NESB007T [NICHIA]
Visible LED;型号: | NESB007T |
厂家: | NICHIA CORPORATION |
描述: | Visible LED |
文件: | 总13页 (文件大小:393K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
No. STSE-CC4052A
<Cat.No.040709>
SPECIFICATIONS FOR NICHIA CHIP TYPE BLUE LED
MODEL : NESB007T
NICHIA CORPORATION
Nichia STSE-CC4052A
<Cat.No.040709>
1.SPECIFICATIONS
(1) Absolute Maximum Ratings
Item
(Ta=25°C)
Unit
Symbol
IF
Absolute Maximum Rating
Forward Current
15
mA
Pulse Forward Current
Reverse Voltage
Power Dissipation
Operating Temperature
Storage Temperature
Soldering Temperature
IFP
VR
PD
Topr
Tstg
Tsld
50
5
60
mA
mA
mW
°C
-40 ~ + 85
-40 ~ +100
Reflow Soldering : 260°C
Hand Soldering : 350°C
°C
for 10sec.
for 3sec.
<
IFP Conditions
:
Pulse Width 10msec. and Duty 1/10
=
=
(2) Initial Electrical/Optical Characteristics
Item Symbol Condition
Forward Voltage
(Ta=25°C)
Min.
-
-
104
75
52
Typ.
3.6
-
126
89
Max.
4.0
50
150
104
75
Unit
V
µA
mcd
mcd
mcd
VF
IR
Iv
Iv
Iv
IF=10[mA]
VR= 5[V]
Reverse Current
Rank S
Rank R
Rank Q
IF=10[mA]
IF=10[mA]
IF=10[mA]
Luminous Intensity
63
ꢀLuminous Intensity Measurement allowance is ± 10%.
Color Rank
(IF=10mA,Ta=25°C)
Rank W
x
y
0.11
0.04
0.11
0.10
0.15
0.10
0.15
0.04
ꢀColor Coordinates Measurement allowance is ± 0.01.
ꢀOne delivery will include up to one color rank and three luminous intensity ranks of the products.
The quantity-ratio of the ranks is decided by Nichia.
2.TYPICAL INITIAL OPTICAL/ELECTRICAL CHARACTERISTICS
Please refer to figure’s page.
3.OUTLINE DIMENSIONS AND MATERIALS
Please refer to figure’s page.
Material as follows ;
Package
Encapsulating Resin :
Electrodes
:
Heat-Resistant Polymer
Epoxy Resin (with Diffused)
Ag Plating Copper Alloy
:
-1-
Nichia STSE-CC4052A
<Cat.No.040709>
4.PACKAGING
· The LEDs are packed in cardboard boxes after taping.
Please refer to figure’s page.
The label on the minimum packing unit shows ; Part Number, Lot Number, Ranking, Quantity
· In order to protect the LEDs from mechanical shock, we pack them in cardboard boxes for transportation.
· The LEDs may be damaged if the boxes are dropped or receive a strong impact against them,
so precautions must be taken to prevent any damage.
· The boxes are not water resistant and therefore must be kept away from water and moisture.
· When the LEDs are transported, we recommend that you use the same packing method as Nichia.
5.LOT NUMBER
The first six digits number shows lot number.
The lot number is composed of the following characters;
ꢁꢂꢃꢃꢃꢃ- !ꢄ
ꢁ - Year
( 3 for 2003, 4 for 2004 )
ꢂ - Month ( 1 for Jan., 9 for Sep., A for Oct., B for Nov. )
ꢃꢃꢃꢃ - Nichia's Product Number
! - Ranking by Color Coordinates
ꢄ - Ranking by Luminous Intensity
-2-
Nichia STSE-CC4052A
<Cat.No.040709>
6.RELIABILITY
(1) TEST ITEMS AND RESULTS
Standard
Number of
Damaged
0/22
Test Item
Resistance to
Test Method
JEITA ED-4701
300 301
Test Conditions
Note
2 times
Tsld=260°C, 10sec.
