74HCT574N [NXP]
Octal D-type flip-flop; positive edge-trigger; 3-state; 八路D - FL型IP- FL操作;正边沿触发;三态型号: | 74HCT574N |
厂家: | NXP |
描述: | Octal D-type flip-flop; positive edge-trigger; 3-state |
文件: | 总7页 (文件大小:61K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
INTEGRATED CIRCUITS
DATA SHEET
For a complete data sheet, please also download:
• The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications
• The IC06 74HC/HCT/HCU/HCMOS Logic Package Information
• The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines
74HC/HCT574
Octal D-type flip-flop; positive
edge-trigger; 3-state
December 1990
Product specification
File under Integrated Circuits, IC06
Philips Semiconductors
Product specification
Octal D-type flip-flop; positive
edge-trigger; 3-state
74HC/HCT574
The 8 flip-flops will store the state of
their individual D-inputs that meet the
set-up and hold time requirements on
the LOW-to-HIGH CP transition.
When OE is LOW, the contents of the
8 flip-flops are available at the
outputs.
When OE is HIGH, the outputs go to
the high impedance OFF-state.
Operation of the OE input does not
affect the state of the flip-flops.
FEATURES
GENERAL DESCRIPTION
• 3-state non-inverting outputs for
bus oriented applications
The 74HC/HCT574 are high-speed
Si-gate CMOS devices and are pin
compatible with low power Schottky
TTL (LSTTL). They are specified in
compliance with JEDEC standard
no. 7A.
• 8-bit positive edge-triggered
register
• Common 3-state output enable
input
The 74HC/HCT574 are octal D-type
flip-flops featuring separate D-type
inputs for each flip-flop and
non-inverting 3-state outputs for bus
oriented applications. A clock (CP)
and an output enable (OE) input are
common to all flip-flops.
• Independent register and 3-state
buffer operation
• Output capability: bus driver
• ICC category: MSI
The “574” is functionally identical to
the “564”, but has non-inverting
outputs.
The “574” is functionally identical to
the “374”, but has a different pinning.
QUICK REFERENCE DATA
GND = 0 V; Tamb = 25 °C; tr = tf = 6 ns
TYPICAL
UNIT
SYMBOL
PARAMETER
CONDITIONS
HC
HCT
tPHL/ tPLH
fmax
propagation delay CP to Qn
maximum clock frequency
input capacitance
CL = 15 pF; VCC = 5 V
14
15
76
3.5
25
ns
123
3.5
22
MHz
pF
CI
CPD
power dissipation capacitance per flip-flop
notes 1 and 2
pF
Notes
1. CPD is used to determine the dynamic power dissipation (PD in µW):
2
PD = CPD × VCC2 × fi + ∑ (CL × VCC × fo) where:
fi = input frequency in MHz
fo = output frequency in MHz
∑ (CL × VCC2 × fo) = sum of outputs
CL = output load capacitance in pF
VCC = supply voltage in V
2. For HC the condition is VI = GND to VCC
For HCT the condition is VI = GND to VCC − 1.5 V
ORDERING INFORMATION
See “74HC/HCT/HCU/HCMOS Logic Package Information”.
December 1990
2
Philips Semiconductors
Product specification
Octal D-type flip-flop; positive edge-trigger;
3-state
74HC/HCT574
PIN DESCRIPTION
PIN NO.
SYMBOL
NAME AND FUNCTION
1
OE
3-state output enable input (active LOW)
data inputs
2, 3, 4, 5, 6, 7, 8, 9
D0 to D7
GND
CP
10
ground (0 V)
11
clock input (LOW-to-HIGH, edge-triggered)
3-state flip-flop outputs
19, 18, 17, 16, 15, 14, 13, 12
20
Q0 to Q7
VCC
positive supply voltage
Fig.1 Pin configuration.
Fig.2 Logic symbol.
Fig.3 IEC logic symbol.
December 1990
3
Philips Semiconductors
Product specification
Octal D-type flip-flop; positive edge-trigger;
3-state
74HC/HCT574
FUNCTION TABLE
INPUTS
OE CP
OUTPUTS
OPERATING
MODES
INTERNAL
FLIP-FLOPS
Dn
Q0 to Q7
load and read
register
L
L
↑
↑
l
h
L
H
L
H
load register and
disable outputs
H
H
↑
↑
l
h
L
H
Z
Z
Notes
1. H = HIGH voltage level
h = HIGH voltage level one set-up time prior to the LOW-to-HIGH
CP transition
L = LOW voltage level
l = LOW voltage level on set-up time prior to the LOW-to-HIGH
CP transition
Z = HIGH impedance OFF-state
↑ = LOW-to-HIGH clock transition
Fig.4 Functional diagram.
Fig.5 Logic diagram.
December 1990
4
Philips Semiconductors
Product specification
Octal D-type flip-flop; positive edge-trigger;
3-state
74HC/HCT574
DC CHARACTERISTICS FOR 74HC
For the DC characteristics see “74HC/HCT/HCU/HCMOS Logic Family Specifications”.
