LM119W-MLS [NSC]
IC DUAL COMPARATOR, 7000 uV OFFSET-MAX, 80 ns RESPONSE TIME, CDFP10, W10A, Comparator;
| 型号： | LM119W-MLS |
| 厂家： | 
National Semiconductor |
| 描述： | IC DUAL COMPARATOR, 7000 uV OFFSET-MAX, 80 ns RESPONSE TIME, CDFP10, W10A, Comparator 比较器 |
| 文件： | 总11页 (文件大小：332K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
May 1999
LM119/LM219/LM319
High Speed Dual Comparator
n Operates from a single 5V supply
General Description
±
n Typically 80 ns response time at 15V
n Minimum fan-out of 2 each side
The LM119 series are precision high speed dual compara-
tors fabricated on a single monolithic chip. They are de-
signed to operate over a wide range of supply voltages down
to a single 5V logic supply and ground. Further, they have
higher gain and lower input currents than devices like the
LM710. The uncommitted collector of the output stage
makes the LM119 compatible with RTL, DTL and TTL as well
as capable of driving lamps and relays at currents up to 25
mA.
n Maximum input current of 1 µA over temperature
n Inputs and outputs can be isolated from system ground
n High common mode slew rate
Although designed primarily for applications requiring opera-
tion from digital logic supplies, the LM119 series are fully
±
specified for power supplies up to 15V. It features faster re-
sponse than the LM111 at the expense of higher power dis-
sipation. However, the high speed, wide operating voltage
range and low package count make the LM119 much more
versatile than older devices like the LM711.
The LM319A offers improved precision over the standard
LM319, with tighter tolerances on offset voltage, offset cur-
rent, and voltage gain.
The LM119 is specified from −55˚C to +125˚C, the LM219 is
specified from −25˚C to +85˚C, and the LM319A and LM319
are specified from 0˚C to +70˚C.
Features
n Two independent comparators
Connection Diagram
Dual-In-Line Package
DS005705-4
Note 1: Also available per SMD# 8601401 or JM38510/10306
Top View
Order Number LM119J, LM119J/883 (Note 1),
LM219J, LM319J, LM319AM, LM319M,
LM319AN or LM319N
See NS Package Number J14A, M14A or N14A
© 1999 National Semiconductor Corporation
DS005705
www.national.com
Absolute Maximum Ratings (Note 8)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Lead Temperature
(Soldering, 10 sec.)
260˚C
260˚C
Soldering Information
Dual-In-Line Package
Soldering (10 seconds)
Small Outline Package
Total Supply Voltage
36V
36V
25V
18V
Vapor Phase (60 seconds)
215˚C
220˚C
Output to Negative Supply Voltage
Ground to Negative Supply Voltage
Ground to Positive Supply Voltage
Differential Input Voltage
Input Voltage (Note 2)
Infrared (15 seconds)
See AN-450 “Surface Mounting Methods and Their Effect
on Product Reliability” for other methods of soldering
surface mount devices.
±
5V
±
15V
ESD rating (1.5 kΩ in series with
100 pF)
Operating Temperature Range
800V
500 mW
LM119
LM219
−55˚C to 125˚C
−25˚C to 85˚C
Power Dissipation (Note 3)
Output Short Circuit Duration
Storage Temperature Range
10 sec
−65˚C to 150˚C
Electrical Characteristics (Note 4)
Parameter
Conditions
LM119/LM219
Units
Min
Typ
0.7
30
Max
4.0
75
=
Input Offset Voltage (Note 5)
Input Offset Current (Note 5)
Input Bias Current
TA 25˚C, RS ≤ 5k
mV
nA
=
TA 25˚C
=
TA 25˚C
150
40
500
nA
=
Voltage Gain
TA 25˚C (Note 7)
10
V/mV
ns
=
=
±
Response Time (Note 6)
Saturation Voltage
TA 25˚C, VS
15V
80
=
VIN ≤ −5 mV, IOUT 25 mA
=
TA 25˚C
0.75
0.2
1.5
V
=
Output Leakage Current
VIN ≥ 5 mV, VOUT 35V
=
TA 25˚C
2
7
µA
mV
nA
nA
V
Input Offset Voltage (Note 5)
Input Offset Current (Note 5)
Input Bias Current
RS ≤ 5k
100
1000
+12
3
=
=
±
±
13
Input Voltage Range
VS
15V
−12
1
V+ 5V, V
0
V
−
=
V+ ≥ 4.5V, V−
=
0
Saturation Voltage
VIN ≤ −6 mV, ISINK ≤ 3.2 mA
TA ≥ 0˚C
0.23
1
0.4
0.6
10
V
V
TA ≤ 0˚C
=
Output Leakage Current
VIN ≥ 5 mV, VOUT 35V,
V− VGND 0V
µA
=
=
±
Differential Input Voltage
Positive Supply Current
Positive Supply Current
Negative Supply Current
5
V
+
−
=
=
=
=
=
5V, V 0
TA 25˚C, V
4.3
8
mA
mA
mA
=
±
±
TA 25˚C, VS
15V
15V
11.5
4.5
=
TA 25˚C, VS
3
±
Note 2: For supply voltages less than 15V the absolute maximum input voltage is equal to the supply voltage.