Soldering Heat
(Reflow Soldering)
Solderability
(Pre treatment 30°C,70%,168hrs.)
JEITA ED-4701
300 303
JEITA ED-4701
300 307
Tsld=215 ± 5°C, 3sec.
(using flux, Lead Solder)
1 time
0/22
(Reflow Soldering)
Thermal Shock
over 95%
100 cycles
-40°C
~
100°C
0/100
1min. (10sec.) 1min.
(Pre treatment 30°C,70%,168hrs.)
-40°C ~ 25°C ~ 100°C ~ 25°C
30min. 5min. 30min. 5min.
25°C ~ 65°C ~ -10°C
Temperature Cycle
JEITA ED-4701
100 105
JEITA ED-4701
200 203
JEITA ED-4701
200 201
JEITA ED-4701
100 103
100 cycles
10 cycles
1000 hrs.
1000 hrs.
1000 hrs.
1000 hrs.
1000 hrs.
1000 hrs.
1000 hrs.
1 time
0/100
0/100
0/100
0/100
0/100
0/100
0/100
0/100
0/100
0/22
Moisture Resistance Cyclic
High Temperature Storage
90%RH 24hrs./1cycle
Ta=100°C
Temperature Humidity
Storage
Low Temperature Storage
Ta=60°C, RH=90%
Ta=-40°C
JEITA ED-4701
200 202
Steady State Operating Life
ꢀꢀ
Ta=25°C, IF=15mA
Ta=85°C, IF=4.2mA
60°C, RH=90%, IF=4.2mA
Ta=-40°C, IF=10mA
Steady State Operating Life
of High Temperature ꢀꢀ
Steady State Operating Life
of High Humidity Heat ꢀꢀ
Steady State Operating Life
of Low Temperature ꢀꢀ
Permanence of Marking
JEITA ED-4701
500 501
Solvent : Isopropyl Alcohol
Solvent Temperature : 20 ~ 25°C
Dipping Time : 5 min.
200m/s2, 100 ~ 2000Hz (Sweep 4min.)
48min., 3directions
Vibration
Drop
JEITA ED-4701
400 403
4 times
3 times
0/10
0/10
75cm
(2) CRITERIA FOR JUDGING THE DAMAGE
Criteria for Judgement
Item
Symbol
Test Conditions
Min.
Max.
Forward Voltage
Reverse Current
Luminous Intensity
Condition 1
VF
IR
IF=10mA
VR=5V
-
-
U.S.L.*)ꢃ1.1
U.S.L.*)ꢃ2.0
IV
IF=10mA
L.S.L.**)ꢃ0.7
-
Luminous Intensity
IV
IF=10mA
L.S.L.**)ꢃ0.5
-
Condition 2 ꢀꢀ
*) U.S.L. : Upper Standard Level
**) L.S.L. : Lower Standard Level
ꢀꢀThese test items are judged by the criteria of Luminous Intensity Condition 2.
-3-
Nichia STSE-CC4052A
<Cat.No.040709>
7.CAUTIONS
(1) Moisture Proof Package
· When moisture is absorbed into the SMT package it may vaporize and expand during soldering.
There is a possibility that this can cause exfoliation of the contacts and damage to the optical
characteristics of the LEDs.
to a minimum in the package.
· The moisture proof package is made of an aluminum moisture proof bag with a zipper.
a moisture absorbent material (silica gel) is inserted into the aluminum moisture proof bag.
The silica gel changes its color from blue to pink as it absorbs moisture.
For this reason, the moisture proof package is used to keep moisture
A package of
(2) Storage
· Storage Conditions
Before opening the package :
The LEDs should be kept at 30°C or less and 90%RH or less. The LEDs should be used within a
year.
When storing the LEDs, moisture proof packaging with absorbent material (silica gel)
is recommended.
After opening the package :
The LEDs should be kept at 30°C or less and 70%RH or less.
