LM285M-1.2X/NOPB [NSC]
1-OUTPUT TWO TERM VOLTAGE REFERENCE, 1.235V, PDSO8, LEAD FREE, SOP-8;
| 型号： | LM285M-1.2X/NOPB |
| 厂家： | 
National Semiconductor |
| 描述： | 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 1.235V, PDSO8, LEAD FREE, SOP-8 光电二极管 输出元件 |
| 文件： | 总11页 (文件大小：326K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
National Semiconductor is now part of
Texas Instruments.
Search http://www.ti.com/ for the latest technical
information and details on our current products and services.
January 30, 2008
LM185-1.2/LM285-1.2/LM385-1.2
Micropower Voltage Reference Diode
The LM185-1.2 is rated for operation over a −55°C to 125°C
temperature range while the LM285-1.2 is rated −40°C to 85°
C and the LM385-1.2 0°C to 70°C. The LM185-1.2/LM285-1.2
are available in a hermetic TO-46 package and the
LM285-1.2/LM385-1.2 are also available in a low-cost TO-92
molded package, as well as SO and SOT-23. The LM185-1.2
is also available in a hermetic leadless chip carrier package.
General Description
The LM185-1.2/LM285-1.2/LM385-1.2 are micropower 2-ter-
minal band-gap voltage regulator diodes. Operating over a
10μA to 20mA current range, they feature exceptionally low
dynamic impedance and good temperature stability. On-chip
trimming is used to provide tight voltage tolerance. Since the
LM185-1.2 band-gap reference uses only transistors and re-
sistors, low noise and good long term stability result.
Features
Careful design of the LM185-1.2 has made the device excep-
tionally tolerant of capacitive loading, making it easy to use in
almost any reference application. The wide dynamic operat-
ing range allows its use with widely varying supplies with
excellent regulation.
±1% and 2% initial tolerance
■
Operating current of 10μA to 20mA
1Ω dynamic impedance
■
■
■
■
■
■
Low temperature coefficient
The extremely low power drain of the LM185-1.2 makes it
useful for micropower circuitry. This voltage reference can be
used to make portable meters, regulators or general purpose
analog circuitry with battery life approaching shelf life.
Low voltage reference—1.235V
2.5V device and adjustable device also available
LM185-2.5 series and LM185 series, respectively
Further, the wide operating current allows it to replace older
references with a tighter tolerance part.
Connection Diagrams
T0-92
Plastic Package (Z)
SOT23
551833
* Pin 3 is attached to the Die Attach Pad (DAP) and should be connected to
Pin 2 or left floating.
551810
Bottom View
Order Number LM385M3-1.2
See NS Package Number MF03A
Order Number LM285Z-1.2,
LM285BXZ-1.2, LM285BYZ-1.2
LM385Z-1.2, LM385BZ-1.2
LM385BXZ-1.2 or LM385BYZ-1.2
See NS Package Number Z03A
SO Package
TO-46
Metal Can Package (H)
551806
Order Number LM28555M180-91.2,
LM285BXM-1.2, LM285BYM-1.2
LM385M-1.2, LM385BM-1.2
LM385BXM-1.2 or LM385BYM-1.2
See NS Package Number M08A
Bottom View
Order Number LM185H-1.2, LM185H-1.2/883,
LM185BXH-1.2, LM185BYH-1.2
LM285H-1.2 or LM285BXH-1.2
See NS Package Number H02A
© 2008 National Semiconductor Corporation
5518
www.national.com
ESD Susceptibility (Note 9)
Storage Temperature
Soldering Information
TO-92 package: 10 sec.
TO-46 package:10 sec.
SO and SOT Pkg.
Vapor phase (60 sec.)
Infrared (15 sec.)
See AN-450 “Surface Mounting Methods and Their Effect
on Product Reliability” for other methods of soldering
surface mount devices.
