74HC2G17GV [NXP]
Dual non-inverting Schmitt trigger; 双非反相施密特触发器型号: | 74HC2G17GV |
厂家: | NXP |
描述: | Dual non-inverting Schmitt trigger |
文件: | 总18页 (文件大小:96K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
74HC2G17; 74HCT2G17
Dual non-inverting Schmitt trigger
Rev. 01 — 6 October 2006
Product data sheet
1. General description
The 74HC2G17; 74HCT2G17 is a high-speed Si-gate CMOS device.
The 74HC2G17; 74HCT2G17 provides two non-inverting Schmitt trigger buffers. They are
capable of transforming slowly changing input signals into sharply defined, jitter-free
output signals.
The inputs switch at different points for positive and negative-going signals. The difference
between the positive voltage VT+ and the negative voltage VT− is defined as the input
hysteresis voltage VH.
2. Features
I Wide supply voltage range from 2.0 V to 6.0 V
I Complies with JEDEC standard no. 7A
I High noise immunity
I ESD protection:
N HBM JESD22-A114-D exceeds 2000 V
N MM JESD22-A115-A exceeds 200 V
I Low power dissipation
I Balanced propagation delays
I Unlimited input rise and fall times
I Multiple package options
I Specified from −40 °C to +85 °C and −40 °C to +125 °C
3. Applications
I Wave and pulse shaper for highly noisy environments
I Astable multivibrators
I Monostable multivibrators
74HC2G17; 74HCT2G17
NXP Semiconductors
Dual non-inverting Schmitt trigger
4. Ordering information
Table 1.
Ordering information
Type number
Package
Temperature range Name
Description
Version
SOT363
SOT457
SOT363
SOT457
74HC2G17GW
74HC2G17GV
74HCT2G17GW
74HCT2G17GV
−40 °C to +125 °C
−40 °C to +125 °C
−40 °C to +125 °C
−40 °C to +125 °C
SC-88
SC-74
SC-88
SC-74
plastic surface-mounted package; 6 leads
plastic surface-mounted package (TSOP6); 6 leads
plastic surface-mounted package; 6 leads
plastic surface-mounted package (TSOP6); 6 leads
5. Marking
Table 2.
Marking
Type number
74HC2G17GW
74HC2G17GV
74HCT2G17GW
74HCT2G17GV
Marking code
HV
HV
TV
TV
6. Functional diagram
1
3
6
4
1
3
1A
2A
1Y
2Y
6
4
mnb067
mnb066
Fig 1. Logic symbol
Fig 2. IEC logic symbol
1A
1Y
2A
2Y
mnb068
Fig 3. Logic diagram
74HC_HCT2G17_1
© NXP B.V. 2006. All rights reserved.
Product data sheet
Rev. 01 — 6 October 2006
2 of 18
74HC2G17; 74HCT2G17
NXP Semiconductors
Dual non-inverting Schmitt trigger
7. Pinning information
7.1 Pinning
74HC2G17
74HCT2G17
1
2
3
6
5
4
1A
GND
2A
1Y
V
CC
2Y
001aaf201
Fig 4. Pin configuration
7.2 Pin description
Table 3.
Symbol
1A
Pin description
Pin
1
Description
data input
GND
2A
2
ground (0 V)
data input
3
2Y
4
data output
supply voltage
data output
VCC
5
1Y
6
8. Functional description
Table 4.
Function table[1]
Input
nA
L
Output
nY
L
H
H
[1] H = HIGH voltage level;
L = LOW voltage level.
74HC_HCT2G17_1
© NXP B.V. 2006. All rights reserved.
