SA57000-33D [NXP]
CapFREE 150 mA, low-noise, low dropout regulator with thermal protection; 无电容150毫安,低噪声,低压差稳压器,热保护器型号: | SA57000-33D |
厂家: | NXP |
描述: | CapFREE 150 mA, low-noise, low dropout regulator with thermal protection |
文件: | 总8页 (文件大小:106K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
INTEGRATED CIRCUITS
SA57000-XX
CapFREE 150 mA, low-noise, low dropout
regulator with thermal protection
Product data
2001 Aug 27
Supersedes data of 2001 Jul 12
File under Integrated Circuits, Standard Analog
Philips
Semiconductors
Philips Semiconductors
Product data
CapFREE 150 mA, low-noise, low dropout regulator
with thermal protection
SA57000-XX
GENERAL DESCRIPTION
The CapFREE SA57000 is the first in a new family of unique low
dropout regulators. It needs no external capacitors, offers a low
output noise voltage of 30 µV
, and an ultra-low dropout voltage
RMS
of 55 mV @ 50 mA output current. To accommodate high density
layouts, it is packaged in the small footprint 5 leaded SOT23-5 (SO5).
It is ideal for all portable and cellular phone applications.
Additional features include power and thermal shutdown, output
current limitation, power OK status, thermal warning, and external
logic-controlled on-off via the PWRON pin.
FEATURES
APPLICATIONS
• CapFREE: No output capacitor needed, stable for all capacitive
• Cordless and mobile phones
loads, regardless of ESR
• Industrial and medical equipment
• Other battery-powered equipment.
• Low 30 µV
noise without noise bypass capacitor
RMS
• Preset output voltages to 2.5 V, 2.8 V, 3.0 V, 3.3 V and 3.6 V;
other voltages available upon request. 2% output voltage
accuracy
• 150 mA maximum output current with current limitation
• Typical dropout voltage 55 mV @ 50 mA output current
• 85 µA typical ground current
• Thermal-overload and short-circuit protection
• PWROK pin: both power status and thermal warning indicator
• PWRON pin offers logic-controlled shutdown
• Maximum line regulation: 0.1%/V
• Maximum load regulation: 0.02%/mA.
SIMPLIFIED SYSTEM DIAGRAM
SA57000
PWRON
3
PWRON
4
PWROK
OVER 144 °C (POWER/THERMAL SHUTDOWN)
OVER 127 °C (POWER/THERMAL WARNING)
LOGIC
CONTROL
PWRON
TEMPERATURE
SENSOR
LOW-PASS
FILTER
OUTPUT
AMP.
V
5
PWRON
OUT
BAND
GAP
GND
2
1
PWRON
BIAS
NETWORK
V
IN
SA00557
Figure 1. Simplified system diagram.
CapFREE is a trademark of Philips Electronics North America Corporation.
2001 Aug 27
2
853–2265 26991
Philips Semiconductors
Product data
CapFREE 150 mA, low-noise, low dropout regulator
with thermal protection
SA57000-XX
ORDERING INFORMATION
PACKAGE
TEMPERATURE
RANGE
TYPE NUMBER
NAME
DESCRIPTION
VERSION
SOT23-5,
SOT25, SO5
SA57000-XXD
plastic small outline package; 5 leads (see dimensional drawing)
SOT680-1
–40 to +85 °C
NOTE:
Part number marking
The device has five voltage output options, indicated by the XX on
the Type Number.
Each package is marked with a four letter code. The first three
letters designate the product. The fourth letter, represented by ‘x’, is
a date tracking code.
XX
25
28
30
33
36
VOLTAGE (Typical)
Part number
SA57000-25D
SA57000-28D
SA57000-30D
SA57000-33D
SA57000-36D
Marking
A B K x
A B L x
A B M x
A B N x
A B P x
2.5 V
2.8 V
3.0 V
3.3 V
3.6 V
PIN CONFIGURATION
PIN DESCRIPTION
PIN SYMBOL
DESCRIPTION
1
V
Regulator input. V
No bypass capacitor required.
+ 0.1 V to 5.5 V.
OUT(nom)
IN
V
1
2
3
5
V
OUT
IN
2
3
GND
Ground.
GND
PWRON
Power-on input. Active-HIGH. A logic LOW
powers down regulator. The shutdown
quiescent current is typically 50 nA.
PWRON
4
PWROK
Connect to V for manual operation.
IN
4
5
PWROK
Power OK indicator, including thermal
warning. Trips (goes LOW) at 127 °C (±2°),
or when power falls typically 6% below
SA00556
V
.
Figure 2. Pin configuration.
OUT(nom)
V
OUT
Regulator output. Sources up to 150 mA.
No bypass capacitors required.
MAXIMUM RATINGS
SYMBOL
PARAMETER
MIN.
–0.3
–0.3
–0.3
–40
–
MAX.