The LEDs should be soldered
If unused LEDs remain, they should be
within 168 hours (7days) after opening the package.
stored in moisture proof packages, such as sealed containers with packages of moisture absorbent
material (silica gel). It is also recommended to return the LEDs to the original moisture proof bag
and to reseal the moisture proof bag again.
· If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage
time, baking treatment should be performed using the following conditions.
Baking treatment : more than 24 hours at 65 ± 5°C
· Nichia LED electrode sections are comprised of a silver plated copper alloy. The silver surface may be
affected by environments which contain corrosive gases and so on. Please avoid conditions which
may cause the LED to corrode, tarnish or discolor. This corrosion or discoloration may cause difficulty
during soldering operations. It is recommended that the User use the LEDs as soon as possible.
· Please avoid rapid transitions in ambient temperature, especially in high humidity environments where
condensation can occur.
(3) Heat Generation
· Thermal design of the end product is of paramount importance.
Please consider the heat generation
of the LED when making the system design. The coefficient of temperature increase per input
electric power is affected by the thermal resistance of the circuit board and density of LED placement
on the board, as well as other components. It is necessary to avoid intense heat generation and operate
within the maximum ratings given in this specification.
· The operating current should be decided after considering the ambient maximum temperature of LEDs.
-4-
Nichia STSE-CC4052A
<Cat.No.040709>
(4) Soldering Conditions
· The LEDs can be soldered in place using the reflow soldering method.
Nichia cannot make a
guarantee on the LEDs after they have been assembled using the dip soldering method.
· Recommended soldering conditions
Reflow Soldering
Lead Solder
Hand Soldering
Lead-free Solder
Pre-heat
Temperature
350°C Max.
120 ~ 150°C
180 ~ 200°C
Pre-heat time
Peak
Soldering time 3 sec. Max.
(one time only)
120 sec. Max.
240°C Max.
120 sec. Max.
260°C Max.
temperature
Soldering time
Condition
10 sec. Max.
refer to
10 sec. Max.
refer to
Temperature - profile 1. Temperature - profile 2.
(N2 reflow is recommended.)
ꢀAfter reflow soldering rapid cooling should be avoided.
[Temperature-profile (Surface of circuit board)]
Use the conditions shown to the under figure.
<1: Lead Solder>
<2: Lead-free Solder>
1~ 5°C / sec.
2.5 ~ 5°C / sec.
260°C Max.
10sec. Max.
240°C Max.
10sec. Max.
Pre-heating
Pre-heating
1~ 5°C / sec.
180 ~ 200°C
2.5 ~ 5°C / sec.
120 ~ 150°C
60sec.Max.
Above 220°C
60sec.Max.
Above 200°C
120sec.Max.
120sec.Max.
[Recommended soldering pad design]
Use the following conditions shown in the figure.
8.8
4
4
1
1
(Unit : mm)
: Solder resist
· Occasionally there is a brightness decrease caused by the influence of heat or ambient atmosphere
during air reflow. It is recommended that the User use the nitrogen reflow method.
· Repairing should not be done after the LEDs have been soldered.
When repairing is unavoidable,
a double-head soldering iron should be used. It should be confirmed beforehand whether the
characteristics of the LEDs will or will not be damaged by repairing.
· Reflow soldering should not be done more than two times.
· When soldering, do not put stress on the LEDs during heating.
· After soldering, do not warp the circuit board.
(5) Cleaning
· It is recommended that isopropyl alcohol be used as a solvent for cleaning the LEDs.
When using
other solvents, it should be confirmed beforehand whether the solvents will dissolve the package and the
resin or not.
· Do not clean the LEDs by the ultrasonic.
Freon solvents should not be used to clean the LEDs because of worldwide regulations.
When it is absolutely necessary, the influence of ultrasonic
cleaning on the LEDs depends on factors such as ultrasonic power and the assembled condition.