Product data sheet
Rev. 01 — 6 October 2006
3 of 18
74HC2G17; 74HCT2G17
NXP Semiconductors
Dual non-inverting Schmitt trigger
9. Limiting values
Table 5.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
Min
Max Unit
VCC
IIK
supply voltage
−0.5 +7.0
V
[1]
[1]
[1]
[1]
[1]
input clamping current
output clamping current
output current
VI < −0.5 V or VI > VCC + 0.5 V
VO < −0.5 V or VO > VCC + 0.5 V
VO = −0.5 V to VCC + 0.5 V
-
±20
±20
±25
50
mA
mA
mA
mA
mA
IOK
IO
-
-
ICC
IGND
Tstg
Ptot
supply current
-
ground current
-
−50
storage temperature
total power dissipation
−65
+150 °C
250 mW
[2]
-
[1] The minimum input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] For SC-88 and SC-74 packages: above 87.5 °C the value of Ptot derates linearly with 4.0 mW/K.
10. Recommended operating conditions
Table 6.
Symbol
Recommended operating conditions
Parameter
Conditions
Min
Typ
Max
Unit
Type 74HC2G17
VCC
VI
supply voltage
2.0
0
5.0
6.0
V
input voltage
-
VCC
VCC
+125
V
VO
output voltage
0
-
V
Tamb
ambient temperature
−40
+25
°C
Type 74HCT2G17
VCC
VI
supply voltage
4.5
0
5.0
5.5
V
input voltage
-
VCC
VCC
+125
V
VO
output voltage
0
-
V
Tamb
ambient temperature
−40
+25
°C
11. Static characteristics
Table 7.
Static characteristics for 74HC2G17
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol
Tamb = 25 °C
VOH
Parameter
Conditions
Min
Typ
Max
Unit
HIGH-level output voltage
VI = VIH or VIL
IO = −20 µA; VCC = 2.0 V
IO = −20 µA; VCC = 4.5 V
IO = −20 µA; VCC = 6.0 V
IO = −4.0 mA; VCC = 4.5 V
IO = −5.2 mA; VCC = 6.0 V
1.9
4.4
5.9
2.0
-
-
-
-
-
V
V
V
V
V
4.5
6.0
4.18
5.68
4.32
5.81
74HC_HCT2G17_1
© NXP B.V. 2006. All rights reserved.
Product data sheet
Rev. 01 — 6 October 2006
4 of 18
74HC2G17; 74HCT2G17
NXP Semiconductors
Dual non-inverting Schmitt trigger
Table 7.
Static characteristics for 74HC2G17 …continued
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
VOL
LOW-level output voltage
VI = VIH or VIL
IO = 20 µA; VCC = 2.0 V
IO = 20 µA; VCC = 4.5 V
IO = 20 µA; VCC = 6.0 V
IO = 4.0 mA; VCC = 4.5 V
IO = 5.2 mA; VCC = 6.0 V
VI = GND or VCC; VCC = 6.0 V
VI = GND or VCC; IO = 0 A;
-
-
-
-
-
-
-
0
0.1
V
0
0.1
V
0
0.1
V
0.15
0.26
0.26
±0.1
1.0
V
0.16
V
II
input leakage current
supply current
-
-
µA
µA
ICC
VCC = 6.0 V
CI
input capacitance
-
2.0
-
pF
Tamb = −40 °C to +85 °C
VOH HIGH-level output voltage
VI = VIH or VIL
IO = −20 µA; VCC = 2.0 V
IO = −20 µA; VCC = 4.5 V
IO = −20 µA; VCC = 6.0 V
IO = −4.0 mA; VCC = 4.5 V
IO = −5.2 mA; VCC = 6.0 V
VI = VIH or VIL
1.9
-
-
-
-
-
-
-
-
-
-
V
V
V
V
V
4.4
5.9
4.13
5.63
VOL
LOW-level output voltage
IO = 20 µA; VCC = 2.0 V
IO = 20 µA; VCC = 4.5 V
IO = 20 µA; VCC = 6.0 V
IO = 4.0 mA; VCC = 4.5 V
IO = 5.2 mA; VCC = 6.0 V
VI = GND or VCC; VCC = 6.0 V
VI = GND or VCC; IO = 0 A;
-
-
-
-
-
-
-
-
-
-
-
-
-
-
0.1
V
0.1
V
0.1
V
0.33
0.33
±1.0
10.0
V
V
II
input leakage current
supply current
µA
µA
ICC
VCC = 6.0 V
Tamb = −40 °C to +125 °C
VOH
HIGH-level output voltage
VI = VIH or VIL
IO = −20 µA; VCC = 2.0 V
IO = −20 µA; VCC = 4.5 V
IO = −20 µA; VCC = 6.0 V
IO = −4.0 mA; VCC = 4.5 V
IO = −5.2 mA; VCC = 6.0 V
1.9
4.4
5.9
3.7
5.2
-
-
-
-
-
-
-
-
-
-
V
V
V
V
V
74HC_HCT2G17_1
© NXP B.V. 2006. All rights reserved.
