GTL2000DL-T [NXP]
NXP bidirectional low-voltage translators; 恩智浦的双向低电压转换器型号: | GTL2000DL-T |
厂家: | NXP |
描述: | NXP bidirectional low-voltage translators |
文件: | 总2页 (文件大小:239K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
4ꢀ
4ꢀ
4ꢀ
4ꢀ
4ꢀ
Propagationꢀdelay:ꢀ1.5ꢀnsꢀ(typ)
Channelꢀoff-stateꢀcapacitance:ꢀ7.5ꢀpF
Veryꢀlowꢀ(5ꢀµA)ꢀstandbyꢀcurrent
Eachꢀdeliversꢀhigh-speedꢀtranslationꢀ
betweenꢀdifferentꢀvoltageꢀlevelsꢀwithꢀ
Noꢀpowerꢀsupplyꢀrequiredꢀ–ꢀpreventsꢀ lowꢀON-stateꢀresistanceꢀandꢀminimalꢀ
4ꢀ
VeryꢀsmallꢀQFNꢀpackageꢀoptions
4ꢀ
4ꢀ
4ꢀ
Uni-ꢀandꢀbidirectionalꢀtranslationꢀforꢀ
theyꢀofferꢀgreaterꢀdesignꢀflexibilityꢀthanꢀ
level-shiftingꢀbusꢀswitches,ꢀwhichꢀonlyꢀ
translateꢀbetweenꢀfixedꢀvoltages.ꢀ
characteristicsꢀsoꢀdeviationꢀfromꢀoneꢀ
outputꢀtoꢀanotherꢀinꢀvoltageꢀandꢀ
propagationꢀdelayꢀisꢀkeptꢀtoꢀaꢀminimum.ꢀ
Theꢀtransistorsꢀalsoꢀprovideꢀexcellentꢀ
ESDꢀprotectionꢀinꢀcaseꢀtheꢀlow-voltageꢀ
devicesꢀthatꢀareꢀlessꢀresistantꢀtoꢀESD.ꢀ
4ꢀ
Noꢀdirectionalꢀcontrolꢀrequiredꢀforꢀ
NXP bidirectional
low-voltage translators
GTL20xx
Low cost bidirectional voltage
translation without directional control
Unlikeꢀlevel-shiftingꢀbusꢀswitches,ꢀwhichꢀonlyꢀtranslateꢀbetweenꢀfixedꢀvoltages,ꢀtheseꢀbidirectionalꢀ
low-voltageꢀtranslatorsꢀcanꢀtranslateꢀanyꢀvoltageꢀbetweenꢀ1ꢀandꢀ5ꢀVꢀtoꢀanyꢀotherꢀvoltageꢀbetweenꢀ
1ꢀandꢀ5ꢀV.ꢀTheyꢀalsoꢀreduceꢀON-stateꢀresistanceꢀandꢀminimizeꢀpropagationꢀdelay.
Key features
TheꢀNXPꢀfamilyꢀofꢀGunningꢀTransceiverꢀ
Logicꢀ(GTL)ꢀbidirectionalꢀlow-voltageꢀ
translatorsꢀincludesꢀtheꢀ22-bitꢀGTL2000,ꢀ
theꢀ2-bitꢀGTL2002,ꢀtheꢀ8-bitꢀGTL2003,ꢀ
andꢀtheꢀ10-bitꢀGTL2010.ꢀ
WhenꢀoneꢀofꢀtheꢀSnꢀorꢀDnꢀportsꢀisꢀlow,ꢀ
theꢀclampꢀisꢀinꢀtheꢀON-stateꢀandꢀtheꢀSnꢀ
andꢀDnꢀportsꢀareꢀlinkedꢀthroughꢀaꢀlowꢀ
ON-resistanceꢀconnection.ꢀAssumingꢀtheꢀ
higherꢀvoltageꢀisꢀappliedꢀonꢀtheꢀDnꢀport,ꢀ
whenꢀtheꢀDnꢀportꢀisꢀhigh,ꢀtheꢀvoltageꢀonꢀ
theꢀSnꢀportꢀisꢀlimitedꢀtoꢀtheꢀvoltageꢀsetꢀ
byꢀSREF.ꢀWhenꢀtheꢀSnꢀportꢀisꢀhigh,ꢀtheꢀDnꢀ
portꢀisꢀpulledꢀtoꢀaꢀhigherꢀvoltageꢀbyꢀaꢀ
pull-upꢀresistor.
