IP4242CZ6 [NXP]

ESD protection for high-speed interfaces; 对于高速接口ESD保护
IP4242CZ6
型号: IP4242CZ6
厂家: NXP    NXP
描述:

ESD protection for high-speed interfaces
对于高速接口ESD保护

文件: 总9页 (文件大小:53K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
IP4242CZ6  
ESD protection for high-speed interfaces  
Rev. 01 — 12 March 2009  
Product data sheet  
1. Product profile  
1.1 General description  
The IP4242CZ6 is designed to protect high-speed interfaces such as HDMI, DVI and  
DisplayPort interfaces. The device includes high-level ElectroStatic Discharge (ESD)  
protection diodes for the TMDS signal lines.  
All TMDS intra-pairs are protected by a special diode configuration offering a low line  
capacitance of only 0.9 pF. These diodes provide protection to downstream components  
from ESD voltages up to ±8 kV contact according to IEC 61000-4-2, level 4.  
1.2 Features  
I Pb-free, RoHS compliant and free of Halogen and Antimony (Dark Green compliant)  
I ESD protection for HDMI  
I All TMDS lines with integrated rail-to-rail clamping diodes for downstream ESD  
protection of ±8 kV according to IEC 61000-4-2, level 4  
I Matched 0.5 mm trace spacing  
I Line capacitance of only 0.9 pF for each channel  
I 2-channel, 6-terminal UTLP  
I HDMI 1.3a compliant  
I DisplayPort compliant  
1.3 Applications  
The IP4242CZ6 is designed for HDMI receiver and transmitter port protection:  
I TVs, monitors  
I DVD recorders and players  
I Notebooks, main board graphics cards and ports  
I Set-top boxes and game consoles  
IP4242CZ6  
NXP Semiconductors  
ESD protection for high-speed interfaces  
2. Pinning information  
Table 1.  
Pinning  
Pin Symbol  
Description  
Simplified outline  
Graphic symbol  
1
2
3
4
5
6
TMDS_CH1  
negative channel 1 ESD protection  
positive channel 1 ESD protection  
ground  
1
2
1
2
3
TMDS_CH1+  
GND  
GND  
ground  
n.c.  
not connected  
6
5
4
n.c.  
not connected  
bottom view  
3, 4  
001aaj776  
3. Ordering information  
Table 2.  
Ordering information  
Type number Package  
Name  
Description  
Version  
IP4242CZ6  
XSON6  
plastic extremely thin small outline package; no leads; SOT886  
6 terminals; body 1 × 1.45 × 0.5 mm  
4. Limiting values  
Table 3.  
Limiting values  
In accordance with the Absolute Maximum Rating System (IEC 60134).  
Symbol Parameter  
Conditions  
Min  
Max  
Unit  
V
VI  
input voltage  
GND 0.5 +5.5  
Vesd  
electrostatic discharge  
voltage  
all pins to ground;  
IEC 61000-4-2, level 4;  
contact discharge  
8  
+8  
kV  
Tstg  
storage temperature  
ambient temperature  
55  
40  
+125  
+85  
°C  
°C  
Tamb  
5. Characteristics  
Table 4.  
Symbol  
VBRzd  
Characteristics  
Parameter  
Conditions  
I = 1 mA  
Min Typ Max Unit  
[1]  
Zener diode breakdown voltage  
6
-
-
9
1
-
V
ILRzd  
Zener diode reverse leakage current per TMDS channel; V = 3.0 V  
forward voltage  
-
µA  
V
VF  
-
0.7  
0.9  
[1]  
[1]  
[1]  
Cch(TMDS)  
Cch(TMDS)  
Cch(mutual)  
TMDS channel capacitance  
TMDS channel capacitance difference f = 1 MHz; Vbias = 2.5 V  
mutual channel capacitance between signal pin and pin n.c.;  
f = 1 MHz; Vbias = 2.5 V  
-
-
pF  
pF  
pF  
-
0.15 -  
0.15 -  
-
f = 1 MHz; Vbias = 2.5 V  
IP4242CZ6_1  
© NXP B.V. 2009. All rights reserved.  
Product data sheet  
Rev. 01 — 12 March 2009  
2 of 9  
IP4242CZ6  
NXP Semiconductors  
ESD protection for high-speed interfaces  
Table 4.  
Symbol  
Rdyn  
Characteristics …continued  
Parameter  
Conditions  
Min Typ Max Unit  
dynamic resistance  
I = 1 A; Tamb = 25 °C; IEC 61000-4-5/9  
positive transient  
-
-
-
2.4  
1.3  
8
-
-
-
V
negative transient  
[2]  
VCL(ch)trt(pos) positive transient channel clamping  
voltage  
Vesd = 8 kV HBM; Tamb = 25 °C  
[1] This parameter is guaranteed by design.  
[2] Human Body Model according to JESD22-A-J114D.  
IP4242CZ6_1  
© NXP B.V. 2009. All rights reserved.  
Product data sheet  
Rev. 01 — 12 March 2009  
3 of 9  
IP4242CZ6  
NXP Semiconductors  
ESD protection for high-speed interfaces  
6. Application information  
The IP4242CZ6 is designed mainly to provide high-level ESD protection for high-speed  
serial data buses such as HDMI, DVI, DisplayPort, USB2.0 and other LVDS data lines.  
It is recommended that when designing the printed-circuit board, careful consideration is  
given to impedance matching, and signal coupling.  
An basic application diagram for the ESD protection of an HDMI interface is shown in  
Figure 1, and a USB interface in Figure 2.  
IP4242CZ6  
IP4242CZ6  
IP4242CZ6  
IP4242CZ6  
IP4242CZ6  
IP4242CZ6  
TMDS_D2+  
TMDS_GND  
TMDS_CH1+  
TMDS_CH1  
GND  
2
1
3
TMDS_D2−  
TMDS_D1+  
TMDS_CH1+  
2
TMDS_GND  