Product data sheet
Rev. 01 — 6 October 2006
5 of 18
74HC2G17; 74HCT2G17
NXP Semiconductors
Dual non-inverting Schmitt trigger
Table 7.
Static characteristics for 74HC2G17 …continued
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
VOL
LOW-level output voltage
VI = VIH or VIL
IO = 20 µA; VCC = 2.0 V
IO = 20 µA; VCC = 4.5 V
IO = 20 µA; VCC = 6.0 V
IO = 4.0 mA; VCC = 4.5 V
IO = 5.2 mA; VCC = 6.0 V
VI = GND or VCC; VCC = 6.0 V
VI = GND or VCC; IO = 0 A;
-
-
-
-
-
-
-
-
-
-
-
-
-
-
0.1
V
0.1
V
0.1
V
0.4
V
0.4
V
II
input leakage current
supply current
±1.0
20.0
µA
µA
ICC
VCC = 6.0 V
Table 8.
Static characteristics for 74HCT2G17
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol
Tamb = 25 °C
VOH
Parameter
Conditions
Min
Typ
Max
Unit
HIGH-level output voltage
VI = VIH or VIL; VCC = 4.5 V
IO = −20 µA
4.4
4.5
-
-
V
V
IO = −4.0 mA
4.18
4.32
VOL
LOW-level output voltage
VI = VIH or VIL; VCC = 4.5 V
IO = −20 µA
-
-
-
-
0
0.1
V
IO = −4.0 mA
0.15
0.26
±0.1
1.0
V
II
input leakage current
supply current
VI = GND or VCC; VCC = 5.5 V
-
-
µA
µA
ICC
VI = GND or VCC; IO = 0 A;
V
CC = 5.5 V
VI = VCC − 2.1 V;
CC = 4.5 V to 5.5 V; IO = 0 A
∆ICC
additional supply current
input capacitance
-
-
-
300
-
µA
V
CI
2.0
pF
Tamb = −40 °C to +85 °C
VOH HIGH-level output voltage
VI = VIH or VIL; VCC = 4.5 V
IO = −20 µA
4.4
-
-
-
-
V
V
IO = −4.0 mA
4.13
VOL
LOW-level output voltage
VI = VIH or VIL; VCC = 4.5 V
IO = −20 µA
-
-
-
-
-
-
-
-
0.1
V
IO = −4.0 mA
0.33
±1.0
10.0
V
II
input leakage current
supply current
VI = GND or VCC; VCC = 5.5 V
µA
µA
ICC
VI = GND or VCC; IO = 0 A;
VCC = 5.5 V
∆ICC
additional supply current
VI = VCC − 2.1 V;
-
-
375
µA
VCC = 4.5 V to 5.5 V; IO = 0 A
74HC_HCT2G17_1
© NXP B.V. 2006. All rights reserved.
Product data sheet
Rev. 01 — 6 October 2006
6 of 18
74HC2G17; 74HCT2G17
NXP Semiconductors
Dual non-inverting Schmitt trigger
Table 8.
Static characteristics for 74HCT2G17 …continued
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol
Tamb = −40 °C to +125 °C
VOH HIGH-level output voltage
Parameter
Conditions
Min
Typ
Max
Unit
VI = VIH or VIL; VCC = 4.5 V
IO = −20 µA
4.4
3.7
-
-
-
-
V
V
IO = −4.0 mA
VOL
LOW-level output voltage
VI = VIH or VIL; VCC = 4.5 V
IO = −20 µA
-
-
-
-
-
-
-
-
0.1
V
IO = −4.0 mA
0.4
V
II
input leakage current
supply current
VI = GND or VCC; VCC = 5.5 V
±1.0
20.0
µA
µA
ICC
VI = GND or VCC; IO = 0 A;
V
CC = 5.5 V
VI = VCC − 2.1 V;
CC = 4.5 V to 5.5 V; IO = 0 A
∆ICC
additional supply current
-
-
410
µA
V
12. Dynamic characteristics
Table 9.
