PCMF3HDMI2BA-C [NEXPERIA]
Common-mode EMI filter for differential channels with integrated bidirectional ESD protectionProduction;型号: | PCMF3HDMI2BA-C |
厂家: | Nexperia |
描述: | Common-mode EMI filter for differential channels with integrated bidirectional ESD protectionProduction |
文件: | 总17页 (文件大小:4565K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with
integrated bidirectional ESD protection
Rev. 3 — 20 May 2020
Product data sheet
1. General description
Common-mode ElectroMagnetic Interference (EMI) filters with integrated bidirectional ElectroStatic
Discharge (ESD) protection for one, two and three differential channels. The devices are designed
to provide low insertion loss for differential high-speed signals on each channel while unwanted
common-mode signals are attenuated.
Each differential channel incorporates two signal lines that are coupled by integrated coils. Diodes
provide protection to downstream components from ESD voltages up to ±15 kV on each signal line.
Table 1. Product overview
Type number
Number of channels Package Name
PCMF1HDMI2BA-C
PCMF2HDMI2BA-C
PCMF3HDMI2BA-C
1
2
3
WLCSP5
WLCSP10
WLCSP15
2. Features and benefits
•
One, two and three differential channels common-mode EMI filters with integrated ESD
protection
•
•
•
ESD protection up to ±15 kV contact discharge according to IEC 61000-4-2
Superior common-mode suppression over a wide frequency range
Superior RF performance compared to other integrated filters or discrete filters with external
ESD protection
•
•
Extremely high symmetry between line pairs
Industry-standard Wafer-Level Chip-Scale Packages: WLCSP5, 10 and 15 for smaller footprint
3. Applications
•
•
•
•
•
Smartphone, cellular and cordless phone
HDMI2.1, HDMI2.0, HDMI1.4
General-purpose downstream ESD protection for differential data lines
Tablet PC and Mobile Internet Device (MID)
MIPI M-PHY and D-PHY as used in Camera Serial Interface (CSI) and Display Serial Interface
(DSI)
Nexperia
PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
4. Pinning information
Table 2. Pinning
Pin
Symbol
Description
Simplified outline
Graphic symbol
PCMF1HDMI2BA-C (WLCSP5_2-1-2)
A1
A2
C1
C2
A1
A2
B1
C1
C2
CH1_IN+
channel 1+, external
channel 1-, external
ground channel 1
2
CH1_IN-
B1
GND_CH1
CH1_OUT+
CH1_OUT-
1
channel 1+, internal
channel 1-, internal
C
A
B
Transparent top view
WLCSP5_2-1-2
aaa-028492
B1
PCMF2HDMI2BA-C (WLCSP10_4-2-4)
A1, 3
A2, 4
C1, 3
C2, 4
A1
A2
A3
A4
B1
B2
C1
C2
C3
C4
CH1_IN+
channel 1+, external
channel 1-, external
channel 2+, external
channel 2-, external
ground channel 1
4
3
2
CH1_IN-
B2
B1
CH2_IN+
CH2_IN-
GND_CH1
GND_CH2
CH1_OUT+
CH1_OUT-
CH2_OUT+
CH2_OUT-
ground channel 2
1
B1, B2 - no internal connection
channel 1+, internal
channel 1-, internal
channel 2+, internal
channel 2-, internal
C
A
B
aaa-028493
Transparent top view
WLCSP10_4-2-4
PCMF3HDMI2BA-C (WLCSP15_6-3-6)
A1, 3, 5
A2, 4, 6
C1, 3, 5
C2, 4, 6
A1
A2
A3
A4
A5
A6
B1
B2
B3
C1
C2
C3
C4
C5
C6
CH1_IN+
channel 1+, external
channel 1-, external
channel 2+, external
channel 2-, external
channel 3+, external
channel 3-, external
ground channel 1
6
CH1_IN-
B3
B2
CH2_IN+
5
4
3
2
1
CH2_IN-
CH3_IN+
CH3_IN-
B1, B2, B3 - no internal connection
GND_CH1
GND_CH2
GND_CH3
CH1_OUT+
CH1_OUT-
CH2_OUT+
CH2_OUT-
CH3_OUT+
CH3_OUT-
aaa-028494
ground channel 2
B1
B
ground channel 3
channel 1+, internal
