BTA204S-500D [NXP]
Three quadrant triacs guaranteed commutation; 三象限三端双向可控硅保证换向
| 型号： | BTA204S-500D |
| 厂家： | 
NXP |
| 描述： | Three quadrant triacs guaranteed commutation |
| 文件： | 总9页 (文件大小：74K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DISCRETE SEMICONDUCTORS
DATA SHEET
BTA204S series D, E and F
BTA204M series D, E and F
Three quadrant triacs guaranteed
commutation
Product specification
December 1998
Philips Semiconductors
Product specification
Three quadrant triacs
guaranteed commutation
BTA204S series D, E and F
BTA204M series D, E and F
GENERAL DESCRIPTION
QUICK REFERENCE DATA
Passivated guaranteed commutation
triacs in a plastic envelope suitable for
surface mounting, intended for use in
motor control circuits or with other
highly inductive loads. These devices
SYMBOL PARAMETER
MAX. MAX. MAX. UNIT
BTA204S (or BTA204M)- 500D 600D
-
BTA204S (or BTA204M)- 500E 600E 800E
BTA204S (or BTA204M)- 500F 600F 800F
Repetitive peak
off-state voltages
RMS on-state current
Non-repetitive peak on-state 25
current
balance
the
requirements
of
VDRM
500
600
800
V
commutation performance and gate
sensitivity. The "sensitive gate" E
series and "logic level" D series are
intended for interfacing with low power
drivers, including micro controllers.
IT(RMS)
ITSM
4
4
25
4
25
A
A
PINNING - SOT428
PIN CONFIGURATION
SYMBOL
PIN
NUMBER
Standard Alternative
tab
S
M
1
2
MT1
MT2
gate
MT2
gate
MT2
MT1
MT2
T2
T1
2
3
G
1
3
tab
LIMITING VALUES
Limiting values in accordance with the Absolute Maximum System (IEC 134).
SYMBOL PARAMETER
CONDITIONS
MIN.
MAX.
UNIT
V
-500
-600
-800
800
VDRM
Repetitive peak off-state
voltages
-
-
5001
6001
IT(RMS)
ITSM
RMS on-state current
full sine wave;
4
A
Tmb ≤ 107 ˚C
Non-repetitive peak
on-state current
full sine wave;
Tj = 25 ˚C prior to
surge
t = 20 ms
-
-
-
25
27
3.1
100
A
A
t = 16.7 ms
I2t
I2t for fusing
Repetitive rate of rise of
on-state current after
triggering
Peak gate current
Peak gate voltage
Peak gate power
Average gate power
t = 10 ms
A2s
A/µs
dIT/dt
ITM = 6 A; IG = 0.2 A;
dIG/dt = 0.2 A/µs
IGM
-
-
-
-
2
5
5
A
V
W
W
VGM
PGM
PG(AV)
over any 20 ms
period
0.5
Tstg
Tj
Storage temperature
Operating junction
temperature
-40
-
150
125
˚C
˚C
1 Although not recommended, off-state voltages up to 800V may be applied without damage, but the triac may
switch to the on-state. The rate of rise of current should not exceed 6 A/µs.
December 1998
2
Rev1.000
Philips Semiconductors
Product specification
Three quadrant triacs
guaranteed commutation
BTA204S series D, E and F
BTA204M series D, E and F
THERMAL RESISTANCES
SYMBOL PARAMETER
CONDITIONS
MIN. TYP. MAX. UNIT
Rth j-mb
Thermal resistance
full cycle
-
-
-
-
-
75
3.0
3.7
-
K/W
K/W
K/W
junction to mounting base half cycle
Rth j-a
Thermal resistance
junction to ambient
pcb (FR4) mounted; footprint as in Fig.14
STATIC CHARACTERISTICS
Tj = 25 ˚C unless otherwise stated
SYMBOL PARAMETER
CONDITIONS
MIN. TYP.
MAX.