TMDS_CH1−  
1
3
TMDS_D1−  
GND  
TMDS_D0+  
TMDS_GND  
TMDS_CH1+  
TMDS_CH1−  
GND  
2
1
3
TMDS_D0−  
HDMI  
CONNECTOR  
TMDS_CLK+  
TMDS_CH1+  
2
TMDS_GND  
TMDS_CH1−  
1
3
TMDS_CLK−  
GND  
CEC  
n.c.  
TMDS_CH1+  
TMDS_CH1−  
GND  
2
1
3
DDC_CLK  
DDC_DAT  
TMDS_CH1+  
2
GND  
+5 V  
TMDS_CH1−  
1
3
GND  
HOT PLUG DETECTION  
001aaj808  
Fig 1. Application diagram of HDMI ESD protection using IP4242CZ6  
IP4242CZ6_1  
© NXP B.V. 2009. All rights reserved.  
Product data sheet  
Rev. 01 — 12 March 2009  
4 of 9  
IP4242CZ6  
NXP Semiconductors  
ESD protection for high-speed interfaces  
VBUS  
TMDS_CH1+  
TMDS_CH1−  
GND  
D+  
D−  
2
USB  
CONNECTOR  
1
3
GND  
001aaj809  
IP4242CZ6  
Fig 2. Application diagram of USB ESD protection using IP4242CZ6  
IP4242CZ6_1  
© NXP B.V. 2009. All rights reserved.  
Product data sheet  
Rev. 01 — 12 March 2009  
5 of 9  
IP4242CZ6  
NXP Semiconductors  
ESD protection for high-speed interfaces  
7. Package outline  
XSON6: plastic extremely thin small outline package; no leads; 6 terminals; body 1 x 1.45 x 0.5 mm  
SOT886  
b
1
2
3
4×  
(2)  
L
L
1
e
6
5
4
e
1
e
1
6×  
(2)  
A
A
1
D
E
terminal 1  
index area  
0
1
2 mm  
scale  
DIMENSIONS (mm are the original dimensions)  
(1)  
A
A
1
UNIT  
b
D
E
e
e
L
L
1
1
max max  
0.25  
0.17  
1.5  
1.4  
1.05  
0.95  
0.35 0.40  
0.27 0.32  
mm  
0.5 0.04  
0.6  
0.5  
Notes  
1. Including plating thickness.  
2. Can be visible in some manufacturing processes.  
REFERENCES  
JEDEC JEITA  
OUTLINE  
VERSION  
EUROPEAN  
PROJECTION  
ISSUE DATE  
IEC  
04-07-15  
04-07-22  
SOT886  
MO-252  
Fig 3. Package outline SOT886 (XSON6)  
IP4242CZ6_1  
© NXP B.V. 2009. All rights reserved.  
Product data sheet  
Rev. 01 — 12 March 2009  
6 of 9  
IP4242CZ6  
NXP Semiconductors  
ESD protection for high-speed interfaces  
8. Abbreviations  
Table 5.  
Abbreviations  
Description  
Acronym  
DVD  
Digital Versatile Disc  
Digital Visual Interface  
ElectroStatic Discharge  
Human Body Model  
DVI  
ESD  
HBM  
HDMI  
LVDS  
RoHS  
TMDS  
USB  
High-Definition Multimedia Interface  
Low-Voltage Differential Signaling  
Restriction of Hazardous Substances  
Transition Minimized Differential Signaling  
Universal Serial Bus  
UTLP  
Ultra-Thin Leadless Package  
9. Revision history  
Table 6.  
Revision history  
Document ID  
Release date  
Data sheet status  
Change notice  
Supersedes  
IP4242CZ6_1  
20090312  
Product data sheet  
-
-
IP4242CZ6_1  
© NXP B.V. 2009. All rights reserved.  
Product data sheet  
Rev. 01 — 12 March 2009  
7 of 9  
IP4242CZ6  
NXP Semiconductors  
ESD protection for high-speed interfaces  
10. Legal information  
10.1 Data sheet status  
Document status[1][2]  
Product status[3]  
Development  
Definition  
Objective [short] data sheet  
This document contains data from the objective specification for product development.  
This document contains data from the preliminary specification.  
This document contains the product specification.  
Preliminary [short] data sheet Qualification  
Product [short] data sheet Production  
[1]  
[2]  
[3]  
Please consult the most recently issued document before initiating or completing a design.  
The term ‘short data sheet’ is explained in section “Definitions”.  
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status  
information is available on the Internet at URL http://www.nxp.com.  
Applications — Applications that are described herein for any of these  
10.2 Definitions  
products are for illustrative purposes only. NXP Semiconductors makes no  
representation or warranty that such applications will be suitable for the  
specified use without further testing or modification.  
Draft — The document is a draft version only. The content is still under  
internal review and subject to formal approval, which may result in  
modifications or additions. NXP Semiconductors does not give any  
representations or warranties as to the accuracy or completeness of  
information included herein and shall have no liability for the consequences of  
use of such information.  
Limiting values — Stress above one or more limiting values (as defined in  
the Absolute Maximum Ratings System of IEC 60134) may cause permanent  
damage to the device. Limiting values are stress ratings only and operation of  
the device at these or any other conditions above those given in the  
Characteristics sections of this document is not implied. Exposure to limiting  
values for extended periods may affect device reliability.  
Short data sheet — A short data sheet is an extract from a full data sheet  
with the same product type number(s) and title. A short data sheet is intended  