channel 1-, internal
channel 2+, internal
channel 2-, internal
channel 3+, internal
channel 3-, internal
C
A
Transparent top view
WLCSP15_6-3-6
©
PCMFXHDMI2BA_C_SER
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2020. All rights reserved
Product data sheet
Rev. 3 — 20 May 2020
2 / 17
Nexperia
PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
5. Ordering information
Table 3. Ordering information
Type number
Package
Name
Description
PCMF1HDMI2BA-C
PCMF2HDMI2BA-C
PCMF3HDMI2BA-C
WLCSP5 wafer level chip-size package; 5 bumps (2-1-2)
WLCSP10 wafer level chip-size package; 10 bumps (4-2-4)
WLCSP15 wafer level chip-size package; 15 bumps (6-3-6)
6. Marking
Table 4. Marking codes
Type number
Marking code
PF1A
PCMF1HDMI2BA-C
PCMF2HDMI2BA-C
PCMF3HDMI2BA-C
PF2A
PF3A
7. Limiting values
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
VI
Parameter
Conditions
Min
Max
Unit
input voltage
-4
4
V
VESD
electrostatic discharge IEC 61000-4-2, level 4;all
voltage
input pins to ground
-15
-15
15
15
kV
kV
•
•
contact discharge
air discharge
IEC 61000-4-2, level 4;all
output pins to ground
-2
2
kV
kV
A
•
•
contact discharge
air discharge
-2
2
IPPM
rated peak-pulse
current
tp = 8/20 μs
-7.5
7.5
Tstg
storage temperature
ambient temperature
-40
-40
+125
+125
°C
°C
Tamb
©
PCMFXHDMI2BA_C_SER
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2020. All rights reserved
Product data sheet
Rev. 3 — 20 May 2020
3 / 17
Nexperia
PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
8. Characteristics
8.1. Channel characteristics
Table 6. Channel characteristics
Tamb = 25 °C unless otherwise specified.
Symbol parameter
Conditions
Min
Typ
Max
Unit
RS(ch)
channel
series
single line; input
to output
-
2.2
-
Ω
resistance
Cd
diode
f = 1 MHz;
[1]
-
-
0.3
1
-
pF
nA
capacitance VI = 2.5 V
IRM
reverse
leakage
current
per line;
VI = 4 V
100
VBR
breakdown
voltage
IR = 1 mA
6
-
9
-
-
-
V
Ω
Ω
Rdyn
dynamic
resistance
TLP; positive
transient
[2]
[2]
0.29
0.29
TLP; negative
transient
-
[1] This parameter is guaranteed by design
[2] 100 ns Transmission Line Pulse (TLP); 50 Ω; pulser at 70 ns to 90 ns.
8.2. Frequency characteristics
Table 7. Frequency characteristics
Tamb = 25 °C unless otherwise specified.
Symbol Parameter
Conditions
Min
Typ
Max Unit
Differential mode: Sdd21
f-3dB
cut-off frequency
[1] -
10
-
GHz
[1] Normalized to attenuation at 1 MHz.
©
PCMFXHDMI2BA_C_SER
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2020. All rights reserved
Product data sheet
Rev. 3 — 20 May 2020
4 / 17
Nexperia
PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
aaa-029770
aaa-029771
0
0
S
(dB)
cc21
S
(dB)
dd21
-10
-2
-20
-30
-40
-4
-6
10
7
8
9
10
11
7
8
9
10
11
10
10
10
10
10
10
10
10
10
f (Hz)
f (Hz)
Fig. 1. Differential mode insertion loss; typical values Fig. 2. Common-mode insertion loss; typical values
aaa-029773
115
aaa-029772
0
Z
(Ω)
dif
S
(dB)
dd21
-20
105
Z reference
-40
-60
-80
95
Z DUT
85
44.2
44.4
44.6
44.8
t (ns)
8
9
10
11
10
10
10
10
f (Hz)
tr = 200 ps
CH1 to CH2
Fig. 3. Differential crosstalk; typical values
Fig. 4. Differential Time Domain Reflectometer (TDR)
plot; typical values
©
PCMFXHDMI2BA_C_SER
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2020. All rights reserved
Product data sheet
Rev. 3 — 20 May 2020
5 / 17
Nexperia
PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
