DS96173CN [NSC]
RS-485/RS-422 Quad Differential Line Receivers; RS - 485 / RS - 422四路差动线路接收器
| 型号： | DS96173CN |
| 厂家： | 
National Semiconductor |
| 描述： | RS-485/RS-422 Quad Differential Line Receivers |
| 文件： | 总6页 (文件大小：177K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
June 1998
DS96173/DS96175
RS-485/RS-422 Quad Differential Line Receivers
General Description
Features
n Meets EIA Standard RS-485, RS-422A, RS-423A
n Designed for multipoint bus applications
n TRI-STATE Outputs
The DS96173 and DS96175 are high speed quad differential
line receivers designed to meet EIA Standard RS-485. The
devices have TRI-STATE® outputs and are optimized for bal-
anced multipoint data bus transmission at rates up to 10
Mbps. The receivers feature high input impedance, input
hysteresis for increased noise immunity, and input sensitivity
of 200 mV over a common mode input voltage range of −7V
to +12V. The receivers are therefore suitable for multipoint
applications in noisy environments. The DS96173 features
an active high and active low Enable, common to all four re-
ceivers. The DS96175 features separate active high Enables
for each receiver pair. Compatible RS-485 drivers, transceiv-
ers, and repeaters are also offered to provide optimum bus
performance. The respective device types are DS96172,
DS96174, DS96176 and DS96177.
n Common mode input voltage range: −7V to +12V
n Operates from single +5V supply
n Input sensitivity of 200 mV over common mode range
n Input hysteresis of 50 mV typical
n High input impedance
n DS96173/DS96175 are lead and function compatible
with SN75173/75175 or the AM26LS32/MC3486
respectively
±
Connection Diagrams
16-Lead DIP
DS96173
16-Lead DIP
DS96175
DS009628-1
DS009628-2
Order Number DS96173CN or DS96175CN
See NS Package Number N16E
TRI-STATE® is a registered trademark of National Semiconductor Corporation.
© 1998 National Semiconductor Corporation
DS009628
www.national.com
Absolute Maximum Ratings (Note 2)
Low Level Output Current
50 mA
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Recommended Operating
Conditions
Storage Temperature Range
Min
4.75
−7
Typ
Max
5.25
+12
Units
Molded DIP
−65˚C to +150˚C
Supply Voltage (VCC
Common Mode Input
Voltage (VCM
Differential Input
Voltage (VID
Output Current High (IOH
Output Current LOW (IOL
Operating Temperature (TA)
)
5
V
V
Lead Temperature
Molded DIP (soldering, 10
sec.)
)
265˚C
−7
+12
V
Maximum Power Dissipation (Note 1) at 25˚C
N-Molded Package
)
1.84W
7V
)
−400
16
µA
mA
˚C
Supply Voltage
)
±
±
Input Voltage, A or B Inputs
Differential Input Voltage
Enable Input Voltage
25V
25V
7V
0
25
70
Note 1: Derate molded DIP package 15 mW/˚C above 25˚C.
Electrical Characteristics (Notes 3, 4)
over recommended temperature, common mode input voltage, and supply voltage ranges, unless otherwise specified
Symbol
VTH
Parameter
Differential Input
Conditions
Min
−0.2
2.0
Typ
Max
Units
VO = 2.7V, IO = − 0.4 mA
0.2
V
High Threshold Voltage
Differential Input (Note 5)
Low Threshold Voltage
Hysteresis (Note 6)
VTL
VO = 0.5V, IO = 16 mA
VCM = 0V
V
VT+ − VT−
VIH
50
mV
V
Enable Input Voltage HIGH
Enable Input Voltage LOW
Enable Input Clamp Voltage
Output Voltage HIGH
VIL
0.8
V
VIC
II = −18 mA
−1.5
V
VOH
VID = 200 mV, IOH = −400 µA
2.7
V
VOL
Output Voltage LOW
VID = −200 mV
IOL = 8 mA
0.45
0.50
V
IOL = 16 mA
±
IOZ
II
High Impedance State Output
Line Input Current (Note 7)
VO = 0.4V to 2.4V
Other Input = 0V
20
µA
VI = 12V
VI = −7V
1.0
−0.8
20
mA
IIH
IIL
Enable Input Current HIGH
Enable Input Current LOW
Input Resistance
VIH = 2.7V
VIL = 0.4V
µA
µA
−100
RI
12
kΩ
mA
mA
IOS
ICC
Short Circuit Output Current
Supply Current
(Note 8)
−15
−85
75
Outputs Disabled
Note 2: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices
should be operated at these limits. The tables of “Electrical Characteristics” provide conditions for actual device operation.
