.
Indication and Meaning for Safe Use
Using the Microload
• Insert a contact protection circuit, if necessary, to prevent the
reduction of life expectancy due to extreme wear on the contacts
caused by loads where inrush current occurs when the contact is
opened and closed.
Indicates a potentially hazardous situation
which, if not avoided, may result in minor
or moderate injury or in property damage.
CAUTION
• The A165E-@U (one-piece construction) allows both a standard
load (125 V at 1 A, 250 V at 0.5 A) and a microload. If a standard
load is applied, however, the microload area cannot be used. If the
microload area is used with a standard load, the contact surface
will become rough, and the opening and closing of the contact for
a microload may become unreliable.
Precautions
for Safe Use
Supplementary comments on what to do
or avoid doing, to use the product safely.
!CAUTION
If the Operation Unit is separated from the Switch Unit, the
equipment will not stop, creating a hazardous condition.
Always confirm that safety functions are operating before
starting operation.
• The minimum applicable load is the N-level reference value. This
value indicates the malfunction reference level for the reliability
level of 60% (λ 60) (conforming to JIS C5003).
• The equation, λ 60 = 0.5 x 10−6/time indicates that the estimated
malfunction rate is less than 1/2,000,000 with a reliability level of
60%.
Precautions for Correct Use
Mounting
0.15 mA
• Always make sure that the power is turned OFF before mounting,
removing, or wiring the Switch, or performing maintenance.
Electrical shock or fire may result if the power is not turned OFF.
• The tightening torque is 0.29 to 0.49 N·m.
Area of use
Wiring
• Be sure to use electrical wires that are a size appropriate for the
applied voltage and carry current. Perform soldering according to
the conditions given below. If the soldering is not properly
performed, abnormal heating may result, possibly resulting in fire.
1. Hand soldering: 30 W, within 5 s
Invalid
area
1 mA
2. Dip soldering: 240°C, within 3 s
Current (mA)
Wait for one minute after soldering before exerting any external
force on the solder.
• Use non-corrosive resin fluid as the flux.
• Make sure that the electric cord is wired so that it does not touch
the Unit. If the electric cord will touch the Unit, then electric wires
with a heat resistance of 100°C min. must be used.
• After wiring the Switch, maintain an appropriate clearance and
creepage distance.
LEDs
The LED current-limiting resistor is built-in, so external resistance is
not required.
Rated voltage
24 VAC/VDC
Internal limiting resistor
2.4 kΩ
Operating Torque
• Do not exceed an operating torque of 0.49 N·m in the direction of
rotation.
• Do not pull the operating button or apply excessive force to any
side of the button.
Otherwise it may be damaged.
Operating Environment
• The IP65 model is designed with a degree of protection so that it
will not sustain damage if it is subjected to water from any direction
to the front of the panel.
• The Switch is intended for indoor use only. Using the Switch
outdoor may cause it to fail.
9
A165E
Others
• The oil-resistant IP65 uses NBR rubber and is resistant to general
cutting oil and cooling oil. Some special oils cannot be used with
the oil-resistant IP65, however, so contact your OMRON
representative for details.
• If the panel is to be coated, make sure that the panel meets the
specified dimensions after coating.
• Due to the structure of the Switch, severe shock or vibration may
cause malfunctions or damage to the Switch.
Also, most Switches are made from resin and will be damaged if
they come into contact with sharp objects. Particularly scratches
on the Operation Unit may create visual and operational obtrusions.
Handle the Switches with care, and do not throw or drop them.
Do not allow the
Switch to drop and hit
the floor.
Do not place or drop
heavy objects on the
Switch.
Do not operate the
Switch with hard or
sharp objects.
Hammer
Screwdriver
10
Terms and Conditions of Sale
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed
part of all quotes, agreements, purchase orders, acknowledgments, price lists,
catalogs, manuals, brochures and other documents, whether electronic or in
writing, relating to the sale of products or services (collectively, the "Products")
by Omron Electronics LLC and its subsidiary companies (“Omron”). Omron
objects to any terms or conditions proposed in Buyer’s purchase order or other
documents which are inconsistent with, or in addition to, these Terms.
2. Prices; Payment Terms. All prices stated are current, subject to change with-
out notice by Omron. Omron reserves the right to increase or decrease prices
on any unshipped portions of outstanding orders. Payments for Products are
due net 30 days unless otherwise stated in the invoice.
ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. Omron further disclaims all warranties and responsibility of
any type for claims or expenses based on infringement by the Products or oth-
erwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obli-
gation hereunder shall be, at Omron’s election, to (i) replace (in the form
originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying
Product, or (iii) repay or credit Buyer an amount equal to the purchase price of
the non-complying Product; provided that in no event shall Omron be responsi-
ble for warranty, repair, indemnity or any other claims or expenses regarding
the Products unless Omron’s analysis confirms that the Products were prop-
erly handled, stored, installed and maintained and not subject to contamina-
tion, abuse, misuse or inappropriate modification. Return of any Products by
Buyer must be approved in writing by Omron before shipment. Omron Compa-
nies shall not be liable for the suitability or unsuitability or the results from the
use of Products in combination with any electrical or electronic components,
circuits, system assemblies or any other materials or substances or environ-
ments. Any advice, recommendations or information given orally or in writing,
are not to be construed as an amendment or addition to the above warranty.
See http://www.omron247.com or contact your Omron representative for pub-
lished information.
3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices
sent to Buyer after deducting transportation charges, taxes and duties, and will
be allowed only if (i) the invoice is paid according to Omron’s payment terms
and (ii) Buyer has no past due amounts.
4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or
the maximum legal rate, whichever is less, on any balance not paid within the
stated terms.
5. Orders. Omron will accept no order less than $200 net billing.
6. Governmental Approvals. Buyer shall be responsible for, and shall bear all
costs involved in, obtaining any government approvals required for the impor-
tation or sale of the Products.
7. Taxes. All taxes, duties and other governmental charges (other than general
real property and income taxes), including any interest or penalties thereon, 14. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE
imposed directly or indirectly on Omron or required to be collected directly or
indirectly by Omron for the manufacture, production, sale, delivery, importa-
tion, consumption or use of the Products sold hereunder (including customs
duties and sales, excise, use, turnover and license taxes) shall be charged to
and remitted by Buyer to Omron.
FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY
WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS
BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual
price of the Product on which liability is asserted.
8. Financial. If the financial position of Buyer at any time becomes unsatisfactory
to Omron, Omron reserves the right to stop shipments or require satisfactory 15. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and
security or payment in advance. If Buyer fails to make payment or otherwise
comply with these Terms or any related agreement, Omron may (without liabil-
ity and in addition to other remedies) cancel any unshipped portion of Prod-
ucts sold hereunder and stop any Products in transit until Buyer pays all
amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all
unpaid accounts.
their employees from and against all liabilities, losses, claims, costs and
expenses (including attorney's fees and expenses) related to any claim, inves-
tigation, litigation or proceeding (whether or not Omron is a party) which arises
or is alleged to arise from Buyer's acts or omissions under these Terms or in
any way with respect to the Products. Without limiting the foregoing, Buyer (at
its own expense) shall indemnify and hold harmless Omron and defend or set-
tle any action brought against such Companies to the extent based on a claim
that any Product made to Buyer specifications infringed intellectual property
rights of another party.
9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation
unless Buyer indemnifies Omron against all related costs or expenses.
10. Force Majeure. Omron shall not be liable for any delay or failure in delivery 16. Property; Confidentiality. Any intellectual property in the Products is the exclu-
resulting from causes beyond its control, including earthquakes, fires, floods,
strikes or other labor disputes, shortage of labor or materials, accidents to
machinery, acts of sabotage, riots, delay in or lack of transportation or the
requirements of any government authority.
sive property of Omron Companies and Buyer shall not attempt to duplicate it
in any way without the written permission of Omron. Notwithstanding any
charges to Buyer for engineering or tooling, all engineering and tooling shall
remain the exclusive property of Omron. All information and materials supplied
by Omron to Buyer relating to the Products are confidential and proprietary,
and Buyer shall limit distribution thereof to its trusted employees and strictly
prevent disclosure to any third party.
11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron:
a.Shipments shall be by a carrier selected by Omron; Omron will not drop ship
except in “break down” situations.
b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall 17. Export Controls. Buyer shall comply with all applicable laws, regulations and
constitute delivery to Buyer;
licenses regarding (i) export of products or information; (iii) sale of products to
“forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of
regulated technology or information.
c. All sales and shipments of Products shall be FOB shipping point (unless oth-
erwise stated in writing by Omron), at which point title and risk of loss shall
pass from Omron to Buyer; provided that Omron shall retain a security inter- 18. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right
est in the Products until the full purchase price is paid;
d.Delivery and shipping dates are estimates only; and
e.Omron will package Products as it deems proper for protection against nor-
mal handling and extra charges apply to special conditions.
and no course of dealing between Buyer and Omron shall operate as a waiver
of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder
without Omron's written consent. (c) Law. These Terms are governed by the
law of the jurisdiction of the home office of the Omron company from which
Buyer is purchasing the Products (without regard to conflict of law princi-
ples). (d) Amendment. These Terms constitute the entire agreement between
Buyer and Omron relating to the Products, and no provision may be changed
or waived unless in writing signed by the parties. (e) Severability. If any provi-
sion hereof is rendered ineffective or invalid, such provision shall not invalidate
any other provision. (f) Setoff. Buyer shall have no right to set off any amounts
against the amount owing in respect of this invoice. (g) Definitions. As used
herein, “including” means “including without limitation”; and “Omron Compa-
nies” (or similar words) mean Omron Corporation and any direct or indirect
subsidiary or affiliate thereof.