Note 3: The maximum junction temperature of the LM119 is 150˚C, while that of the LM219 is 110˚C. For operating at elevated temperatures, devices in the H10
package must be derated based on a thermal resistance of 160˚C/W, junction to ambient, or 19˚C/W, junction to case. The thermal resistance of the J14 and N14
packages is 100˚C/W, junction to ambient.
=
±
Note 4: These specifications apply for V
15V, and the Ground pin at ground, and −55˚C ≤ T ≤ +125˚C, unless otherwise stated. With the LM219, however, all
A
S
temperature specifications are limited to −25˚C ≤ T ≤ +85˚C. The offset voltage, offset current and bias current specifications apply for any supply voltage from a
A
±
single 5V supply up to 15V supplies. Do not operate the device with more than 16V from ground to V
.
S
Note 5: The offset voltages and offset currents given are the maximum values required to drive the output within a volt of either supply with a 1 mA load. Thus, these
parameters define an error band and take into account the worst case effects of voltage gain and input impedance.
Note 6: The response time specified (see definitions) is for a 100 mV input step with 5 mV overdrive.
Note 7: Output is pulled up to 15V through a 1.4 kΩ resistor.
Note 8: Refer to RETS119X for LM119H/883 and LM119J/883 specifications.
www.national.com
2
Absolute Maximum Ratings
LM319A/319 (Note 8)
Storage Temperature Range
−65˚C to 150˚C
260˚C
Lead Temperature
(Soldering, 10 sec.)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Soldering Information
Dual-In-Line Package
Soldering (10 sec.)
Small Outline Package
Vapor Phase (60 sec.)
Infrared (15 sec.)
260˚C
Total Supply Voltage
36V
36V
25V
18V
Output to Negative Supply Voltage
Ground to Negative Supply Voltage
Ground to Positive Supply Voltage
Differential Input Voltage
215˚C
220˚C
See AN-450 “Surface Mounting Methods and Their Effect
on Product Reliability” for other methods of soldering
surface mount devices.
±
5V
±
Input Voltage (Note 9)
15V
500 mW
10 sec
Power Dissipation (Note 10)
Output Short Circuit Duration
Operating Temperature Range
ESD rating (1.5 kΩ in series with
100 pF)
LM319A, LM319
0˚C to 70˚C
800V
Electrical Characteristics (Note 11)
Parameter
Conditions
LM319A
LM319
Typ
2.0
Units
Min
Typ
0.5
20
Max
1.0
40
Min
Max
8.0
=
Input Offset Voltage (Note 12)
Input Offset Current (Note 12)
Input Bias Current
TA 25˚C, RS ≤ 5k
mV
nA
=
TA 25˚C
80
200
=
TA 25˚C
150
40
500
250
40
1000
nA
=
Voltage Gain
TA 25˚C (Note 14)
20
8
V/mV
ns
=
=
±
Response Time (Note 13)
Saturation Voltage
TA 25˚C, VS
15V
80
80
=
VIN ≤ −10 mV, IOUT 25 mA
=
TA 25˚C
0.75
0.2
1.5
0.75
0.2
1.5
V
=
Output Leakage Current
VIN ≥ 10 mV, VOUT 35V,
=
V
V−
GND 0V, TA 25˚C
10
10
10
10
µA
mV
nA
nA
V
=
=
Input Offset Voltage (Note 12)
Input Offset Current (Note 12)
Input Bias Current
RS ≤ 5k
300
1000
300
1200
=
=
±
±
±
13
Input Voltage Range
VS
15V
13
V+ 5V, V
0
1
3
1
3
V
−
=
V+ ≥ 4.5V, V−
0
0.3
0.4
0.3
0.4
V
=
Saturation Voltage
VIN ≤ −10 mV, ISINK ≤ 3.2 mA
±
±
5
Differential Input Voltage
Positive Supply Current
Positive Supply Current
Negative Supply Current
5
V
+
−
=
=
=
=
=
5V, V 0
TA 25˚C, V
4.3
8
4.3
8
mA
mA
mA
=
±
±
TA 25˚C, VS
15V
15V
12.5
5
12.5
5
=
TA 25˚C, VS
3
3
±
Note 9: For supply voltages less than 15 the absolute maximum input voltage is equal to the supply voltage.
