NSVS1105 [NJRC]

SAW Filter, 1 Function(s), 422.2MHz,;


型号：	NSVS1105
厂家：	NEW JAPAN RADIO
描述：	SAW Filter, 1 Function(s), 422.2MHz, LTE
文件：	总4页 (文件大小：76K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

NSVS1105 Jan-04

JRC SAW FILTER

NSVS1105

Application

422.2MHz SAW FILTER

Electrical Specification: (Table 1)

The device characteristics are measured in the circuit shown in Fig.1.

Table 1. Electrical Specifications

Item

Spec.

50Ω

Input and Output Impedance

Nominal Center Frequency (f0)

422.2MHz

3.5dB max.

1.5dB max.

2.5 max.

50dB min.

45dB min.

Insertion Loss

421.7~422.7MHz

Response Variation

Input and Output VSWR

Out of Band Rejection

(Relative to Through Level)

421.7~422.7MHz

400.8 MHz

443.6 MHz

Temperature Range: -10~+60ºC

Maximum Rating: (Table 2)

Table 2. Maximum Ratings

Item

Rating

Maximum Input Power

Maximum DC Voltage

Operating Temperature Range

Storage Temperature

+20dBm

7.5V

-10~+60ºC

-20~+70ºC

Mechanical Specifications: (Fig.2)

Package is designed as small as 3.0x3.0x1.15[mm³] for SMD (Surface Mount Device) type.

Notice:

This part is electrostatic discharge sensitive and may be damaged by improper handling.

Communications Equipment Division

Communications Equipment Marketing Department

10-1 Nishi-Shinjuku 6-chome, Shinjuku-ku,

Tokyo. 160-8328 Japan

Tel. +81 3-3348-3845

Fax. +81 3-3348-3935

http://www.jrc.co.jp/jp/product/device/saw/index.html (Japanese)

http://www.jrc.co.jp/eng/product/comm/device/saw/saw_top_e.html (English)

NSVS1105 Jan-04

OUT

50Ω

2 SAW5

Fig.1 Measuring circuit

( ２)

3.0 ±0.15

( １)

( ３)

４２０

ＸＤ

( ４)

マーキング方法・・・レーザーマーカー

表示内容

( １) 製造年（西暦の下１ｹﾀ）

( ２) 製造月

(0.6)

但し 10 月 …X

11 月 …Y

12 月 …Z

３

４

( ３) 製造日

但し 1 ～9 日 …0

10 ～19 日 …1

２

１

20 ～31 日 …2

５

６

( ４) 品種種別記号

(1.8)

Ｎo.

１

接

続

ＧＮＤ

(0.75)

(0.45)

２

ＩＮ／ＯＵＴ

ＧＮＤ

Fig.2 Package dimensions ^](in mm)

3.8

３

４

５

６

ＧＮＤ

ＯＵＴ／ＩＮ

ＧＮＤ

2.2

1.15

Fig.3 Desirable land area (in mm)

NSVS1105 Jan-04

Notice

1. Use this component within operating temperature range. It might not be

satisfied with electrical specification without operating temperature range.

When it is used less than -10ºC or more than +60ºC, it might be a cause of

degradation or destruction of the component. Even if it endures during a short

time, it causes degradation of qualification.

2. When soldering iron is used, solder with the temperature at the tip of soldering

iron: 350ºC max., the time of soldering: 10 seconds max., the power of

soldering iron: 30W max..

3. Notice that the allowed time of soldering with soldering iron is accumulated

time, when soldering is repeated.

4. As rapid temperature change for cleaning after reflow soldering might be a

cause of destruction clean this component after confirming that temperature of

this component goes down to room temperature.

5. Confirm that there are not any influence for qualification to this component in

mounting on PCB when this component is cleaned.

6. As it might be a cause of degradation of destruction to apply static electricity to

this component, do not apply static electricity or excessive voltage while

assembling and measuring. And do not transport this component with bare

hand.

7. As it might be a cause of degradation or destruction to apply D.C. voltage

between each terminal, apply D.C. voltage 7.5V max. in actual circuit.

Note

1. This specification specifies the quality of this component as a single unit. Make

sure that this component is evaluated and confirmed against this specification

when it is mounted to your products.

422.2MHz SAW Filter

FREQUENCY CHARACTERISTICS

372.2 382.2 392.2 402.2 412.2 422.2 432.2 442.2 452.2 462.2 472.2

Frequency [ MHz]

S11

S22

S11

S22

412.2 416.2 420.2 424.2 428.2 432.2

Frequency [MHz]

412.2 416.2 420.2 424.2 428.2 432.2

Frequency [MHz]

相关型号：