bidirectionalꢀvoltageꢀtranslations
LowꢀRONꢀresistanceꢀ(6.5ꢀΩ)ꢀbetweenꢀ
inputꢀandꢀoutputꢀpinsꢀ(Sn/Dn)
latch-ups
propagationꢀdelay.ꢀ
Theyꢀcanꢀtranslateꢀanyꢀvoltageꢀbetweenꢀ
1ꢀandꢀ5ꢀVꢀtoꢀanyꢀotherꢀvoltageꢀbetweenꢀ
1ꢀandꢀ5ꢀVꢀasꢀlongꢀasꢀthereꢀisꢀatꢀleastꢀ1ꢀVꢀ
Thisꢀset-upꢀenablesꢀseamlessꢀtranslationꢀ
betweenꢀuser-selectedꢀvoltages,ꢀwithoutꢀ
theꢀneedꢀforꢀdirectionalꢀcontrolꢀsignals.ꢀ
Applications
anyꢀvoltageꢀbetweenꢀ1ꢀandꢀ5ꢀV
Bidirectionalꢀtranslationꢀofꢀlow-
voltageꢀandꢀlegacyꢀI2C-busꢀsignals
ShiftingꢀprocessorꢀsidebandꢀI/Oꢀ
signalsꢀbetweenꢀGTLꢀandꢀLVTTL/TTLꢀ
levels
differenceꢀbetweenꢀtheꢀvoltageꢀlevels,ꢀsoꢀ Allꢀtransistorsꢀhaveꢀtheꢀsameꢀelectricalꢀ
EachꢀGTL20xxꢀdeviceꢀincludesꢀNMOSꢀ
passꢀtransistorsꢀ(SnꢀandꢀDnꢀpins)ꢀwithꢀaꢀ
commonꢀgateꢀ(GREFꢀpin)ꢀandꢀaꢀreferenceꢀ
transistorꢀ(SREFꢀandꢀDREFꢀpins).ꢀ
Theꢀtranslatorsꢀcanꢀbeꢀusedꢀinꢀanyꢀ
applicationꢀthatꢀrequiresꢀuni-ꢀorꢀ
toꢀSREFꢀandꢀtheꢀoutputꢀofꢀeachꢀDnꢀhasꢀaꢀ
maximumꢀoutputꢀvoltageꢀequalꢀtoꢀtheꢀ
Forꢀup-onlyꢀtranslation,ꢀaꢀpull-upꢀresistorꢀ
isꢀrequiredꢀonꢀtheꢀhigh-sideꢀvoltageꢀ(Dn).ꢀ
bidirectionalꢀvoltageꢀtranslationꢀforꢀ
voltageꢀlevelsꢀbetweenꢀ1ꢀandꢀ5ꢀV.ꢀ
Theꢀopen-drainꢀconstruction,ꢀwhichꢀ
eliminatesꢀtheꢀneedꢀforꢀdirectionalꢀ
control,ꢀmakesꢀtheꢀtranslatorsꢀidealꢀforꢀ
voltageꢀofꢀtheꢀpull-upꢀresistorꢀ(3.3ꢀand/orꢀ Thisꢀisꢀbecauseꢀtheꢀtranslatorꢀwillꢀonlyꢀ
5ꢀV).
passꢀtheꢀreferenceꢀsourceꢀvoltageꢀ(SREF)ꢀ
asꢀaꢀhighꢀwhenꢀdoingꢀup-translation.ꢀTheꢀ
driverꢀonꢀtheꢀlow-sideꢀvoltageꢀonlyꢀneedsꢀ
aꢀpull-upꢀresistorꢀifꢀitꢀisꢀsetꢀasꢀopenꢀdrain.ꢀ
Unidirectional voltage translation
designsꢀthatꢀcombineꢀlow-voltageꢀ(1.0ꢀtoꢀ Theꢀsameꢀconfigurationꢀcanꢀbeꢀusedꢀforꢀ
1.8ꢀV)ꢀandꢀlegacyꢀ(3.3ꢀand/orꢀ5.5ꢀV)ꢀI2C-
busꢀsignals.ꢀTheꢀtranslatorsꢀcanꢀchangeꢀ
I2C-busꢀsignalꢀlevelsꢀatꢀspeedsꢀupꢀtoꢀ3.4ꢀ
MHz.
one-wayꢀvoltageꢀtranslation,ꢀeitherꢀupꢀ
orꢀdown.ꢀForꢀdown-onlyꢀtranslation,ꢀifꢀ
theꢀchipsetꢀI/Oꢀareꢀopenꢀdrain,ꢀpull-upꢀ
resistorsꢀareꢀrequired.
Forꢀmoreꢀinformationꢀonꢀusingꢀtheꢀ
GTL20xxꢀfamily,ꢀpleaseꢀreferꢀtoꢀ
ApplicationꢀNoteꢀAN10145ꢀatꢀwww.nxp.
com/interface.
Theꢀtranslatorsꢀcanꢀalsoꢀbeꢀusedꢀinꢀ
designsꢀthatꢀcombineꢀGTLꢀandꢀLVTTL/
TTLꢀsignals,ꢀshiftingꢀprocessorꢀsidebandꢀ
I/Oꢀsignalsꢀbetweenꢀvoltageꢀlevels.
