MSCH-07 [NTE]
MOTOR START HARDWARE; 电机起动五金型号: | MSCH-07 |
厂家: | NTE ELECTRONICS |
描述: | MOTOR START HARDWARE |
文件: | 总1页 (文件大小:561K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MOTOR START HARDWARE
MSC SERIES
CAPACITOR HARDWARE
End Cap for On−Motor Mounting
Part
Fits Case
Style
Number
Diameter (inches)
1.438
MSCH−01
MSCH−02
MSCH−03
MSCH−04
E, F, G
1.810
H, J
K
2.060
2.560
L
End Cap for Off−Motor Mounting
Part
Fits Case
Style
Number
Diameter (inches)
1.438
MSCH−05
MSCH−06
MSCH−07
MSCH−08
E, F, G
1.810
H, J
K
2.060
2.560
L
Mounting Bracket
Part
Fits Case
Style
Number
MSCH−09
MSCH−10
MSCH−11
E, F
H
G, J, K, L
END CAP MOUNTING
When assembling directly to the motor frame, the wires are brought through the bracket hole and attached to the capacitor
terminals. Types MSCH−01, 02, 03, and 04 end caps are then placed in position and the entire assembly snapped into
place.
Off−motor mounting is similarly accomplished except the MSCH−05, 06, 07, and 08 end caps should be used to provide
for leads emerging from the opposite side of the cap without going through the bracket hole.
Use NTE p/n 2W315, a 15k 2Watt bleeder resistor, for AC motor start applications to save the relay switch contacts and
capacitor, particularly in capacitor start−run applications.
NTE Electronics, Inc. Voice (973) 748−5089 FAX (973) 748−6224 http://www.nteinc.com
59
相关型号:
©2020 ICPDF网 联系我们和版权申明