A16-AGM-2P [OMRON]
Pushbutton Switch;型号: | A16-AGM-2P |
厂家: | OMRON ELECTRONICS LLC |
描述: | Pushbutton Switch 开关 |
文件: | 总4页 (文件大小:483K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
A16□-P
Pushbutton Switch (Detachable) (Lighted/Non-Lighted) (Cylindrical 16-dia.)
CSM_A16_-P_DS_J_1_3
PCB Terminal Models
● Lever made of high heat resistant resin allowing automatic
soldering.
● Easy Panel and PCB mounting.
● Lever for easily mounting and removing the Socket Unit.
● The hold status can easily be checked from the rear of the
PCB.
● Short profile width of the separable type reduced to
28.3 mm.
A
1
Panel width can also be reduced.
6
@
RoHS Compliant
P
Refer to Safety Precautions for All Pushbutton Switches and
Safety Precautions on page 24.
List of Models
■Ordering as a Set......... The model numbers used to order sets of Units are given in the following tables. One set comprises the
Pushbutton, Lamp (lighted models only), Case, and Switch.
Models with PCB Terminals IP40
Item
Minimum
packing unit
Momentary operation (Self-resetting) *1
Pushbutton color symbol
Output
SPDT
Lighting
LED
Operating voltage
5 VDC
A16L-Δ@M-5D-1P
A16L-Δ@M-12D-1P
A16L-Δ@M-24D-1P
A16-Δ@M-1P
12 VAC/VDC
24 VAC/VDC
R: red
Y: yellow
PY: pure yellow
G: green
A: blue
W: white
B: black *2
Non-lighted
5 pcs
5 VDC
A16L-Δ@M-5D-2P
A16L-Δ@M-12D-2P
A16L-Δ@M-24D-2P
A16-Δ@M-2P
LED
12 VAC/VDC
24 VAC/VDC
DPDT
Non-lighted
Note: Contact your OMRON representative about Selector Switches and Key Selector Switches.
*1. Enter the desired shape for the Pushbutton in Δ: J (rectangular), A (square), or T (round). Enter the desired color symbol for the Pushbutton in the @.
*2. Black (“B”) Pushbuttons are only available for non-lighted models.
Models with PCB Terminals IP65
Item
Minimum
packing unit
Momentary operation (Self-resetting) *1
Pushbutton color symbol
Output
SPDT
Lighting
LED
Operating voltage
5 VDC
A165L-Δ@M-5D-1P
A165L-Δ@M-12D-1P
A165L-Δ@M-24D-1P
A165-Δ@M-1P
12 VAC/VDC
24 VAC/VDC
R: red
Y: yellow
PY: pure yellow
G: green
A: blue
W: white
B: black *2
Non-lighted
5 pcs
5 VDC
A165L-Δ@M-5D-2P
A165L-Δ@M-12D-2P
A165L-Δ@M-24D-2P
A165-Δ@M-2P
LED
12 VAC/VDC
24 VAC/VDC
DPDT
Non-lighted
Note: Contact your OMRON representative about Selector Switches and Key Selector Switches.
*1. Enter the desired shape for the Pushbutton in Δ: J (rectangular), A (square), or T (round). Enter the desired color symbol for the Pushbutton in the @.
*2. Black (“B”) Pushbuttons are only available for non-lighted models.
1
A16□-P
Pushbutton Switch (Detachable) (Lighted/Non-Lighted) (Cylindrical 16-dia.)
Specifications
■Approved Standard Ratings
●UL, cUL (File No. E41515)
■Characteristics
Type
Pushbutton Switch
Item
5 A at 125 VAC, 3 A at 25± VAC (general use)
3 A at 3± VDC (resistive)
Momentary operation: 12± operations/minute max.
Alternate operation: 6± operations/minute max. *1
2± operations/minute max. *1
Allowable
operating
frequency
Mechanical
Electrical
Note: Certification has been obtained for the
Socket Unit.
Insulation resistance
1±± MΩ min. (at 5±± VDC)
Between
●TÜV (EN6±947-5-1)
(Low Voltage Directive)
3 A at 25± VAC
terminals of
same polarity
Between
terminals of
different
1,±±± VAC, 5±/6± Hz for 1 minute
2,±±± VAC, 5±/6± Hz for 1 minute
2,±±± VAC, 5±/6± Hz for 1 minute
Dielectric
strength
3 A at 3± VDC
polarity
●CCC (GB14±48.5)
5 A at 125 VAC
Between each
terminal and
ground
Between lamp
terminals
3 A at 25± VAC
A
1
1,±±± VAC, 5±/6± Hz for 1 minute *2
3 A at 3± VDC
6
Vibration
resistance
Malfunction
1± to 55 Hz, 1.5-mm double amplitude (malfunction within 1 ms)
@
■Ratings
P
Destruction
Malfunction
5±± m/s2
Shock
resistance
● Contacts
15± m/s2 max. (malfunction within 1 ms)
Momentary operation: 2,±±±,±±± operations min.
Alternate operation: 2±±,±±± operations min. *1
1±±,±±± operations min. *1
Rated voltage
125 VAC
Resistive load
Mechanical
Electrical
Durability
5
3
3
25± VAC
Electric shock protection
class
Class II
3± VDC
PTI (tracking characteristic)
Degree of contamination
Weight
Ambient operating
temperature
175
3 (IEC947-5-1)
Minimum applicable load: 1 mA at 5 VDC
Rated values are obtained from tests conducted
under the following conditions.