...E
UNIT
BTA204S (or BTA204M)-
...D
...F
IGT
Gate trigger current2
Latching current
Holding current
VD = 12 V; IT = 0.1 A
T2+ G+
-
-
-
-
-
-
5
5
5
10
10
10
25
25
25
mA
mA
mA
T2+ G-
T2- G-
IL
VD = 12 V; IGT = 0.1 A
T2+ G+
-
-
-
-
-
-
-
-
6
9
6
6
12
18
12
12
20
30
20
20
mA
mA
mA
mA
T2+ G-
T2- G-
IH
VD = 12 V; IGT = 0.1 A
VT
VGT
On-state voltage
Gate trigger voltage
IT = 5 A
VD = 12 V; IT = 0.1 A
-
-
1.4
0.7
1.7
1.5
V
V
VD = 400 V; IT = 0.1 A;
Tj = 125 ˚C
VD = VDRM(max); Tj = 125 ˚C
0.25
-
0.4
0.1
-
V
ID
Off-state leakage
current
0.5
mA
DYNAMIC CHARACTERISTICS
Tj = 25 ˚C unless otherwise stated
SYMBOL PARAMETER
CONDITIONS
MIN.
...E
30
TYP. MAX. UNIT
BTA204S (or BTA204M)-
...D
...F
dVD/dt
Critical rate of rise of
off-state voltage
VDM = 67% VDRM(max)
;
20
50
-
-
-
-
V/µs
Tj = 125 ˚C; exponential
waveform; gate open circuit
dIcom/dt
Critical rate of change VDM = 400 V; Tj = 125 ˚C;
of commutating current IT(RMS) = 4 A;
dVcom/dt = 20V/µs; gate
1.0
5.0
-
2.0
2.5
A/ms
open circuit
dIcom/dt
Critical rate of change VDM = 400 V; Tj = 125 ˚C;
of commutating current IT(RMS) = 4 A;
dVcom/dt = 0.1V/µs; gate
-
-
-
-
-
-
-
A/ms
open circuit
tgt
Gate controlled turn-on ITM = 12 A; VD = VDRM(max)
time
;
2
µs
IG = 0.1 A; dIG/dt = 5 A/µs
2 Device does not trigger in the T2-, G+ quadrant.
December 1998
3
Rev1.000
Philips Semiconductors
Product specification
Three quadrant triacs
guaranteed commutation
BTA204S series D, E and F
BTA204M series D, E and F
IT(RMS) / A
Ptot / W
Tmb(max) / C
5
4
3
2
1
0
8
7
6
5
4
3
2
1
0
101
104
107
110
113
116
119
122
125
107 C
= 180
120
1
90
60
30
0
1
2
3
4
5
-50
0
50
100
150
IT(RMS) / A
Tmb / C
Fig.1. Maximum on-state dissipation, Ptot, versus rms
on-state current, IT(RMS), where α = conduction angle.
Fig.4. Maximum permissible rms current IT(RMS)
versus mounting base temperature Tmb.
,
IT(RMS) / A
ITSM / A
12
10
8
1000
100
10
I
TSM
time
I
T
T
Tj initial = 25 C max
6
dIT/dt limit
4
T2- G+ quadrant
2
0
10us
100us
1ms
T / s
10ms
100ms
0.01
0.1
1
10
surge duration / s
Fig.2. Maximum permissible non-repetitive peak
on-state current ITSM, versus pulse width tp, for
sinusoidal currents, tp ≤ 20ms.
Fig.5. Maximum permissible repetitive rms on-state
current IT(RMS), versus surge duration, for sinusoidal
currents, f = 50 Hz; Tmb ≤ 107˚C.
VGT(Tj)
VGT(25 C)
ITSM / A
30
25
20
15
10
5
1.6
1.4
1.2
1
I
TSM
time
I
T
T
Tj initial = 25 C max
0.8
0.6
0.4
0
1
10
100
1000
-50
0
50
Tj / C
100
150
Number of cycles at 50Hz
Fig.3. Maximum permissible non-repetitive peak
on-state current ITSM, versus number of cycles, for
sinusoidal currents, f = 50 Hz.