Dynamic characteristics
Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 6.
Symbol Parameter
Conditions
25 °C
Typ Max
−40 °C to +125 °C
Unit
Min
Min
Max
Max
(85 °C) (125 °C)
74HC2G17
[1]
[2]
[3]
tpd
propagation delay
nA to nY; see Figure 5
VCC = 2.0 V; CL = 50 pF
VCC = 4.5 V; CL = 50 pF
VCC = 6.0 V; CL = 50 pF
nY; see Figure 5
-
-
-
36
12
10
115
22
-
-
-
140
27
175
34
ns
ns
ns
18
22
28
tt
transition time
VCC = 2.0 V; CL = 50 pF
VCC = 4.5 V; CL = 50 pF
VCC = 6.0 V; CL = 50 pF
VI = GND to VCC
-
-
-
-
20
7
75
15
13
-
-
-
-
-
95
19
16
-
110
22
19
-
ns
ns
ns
pF
5
CPD
power dissipation
capacitance
10
74HC_HCT2G17_1
© NXP B.V. 2006. All rights reserved.
Product data sheet
Rev. 01 — 6 October 2006
7 of 18
74HC2G17; 74HCT2G17
NXP Semiconductors
Dual non-inverting Schmitt trigger
Table 9.
Dynamic characteristics …continued
Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 6.
Symbol Parameter
Conditions
25 °C
−40 °C to +125 °C
Unit
Min
Typ Max
Min
Max
Max
(85 °C) (125 °C)
74HCT2G17
[1]
[2]
[3]
tpd
propagation delay
nA to nY; see Figure 5
VCC = 4.5 V; CL = 50 pF
nY; see Figure 5
-
21
29
-
36
45
ns
tt
transition time
VCC = 4.5 V; CL = 50 pF
VI = GND to VCC − 1.5 V
-
-
6
15
-
-
-
19
-
22
-
ns
CPD
power dissipation
capacitance
10
pF
[1] tpd is the same as tPLH and tPHL
[2] tt is the same as tTLH and tTHL
[3] CPD is used to determine the dynamic power dissipation (PD in µW).
PD = CPD × VCC2 × fi × N + Σ(CL × VCC2 × fo) where:
fi = input frequency in MHz;
fo = output frequency in MHz;
CL = output load capacitance in pF;
VCC = supply voltage in V;
N = number of inputs switching;
Σ(CL × VCC2 × fo) = sum of the outputs.
13. Waveforms
V
I
nA input
GND
V
V
M
M
t
t
PLH
PHL
V
OH
90 %
90 %
nY output
10 %
10 %
V
OL
t
t
TLH
THL
001aaf302
Measurement points are given in Table 10.
VOL and VOH are typical voltage output drop that occur with the output load.
Fig 5. The data input (nA) to output (nY) propagation delays and output transition times
Table 10. Measurement points
Type
Input
VM
Output
VM
VI
tr = tf
74HC2G17
0.5VCC
1.3 V
GND to VCC
GND to 3.0 V
6.0 ns
6.0 ns
0.5VCC
1.3 V
74HCT2G17
74HC_HCT2G17_1
© NXP B.V. 2006. All rights reserved.
Product data sheet
Rev. 01 — 6 October 2006
8 of 18
74HC2G17; 74HCT2G17
NXP Semiconductors
Dual non-inverting Schmitt trigger
V
V
CC
CC
V
V
R
= 1 kΩ
I
O
L
PULSE
GENERATOR
open
D.U.T
R
C
50 pF
T
L
mgk563
Test data is given in Table 11.
Definitions test circuit:
RL = Load resistance.