Short cable model (SCM), no equalizer
Fig. 5. HDMI 2.1 12G FRL eye diagram, PCB with device; typical values
Short cable model (SCM), no equalizer
Fig. 6. HDMI 2.1 12G FRL eye diagram, PCB without device; typical values
©
PCMFXHDMI2BA_C_SER
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2020. All rights reserved
Product data sheet
Rev. 3 — 20 May 2020
6 / 17
Nexperia
PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
Worst cable model, 8dB
Fig. 7. HDMI 2.1 12G FRL eye diagram, PCB with device; typical values
Worst cable model, 8dB
Fig. 8. HDMI 2.1 12G FRL eye diagram, PCB without device; typical values
©
PCMFXHDMI2BA_C_SER
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2020. All rights reserved
Product data sheet
Rev. 3 — 20 May 2020
7 / 17
Nexperia
PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
Worst cable model, no equalizer
Fig. 9. HDMI 2.1 6 Gbps TMDS eye diagram, PCB with device; typical values
Worst cable model, no equalizer
Fig. 10. HDMI 2.1 6 Gbps TMDS eye diagram, PCB without device; typical values
©
PCMFXHDMI2BA_C_SER
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2020. All rights reserved
Product data sheet
Rev. 3 — 20 May 2020
8 / 17
Nexperia
PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
aaa-029774
aaa-029775
25
0
I
I
(A)
(A)
20
15
10
5
-5
-10
-15
-20
-25
0
0
4
8
12
16
-16
-12
-8
-4
0
V
(V)
V
(V)
CL
CL
Transmission Line Pulse (TLP) = 100 ns;
measured CH_IN to GND
Transmission Line Pulse (TLP) = 100 ns;
measured CH_IN to GND
Fig. 11. Dynamic resistance with positive clamping;
typical values
Fig. 12. Dynamic resistance with negative clamping;
typical values
aaa-029776
aaa-029777
60
0
I
I
(A)
(A)
40
20
0
-20
-40
-60
0
10
20
30
-30
-20
-10
0
V
(V)
V
(V)
CL
CL
Very-Fast Transmission Line Pulse
(VF-TLP) = 5 ns;
Very-Fast Transmission Line Pulse
(VF-TLP) = 5 ns;
measured CH_IN to GND
measured CH_IN to GND
Fig. 13. Dynamic resistance with positive clamping;
typical values
Fig. 14. Dynamic resistance with negative clamping;
typical values
The device uses an advanced clamping structure showing a negative dynamic resistance.
This snap-back behavior strongly reduces the clamping voltage to the system behind the ESD
protection during an ESD event. Do not connect unlimited DC current sources to the data lines to
avoid keeping the ESD protection device in snap-back state after exceeding breakdown voltage
(due to an ESD pulse for instance).
©
PCMFXHDMI2BA_C_SER
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2020. All rights reserved
Product data sheet
Rev. 3 — 20 May 2020
9 / 17
Nexperia
PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
aaa-029778
aaa-029779
8
0
-2
-4
-6
-8
I
I
(A)
(A)
6
4
2
0
0
2
4
6
8
-8
-6
-4
-2
0
V
(V)
V
(V)
CL
CL
IEC61000-4-5; tp = 8/20 μs; positive pulse
IEC61000-4-5; tp = 8/20 μs; negative pulse
Fig. 15. Dynamic resistance with positive clamping;
typical values
Fig. 16. Dynamic resistance with negative clamping;
typical values
9. Application information
The device is designed to provide high-level ESD protection for differential high-speed data line
pairs such as HDMI2.1, HDMI2.0 and HDMI1.4.
When designing the Printed-Circuit Board (PCB), give careful consideration to impedance matching
and signal coupling. Do not connect the protected signal lines to unlimited current sources like, for
example, a battery.