1. Load: Resistive load
2. Mounting conditions: No vibration and no shock
3. Temperature: 2± ±2°C
Approx. 12 g (in the case of a lighted DPDT switch with solder terminals)
–1±°C to +55°C (with no icing or condensation)
35% to 85%RH
Ambient operating humidity
4. Operating frequency: 2± operations/min
Ambient storage
temperature
–25°C to +65°C (with no icing or condensation)
● Contact Form
*1. Set and reset constitute one operation.
*2. With LED and incandescent lamp not mounted.
Name
Contact
NC
NO
Double-throw
COM
Dimensions
(Unit: mm)
28.3
Rectangular A16@-J@-@P
PCB terminals
9.5
26.4
6
23.1
21.1
1±.8
4
2.5
18.4 2±.4
6.3
±.5
Lock ring
Mounting nut
4.85 12.4 18.6
18 15.1
±.5
21
Packing (t±.5)
(for oil-resistant IP65 only)
24
The Dimension shows 1-switch output.
The lamp terminal is also provided with non-lighted models.
A rectangular model is listed as an example.
Unless specified, there is a tolerance of ±±.4mm for dimensions.
2
A16□-P
■Terminal Arrangement
Pushbutton Switch (Detachable) (Lighted/Non-Lighted) (Cylindrical 16-dia.)
● PCB Terminals (Lamp terminals are also present on non-lighted models.)
Lighted SPDT Switches
Lighted DPDT Switches
Terminal Arrangement
Terminal Arrangement
(Bottom View)
(Bottom View)
Side with TOP
indicated
Model, rating, and lot
number indication
Dimensions of
PCB Terminals
Side with TOP indicated
Dimensions of
PCB Terminals
NC
NO
NC
NO
5.3
NC
NO
5.3
3.5
L−
L−
3.5
1.5
1.5
COM
COM
COM
SW 1
SW 2
SW 1
±.8
±.8
4.85
12.4
18.6
4.85
2.7
2.7
12.4
High heat resistant resin is used for the
Lever allowing dip soldering.
High heat resistant resin is used for
the Lever allowing dip soldering.
Lamp terminal (t=±.5)
18.6
Lamp terminal (t=±.5)
A
1
6
PCB Cutouts
(Bottom View)
PCB Cutouts
(Bottom View)
@
A±±.1
A
±.1
Side with TOP indicated
Side with TOP indicated
P
12.4 ±.±5
12.4 ±.±5
2± ±.1
4.85 ±.±5
2± ±.1
4.85 ±.±5
L
±.1
L
±.1
6.3 ±.±5
6.3 ±.±5
Two, 5 dia.
Five, 1 dia.
A = 24 min.: Rectangular
A = 21 min.: Square or round
L = 24 min.
Dimensions of A and L shall match the Panel cutouts.
Use t = 1.6 for the PCB.
6.3 ±.±5
Two, 5 dia.
A = 24 min.: Rectangular
A = 21 min.: Square or round
L = 24 min.
Use a PCB with a thickness of 1.6 mm.
Note: Secure the panel to the board using stud
bolts if force will be applied to the board
after wiring.
Note: Secure the panel to the board using stud bolts
if force will be applied to the board after wiring.
Eight, 1 dia.
■Panel Cutouts
● PCB Terminals
Precautions
● Refer to the Common Precautions for Pushbutton
Switches" for common precautions.
Square A16@-A/M16@-A
Round A16@-T/M16@-T
Rectangular A16@-J/M16@-J
(Top View)
A= (24 min.) ±.1
(Top View)
● Mounting multiple PCB Terminal Pushbutton Switches
Be careful with the pitch between the centers of mounting holes
when mounting multiple PCB Terminal Pushbutton Switches,
otherwise the Switches may be , resulting in malfunction.
Mounting Hole Dimensions of PCB Cutouts
16+±.2dia.
16+±.2dia.
A= (21 min.) ±.1
±
±
9.1 ±.±5
9.1 ±.±5
L=
L=
(24 min.) ±.1
14.7 ±.±5 dia.
5.1 ±.±5
(24 min.) ±.1
14.7 ±.±5 dia.
5.1 ±.±5
(Bottom View)
A3 ±.1
A2 ±.1
A1 ±.1
Note: Make sure the thickness of the mounting panel is between ±.5 and 3.2
mm. If, however, a Switch Guard or Dust Cover is used, the thickness
of the mounting panel must be between ±.5 and 2 mm.
If the panel is to be finished with coating, etc., make sure that the
panel meets the specified dimensions after coating.
Datum line
Mounting Hole Dimensions of the Panel Cutouts
(Top View)
A3 ±.1
A2 ±.1
A1 ±.1
Datum line
3
A16□-P
Pushbutton Switch (Detachable) (Lighted/Non-Lighted) (Cylindrical 16-dia.)
A
1
6
@
P
• Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.
• Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad
systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious
influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or
equipment, and be sure to provide the system or equipment with double safety mechanisms.
Note: Do not use this document to operate the Unit.
OMRON Corporation
ELECTRONIC AND MECHANICAL COMPONENTS COMPANY
Contact: www.omron.com/ecb
Cat. No. A116-E1-04
±812(±2±7)(O)
4
相关型号:
©2020 ICPDF网 联系我们和版权申明