5.5
UNIT
V
V
V
V
to GND voltage
V
dc
V
dc
V
dc
IN
IN
PWRON to GND voltage
OUT to GND voltage
5.5
PWRON
OUT
V
+ 0.3
IN
T
Operating ambient temperature
Junction temperature
+85
°C
°C
amb
T
j
+150
+160
575
T
stg
Storage temperature
–65
–
°C
P
Power dissipation
mW
°C/W
R
Thermal resistance from junction to ambient
–
140
th(j-a)
3
2001 Aug 27
Philips Semiconductors
Product data
CapFREE 150 mA, low-noise, low dropout regulator
with thermal protection
SA57000-XX
CHARACTERISTICS
V
IN
= V
+ 0.5 V. (Note 1.)
OUT(nom)
SYMBOL
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNIT
V
IN
input voltage
V
–
5.5
V
OUT(nom)
2
I
= 1 mA
output voltage accuracy
OUT
T
= +25 °C
–
±1
–
%
%
amb
–40 °C ≤ T
≤ +85 °C
–2.0
–
2.0
amb
I
current limit
160
–
300
85
–
150
–
mA
µA
LIM
I
Q
ground pin current
I
= 1 mA to 150 mA
OUT
3
I
= 1 mA
= 50 mA
= 150 mA
–
1
mV
dropout voltage
OUT
I
–
55
120
–
mV
OUT
I
–
165
–
mV
OUT
∆V
∆V
line regulation
V
IN
= (V
+ 0.1 V) to 5.5 V; I = 20 mA
OUT
–
0.1
0.02
–
%/V
%/mA
LNR
OUT
load regulation
I
= 1 mA to 150 mA
–
0.01
30
LDR
OUT
e
output voltage noise
f = 10 Hz to 100 kHz, C
= 10 µF
–
µV
RMS
n
OUT
Shutdown
V
V
I
PWRON input threshold
(HIGH ON-state)
V
V
→ V
→ V
V
→ 5.5 V
→ 5.5 V
0.7 × V
IN
–
–
–
V
V
IH
IN
OUT(nom)
PWRON input threshold
(HIGH ON-state)
–
0.3 × V
IL
IN
OUT(nom)
IN
= V
PWRON input bias current
PWRON
IN
PWRON
Q(SHDN)
PWRON
T
amb
= +25 °C
= +85 °C
–
–
0.01
0.05
1
–
µA
µA
T
amb
V
= 0 V
I
t
shutdown supply current
OUT
T
amb
= +25 °C
= +85 °C
–
–
0.05
0.2
1
1
µA
µA
T
amb
4
I
= 1 mA, C
= 100 nF
OUT
power-on start-up time
OUT
T
= +25 °C
–
–
25
35
100
200
µs
µs
amb
T
= –40 to +85 °C
amb
Thermal protection (Note 2)
T
thermal shut-down temperature
thermal shut-down hysteresis
–
–
144
13
–
–
°C
°C
SHDN
∆T
SHDN
PWROK output (power and temperature OK) (Note 2)
PWROK trip temperature
–
–
127
12
–
–
°C
°C
PWROK trip temperature
hysteresis
PWROK trip as percentage of
–3.5
–
–6
2
–8
–
%
%
V
V
OUT(nom)
PWROK hysteresis as
percentage of V
OUT(nom)
PWROK output (when tripped)
I
= 0.5 mA
–
0.1
0.4
SINK
NOTES:
1. Limits are production tested at T
= +25 °C. All devices are 100% production tested at 25 °C. Limits over the operating tempreature are
amb
guaranteed by design.
2. Accuracy ±2 °C over temperature range guaranteed by design and characterization.
,
3. The dropout voltage is defined as V – V
where V
is 100 mV below the value of V
for V = V
+ 0.5 V..
OUT
IN
OUT
OUT
OUT
IN
4. Time needed for V
to reach 95% of V
.
OUT
OUT(nom)
4
2001 Aug 27
Philips Semiconductors
Product data
CapFREE 150 mA, low-noise, low dropout regulator
with thermal protection
SA57000-XX
TYPCIAL PERFORMANCE CURVES
Measurements taken with the SA57000-33 (3.3 volt output).
3.40
3.38
3.36
3.34
3.32
3.30
100
80
60
40
20
0
I
V
= 50 mA
LOAD
IN
= V
OUT(nom)
+ 0.5 V
V
= V
= 50 mA
+ 0.5 V
IN
OUT(nom)
I
LOAD
–40
–20
0
20
40
60
80
100
–40
–20
0
20
40
60
80
100
T , TEMPERATURE °C)
amb
T , TEMPERATURE °C)
amb
SL01516
SL01515
Figure 3. Output voltage versus temperature.
Figure 4. Ground current versus temperature.
0
0
LOAD CURRENT = 50 mA
–100
–100
–200
–300
–400
–200
–300
–400
–500
–600
–500
–600
1.0
2.0
3.0
4.0
5.0
6.0
1.0
2.0
3.0
V , INPUT VOLTAGE (V)
IN
4.0
5.0
6.0
V
, INPUT VOLTAGE (V)
IN
SL01517
SL01518
Figure 5. Ground current versus input voltage (no load).