Fig.6. Normalised gate trigger voltage
VGT(Tj)/ VGT(25˚C), versus junction temperature Tj.
December 1998
4
Rev1.000
Philips Semiconductors
Product specification
Three quadrant triacs
guaranteed commutation
BTA204S series D, E and F
BTA204M series D, E and F
IGT(Tj)
IGT(25 C)
IT / A
12
10
8
Tj = 125 C
Tj = 25 C
3
2.5
2
T2+ G+
T2+ G-
T2- G-
typ
max
Vo = 1.27 V
Rs = 0.091 ohms
6
1.5
1
4
2
0.5
0
0
-50
0
50
Tj / C
100
150
0
0.5
1
1.5
VT / V
2
2.5
3
Fig.7. Normalised gate trigger current
IGT(Tj)/ IGT(25˚C), versus junction temperature Tj.
Fig.10. Typical and maximum on-state characteristic.
IL(Tj)
IL(25 C)
Zth j-mb (K/W)
10
1
3
2.5
2
unidirectional
bidirectional
1.5
1
t
P
D
0.1
0.01
p
t
0.5
0
10us
0.1ms
1ms
10ms
tp / s
0.1s
1s
10s
-50
0
50
Tj / C
100
150
Fig.8. Normalised latching current IL(Tj)/ IL(25˚C),
versus junction temperature Tj.
Fig.11. Transient thermal impedance Zth j-mb, versus
pulse width tp.
IH(Tj)
IH(25C)
3
2.5
2
1.5
1
0.5
0
-50
0
50
100
150
Tj / C
Fig.9. Normalised holding current IH(Tj)/ IH(25˚C),
versus junction temperature Tj.
December 1998
5
Rev1.000
Philips Semiconductors
Product specification
Three quadrant triacs
guaranteed commutation
BTA204S series D, E and F
BTA204M series D, E and F
MECHANICAL DATA
Dimensions in mm
Net Mass: 1.1 g
seating plane
2.38 max
0.93 max
1.1
5.4
6.73 max
tab
4 min
4.6
6.22 max
0.5 min
10.4 max
0.5
2
0.3
0.5
3
1
0.8 max
(x2)
2.285 (x2)
Fig.12. SOT428 : centre pin connected to tab.
MOUNTING INSTRUCTIONS
Dimensions in mm
7.0
7.0
2.15
2.5
1.5
4.57
Fig.13. SOT428 : minimum pad sizes for surface mounting.
Notes
1. Plastic meets UL94 V0 at 1/8".
December 1998
6
Rev1.000
Philips Semiconductors
Product specification
Three quadrant triacs
guaranteed commutation
BTA204S series D, E and F
BTA204M series D, E and F
DEFINITIONS
Data sheet status
Objective specification
This data sheet contains target or goal specifications for product development.
Preliminary specification This data sheet contains preliminary data; supplementary data may be published later.
Product specification
This data sheet contains final product specifications.
Limiting values
Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and
operation of the device at these or at any other conditions above those given in the Characteristics sections of
this specification is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
Philips Electronics N.V. 1998
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the
copyright owner.
The information presented in this document does not form part of any quotation or contract, it is believed to be
accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any
consequence of its use. Publication thereof does not convey nor imply any license under patent or other
industrial or intellectual property rights.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices or systems where malfunction of these
products can be reasonably expected to result in personal injury. Philips customers using or selling these products
for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting
from such improper use or sale.