GND
1
2
3
4
5
6
7
8
9
48
47
46
45
44
43
42
41
40
G
D
REF
REF
1
S
REF
GTL2002
S
1
D
D
D
D
D
D
D
D
D
S
2
2
S
3
3
GTL2003
S
4
4
S
5
5
5V
1.8V
1.5V
1.2V
1.0V
Bidirectional voltage translation
Toꢀconfigureꢀtheꢀtranslatorsꢀforꢀ
bidirectionalꢀclamping,ꢀtheꢀGREFꢀinputꢀ
mustꢀbeꢀconnectedꢀtoꢀDREFꢀandꢀbothꢀ
pinsꢀmustꢀbeꢀpulledꢀtoꢀtheꢀhigh-sideꢀ
VCCꢀthroughꢀaꢀpull-upꢀresistorꢀ(typicallyꢀ
200ꢀkΩ).ꢀAꢀfilterꢀcapacitorꢀonꢀDREFꢀisꢀ
recommended.
GTL2010
S
6
6
Totem Pole or
Open Drain I/O
S
7
7
200 K7
S
8
10
11
12
13
14
15
16
17
18
39
38
37
36
8
GTL2002
S
9
9
GND
G
D
REF
S
10
D
D
D
10
11
12
S
V
V
REF
REF
D1
CC
CORE
S
11
S1
S2
S
12
35
34
33
32
31
30
29
28
27
26
25
CPU I/O
Chipset I/O
D2
S
13
D
D
D
D
D
D
D
D
D
D
13
14
15
16
17
18
19
20
21
22
S
14
3.3V
S
15
Increase bit size by using
8-bit GTL2003 or 10-bit
GTL2010 or 22-bit GTL2000
S
16
S
17
19
20
21
22
23
24
V
CC
S
18
S3
S4
S5
Sn
D3
D4
D5
Dn
Chipset I/O
S
19
TheꢀCPUꢀoutputꢀcanꢀbeꢀsetꢀasꢀtotemꢀ
poleꢀorꢀopenꢀdrainꢀ(pull-upꢀresistorsꢀmayꢀ
beꢀrequired),ꢀasꢀcanꢀtheꢀchipsetꢀoutputꢀ
(pull-upꢀresistorsꢀareꢀrequiredꢀtoꢀpullꢀ
theꢀDnꢀoutputsꢀtoꢀVCC).ꢀNoꢀdirectionalꢀ
controlꢀisꢀneededꢀifꢀbothꢀoutputsꢀareꢀsetꢀ
asꢀopenꢀdrain.ꢀIfꢀeitherꢀoutputꢀisꢀsetꢀtoꢀ
totemꢀpole,ꢀhowever,ꢀthereꢀmayꢀbeꢀhigh-
to-lowꢀcontentionsꢀinꢀeitherꢀdirection.ꢀToꢀ
preventꢀthis,ꢀsetꢀdataꢀasꢀunidirectionalꢀ
orꢀuseꢀ3-stateableꢀoutputsꢀwithꢀaꢀ
S
20
S
21
S
22
GTL20xx pinout diagram
Typical configuration for bidirectional voltage translation
Ordering information
Package
Container GTL2000
GTL2002
GTL2003
GTL2010
SO
Tube
T&R
Tube
T&R
Tube
T&R
T&R
--
GTL2002D
--
--
--
GTL2002D-T
--
--
SSOP
GTL2000DL
GTL2000DL-T
GTL2000DGG
--
--
--
--
--
--
--
mechanismꢀforꢀdirectionꢀcontrol.ꢀ
TSSOP
GTL2003PW
GTL2010PW
GTL2000DGG-T GTL2002DP-T GTL2003PW-T GTL2010PW-T
TheꢀoppositeꢀsideꢀofꢀSREFꢀisꢀconnectedꢀ
toꢀtheꢀCPUꢀpower-supplyꢀvoltage.ꢀWhenꢀ
DREFꢀisꢀconnectedꢀthroughꢀaꢀ200-kΩꢀ
resistorꢀtoꢀVCCꢀandꢀSREFꢀisꢀsetꢀbetweenꢀ1.0ꢀ
andꢀVCCꢀminusꢀ1.5ꢀV,ꢀtheꢀoutputꢀofꢀeachꢀ
HVQFN
--
--
--
--
--
--
--
GTL2010BS-T
DHVQFN T&R
GTL2003BQ-T --
VSSOP
XQFN
T&R
T&R
GTL2002DC-T --
GTL2002GM-T --
--
--
Note: In Europe and Asia, for tube orders, add “, 112” (e.g. GTL2010PW, 112), and for tape and
Snꢀhasꢀaꢀmaximumꢀoutputꢀvoltageꢀequalꢀ reel orders, replace “-T” with “, 118” (e.g. GTL2010PW, 118).
www.nxp.com
© 2007 NXP N.V.
Date of release: March 2007
Document order number: 9397 750 15911
Printed in the USA
All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The
information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and
may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof
does not convey nor imply any license under patent or other industrial or intellectual property rights.
相关型号:
©2020 ICPDF网 联系我们和版权申明