Before cleaning, a pre-test should be done to confirm whether any damage to the LEDs will occur.
-5-
Nichia STSE-CC4052A
<Cat.No.040709>
(6) Static Electricity
· Static electricity or surge voltage damages the LEDs.
It is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs.
· All devices, equipment and machinery must be properly grounded.
It is recommended that measures be taken against surge voltage to the equipment that mounts the LEDs.
· When inspecting the final products in which LEDs were assembled, it is recommended to check
whether the assembled LEDs are damaged by static electricity or not.
It is easy to find
static-damaged LEDs by a light-on test or a VF test at a lower current (below 1mA is recommended).
· Damaged LEDs will show some unusual characteristics such as the leak current remarkably
increases, the forward voltage becomes lower, or the LEDs do not light at the low current.
Criteria : (VF > 2.0V at IF=0.5mA)
(7) Others
· Care must be taken to ensure that the reverse voltage will not exceed the absolute maximum rating
when using the LEDs with matrix drive.
· The LED light output is strong enough to injure human eyes. Precautions must be taken to prevent
looking directly at the LEDs with unaided eyes for more than a few seconds.
· Flashing lights have been known to cause discomfort in people; you can prevent this by taking
precautions during use. Also, people should be cautious when using equipment that has had LEDs
incorporated into it.
· The LEDs described in this brochure are intended to be used for ordinary electronic equipment (such
as office equipment, communications equipment, measurement instruments and household appliances).
Consult Nichia’s sales staff in advance for information on the applications in which exceptional quality
and reliability are required, particularly when the failure or malfunction of the LEDs may directly
jeopardize life or health (such as for airplanes, aerospace, submersible repeaters, nuclear reactor
control systems, automobiles, traffic control equipment, life support systems and safety devices).
· User shall not reverse engineer by disassembling or analysis of the LEDs without having prior written
consent from Nichia. When defective LEDs are found, the User shall inform Nichia directly before
disassembling or analysis.
· The formal specifications must be exchanged and signed by both parties before large volume purchase begins.
· The appearance and specifications of the product may be modified for improvement without notice.
-6-
Nichia STSE-CC4052A
<Cat.No.040709>
ICI Chromaticity Diagram
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
520
530
540
550
560
510
500
570
580
590
600
610
620
630
490
480
W
470
460
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
x
! Color Coordinates Measurement allowance is ± 0.01.
-7-
ꢀ Forward Voltage vs.
ꢀ Forward Current vs.
ꢀ Duty Ratio vs.
Forward Current
Relative Luminosity
Allowable Forward Current
3.5
100
100
Ta=25°C
Ta=25°C
Ta=25°C
3.0
2.5
2.0
1.5
1.0
0.5
0
50
50
20
10
5
20
15
1
10
2.5 3.0 3.5 4.0 4.5 5.0
0
10 20 30 40 50 60
Forward Current IFP (mA)
1
5
10 20
50 100
Forward Voltage VF (V)
Duty Ratio (%)
ꢀ Ambient Temperature vs.
ꢀ Ambient Temperature vs.
ꢀ Ambient Temperature vs.
Forward Voltage
Relative Luminosity
Allowable Forward Current
5.0
2.0
25
20
15
10
IFP=10mA
IFP=10mA
4.6
1.0
0.5
4.2
3.8
3.4
3.0
5
4
0.2
0
2.6
-60 -40 -20 0 20 40 60 80 100
-60 -40 -20 0 20 40 60 80 100
0
20
40
60
80 100
Ambient Temperature Ta (°C)
Ambient Temperature Ta (°C)
Ambient Temperature Ta (°C)
Model
Title
No.
NESB007
CHARACTERISTICS
040628429351
NICHIA CORPORATION
ꢀ Forward Current vs.
