OA680KE [OHMITE]
OD/OF/OA Series; OD / OF / OA系列型号: | OA680KE |
厂家: | OHMITE MFG. CO. |
描述: | OD/OF/OA Series |
文件: | 总2页 (文件大小:226K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CompoSition
axial
OD/OF/OA Series
Little Demon® Carbon Composition Molded
OD/OF Series (5% Tol.) OA Series (10%)
Ohmite’s Little Demons are small, reliable carbon
composition resistors with exceptional strength.
They are made tough by a molding process that
combines the terminals, insulation and resistive ele-
ment into an integrated unit. Along with their small
size, Little Demons perform with low noise, dissipate
heat rapidly and offer high temperature stability.
Color codes are readable even after prolonged use
thanks to a very durable coating that resists abra-
sions and chipping normally associated with auto-
matic insertion equipment.
F ꢀ At u ꢁ ꢀ S
•ꢀMoldedꢀinsulationꢀforꢀhighꢀdielectricꢀstrength
•ꢀRuggedꢀconstruction
•ꢀHighꢀsurgeꢀcapabilities
•ꢀComparableꢀtoꢀ“Mil”ꢀRC07,ꢀRC20,ꢀandꢀRC32ꢀtypes
•ꢀOD/OFꢀSeriesꢀavailableꢀinꢀE24ꢀvalues
•ꢀOAꢀSeriesꢀavailableꢀinꢀE12ꢀvalues
SꢀꢁꢂꢀS SpꢀcFꢂcAtꢂOnS
Series Wattage
Ohms
Tolerance Max. Voltage Dielectric VAC
OD
OF
OA
0.25 2.2-5.6M
±5%
±5%
±10%
250
350
500
500
700
1000
0.50
1.00
2.2-20M
2.2-1M
chAꢁActꢀꢁꢂStꢂcS
100,000
Solder-coated copper terminal.
Molded Phenolic
Terminals
Body
Single Pulse Power Capability
OF
10,000
1,000
100
10
±5% (OD/OF); ±10% (OA)
Tolerance
Derating
OD
Linearly from 100% @ +70°C to 0% @ 130°C
1
10
-7
-6
-5
-4
-3
-2
-1
10
10
10
10
10
10
1
Pulse width (s)
DꢂmꢀnSꢂOnS
Series Length max. Diam. max. Lead Dia.
1.135" ±0.12 / 28.83mm ±3
(OA: 1.18" / 30.0mm)
D
L
OD
OF
OA
0.276 / 7.0 0.098 / 2.5 0.024/0.60
0.406 /10.3 0.150 / 3.8 0.028/0.70
0.591 /15.0 0.236 / 6.0 0.035/0.92
1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com
CompoSition
axial
OD/OF/OA Series
Little Demon® Carbon Composition Molded
OD/OF Series (5% Tol.) OA Series (10%)
pAckAgꢂng
Storage: Ohmite recommends storing carbon composition
All resistors are packaged in sealed poly bags with desiccant
to maintain a consistent humidity during storage. If parts are
removed from the protective plastic bag they should be used
as soon as possible or resealed in the plastic bag.
resistorsꢀinꢀaꢀcontrolledꢀenvironmentꢀatꢀaꢀtemperatureꢀofꢀ5°ꢀtoꢀ
35°Cꢀandꢀrelativeꢀhumidityꢀofꢀlessꢀthanꢀ60%.ꢀInventoryꢀshouldꢀ
always be used on a first-in-first-out basis.
Tape/Reel
OD
OF
0.5mm max.
6mm .5
280mm
(ref.)
Qty./reel
5000
260
3000
260
+1.6
-1.4
52.4mm
Reel size (mm)
Qty./carton
40,000 24,000
260mm
5
Gross carton wt. (kg)
12
0.04
13
0.04
Carton size (m3)
275mm 5 (OD)
455mm 5 (OF)
5.08mm .38
1mm max.
Ammo Box
OD
OF
Tape width (mm)
Qty./box
52
2000
52
2000
60mm 5 (OD)
65mm 5 (OF)
14.5mm .5
60.4mm 1
Qty./carton
30,000 30,000
Gross carton wt. (kg)
Carton size (m3)
10
0.03
16
0.05
L1
L2
3.2mm min.
3mm
75mm
5
L1 – L2 = 1mm max.
60.4mm
1
ꢁꢀSꢂStOꢁ uSꢀ guꢂDꢀlꢂnꢀS
Carbon composition resistors are manufactured by extruding
a blend of carbon and organic binders inside a phenolic outer
body. The extrusion is cut to length, leads inserted, cured,
and marked to form a finished resistor. The carbon and binder
mixture is adjusted to produce different resistance values. The
resistorsꢀareꢀsortedꢀforꢀ5%,ꢀ10%,ꢀandꢀ20%ꢀtoleranceꢀvalues.
Carbon composition resistors are able to withstand larger
short-term pulses and higher voltages than film resistors and
areꢀvirtuallyꢀimperviousꢀtoꢀESDꢀeventsꢀ(Electro-staticꢀdis-
charge). Carbon composition resistors are also sensitive to
moisture and, therefore, storage recommendations should be
adhered to. Generally, any moisture absorbed during storage
will be "baked out" during the soldering operation. If the prod-
uct is stored properly the resistance shift during the soldering
operationꢀwillꢀbeꢀminimal,ꢀlessꢀthanꢀ2%ꢀorꢀ3%.
Carbon composition resistors are highly hygroscopic and
changes in resistance value can occur if too much moisture is
absorbed.ꢀForꢀthisꢀreason,ꢀitꢀisꢀrecommendedꢀnotꢀtoꢀuseꢀwaterꢀ
or water-soluble solvents to clean these components. Alcohol
or hydrocarbon solvents are recommended for rinsing.
bAkꢀ pꢁOcꢀDuꢁꢀ
A. Heat Treatment C. Solder heat test after treatment
D. Cautions
ꢀꢀꢀꢀ110°Cꢀ±10°C
ꢀꢀꢀꢀ15ꢀhours
B. Frequency of
heat treatment
Solder
Temp.
300°Cꢀ
350°Cꢀ
Dip
Solderability: may be affected due to oxidization of lead wire
Resistance value: some units may not completely recover to
Type
ODꢀ
OFꢀ
Time
Evaluation
3ꢀsecꢀ withinꢀ±3% original value.
3ꢀsecꢀ withinꢀ±3% Soldering heat: some treated product may have substantial
ꢀꢀꢀꢀ1ꢀtimeꢀonly
resistance change during soldering operation. It is recom-
mended that parts be tested to evaluate soldering heat
effects.
*DepthꢀofꢀImmersion:ꢀ3mmꢀfromꢀtheꢀresistorꢀ
body
OꢁDꢀꢁꢂng ꢂnFOꢁmAtꢂOn
•ꢀOD/OFꢀSeriesꢀavailableꢀinꢀE24ꢀvalues
•ꢀOAꢀSeriesꢀavailableꢀinꢀE12ꢀvalues
Tape & reel
RoHS compliant optional
O D 6 8 3 J E -TR
Series
Ohms
Tolerance
OD 68G=
OF 680 =
OA 681 =
6.8 OD, OF: J = 5%
68 OA:
680
K = 10%
682 = 6,800
683 = 68,000
684 = 680,000
1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com
相关型号:
©2020 ICPDF网 联系我们和版权申明