for quick reference only and should not be relied upon to contain detailed and  
full information. For detailed and full information see the relevant full data  
sheet, which is available on request via the local NXP Semiconductors sales  
office. In case of any inconsistency or conflict with the short data sheet, the  
full data sheet shall prevail.  
Terms and conditions of sale — NXP Semiconductors products are sold  
subject to the general terms and conditions of commercial sale, as published  
at http://www.nxp.com/profile/terms, including those pertaining to warranty,  
intellectual property rights infringement and limitation of liability, unless  
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of  
any inconsistency or conflict between information in this document and such  
terms and conditions, the latter will prevail.  
10.3 Disclaimers  
No offer to sell or license — Nothing in this document may be interpreted  
or construed as an offer to sell products that is open for acceptance or the  
grant, conveyance or implication of any license under any copyrights, patents  
or other industrial or intellectual property rights.  
General — Information in this document is believed to be accurate and  
reliable. However, NXP Semiconductors does not give any representations or  
warranties, expressed or implied, as to the accuracy or completeness of such  
information and shall have no liability for the consequences of use of such  
information.  
Export control — This document as well as the item(s) described herein  
may be subject to export control regulations. Export might require a prior  
authorization from national authorities.  
Right to make changes — NXP Semiconductors reserves the right to make  
changes to information published in this document, including without  
limitation specifications and product descriptions, at any time and without  
notice. This document supersedes and replaces all information supplied prior  
to the publication hereof.  
10.4 Licenses  
Purchase of NXP ICs with HDMI technology  
Suitability for use — NXP Semiconductors products are not designed,  
authorized or warranted to be suitable for use in medical, military, aircraft,  
space or life support equipment, nor in applications where failure or  
malfunction of an NXP Semiconductors product can reasonably be expected  
to result in personal injury, death or severe property or environmental  
damage. NXP Semiconductors accepts no liability for inclusion and/or use of  
NXP Semiconductors products in such equipment or applications and  
therefore such inclusion and/or use is at the customer’s own risk.  
Use of an NXP IC with HDMI technology in equipment that complies with  
the HDMI standard requires a license from HDMI Licensing LLC, 1060 E.  
Arques Avenue Suite 100, Sunnyvale CA 94085, USA, e-mail:  
admin@hdmi.org.  
10.5 Trademarks  
Notice: All referenced brands, product names, service names and trademarks  
are the property of their respective owners.  
11. Contact information  
For more information, please visit: http://www.nxp.com  
For sales office addresses, please send an email to: salesaddresses@nxp.com  
IP4242CZ6_1  
© NXP B.V. 2009. All rights reserved.  
Product data sheet  
Rev. 01 — 12 March 2009  
8 of 9  
IP4242CZ6  
NXP Semiconductors  
ESD protection for high-speed interfaces  
12. Contents  
1
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
1.1  
1.2  
1.3  
General description. . . . . . . . . . . . . . . . . . . . . . 1  
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
2
3
4
5
6
7
8
9
Pinning information. . . . . . . . . . . . . . . . . . . . . . 2  
Ordering information. . . . . . . . . . . . . . . . . . . . . 2  
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Application information. . . . . . . . . . . . . . . . . . . 4  
Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 7  
10  
Legal information. . . . . . . . . . . . . . . . . . . . . . . . 8  
Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 8  
Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
10.1  
10.2  
10.3  
10.4  
10.5  
11  
12  
Contact information. . . . . . . . . . . . . . . . . . . . . . 8  
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Please be aware that important notices concerning this document and the product(s)  
described herein, have been included in section ‘Legal information’.  
© NXP B.V. 2009.  
All rights reserved.  
For more information, please visit: http://www.nxp.com  
For sales office addresses, please send an email to: salesaddresses@nxp.com  
Date of release: 12 March 2009  
Document identifier: IP4242CZ6_1  