Figure 6. Ground current versus input voltage with load.
5
2001 Aug 27
Philips Semiconductors
Product data
CapFREE 150 mA, low-noise, low dropout regulator
with thermal protection
SA57000-XX
PACKING METHOD
The SA57000-XX is packed in reels, as shown in Figure 7.
GUARD
BAND
TAPE
TAPE DETAIL
REEL
ASSEMBLY
COVER TAPE
CARRIER TAPE
BARCODE
LABEL
BOX
SL01305
Figure 7. Tape and reel packing method
6
2001 Aug 27
Philips Semiconductors
Product data
CapFREE 150 mA, low-noise, low dropout regulator
with thermal protection
SA57000-XX
SO5: plastic small outline package; 5 leads; body width 1.6 mm
SOT680-1
7
2001 Aug 27
Philips Semiconductors
Product data
CapFREE 150 mA, low-noise, low dropout regulator
with thermal protection
SA57000-XX
Data sheet status
Product
status
Definitions
[1]
Data sheet status
[2]
Objective data
Development
This data sheet contains data from the objective specification for product development.
Philips Semiconductors reserves the right to change the specification in any manner without notice.
Preliminary data
Product data
Qualification
Production
This data sheet contains data from the preliminary specification. Supplementary data will be
published at a later date. Philips Semiconductors reserves the right to change the specification
without notice, in order to improve the design and supply the best possible product.
This data sheet contains data from the product specification. Philips Semiconductors reserves the
right to make changes at any time in order to improve the design, manufacturing and supply.
Changes will be communicated according to the Customer Product/Process Change Notification
(CPCN) procedure SNW-SQ-650A.
[1] Please consult the most recently issued data sheet before initiating or completing a design.
[2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL
http://www.semiconductors.philips.com.
Definitions
Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or
at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended
periods may affect device reliability.
Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips
Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or
modification.
Disclaimers
Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application.
Righttomakechanges—PhilipsSemiconductorsreservestherighttomakechanges, withoutnotice, intheproducts, includingcircuits,standard
cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified.
Koninklijke Philips Electronics N.V. 2001
Contact information
All rights reserved. Printed in U.S.A.
For additional information please visit
http://www.semiconductors.philips.com.
Fax: +31 40 27 24825
Date of release: 08-01
9397 750 08722
For sales offices addresses send e-mail to:
sales.addresses@www.semiconductors.philips.com.
Document order number:
Philips
Semiconductors
相关型号:
SA57000-33D,115
SA57000-XX - CapFREE (tm) 150 mA, low noise, low dropout regulator with thermal protection SOP 5-Pin
NXP
SA57000-33D-G
IC VREG 3.3 V FIXED POSITIVE LDO REGULATOR, 0.12 V DROPOUT, PDSO5, 1.60 MM, PLASTIC, MO-178, SOT-680-1, SO-5, Fixed Positive Single Output LDO Regulator
NXP
SA57000-36D-G
IC VREG 3.6 V FIXED POSITIVE LDO REGULATOR, 0.12 V DROPOUT, PDSO5, 1.60 MM, PLASTIC, MO-178, SOT-680-1, SO-5, Fixed Positive Single Output LDO Regulator
NXP
SA57000-36UK
IC VREG 3.6 V FIXED POSITIVE LDO REGULATOR, 0.12 V DROPOUT, PBGA5, WL-CSP-5, Fixed Positive Single Output LDO Regulator
NXP
SA57001-20GW-G
IC VREG 2 V FIXED POSITIVE LDO REGULATOR, 0.2 V DROPOUT, PDSO5, 1.60 MM, PLASTIC, MO-178, SOT-23, SOP-5, Fixed Positive Single Output LDO Regulator
NXP
SA57001-25GW
IC VREG 2.5 V FIXED POSITIVE LDO REGULATOR, 0.2 V DROPOUT, PDSO5, 1.60 MM, PLASTIC, MO-178, SOT-23, SOP-5, Fixed Positive Single Output LDO Regulator
NXP
SA57001-28GW
IC VREG 2.8 V FIXED POSITIVE LDO REGULATOR, 0.2 V DROPOUT, PDSO5, 1.60 MM, PLASTIC, MO-178, SOT-23, SOP-5, Fixed Positive Single Output LDO Regulator
NXP
SA57001-28GW-G
IC VREG 2.8 V FIXED POSITIVE LDO REGULATOR, 0.2 V DROPOUT, PDSO5, 1.60 MM, PLASTIC, MO-178, SOT-23, SOP-5, Fixed Positive Single Output LDO Regulator
NXP
SA57001-31GW
IC VREG 3.1 V FIXED POSITIVE LDO REGULATOR, 0.2 V DROPOUT, PDSO5, 1.60 MM, PLASTIC, MO-178, SOT-23, SOP-5, Fixed Positive Single Output LDO Regulator
NXP
©2020 ICPDF网 联系我们和版权申明