Output capability: bus driver
ICC category: MSI
AC CHARACTERISTICS FOR 74HC
GND = 0 V; tr = tf = 6 ns; CL = 50 pF
Tamb (°C)
TEST CONDITIONS
74HC
SYMBOL PARAMETER
UNIT
VCC
(V)
+25
−40 to +85 −40 to +125
WAVEFORMS
min. typ. max. min. max. min. max.
tPHL/ tPLH propagation delay
CP to Qn
47
17
14
150
30
26
190
35
33
225
45
38
ns
ns
ns
ns
ns
ns
ns
2.0 Fig.6
4.5
6.0
t
t
t
PZH/ tPZL 3-state output enable
time OE to Qn
44
16
13
140
28
24
175
35
30
210
42
36
2.0 Fig.7
4.5
6.0
PHZ/ tPLZ 3-state output disable
time OE to Qn
39
14
11
125
25
21
155
31
26
190
38
32
2.0 Fig.7
4.5
6.0
THL/ tTLH output transition time
14
5
4
60
12
10
75
15
13
90
18
15
2.0 Fig.6
4.5
6.0
tW
clock pulse width
HIGH or LOW
80
16
14
14
5
4
100
20
17
120
24
20
2.0 Fig.6
4.5
6.0
tsu
set-up time
Dn to CP
60
12
10
6
2
2
75
15
13
90
18
15
2.0 Fig.8
4.5
6.0
th
hold time
Dn to CP
5
5
5
0
0
0
5
5
5
5
5
5
2.0 Fig.8
4.5
6.0
fmax
maximum clock pulse
frequency
6.0
30
35
37
112
133
4.8
24
28
4.0
20
24
MHz 2.0 Fig.6
4.5
6.0
December 1990
5
Philips Semiconductors
Product specification
Octal D-type flip-flop; positive edge-trigger;
3-state
74HC/HCT574
DC CHARACTERISTICS FOR 74HCT
For the DC characteristics see “74HC/HCT/HCU/HCMOS Logic Family Specifications”.
Output capability: bus driver
ICC category: MSI
Note to HCT types
The value of additional quiescent supply current (∆ICC) for a unit load of 1 is given in the family specifications.
To determine ∆ICC per input, multiply this value by the unit load coefficient shown in the table below.
INPUT
UNIT LOAD COEFFICIENT
Dn
0.5
OE
CP
1.25
1.5
AC CHARACTERISTICS FOR 74HCT
GND = 0 V; tr = tf = 6 ns; CL = 50 pF
Tamb (°C)
TEST CONDITIONS
74HCT
SYMBOL PARAMETER
UNIT
VCC
+25
−40 to +85 −40 to +125
WAVEFORMS
(V)
min. typ. max. min. max. min. max.
tPHL/ tPLH propagation delay
CP to Qn
18
19
16
5
33
33
28
12
41
41
35
15
50
50
42
18
ns
ns
ns
ns
ns
ns
ns
4.5 Fig.6
4.5 Fig.7
4.5 Fig.7
4.5 Fig.6
4.5 Fig.6
4.5 Fig.8
4.5 Fig.8
tPZH/ tPZL 3-state output enable
time OE to Qn
t
PHZ/ tPLZ 3-state output disable
time OE to Qn
tTHL/ tTLH output transition time
tW
clock pulse width
HIGH or LOW
16
12
5
7
20
15
5
24
18
5
tsu
th
set-up time
Dn to CP
3
hold time
Dn to CP
−1
69
fmax
maximum clock pulse
frequency
30
24
20
MHz 4.5 Fig.6
December 1990
6
Philips Semiconductors
Product specification
Octal D-type flip-flop; positive edge-trigger;
3-state
74HC/HCT574
AC WAVEFORMS
(1) HC : VM = 50%; VI = GND to VCC
.
(1) HC : VM = 50%; VI = GND to VCC
.
HCT: VM = 1.3 V; VI = GND to 3 V.
HCT: VM = 1.3 V; VI = GND to 3 V.
Fig.6 Waveforms showing the clock input (CP)
pulse width, the CP input to output (Qn)
propagation delays, the output transition
times and the maximum clock pulse
frequency.
Fig.7 Waveforms showing the 3-state enable and
disable times.
PACKAGE OUTLINES
See “74HC/HCT/HCU/HCMOS Logic Package Outlines”.
The shaded areas indicate when the input is permitted
to change for predictable output performance.
(1) HC : VM = 50%; VI = GND to VCC
.
HCT: VM = 1.3 V; VI = GND to 3 V.
Fig.8 Waveforms showing the data set-up and
hold times for Dn input to CP input.
December 1990
7
相关型号:
74HCT574PW,112
74HC(T)574 - Octal D-type flip-flop; positive edge-trigger; 3-state TSSOP2 20-Pin
NXP
74HCT574PW,118
74HC(T)574 - Octal D-type flip-flop; positive edge-trigger; 3-state TSSOP2 20-Pin
NXP
74HCT574PW-Q100,11
74HC(T)574-Q100 - Octal D-type flip-flop; positive edge-trigger; 3-state TSSOP2 20-Pin
NXP
©2020 ICPDF网 联系我们和版权申明