BAS521,135 [NXP]
BAS521 - Single high-voltage switching diode SOD 2-Pin;型号: | BAS521,135 |
厂家: | NXP |
描述: | BAS521 - Single high-voltage switching diode SOD 2-Pin PC 光电二极管 |
文件: | 总11页 (文件大小:97K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
BAS521
Single high-voltage switching diode
Rev. 2 — 5 November 2010
Product data sheet
1. Product profile
1.1 General description
Single high-voltage switching diode, fabricated in planar technology, and encapsulated in
a SOD523 (SC-79) ultra small Surface-Mounted Device (SMD) plastic package.
1.2 Features and benefits
High switching speed: trr ≤ 50 ns
High reverse voltage: VR ≤ 300 V
Repetitive peak forward current: IFRM ≤ 1 A
Ultra small SMD plastic package
AEC-Q101 qualified
1.3 Applications
High-speed switching
High-voltage switching
1.4 Quick reference data
Table 1.
Quick reference data
Parameter
Symbol
Conditions
Min
Typ
Max
250
300
50
Unit
mA
V
[1]
[2]
IF
forward current
Tsp ≤ 90 °C
-
-
-
-
VR
trr
reverse voltage
-
reverse recovery time
16
ns
[1] Tsp is the solder point temperature at the soldering point of the cathode tab.
[2] When switched from IF = 30 mA to IR = 30 mA; RL = 100 Ω; measured at IR = 3 mA.
BAS521
NXP Semiconductors
Single high-voltage switching diode
2. Pinning information
Table 2.
Pinning
Pin
1
Description
cathode
Simplified outline
Graphic symbol
[1]
2
anode
2
1
1
2
006aab040
[1] The marking bar indicates the cathode.
3. Ordering information
Table 3.
Ordering information
Type number
Package
Name
Description
Version
BAS521
SC-79
plastic surface-mounted package; 2 leads
SOD523
4. Marking
Table 4.
Marking codes
Type number
Marking code
BAS521
L4
5. Limiting values
Table 5.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
VR
Parameter
Conditions
Min
Max
300
300
Unit
V
reverse voltage
-
-
VRRM
repetitive peak reverse
voltage
V
[1]
IF
forward current
Tsp ≤ 90 °C
250
1
mA
A
IFRM
repetitive peak forward
current
tp = 1 ms;
δ = 0.25
-
-
[2]
IFSM
non-repetitive peak forward square wave;
4.5
A
current
tp = 1 μs
[1][3]
Ptot
Tj
total power dissipation
junction temperature
ambient temperature
storage temperature
Tsp ≤ 90 °C
-
500
mW
°C
-
150
Tamb
Tstg
−65
−65
+150
+150
°C
°C
[1] Tsp is the solder point temperature at the soldering point of the cathode tab.
[2] Tj = 25 °C prior to surge.
[3] Reflow soldering is the only recommended soldering method.
BAS521
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 2 — 5 November 2010
2 of 11
BAS521
NXP Semiconductors
Single high-voltage switching diode
6. Thermal characteristics
Table 6.
Symbol
Rth(j-a)
Thermal characteristics
Parameter
Conditions
Min
Typ
Max Unit
[1][2]
[3]
thermal resistance from
junction to ambient
in free air
-
-
500
K/W
Rth(j-sp)
thermal resistance from
junction to solder point
-
-
120
K/W
[1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
[2] Reflow soldering is the only recommended soldering method.
[3] Soldering point of cathode tab.
7. Characteristics
Table 7.
Characteristics
Tamb = 25 °C unless otherwise specified.
Symbol Parameter Conditions
Min
Typ
Max Unit
VBR
VF
IR
breakdown voltage
IR = 100 μA
IF = 100 mA
VR = 250 V
300
340
-
V
[1]
forward voltage
reverse current
-
-
-
0.95 1.1
V
30
40
150
100
nA
μA
VR = 250 V;
Tamb = 150 °C
Cd
trr
diode capacitance
f = 1 MHz; VR = 0 V
-
-
0.4
16
5
pF
ns
[2]
reverse recovery time
50
[1] Pulse test: tp = 300 μs; δ = 0.02.
[2] When switched from IF = 30 mA to IR = 30 mA; RL = 100 Ω; measured at IR = 3 mA.
BAS521
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 2 — 5 November 2010
3 of 11
BAS521
NXP Semiconductors
Single high-voltage switching diode
mhc618
mhc619
2
10
500
I
F
I
R
(mA)
(μA)
400
10
300
200
100
0
1
−1
10
(1) (2) (3)
−2
10
0
40
80
120
160
200
T (°C)
0
0.5
1
1.5
VF (V)
j
(1) Tamb = 150 °C
(2) Tamb = 75 °C
(3) Tamb = 25 °C
V
R = VRmax
Fig 1. Forward current as a function of forward
voltage; typical values
Fig 2. Reverse current as a function of junction
temperature; typical values
mhc620
mhc621
300
0.42
C
(pF)
d
I
F
(mA)
200
0.38
100
0.34
0.3
0
0
50
100
150
200
(°C)
0
10
20
30
40
T
V
R
(V)
amb
f = 1 MHz; Tamb = 25 °C
Fig 3. Forward current as a function of ambient
temperature; derating curve
Fig 4. Diode capacitance as a function of reverse
voltage; typical values
BAS521
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 2 — 5 November 2010
4 of 11
BAS521
NXP Semiconductors
Single high-voltage switching diode
mbg703
2
10
I
FSM
(A)
10
1
−1
10
2
3
4
1
10
10
10
10
t
p
(μs)
Based on square wave currents.