December 1998
7
Rev1.000
Philips Semiconductors – a worldwide company
Argentina: see South America
Netherlands: Postbus 90050, 5600 PB EINDHOVEN, Bldg. VB,
Tel. +31 40 27 82785, Fax. +31 40 27 88399
Australia: 3 Figtree Drive, HOMEBUSH, NSW 2140,
Tel. +61 2 9704 8141, Fax. +61 2 9704 8139
New Zealand: 2 Wagener Place, C.P.O. Box 1041, AUCKLAND,
Tel. +64 9 849 4160, Fax. +64 9 849 7811
Austria: Computerstr. 6, A-1101 WIEN, P.O. Box 213,
Tel. +43 1 60 101 1248, Fax. +43 1 60 101 1210
Norway: Box 1, Manglerud 0612, OSLO,
Tel. +47 22 74 8000, Fax. +47 22 74 8341
Belarus: Hotel Minsk Business Center, Bld. 3, r. 1211, Volodarski Str. 6,
220050 MINSK, Tel. +375 172 20 0733, Fax. +375 172 20 0773
Pakistan: see Singapore
Belgium: see The Netherlands
Brazil: see South America
Philippines: Philips Semiconductors Philippines Inc.,
106 Valero St. Salcedo Village, P.O. Box 2108 MCC, MAKATI,
Metro MANILA, Tel. +63 2 816 6380, Fax. +63 2 817 3474
Bulgaria: Philips Bulgaria Ltd., Energoproject, 15th floor,
51 James Bourchier Blvd., 1407 SOFIA,
Tel. +359 2 68 9211, Fax. +359 2 68 9102
Poland: Al.Jerozolimskie 195 B, 02-222 WARSAW,
Tel. +48 22 5710 000, Fax. +48 22 5710 001
Portugal: see Spain
Romania: see Italy
Canada: PHILIPS SEMICONDUCTORS/COMPONENTS,
Tel. +1 800 234 7381, Fax. +1 800 943 0087
China/Hong Kong: 501 Hong Kong Industrial Technology Centre,
72 Tat Chee Avenue, Kowloon Tong, HONG KONG,
Tel. +852 2319 7888, Fax. +852 2319 7700
Russia: Philips Russia, Ul. Usatcheva 35A, 119048 MOSCOW,
Tel. +7 095 755 6918, Fax. +7 095 755 6919
Singapore: Lorong 1, Toa Payoh, SINGAPORE 319762,
Colombia: see South America
Czech Republic: see Austria
Tel. +65 350 2538, Fax. +65 251 6500
Slovakia: see Austria
Slovenia: see Italy
Denmark: Sydhavnsgade 23, 1780 COPENHAGEN V,
Tel. +45 33 29 3333, Fax. +45 33 29 3905
South Africa: S.A. PHILIPS Pty Ltd., 195-215 Main Road Martindale,
2092 JOHANNESBURG, P.O. Box 58088 Newville 2114,
Tel. +27 11 471 5401, Fax. +27 11 471 5398
Finland: Sinikalliontie 3, FIN-02630 ESPOO,
Tel. +358 9 615 800, Fax. +358 9 6158 0920
France: 51 Rue Carnot, BP317, 92156 SURESNES Cedex,
Tel. +33 1 4099 6161, Fax. +33 1 4099 6427
South America: Al. Vicente Pinzon, 173, 6th floor,
04547-130 SÃO PAULO, SP, Brazil,
Tel. +55 11 821 2333, Fax. +55 11 821 2382
Germany: Hammerbrookstraße 69, D-20097 HAMBURG,
Tel. +49 40 2353 60, Fax. +49 40 2353 6300
Spain: Balmes 22, 08007 BARCELONA,
Tel. +34 93 301 6312, Fax. +34 93 301 4107
Hungary: see Austria
Sweden: Kottbygatan 7, Akalla, S-16485 STOCKHOLM,
Tel. +46 8 5985 2000, Fax. +46 8 5985 2745
India: Philips INDIA Ltd, Band Box Building, 2nd floor,
254-D, Dr. Annie Besant Road, Worli, MUMBAI 400 025,
Tel. +91 22 493 8541, Fax. +91 22 493 0966