CL = Load capacitance including jig and probe capacitance.
RT = Termination resistance should be equal to output impedance Zo of the pulse generator.
Fig 6. Load circuitry for switching times
Table 11. Test data
Type
Input
Test
VI
tr, tf
6 ns
6 ns
tPHL, tPLH
open
74HC2G17
GND to VCC
GND to 3.0 V
74HCT2G17
open
14. Transfer characteristics
Table 12. Transfer characteristics
Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 6.
Symbol Parameter
Conditions
25 °C
−40 °C to +125 °C
Unit
Min
Typ Max
Min
Max
Max
(85 °C) (125 °C)
74HC2G17
VT+
VT−
VH
positive-going
threshold voltage
see Figure 7, Figure 8
VCC = 2.0 V
1.00 1.18 1.50 1.00
2.30 2.60 3.15 2.30
3.00 3.46 4.20 3.00
1.50
3.15
4.20
1.50
3.15
4.20
V
V
V
VCC = 4.5 V
VCC = 6.0 V
negative-going
threshold voltage
see Figure 7, Figure 8
VCC = 2.0 V
0.30 0.60 0.90 0.30
1.13 1.47 2.00 1.13
1.50 2.06 2.60 1.50
0.90
2.00
2.60
0.90
2.00
2.60
V
V
V
VCC = 4.5 V
VCC = 6.0 V
hysteresis voltage
VT+ − VT−; see Figure 7,
Figure 8 and Figure 9
VCC = 2.0 V
0.30 0.60 1.00 0.30
0.60 1.13 1.40 0.60
0.80 1.40 1.70 0.80
1.00
1.40
1.70
1.00
1.40
1.70
V
V
V
VCC = 4.5 V
VCC = 6.0 V
74HC_HCT2G17_1
© NXP B.V. 2006. All rights reserved.
Product data sheet
Rev. 01 — 6 October 2006
9 of 18
74HC2G17; 74HCT2G17
NXP Semiconductors
Dual non-inverting Schmitt trigger
Table 12. Transfer characteristics …continued
Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 6.
Symbol Parameter
Conditions
25 °C
−40 °C to +125 °C
Unit
Min
Typ Max
Min
Max
Max
(85 °C) (125 °C)
74HCT2G17
VT+
VT−
VH
positive-going
threshold voltage
see Figure 7 and Figure 8
VCC = 4.5 V
1.20 1.58 1.90 1.20
1.40 1.78 2.10 1.40
1.90
2.10
1.90
2.10
V
V
VCC = 5.5 V
negative-going
threshold voltage
see Figure 7 and Figure 8
VCC = 4.5 V
0.50 0.87 1.20 0.50
0.60 1.11 1.40 0.60
1.20
1.40
1.20
1.40
V
V
VCC = 5.5 V
hysteresis voltage
VT+ − VT−; see Figure 7,
Figure 8 and Figure 10
VCC = 4.5 V
0.40 0.71
0.40 0.67
-
-
0.40
0.40
-
-
-
-
V
V
VCC = 5.5 V
15. Waveforms transfer characteristics
V
T+
V
O
V
I
V
H
V
T−
V
O
V
I
mnb155
V
H
V
V
T+
T−
mnb154
VT+ and VT- limits at 70 % and 20 %.
Fig 7. Transfer characteristic
Fig 8. Definition of VT+, VT- and VH
74HC_HCT2G17_1
© NXP B.V. 2006. All rights reserved.
Product data sheet
Rev. 01 — 6 October 2006
10 of 18
74HC2G17; 74HCT2G17
NXP Semiconductors
Dual non-inverting Schmitt trigger
mna029
mna028
1.0
100
I
CC
(mA)
I
CC
(µA)
0.8
0.6
0.4
0.2
0
50
0
0
2.5
5.0
0
1.0
2.0
V (V)
I
V (V)
I
a. VCC = 2.0 V
b. VCC = 4.5 V
mna030
1.6
I
CC
(mA)
0.8
0
0
3.0
6.0
V (V)
I
c.