2kV
Absolute Maximum Ratings (Note 1)
−55°C to +150°C
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
260°C
300°C
(Note 2)
Reverse Current
Forward Current
Operating Temperature Range (Note 3)
LM185-1.2
LM285-1.2
LM385-1.2
30mA
10mA
215°C
220°C
−55°C to +125°C
−40°C to +85°C
0°C to 70°C
Electrical Characteristics (Note 4)
LM185-1.2
LM185BX-1.2
LM185BY-1.2
LM285-1.2
LM385B-1.2
LM385BX-1.2
LM385BY-1.2
LM385-1.2
Units
Parameter
Conditions
Typ
LM285BX-1.2
LM285BY-1.2
(Limit)
Tested
Limit
Design
Limit
Tested
Limit
Design
Limit
Tested
Limit
Design
Limit
(Notes 5, (Note 6) (Note 5) (Note 6) (Note 5) (Note 6)
8)
Reverse Breakdown TA = 25°C,
Voltage
1.23
5
1.223
1.223
1.205
V(Min)
V(Max)
1.247
10
1.247
15
1.260
10μA ≤ IR ≤ 20mA
Minimum Operating
Current
8
20
1.5
20
20
1.5
25
15
10
1
20
15
μA
(Max)
mV
LM385M3-1.2
Reverse Breakdown
1
1
1.5
10μA ≤ IR ≤ 1mA
Voltage Change
with Current
(Max)
mV
10
20
20
25
1mA ≤ IR ≤ 20mA
IR = 100μA, f = 20Hz
IR = 100μA,
(Max)
Reverse Dynamic
Impedance
1
Ω
Wideband Noise
(rms)
60
μV
10Hz ≤ f ≤ 10kHz
Long Term Stability
IR = 100μA, T = 1000 Hr,
20
ppm
TA = 25°C ±0.1°C
Average Temperature
Coefficient (Note 7)
IR = 100μA
X Suffix
30
50
30
50
ppm/°C
ppm/°C
ppm/°C
(Max)
Y Suffix
All Others
150
150
150
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device
is intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics.
The guaranteed specifications apply only for the test conditions listed.
Note 2: Refer to RETS185H-1.2 for military specifications.
Note 3: For elevated temperature operation, Tj max is:
LM185 150°C
LM285 125°C
LM385 100°C
www.national.com
2
Thermal Resistance
JA (junction to ambient)
TO-92
180°C/W (0.4″ leads)
170°C/W (0.125″ leads)
N/A
TO-46
SO-8
SOT23
440°C/W
165°C/W
283°C/W
θ
θ
80°C/W
N/A
N/A
JC (junction to case)
Note 4: Parameters identified with boldface type apply at temperature extremes. All other numbers apply at TA = TJ = 25°C.
Note 5: Guaranteed and 100% production tested.
Note 6: Guaranteed, but not 100% production tested. These limits are not used to calculate average outgoing quality levels.
Note 7: The average temperature coefficient is defined as the maximum deviation of reference voltage at all measured temperatures between the operating
TMAX and TMIN, divided by TMAX − TMIN. The measured temperatures are −55°C, −40°C, 0°C, 25°C, 70°C, 85°C, 125°C.
Note 8: A military RETS electrical specification is available on request.
Note 9: The human body model is a 100 pF capacitor discharged through a 1.5 kΩ resistor into each pin.
Typical Performance Characteristics
Reverse Characteristics
Reverse Characteristics
551813
551814
Forward Characteristics
Temperature Drift of 3
Representative Units
551815
551816
3
www.national.com
Reverse Dynamic Impedance
Reverse Dynamic Impedance
551818
551817
Noise Voltage
Filtered Output Noise
551820
551819
Response Time
551821
Micropower Reference
from 9V Battery
Typical Applications
Wide Input
Range Reference
551822
Reference from
551808
www.national.com
4
*IQ ≃20μA standby current
1.5V Battery
Precision 1μA to 1mA Current Sources
551823
Micropower* 5V Regulator
551826
551824
*IQ ≃ 30μA
Micropower* 10V Reference
551827
551825
5
www.national.com
METER THERMOMETERS
0°C−100°C Thermometer
†IQ at 1.3V″500μA
IQ at 1.6V″2.4mA
Lower Power Thermometer
551829
*2N3638 or 2N2907 select for inverse HFE ″ 5
†Select for operation at 1.3V
551828
Calibration
‡IQ ≃ 600μA to 900μA
1. Short LM385-1.2, adjust R3 for IOUT= temp at 1μA/°K
2. Remove short, adjust R2 for correct reading in centigrade
Adjustment Procedure
0°F−50°F Thermometer
1. Adjust TC ADJ pot until voltage across R1 equals Kelvin temperature
multiplied by the thermocouple Seebeck coefficient.
2. Adjust zero ADJ pot until voltage across R2 equals the thermocouple
Seebeck coefficient multiplied by 273.2.
Thermocoup Seebeck R1 R2 Voltage
le
Voltage
Type
Coefficient
(μV/°C)
52.3
Across
R1
Across
R2
(Ω) (Ω)
@ 25°C
(mV)
(mV)
J
T
K
S
52 1.2
15.60
14.32
11.78
11.17
1.766
3
4k
42.8
43 1k
2
12.77
12.17
1.908
551830
Calibration
40.8
41
2
95
3Ω
15
1. Short LM385-1.2, adjust R3 for IOUT= temp at 1.8μA/°K
2. Remove short, adjust R2 for correct reading in °F
6.4
63.