12. Claims. Any claim by Buyer against Omron for shortage or damage to the
Products occurring before delivery to the carrier must be presented in writing
to Omron within 30 days of receipt of shipment and include the original trans-
portation bill signed by the carrier noting that the carrier received the Products
from Omron in the condition claimed.
13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the
Products will be free from defects in materials and workmanship for a period of
twelve months from the date of sale by Omron (or such other period expressed
in writing by Omron). Omron disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION,
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-
Certain Precautions on Specifications and Use
1. Suitability of Use. Omron Companies shall not be responsible for conformity
with any standards, codes or regulations which apply to the combination of the
Product in the Buyer’s application or use of the Product. At Buyer’s request,
ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROP-
ERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Omron will provide applicable third party certification documents identifying 2. Programmable Products. Omron Companies shall not be responsible for the
ratings and limitations of use which apply to the Product. This information by
itself is not sufficient for a complete determination of the suitability of the Prod- 3. Performance Data. Data presented in Omron Company websites, catalogs
user’s programming of a programmable Product, or any consequence thereof.
uct in combination with the end product, machine, system, or other application
or use. Buyer shall be solely responsible for determining appropriateness of
the particular Product with respect to Buyer’s application, product or system.
Buyer shall take application responsibility in all cases but the following is a
non-exhaustive list of applications for which particular attention must be given:
and other materials is provided as a guide for the user in determining suitabil-
ity and does not constitute a warranty. It may represent the result of Omron’s
test conditions, and the user must correlate it to actual application require-
ments. Actual performance is subject to the Omron’s Warranty and Limitations
of Liability.
(i) Outdoor use, uses involving potential chemical contamination or electrical 4. Change in Specifications. Product specifications and accessories may be
interference, or conditions or uses not described in this document.
(ii) Use in consumer products or any use in significant quantities.
(iii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety equip-
ment, and installations subject to separate industry or government regulations.
(iv) Systems, machines and equipment that could present a risk to life or prop-
erty. Please know and observe all prohibitions of use applicable to this Prod-
uct.
changed at any time based on improvements and other reasons. It is our prac-
tice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifica-
tions of the Product may be changed without any notice. When in doubt, spe-
cial part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Omron’s representative at any time
to confirm actual specifications of purchased Product.
5. Errors and Omissions. Information presented by Omron Companies has been
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors or omissions.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT
ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO
OMRON AUTOMATION AND SAFETY • THE AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com
OMRON CANADA, INC. • HEAD OFFICE
OMRON ARGENTINA • SALES OFFICE
Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com
Cono Sur • 54.11.4783.5300
OMRON ELECTRONICS DE MEXICO • HEAD OFFICE
OMRON CHILE • SALES OFFICE
México DF • 52.55.59.01.43.00 • 01-800-226-6766 • mela@omron.com
Santiago • 56.9.9917.3920
OMRON ELECTRONICS DE MEXICO • SALES OFFICE
OTHER OMRON LATIN AMERICA SALES
Apodaca, N.L. • 52.81.11.56.99.20 • 01-800-226-6766 • mela@omron.com
54.11.4783.5300
OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE
São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br
OMRON EUROPE B.V. • Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. • +31 (0) 23 568 13 00 • www.industrial.omron.eu
Authorized Distributor:
Automation Control Systems
• Machine Automation Controllers (MAC) • Programmable Controllers (PLC)
• Operator interfaces (HMI) • Distributed I/O • Software
Drives & Motion Controls
• Servo & AC Drives • Motion Controllers & Encoders
Temperature & Process Controllers
• Single and Multi-loop Controllers
Sensors & Vision
• Proximity Sensors • Photoelectric Sensors • Fiber-Optic Sensors
• Amplified Photomicrosensors • Measurement Sensors
• Ultrasonic Sensors • Vision Sensors
Industrial Components
• RFID/Code Readers • Relays • Pushbuttons & Indicators
• Limit and Basic Switches • Timers • Counters • Metering Devices
• Power Supplies
Safety
• Laser Scanners • Safety Mats • Edges and Bumpers • Programmable Safety
Controllers • Light Curtains • Safety Relays • Safety Interlock Switches
$64I-E-01 0 /14
Note: Specifications are subject to change.
Printed on recycled paper.
© 2014 Omron Electronics LLC
Printed in U.S.A.
相关型号：
©2020 ICPDF网 联系我们和版权申明