VCC = 6.0 V
Fig 9. Typical 74HC2G17 transfer characteristics
74HC_HCT2G17_1
© NXP B.V. 2006. All rights reserved.
Product data sheet
Rev. 01 — 6 October 2006
11 of 18
74HC2G17; 74HCT2G17
NXP Semiconductors
Dual non-inverting Schmitt trigger
mna031
mna032
2.0
3.0
I
CC
I
CC
(mA)
(mA)
2.0
1.0
1.0
0
0
0
2.5
5.0
0
3.0
6.0
V (V)
I
V (V)
I
a. VCC = 4.5 V.
b. VCC = 5.5 V.
Fig 10. Typical 74HCT2G17 transfer characteristics
16. Application information
The slow input rise and fall times cause additional power dissipation, this can be
calculated using the following formula:
Padd = fi × (tr × ∆ICC(AV) + tf × ∆ICC(AV)) × VCC where:
Padd = additional power dissipation (µW);
fi = input frequency (MHz);
tr = input rise time (ns); 10 % to 90 %;
tf = input fall time (ns); 90 % to 10 %;
∆ICC(AV) = average additional supply current (µA).
∆ICC(AV) differs with positive or negative input transitions, as shown in Figure 11 and
Figure 12.
74HC_HCT2G17_1
© NXP B.V. 2006. All rights reserved.
Product data sheet
Rev. 01 — 6 October 2006
12 of 18
74HC2G17; 74HCT2G17
NXP Semiconductors
Dual non-inverting Schmitt trigger
mna036
200
∆I
CC(AV)
(mA)
150
100
50
positive-going
edge
negative-going
edge
0
0
2.0
4.0
6.0
V
(V)
CC
Fig 11. ∆ICC(AV) as a function of VCC for 74HC2G17; linear change of VI between 0.1VCC to 0.9VCC
mna058
200
∆I
CC(AV)
(µA)
150
100
50
positive-going
edge
negative-going
edge
0
0
2
4
6
V
(V)
CC
Fig 12. ∆ICC(AV) as a function of VCC for 74HCT2G17; linear change of VI between 0.1VCC to 0.9VCC
74HC_HCT2G17_1
© NXP B.V. 2006. All rights reserved.
Product data sheet
Rev. 01 — 6 October 2006
13 of 18
74HC2G17; 74HCT2G17
NXP Semiconductors
Dual non-inverting Schmitt trigger
17. Package outline
Plastic surface-mounted package; 6 leads
SOT363
D
B
E
A
X
y
H
v
M
A
E
6
5
4
Q
pin 1
index
A
A
1
1
2
3
c
e
1
b
p
L
p
w
M B
e
detail X
0
1
2 mm
scale
DIMENSIONS (mm are the original dimensions)
A
1
UNIT
A
b
c
D
E
e
e
H
L
Q
v
w
y
p
p
1
E
max
0.30
0.20
1.1
0.8
0.25
0.10
2.2
1.8
1.35
1.15
2.2
2.0
0.45
0.15
0.25
0.15
mm
0.1
1.3
0.65
0.2
0.2
0.1
REFERENCES
JEDEC JEITA
EUROPEAN
PROJECTION
OUTLINE
VERSION
ISSUE DATE
IEC
04-11-08
06-03-16
SOT363
SC-88
Fig 13. Package outline SOT363 (SC-88)
74HC_HCT2G17_1
© NXP B.V. 2006. All rights reserved.
Product data sheet
Rev. 01 — 6 October 2006
14 of 18
74HC2G17; 74HCT2G17
NXP Semiconductors
Dual non-inverting Schmitt trigger
Plastic surface-mounted package (TSOP6); 6 leads
SOT457
D
B
E
A
X
y
H
v
M
A
E
6
5
4
Q
pin 1
index
A
A
1
c
1
2
3
L
p
e
b
p
w
M B
detail X
0
1
2 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
A
b
c
D
E
e
H
L
Q
v
w
y
p
1
p
E
0.1
0.013
0.40
0.25
1.1
0.9
0.26
0.10
3.1
2.7
1.7
1.3
3.0
2.5
0.6
0.2
0.33
0.23
mm
0.95
0.2
0.2
0.1
REFERENCES
JEDEC JEITA
EUROPEAN
PROJECTION
OUTLINE
VERSION
ISSUE DATE
IEC
05-11-07
06-03-16
SOT457
SC-74
Fig 14. Package outline SOT457 (SC-74)
74HC_HCT2G17_1
© NXP B.V. 2006. All rights reserved.