4
Micropower Thermocouple Cold Junction Compensator
0Ω
Typical supply current 50μA
551831
www.national.com
6
Centigrade Thermometer
551801
Calibration
1. Adjust R1 so that V1 = temp at 1mV/°K
2. Adjust V2 to 273.2mV
†IQ for 1.3V to 1.6V battery volt-
age = 50μA to 150μA
Schematic Diagram
551807
7
www.national.com
Physical Dimensions inches (millimeters) unless otherwise noted
TO-46 Metal Can Package (H)
Order Number LM185H-1.2, LM185H-1.2/883, LM185BXH-1.2, LM185BYH-1.2, LM285H-1.2, or LM285BXH-1.2
NS Package Number H02A
SOT-23 Package (M3)
Order Number LM385M3-1.2
NS Package Number MF03A
www.national.com
8
Small Outline (SO-8) Package
Order Number LM285M-1.2, LM285BXM-1.2, LM285BYM-1.2
LM385M-1.2, LM385BM-1.2, LM385BXM-1.2, LM385BYM-1.2
NS Package Number M08A
TO-92 Plastic Package (Z)
Order Number LM285Z-1.2, LM285BXZ-1.2
LM285BYZ-1.2, LM385Z-1.2, LM385BZ-1.2
LM385BXZ-1.2 or LM385BYZ-1.2
NS Package Number Z03A
9
www.national.com
Notes
For more National Semiconductor product information and proven design tools, visit the following Web sites at:
Products
www.national.com/amplifiers
Design Support
Amplifiers
WEBENCH
www.national.com/webench
www.national.com/AU
Audio
www.national.com/audio
www.national.com/timing
www.national.com/adc
Analog University
App Notes
Clock Conditioners
Data Converters
Displays
www.national.com/appnotes
www.national.com/contacts
www.national.com/quality/green
www.national.com/packaging
Distributors
www.national.com/displays
www.national.com/ethernet
www.national.com/interface
www.national.com/lvds
Green Compliance
Packaging
Ethernet
Interface
Quality and Reliability www.national.com/quality
LVDS
Reference Designs
Feedback
www.national.com/refdesigns
www.national.com/feedback
Power Management
Switching Regulators
LDOs
www.national.com/power
www.national.com/switchers
www.national.com/ldo
LED Lighting
PowerWise
www.national.com/led
www.national.com/powerwise
Serial Digital Interface (SDI) www.national.com/sdi
Temperature Sensors
Wireless (PLL/VCO)
www.national.com/tempsensors
www.national.com/wireless
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED IN CONNECTION WITH NATIONAL SEMICONDUCTOR CORPORATION
(“NATIONAL”) PRODUCTS. NATIONAL MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ACCURACY
OR COMPLETENESS OF THE CONTENTS OF THIS PUBLICATION AND RESERVES THE RIGHT TO MAKE CHANGES TO
SPECIFICATIONS AND PRODUCT DESCRIPTIONS AT ANY TIME WITHOUT NOTICE. NO LICENSE, WHETHER EXPRESS,
IMPLIED, ARISING BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS
DOCUMENT.
TESTING AND OTHER QUALITY CONTROLS ARE USED TO THE EXTENT NATIONAL DEEMS NECESSARY TO SUPPORT
NATIONAL’S PRODUCT WARRANTY. EXCEPT WHERE MANDATED BY GOVERNMENT REQUIREMENTS, TESTING OF ALL
PARAMETERS OF EACH PRODUCT IS NOT NECESSARILY PERFORMED. NATIONAL ASSUMES NO LIABILITY FOR
APPLICATIONS ASSISTANCE OR BUYER PRODUCT DESIGN. BUYERS ARE RESPONSIBLE FOR THEIR PRODUCTS AND
APPLICATIONS USING NATIONAL COMPONENTS. PRIOR TO USING OR DISTRIBUTING ANY PRODUCTS THAT INCLUDE
NATIONAL COMPONENTS, BUYERS SHOULD PROVIDE ADEQUATE DESIGN, TESTING AND OPERATING SAFEGUARDS.
EXCEPT AS PROVIDED IN NATIONAL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, NATIONAL ASSUMES NO
LIABILITY WHATSOEVER, AND NATIONAL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY RELATING TO THE SALE
AND/OR USE OF NATIONAL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR
PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY
RIGHT.
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR
SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and
whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected
to result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform
can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness.
National Semiconductor and the National Semiconductor logo are registered trademarks of National Semiconductor Corporation. All other
brand or product names may be trademarks or registered trademarks of their respective holders.
Copyright© 2008 National Semiconductor Corporation
For the most current product information visit us at www.national.com
National Semiconductor
Americas Technical
Support Center
Email:
new.feedback@nsc.com
Tel: 1-800-272-9959
National Semiconductor Europe
Technical Support Center
Email: europe.support@nsc.com
German Tel: +49 (0) 180 5010 771
English Tel: +44 (0) 870 850 4288
National Semiconductor Asia
Pacific Technical Support Center
Email: ap.support@nsc.com
National Semiconductor Japan
Technical Support Center
Email: jpn.feedback@nsc.com
www.national.com
相关型号：
©2020 ICPDF网 联系我们和版权申明