Tj = 25 °C prior to surge.
Fig 5. Non-repetitive peak forward current as a function of pulse duration; maximum values
8. Test information
t
r
t
p
t
D.U.T.
10 %
I
F
+ I
F
t
rr
R
S
= 50 Ω
SAMPLING
OSCILLOSCOPE
t
R
= 50 Ω
V = V + I × R
S
i
R
F
(1)
90 %
V
R
mga881
input signal
output signal
(1) IR = 3 mA
Fig 6. Reverse recovery time test circuit and waveforms
8.1 Quality information
This product has been qualified in accordance with the Automotive Electronics Council
(AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is
suitable for use in automotive applications.
BAS521
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 2 — 5 November 2010
5 of 11
BAS521
NXP Semiconductors
Single high-voltage switching diode
9. Package outline
0.85
0.75
0.65
0.58
1
1.65 1.25
1.55 1.15
2
0.34
0.26
0.17
0.11
Dimensions in mm
02-12-13
Fig 7. Package outline SOD523 (SC-79)
10. Packing information
Table 8.
Packing methods
The indicated -xxx are the last three digits of the 12NC ordering code.[1]
Type number Package Description
Packing quantity
3000
8000
10000
BAS521
SOD523 2 mm pitch, 8 mm tape and reel
4 mm pitch, 8 mm tape and reel
-
-315
-
-115
-
-
-
-
-135
[1] For further information and the availability of packing methods, see Section 14.
BAS521
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 2 — 5 November 2010
6 of 11
BAS521
NXP Semiconductors
Single high-voltage switching diode
11. Soldering
2.15
1.1
solder lands
solder resist
0.5 0.6
(2×) (2×)
1.2
solder paste
occupied area
Dimensions in mm
0.7
(2×)
0.8
(2×)
sod523_fr
Reflow soldering is the only recommended soldering method.
Fig 8. Reflow soldering footprint SOD523 (SC-79)
BAS521
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 2 — 5 November 2010
7 of 11
BAS521
NXP Semiconductors
Single high-voltage switching diode
12. Revision history
Table 9.
Revision history
Document ID
BAS521 v.2
Release date
Data sheet status
Change notice
Supersedes
20101105
Product data sheet
-
BAS521_1
Modifications:
• Section 1.2 “Features and benefits”: amended
• Section 8 “Test information”: added
• Figure 7: superseded by minimized package outline drawing
• Section 10 “Packing information”: added
• Section 11 “Soldering”: added
• Section 13 “Legal information”: updated
BAS521_1
20030812
Product data sheet
-
-
BAS521
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 2 — 5 November 2010
8 of 11
BAS521
NXP Semiconductors
Single high-voltage switching diode
13. Legal information
13.1 Data sheet status
Document status[1][2]
Product status[3]
Development
Definition
Objective [short] data sheet
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
Preliminary [short] data sheet Qualification
Product [short] data sheet Production
[1]
[2]
[3]
Please consult the most recently issued document before initiating or completing a design.
The term ‘short data sheet’ is explained in section “Definitions”.
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
malfunction of an NXP Semiconductors product can reasonably be expected
13.2 Definitions
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
13.3 Disclaimers
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from national authorities.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
BAS521
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 2 — 5 November 2010
9 of 11
BAS521
NXP Semiconductors
Single high-voltage switching diode
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
13.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
14. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
BAS521
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 2 — 5 November 2010
10 of 11
BAS521
NXP Semiconductors
Single high-voltage switching diode
15. Contents
1
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1
1.2
1.3
1.4
General description . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits. . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Quick reference data . . . . . . . . . . . . . . . . . . . . 1
2
Pinning information. . . . . . . . . . . . . . . . . . . . . . 2
Ordering information. . . . . . . . . . . . . . . . . . . . . 2
Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
Thermal characteristics . . . . . . . . . . . . . . . . . . 3
Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 3
Test information. . . . . . . . . . . . . . . . . . . . . . . . . 5
Quality information . . . . . . . . . . . . . . . . . . . . . . 5
Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 6
Packing information . . . . . . . . . . . . . . . . . . . . . 6
Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 8
3
4
5
6
7
8
8.1
9
10
11
12
13
Legal information. . . . . . . . . . . . . . . . . . . . . . . . 9
Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 9
Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
13.1
13.2
13.3
13.4
14
15
Contact information. . . . . . . . . . . . . . . . . . . . . 10
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2010.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 5 November 2010
Document identifier: BAS521
相关型号:
©2020 ICPDF网 联系我们和版权申明