Product data sheet
Rev. 01 — 6 October 2006
15 of 18
74HC2G17; 74HCT2G17
NXP Semiconductors
Dual non-inverting Schmitt trigger
18. Abbreviations
Table 13. Abbreviations
Acronym
CMOS
ESD
Description
Complementary Metal Oxide Semiconductor
ElectroStatic Discharge
Human Body Model
HBM
MM
Machine Model
DUT
Device Under Test
19. Revision history
Table 14. Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
74HC_HCT2G17_1 20061006
Product data sheet
-
-
74HC_HCT2G17_1
© NXP B.V. 2006. All rights reserved.
Product data sheet
Rev. 01 — 6 October 2006
16 of 18
74HC2G17; 74HCT2G17
NXP Semiconductors
Dual non-inverting Schmitt trigger
20. Legal information
20.1 Data sheet status
Document status[1][2]
Product status[3]
Development
Definition
Objective [short] data sheet
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
Preliminary [short] data sheet Qualification
Product [short] data sheet Production
[1]
[2]
[3]
Please consult the most recently issued document before initiating or completing a design.
The term ‘short data sheet’ is explained in section “Definitions”.
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
malfunction of a NXP Semiconductors product can reasonably be expected to
20.2 Definitions
result in personal injury, death or severe property or environmental damage.
NXP Semiconductors accepts no liability for inclusion and/or use of NXP
Semiconductors products in such equipment or applications and therefore
such inclusion and/or use is at the customer’s own risk.
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale — NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.nxp.com/profile/terms, including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
any inconsistency or conflict between information in this document and such
terms and conditions, the latter will prevail.
20.3 Disclaimers
General — Information in this document is believed to be accurate and
reliable. However, NXP Semiconductors does not give any representations or
warranties, expressed or implied, as to the accuracy or completeness of such
information and shall have no liability for the consequences of use of such
information.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
20.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
21. Contact information
For additional information, please visit: http://www.nxp.com
For sales office addresses, send an email to: salesaddresses@nxp.com
74HC_HCT2G17_1
© NXP B.V. 2006. All rights reserved.
Product data sheet
Rev. 01 — 6 October 2006
17 of 18
74HC2G17; 74HCT2G17
NXP Semiconductors
Dual non-inverting Schmitt trigger
22. Contents
1
2
3
4
5
6
General description . . . . . . . . . . . . . . . . . . . . . . 1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Ordering information. . . . . . . . . . . . . . . . . . . . . 2
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2
7
7.1
7.2
Pinning information. . . . . . . . . . . . . . . . . . . . . . 3
Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 3
8
Functional description . . . . . . . . . . . . . . . . . . . 3
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 4
Recommended operating conditions. . . . . . . . 4
Static characteristics. . . . . . . . . . . . . . . . . . . . . 4
Dynamic characteristics . . . . . . . . . . . . . . . . . . 7
Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Transfer characteristics. . . . . . . . . . . . . . . . . . . 9
Waveforms transfer characteristics. . . . . . . . 10
Application information. . . . . . . . . . . . . . . . . . 12
Package outline . . . . . . . . . . . . . . . . . . . . . . . . 14
Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . 16
Revision history. . . . . . . . . . . . . . . . . . . . . . . . 16
9
10
11
12
13
14
15
16
17
18
19
20
Legal information. . . . . . . . . . . . . . . . . . . . . . . 17
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 17
Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 17
20.1
20.2
20.3
20.4
21
22
Contact information. . . . . . . . . . . . . . . . . . . . . 17
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2006.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 6 October 2006
Document identifier: 74HC_HCT2G17_1
相关型号:
©2020 ICPDF网 联系我们和版权申明