相关型号:

IP4251

Integrated 4-, 6- and 8-channel passive filter network with ESD protection to IEC 61000-4-2, level 4
NXP

IP4251CZ12-6

Integrated 4-, 6- and 8-channel passive filter network with ESD protection to IEC 61000-4-2, level 4
NXP

IP4251CZ12-6,135

IP4251/52/53/54 - Integrated 4-, 6- and 8-channel passive filter network with ESD protection to IEC 61000-4-2, level 4 DFN 12-Pin
NXP

IP4251CZ12-6-TTL

Integrated 4-, 6- and 8-channel passive filter network with ESD protection
NXP

IP4251CZ12-6-TTL,1

FILTER RC(PI) 100 OHM/10PF SMD
ETC

IP4251CZ16-8

Integrated 4-, 6- and 8-channel passive filter network with ESD protection to IEC 61000-4-2, level 4
NXP

IP4251CZ16-8,135

IP4251/52/53/54 - Integrated 4-, 6- and 8-channel passive filter network with ESD protection to IEC 61000-4-2, level 4 DFN 16-Pin
NXP

IP4251CZ16-8-TTL

Integrated 4-, 6- and 8-channel passive filter network with ESD protection
NXP

IP4251CZ16-8-TTL,1

IP4251/52/53/54-TTL - Integrated 4-, 6- and 8-channel passive filter network with ESD protection DFN 16-Pin
NXP

IP4251CZ8-4

Integrated 4-, 6- and 8-channel passive filter network with ESD protection to IEC 61000-4-2, level 4
NXP

IP4251CZ8-4,135

IP4251/52/53/54 - Integrated 4-, 6- and 8-channel passive filter network with ESD protection to IEC 61000-4-2, level 4 DFN 8-Pin
NXP

IP4251CZ8-4-TTL

Integrated 4-, 6- and 8-channel passive filter network with ESD protection
NXP