Note 3: Unless otherwise specified Min/Max limits apply across the 0˚C to +70˚C range for the DS96173/DS96175. All typicals are given for V = 5V and T = 25˚C.
CC
A
Note 4: All currents into the device pins are positive; all currents out of the device pins are negative. All voltages are reference to ground unless otherwise specified.
Note 5: The algebraic convention, when the less positive (more negative) limit is designated minimum, is used in this data sheet for common mode input voltage
and threshold voltage levels only.
Note 6: Hysteresis is the difference between the positive-going input threshold voltage, V , and the negative going input threshold voltage, V
.
T−
T+
Note 7: Refer to EIA Standards RS-485 for exact conditions.
Note 8: Only one output at a time should be shorted.
www.national.com
2
Switching Characteristics
VCC = 5V, TA = 25˚C
Symbol
Parameter
Conditions
VID = −2.5V to 2.5V,
CL = 15 pF, Figure 1
Min
Typ
Max
Units
tPLH
Propagation Delay Time,
15
25
ns
Low to High Level Output
tPHL
Propagation Delay Time,
15
25
ns
High to Low Level Output
tPZH
tPZL
tPHZ
tPLZ
Output Enable Time to High Level
Output Enable Time to Low Level
Output Disable Time from High Level
Output Disable Time from Low Level
CL = 15 pF, Figure 2
CL = 15 pF, Figure 3
CL = 5 pF, Figure 2
CL = 5 pF, Figure 3
15
15
14
24
22
22
30
40
ns
ns
ns
ns
Function Tables
(Each Receiver) DS96173
Differential Inputs
A–B
Enables
Outputs
E
E
X
L
V
H
H
L
>
VID 0.2V
H
X
H
X
L
<
VID −0.2V
X
L
L
X
X
X
H
Z
Z
X
H = High Level
L = Low Level
X = Immaterial
Z = High Impedance (off)
(Each Receiver) DS96175
Differential Inputs
A–B
Enable
Output
Y
H
L
VID ≥ 0.2V
VID ≤ −0.2V
X
H
H
L
Z
Parameter Measurement Information
DS009628-4
DS009628-3
FIGURE 1. tPLH, tPHL (Note 11)
3
www.national.com
Parameter Measurement Information (Continued)
DS009628-6
DS009628-5
FIGURE 2. tPHZ, tPZH (Note 11)
DS009628-8
DS009628-7
FIGURE 3. tPZL, tPLZ (Note 11)
Note 9: The input pulse is supplied by a generator having the following characteristics: PRR = 1.0 MHz, 50% duty cycle, t ≤ 6.0 ns, t ≤ 6.0 ns, Z = 50Ω.
r
f
O
Note 10:
C includes probe and stray capacitance.
L
Note 11: DS96173 with active high and active low Enables is shown here. DS96175 has active high Enable only.
Note 12: All diodes are 1N916 or equivalent.
Note 13: To test the active low Enable E of DS96173, ground E and apply an inverted input waveform to E . DS96175 has active high Enable only.
Typical Application
DS009628-9
Note: The line length should be terminated at both ends in its characteristic impedance. Stub lengths off the main line should be kept as short as possible.
FIGURE 4.
www.national.com
4
5
Physical Dimensions inches (millimeters) unless otherwise noted
Molded Dual-In-Line Package (N)
Order Number DS96173CN or DS96175CN
NS Package Number N16E
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DE-
VICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMI-
CONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or sys-
tems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, and whose fail-
ure to perform when properly used in accordance
with instructions for use provided in the labeling, can
be reasonably expected to result in a significant injury
to the user.
2. A critical component in any component of a life support
device or system whose failure to perform can be rea-
sonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
National Semiconductor
Corporation
Americas
Tel: 1-800-272-9959
Fax: 1-800-737-7018
Email: support@nsc.com
National Semiconductor
Europe
National Semiconductor
Asia Pacific Customer
Response Group
Tel: 65-2544466
Fax: 65-2504466
National Semiconductor
Japan Ltd.
Tel: 81-3-5620-6175
Fax: 81-3-5620-6179
Fax: +49 (0) 1 80-530 85 86
Email: europe.support@nsc.com
Deutsch Tel: +49 (0) 1 80-530 85 85
English Tel: +49 (0) 1 80-532 78 32
Français Tel: +49 (0) 1 80-532 93 58
Italiano Tel: +49 (0) 1 80-534 16 80
Email: sea.support@nsc.com
www.national.com
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
相关型号：
©2020 ICPDF网 联系我们和版权申明