SFP-CH25 [OKI]
Soldering and Rework System;型号: | SFP-CH25 |
厂家: | OKI ELECTRONIC COMPONETS |
描述: | Soldering and Rework System |
文件: | 总6页 (文件大小:267K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Soldering and Rework System
Cartridge heater technology provides soldering and rework performance to suit even the most
demanding SMT removal and placement applications. The cartridges provide fast thermal
performance and respond quickly to the load demands. A small shaft diameter provides access to
tightly cramped rework areas and enables the most difficult operations to be performed
effortlessly.
MFR-SRC SOLDERING & REWORK SYSTEM
MFR-PTZ, MFR-SRC, MFR-PST, MFR-STZ
Part No.
MFR-SRC
INCLUDES
MFR-PS1K
MFR-HSR
MFR-WSSR
Description
Ambient Operating Temperature:10- 40°C
Maximum Enclosure Temperature:55°C
Input Line Voltage:100- 240 VAC, grounded circuit
Input Line Frequency:50/60 Hz
Soldering and Rework System
Power Consumption:65 Watts max.
Output Power:
Two Port Universal Voltage Power Supply
Soldering and Rework Hand-piece
Soldering Workstand
50 Watts max. at 22°C ambient temperature
Output Frequency:450 KHz
Power Cord 3-Wire:183cm (18/3") SJT
Power Supply Dimensions w x d x h:
122mm x 200mm x 152.5mm (4.8" x 8" x 6")
Agency Tested Per:IEC 61000-6-1,EC 61000-6-3 and
UL499, FCC CFR Part 15
Contents subject to change without notice
Tip-to-Ground Potential:< 2mV
Tip-to-Ground Resistance:< 2 ohms
Idle Temperature Stability:± 1.1°C in still air
Hand-piece Cable Length:
Standard Soldering Tip Cartridges
L=71cm (48"), burn proof, ESD safe
Connector:8-pin power connector
Workstand Dimensions w x d x h:
100 mm x 200 mm x 100 mm (4" x 8" x 4")
The Standard Soldering Tip Cartridges are used with the MFR-HSR Soldering & Rework Hand-piece
and have been designed to deliver outstanding performance for the majority of point-to-point
deliver maximum accessibility combined with optimal thermal efficiency within a narrow cartridge
diameter.
With hand soldering, the task is to make a
quality solder connection, without damaging the
substrate and without negatively impacting
throughput. All of the standard MFR Series power
tips & rework cartridges are designed for use
with glass fiber (FR4) PCB substrates. This is
denoted by the second letter in the part
number: "F". For example: SFP-CH10, DFP-CN3,
and SFV-CNL10.
SFP-BVL10
Bevel Cartridge, 60° 1.0mm (.04")
SFP-CH10
Chisel Cartridge, 30° 1.0mm (.04")
However, some specialist applications require
working with thermally demanding or
SFP-CH15
temperature sensitive substrates, such as
ceramic hybrids or flexible circuits. OK
Chisel Cartridge, 30° 1.5mm (.06")
International has developed specialty heaters
that quickly deliver the necessary power, but
operate at temperatures that minimize the risk
of substrate damage. These are denoted by
replacing the "F" in the part number with a "T"
for temperature sensitive or a "C" for demanding
loads. Please contact your local representative
for information and availability of specialty tip
heaters. For example: STP-CH10 and DCP-CN3.
SFP-CH20
Chisel Cartridge, 30° 2.0mm (.08")
SFP-CH25
Chisel Cartridge, 30° 2.5mm (.10")
F = Standard FR4 Substrate
T = Temperature
SFP-CH50
Sensitive
Chisel Cartridge, 30° 5.0mm (.20")
C = Ceramic or Heavy Load
SFP-CHB15
Chisel Cartridge, 30° Bent 1.5mm (.06")
SFP-CHL20
Chisel Cartridge, 60° Long Reach 2.0mm (.08")
SFP-CN04
Conical Cartridge, 0.4mm (.016")
SFP-CN05
Conical Cartridge, 0.5mm (.02")
SFP-CNB04
Conical Cartridge Bent, 0.4mm (.016")
SFP-CNB05
Conical Cartridge Bent, 0.5mm (.02")
SFP-CNL04
Conical Cartridge Long Reach, 0.4mm (.016")
SFP-DRH05
MFR-SMT in Action
Drag Soldering Cartridge, Hoof 0.5mm (.02")
SFP-DRH15
Drag Soldering Cartridge, Hoof 1.5mm (.06")
SFP-DRH35
Drag Soldering Cartridge, Hoof 3.5mm (.14")
SFP-DRK50
Drag Soldering Cartridge, Knife 5.0mm (.20")
To order specialty versions of the Soldering Tip Cartridges replace the "F" in the part number with
the appropriate letter designate for your application when ordering:
T = Temperature Sensitive C = Ceramic or Heavy Load
Rework Cartridges
The Rework Cartridges are used with the MFR-HSR Soldering & Rework Hand-piece for conduction
rework of surface mount components. The geometries are compatible with common SMT Chip and
SOIC components.
Blade Cartridges
Part No.
Description
A
RFP-BL1
Blade Cartridge
10mm (0.4")
RFP-BL2
Blade Cartridge
16mm (0.63")
RFP-BL3
Blade Cartridge
22mm (0.87")
Slot Cartridges
Part No.
RFP-SL1
SMT Type
A
0805 Chip Package
2.34mm (.092")
RFP-SL2
1206 Chip Package
3.48mm (.137")
Tunnel Cartridges
Dimensions in mm (")
Part
No.
SMT
A2
A
B
D
Type
RFP-
DL1
SOIC
5.18
5.18
4.32
3.22
14-16
(.204)
(.204)
(.17)
(.127)
RFP-
DL2
5.18
5.18
4.32
2.29
SOIC 8
(.204)
(.204)
(.17)
(.090)
RFP-
DL13
SOIC
16
6.86
6.86
11.18
(.44)
2.29
(.270)
(.270)
(.090)
Quad Cartridges
Dimensions in mm (")
Part
No.
SMT
A2
A
B2
B
D
Type
RFP- PLCC 11.43 12.70 13.97 15.24 3.81
QD4 32 (.450) (.500) (.550) (.600) (.150)
RFP- PLCC 16.76 17.78 16.76 17.78 3.81
QD6 44 (.660) (.700) (.660) (.700) (.150)
RFP- PLCC 24.38 25.27 24.38 25.27 5.59
QD7 68 (.960) (.995) (.960) (.995) (.220)
RFP- PLCC 19.30 20.32 19.30 20.32 3.81
QD10 52 (.760) (.800) (.760) (.800) (.150)
RFP- TQFP 12.32 13.34 12.32 13.34 2.79
QD15 80
(.485) (.535) (.485) (.535) (.110)
RFP- QFP
QD19 44
16.13 16.13 16.13 16.13 3.30
(.635) (.635) (.635) (.635) (.130)
RFP- QFP
QD20 100
16.51 16.51 22.48 22.48 3.30
(.650) (.650) (.885) (.885) (.130)
The second digit denotes substrate material (damage tolerance). F = FR4 / Glass Fiber, for most
standard applications. Two other series are also available; just replace F with either T or C.
T = Temperature Sensitive C = Ceramic or Heavy Load
© 2007 OK International. All rights reserved.
http://www.okinternational.com/product_soldering_mfr/mfr_src (6 of 6) [3/28/08 1:37:12 PM]
相关型号:
©2020 ICPDF网 联系我们和版权申明