Note 10: The maximum junction temperature of the LM319A and LM319 is 85˚C. For operating at elevated temperatures, devices in the H10 package must be de-
rated based on a thermal resistance of 160˚C/W, junction to ambient, or 19˚C/W, junction to case. The thermal resistance of the N14 and J14 package is 100˚C/W,
junction to ambient. The thermal resistance of the M14 package is 115˚C/W, junction to ambient.
=
±
Note 11: These specifications apply for V
15V, and 0˚C ≤ T ≤ 70˚C, unless otherwise stated. The offset voltage, offset current and bias current specifications
A
S
±
apply for any supply voltage from a single 5V supply up to 15V supplies. Do not operate the device with more than 16V from ground to V
.
S
Note 12: The offset voltages and offset currents given are the maximum values required to drive the output within a volt of either supply with a 1 mA load. Thus, these
parameters define an error band and take into account the worst case effects of voltage gain and input impedance.
Note 13: The response time specified is for a 100 mV input step with 5 mV overdrive.
Note 14: Output is pulled up to 15V through a 1.4 kΩ resistor.
3
www.national.com
Typical Performance Characteristics LM119A/LM119/LM219
Input Currents
Transfer Function
Common Mode Limits
DS005705-10
DS005705-11
DS005705-12
Response Time for Various
Input Overdrives
Response Time for Various
Input Overdrives
Input Characteristics
DS005705-15
DS005705-14
DS005705-13
Response Time for Various
Input Overdrives
Response Time for Various
Input Overdrives
Output Saturation Voltage
DS005705-18
DS005705-16
DS005705-17
www.national.com
4
Typical Performance Characteristics LM119A/LM119/LM219 (Continued)
Supply Current
Supply Current
Output Limiting
Characteristics
DS005705-20
DS005705-19
DS005705-21
Typical Performance Characteristics LM319A, LM319
Input Currents
Supply Currents
Transfer Function
DS005705-22
DS005705-23
DS005705-24
Response Time for Various
Input Overdrives
Response Time for Various
Input Overdrives
Input Characteristics
DS005705-27
DS005705-25
DS005705-26
5
www.national.com
Typical Performance Characteristics LM319A, LM319 (Continued)
Response Time for Various
Input Overdrives
Response Time for Various
Input Overdrives
Output Saturation Voltage
DS005705-30
DS005705-28
DS005705-29
Supply Current
Output Limiting
Characteristics
Common Mode Limits
DS005705-31
DS005705-32
DS005705-33
www.national.com
6
Schematic Diagram
7
www.national.com
Typical Applications (Note 15)
Relay Driver
Window Detector
DS005705-5
Note 15: Pin numbers are for metal can package.
DS005705-6
=
V
OUT
5V for
V
V
V
≤ V ≤ V
IN UT
LT
=
0 for
OUT
≤ V or V ≥ V
IN
LT
IN
UT
Connection Diagrams
Metal Can Package
DS005705-9
Order Number LM119W/883
See NS Package Number W10A
DS005705-7
−
Case is connected to pin 5 (V )
Top View
Order Number LM119H, LM119H/883 (Note 1),
or LM319H
See NS Package Number H10C
www.national.com
8
Physical Dimensions inches (millimeters) unless otherwise noted
Metal Can Package (H)
Order Number LM119H, LM119H/883, LM319AH or LM319H
NS Package Number H10C
Cavity Dual-In-Line Package (J)
Order Number LM119J, LM119J/883, LM219J, LM319AJ or LM319J
NS Package Number J14A
9
www.national.com
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
Dual-In-Line Package (M)
Order Number LM319AM or LM319M
NS Package Number M14A
Molded Dual-In-Line Package (N)
Order Number LM319AN or LM319N
NS Package Number N14A
www.national.com
10
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
Order Number LM119W/883, LM119WG/883
NS Package Number W10A, WG10A
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and
whose failure to perform when properly used in
accordance with instructions for use provided in the
labeling, can be reasonably expected to result in a
significant injury to the user.
2. A critical component is any component of a life
support device or system whose failure to perform
can be reasonably expected to cause the failure of
the life support device or system, or to affect its
safety or effectiveness.
National Semiconductor
Corporation
Americas
Tel: 1-800-272-9959
Fax: 1-800-737-7018
Email: support@nsc.com
National Semiconductor
Europe
National Semiconductor
Asia Pacific Customer
Response Group
Tel: 65-2544466
Fax: 65-2504466
National Semiconductor
Japan Ltd.
Tel: 81-3-5639-7560
Fax: 81-3-5639-7507
Fax: +49 (0) 1 80-530 85 86
Email: europe.support@nsc.com
Deutsch Tel: +49 (0) 1 80-530 85 85
English Tel: +49 (0) 1 80-532 78 32
Français Tel: +49 (0) 1 80-532 93 58
Italiano Tel: +49 (0) 1 80-534 16 80
Email: sea.support@nsc.com
www.national.com
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
相关型号：
©2020 ICPDF网 联系我们和版权申明