Switzerland: Allmendstrasse 140, CH-8027 ZÜRICH,
Tel. +41 1 488 2741 Fax. +41 1 488 3263
Indonesia: PT Philips Development Corporation, Semiconductors Division,
Gedung Philips, Jl. Buncit Raya Kav.99-100, JAKARTA 12510,
Tel. +62 21 794 0040 ext. 2501, Fax. +62 21 794 0080
Taiwan: Philips Semiconductors, 6F, No. 96, Chien Kuo N. Rd., Sec. 1,
TAIPEI, Taiwan Tel. +886 2 2134 2886, Fax. +886 2 2134 2874
Ireland: Newstead, Clonskeagh, DUBLIN 14,
Tel. +353 1 7640 000, Fax. +353 1 7640 200
Thailand: PHILIPS ELECTRONICS (THAILAND) Ltd.,
209/2 Sanpavuth-Bangna Road Prakanong, BANGKOK 10260,
Tel. +66 2 745 4090, Fax. +66 2 398 0793
Israel: RAPAC Electronics, 7 Kehilat Saloniki St, PO Box 18053,
TEL AVIV 61180, Tel. +972 3 645 0444, Fax. +972 3 649 1007
Turkey: Yukari Dudullu, Org. San. Blg., 2.Cad. Nr. 28 81260 Umraniye,
ISTANBUL, Tel. +90 216 522 1500, Fax. +90 216 522 1813
Italy: PHILIPS SEMICONDUCTORS, Via Casati, 23 - 20052 MONZA (MI),
Tel. +39 039 203 6838, Fax +39 039 203 6800
Ukraine: PHILIPS UKRAINE, 4 Patrice Lumumba str., Building B, Floor 7,
252042 KIEV, Tel. +380 44 264 2776, Fax. +380 44 268 0461
Japan: Philips Bldg 13-37, Kohnan 2-chome, Minato-ku,
TOKYO 108-8507, Tel. +81 3 3740 5130, Fax. +81 3 3740 5057
United Kingdom: Philips Semiconductors Ltd., 276 Bath Road, Hayes,
MIDDLESEX UB3 5BX, Tel. +44 208 730 5000, Fax. +44 208 754 8421
Korea: Philips House, 260-199 Itaewon-dong, Yongsan-ku, SEOUL,
Tel. +82 2 709 1412, Fax. +82 2 709 1415
United States: 811 East Arques Avenue, SUNNYVALE, CA 94088-3409,
Tel. +1 800 234 7381, Fax. +1 800 943 0087
Malaysia: No. 76 Jalan Universiti, 46200 PETALING JAYA, SELANGOR,
Tel. +60 3 750 5214, Fax. +60 3 757 4880
Uruguay: see South America
Vietnam: see Singapore
Mexico: 5900 Gateway East, Suite 200, EL PASO, TEXAS 79905,
Tel. +9-5 800 234 7381, Fax +9-5 800 943 0087
Yugoslavia: PHILIPS, Trg N. Pasica 5/v, 11000 BEOGRAD,
Middle East: see Italy
Tel. +381 11 62 5344, Fax.+381 11 63 5777
For all other countries apply to: Philips Semiconductors,
Internet: http://www.semiconductors.philips.com
International Marketing & Sales Communications, Building BE-p, P.O. Box 218,
5600 MD EINDHOVEN, The Netherlands, Fax. +31 40 27 24825
68
SCA
© Philips Electronics N.V. 1999
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Printed in The Netherlands
135002/1160/03/pp8
Date of release: December 1998
Document order number: 9397 750 06619
WWW.ALLDATASHEET.COM
Copyright © Each Manufacturing Company.
All Datasheets cannot be modified without permission.
This datasheet has been download from :
www.AllDataSheet.com
100% Free DataSheet Search Site.
Free Download.
No Register.
Fast Search System.
www.AllDataSheet.com
相关型号：
©2020 ICPDF网 联系我们和版权申明