ꢀ Spectrum
Chromaticity Coordinate (λD)
1.2
1.0
0.8
0.6
0.4
0.2
0
0.13
Ta=25°C
Ta=25°C
IF=10mA
0.11
1mA(473nm)
0.09
5mA(471nm)
10mA(470nm)
0.07
50mA(467nm)
0.05
0.03
0.10 0.12 0.14 0.16 0.18 0.20
350 400 450 500 550 600 650
Wavelength λ (nm)
x
ꢀ Ambient Temperature vs.
ꢀ Forward Current vs.
ꢀ Directivity
Dominant Wavelength
Dominant Wavelength
0°
10°
473
1.0
20°
476
30°
Ta=25°C
Ta=25°C
IFP=10mA
472
474
40°
IFP=10mA
471
470
469
468
467
466
50°
472
470
468
466
60°
70°
80°
90°
0.5
0
464
90°
60°
30°
0°
0.5
1.0
1
5
10 20
50 100
-60 -40 -20 0 20 40 60 80 100
Radiation Angle
Ambient Temperature Ta (°C)
Forward Current IFP (mA)
Model
NESB007
Title
No.
CHARACTERISTICS
040628429361
NICHIA CORPORATION
1.2
Anode
(R 0.3)
(0.9)
Cathode mark
(C 0.3)
Cathode
ITEM
PACKAGE
ENCAPSULATING RESIN
ELECTRODES
MATERIALS
Heat-Resistant Polymer
Epoxy Resin (with Diffused)
Ag Plating Copper Alloy
(0.23)
(0.35)
1
mm
Model
NxSB007
15/1
Title
No.
OUTLINE DIMENSIONS
NICHIA CORPORATION
Allow
040628429371
±0.1
Reel part
11.4±1
9±0.3
Taping part
+0
0.25±0.05
φ 180
-3
4±0.1
+0.1
-0
φ 1.5
2±0.05
Cathode mark
Label
1.44±0.1
4±0.1
φ 1+0.2
XXXX LED
TYPE NxSx007Tx
LOT XXXXXX-!!
-0
1.36±0.1
QTY
pcs
Reel End of tape
No LEDs
LEDs mounting part
No LEDs
Pull direction
Top cover
tape
Embossed carrier tape
Reel Lead Min.160mm (No LEDs is more than 40)
Reel Lead Min.400mm
Reel Lead Min.40mm (No LEDs)
3,000pcs/Reel
Unit
mm
NxSx007Tx
Model
Title
Taping is based on the JIS C 0806 : Packaging of Electronic
Components on Continuous Tapes.
TAPING DIMENSIONS
040226316602
NICHIA CORPORATION
Scale
Allow
No.
Nichia STSE-CC4052A
<Cat.No.040709>
The reel and moisture absorbent material are put in the moisture proof foil bag
and then heat sealed.
Reel
Label
NICHIA
Seal
XXXX LED
TYPE
LOT
QTY
NxSx007Tx
xxxxxx-!"
PCS
NICHIA CORPORATION
491 OKA, KAMINAKA, ANAN, TOKUSHIMA, JAPAN
Moisture proof foil bag
Moisture
absorbent material
Empty space in the box is filled
with cushion material.
Label
NICHIA
XXXX LED
Nichia LED
TYPE
RANK
QTY
NxSx007Tx
!"
PCS
NICHIA CORPORATION
491 OKA, KAMINAKA, ANAN, TOKUSHIMA, JAPAN
Packing unit
Reel/bag
1reel
Quantity/bag (pcs)
Moisture proof foil bag
3,000 MAX.
Cardboard box
Cardboard box S
Cardboard box M
Cardboard box L
Dimensions (mm)
270!280!100!4t
270!280!200!4t
270!280!300!4t
Reel/box
Quantity/box (pcs)
12,000 MAX.
30,000 MAX.
48,000 MAX.
4reel MAX.
10reel MAX.
16reel MAX.
Model
Title
NxSx007Tx
PACKING
NICHIA CORPORATION
No.
040226316612
-12-
相关型号:
©2020 ICPDF网 联系我们和版权申明