©
PCMFXHDMI2BA_C_SER
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2020. All rights reserved
Product data sheet
Rev. 3 — 20 May 2020
10 / 17
Nexperia
PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
10. Package outline
WLCSP5: wafer level chip-size package; 5 bumps (2-1-2)
PCMF1HDMI2BA/C
D
bump A1
index area
A
1
E
A
detail X
e
1/2 e
b
C
e
1
B1
e
B
A
2
1
2
bump A1
index area
X
0
1 mm
scale
Dimensions (mm are the original dimensions)
Unit
max 0.64 0.42 0.31 0.82 1.22
A
A
b
D
E
e
e
e
2
1
1
nom
min
mm
0.61 0.41 0.26 0.77 1.17 0.40 0.40 0.80
0.58 0.40 0.21 0.72 1.12
pcmf1hdmi2ba-c_po
Issue date
References
Outline
version
European
projection
IEC
JEDEC
JEITA
20-05-06
PCMF1HDMI2BA/C
Fig. 17. Package outline WLCSP5
©
PCMFXHDMI2BA_C_SER
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2020. All rights reserved
Product data sheet
Rev. 3 — 20 May 2020
11 / 17
Nexperia
PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
WLCSP10: wafer level chip-size package; 10 bumps (4-2-4)
PCMF2HDMI2BA/C
D
bump A1
index area
A
1
E
A
detail X
e
b
C
B
A
e
1
B1
B2
e
2
bump A1
index area
1
2
3
4
e
3
X
1/2 e
0
1 mm
scale
Dimensions (mm are the original dimensions)
Unit
max 0.64 0.42 0.31 1.62 1.22
A
A
b
D
E
e
e
e
2
e
3
1
1
nom
min
mm
0.61 0.41 0.26 1.57 1.17 0.40 0.40 0.80 0.80
0.58 0.40 0.21 1.52 1.12
pcmf2hdmi2ba-c_po
Issue date
References
Outline
version
European
projection
IEC
JEDEC
JEITA
20-05-06
PCMF2HDMI2BA/C
Fig. 18. Package outline WLCSP10
©
PCMFXHDMI2BA_C_SER
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2020. All rights reserved
Product data sheet
Rev. 3 — 20 May 2020
12 / 17
Nexperia
PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
WLCSP15: wafer level chip-size package; 15 bumps (6-3-6)
PCMF3HDMI2BA/C
D
bump A1
index area
A
1
E
A
detail X
e
1/2 e
b
C
B
A
e
1
B1
B2
B3
e
2
1
2
3
4
5
6
bump A1
index area
e
3
X
0
1 mm
scale
Dimensions (mm are the original dimensions)
Unit
max 0.64 0.42 0.31 2.42 1.22
A
A
b
D
E
e
e
e
2
e
3
1
1
nom
min
mm
0.61 0.41 0.26 2.37 1.17 0.40 0.40 0.80 0.80
0.58 0.40 0.21 2.32 1.12
pcmf3hdmi2ba-c_po
Issue date
References
Outline
version
European
projection
IEC
JEDEC
JEITA
20-05-06
PCMF3HDMI2BA/C
Fig. 19. Package outline WLCSP15
©
PCMFXHDMI2BA_C_SER
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2020. All rights reserved
Product data sheet
Rev. 3 — 20 May 2020
13 / 17
Nexperia
PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
11. Soldering
WLCSP5: Solder footprint and stencil aperture
PCMF1HDMI2BA/C
Hx
P
see
detail X
P
solder land (SL)
Hy
solder paste deposit (SP)
solder land plus solder paste
solder resist opening (SR)
occupied area
SL = SP
SR
detail X
Dimensions in mm
recommend stencil thickness: 0.1 mm
20-05-06
P
SL SP SR Hx Hy
0.40 0.25 0.25 0.325 1.00 1.40
pcmf1hdmi2ba-c_fr
Fig. 20. Soldering footprint WLCSP5 (PCMF1HDMI2BA/C)
WLCSP10: Solder footprint and stencil aperture
PCMF2HDMI2BA/C
Hx
P
see
detail X
P
solder land (SL)
Hy
solder paste deposit (SP)
solder land plus solder paste
solder resist opening (SR)
occupied area
SL = SP
SR
P1
detail X
Dimensions in mm
P1 SL SP SR Hx
recommend stencil thickness: 0.1 mm
P
Hy
20-05-06
0.40 0.80 0.25 0.25 0.325 1.80 1.40
pcmf2hdmi2ba-c_fr
Fig. 21. Soldering footprint WLCSP10 (PCMF2HDMI2BA/C)
©
PCMFXHDMI2BA_C_SER
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2020. All rights reserved
Product data sheet
Rev. 3 — 20 May 2020
14 / 17
Nexperia
PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
WLCSP15: Solder footprint and stencil aperture
PCMF3HDMI2BA/C
Hx
P
see
detail X
P
solder land (SL)
Hy
solder paste deposit (SP)
solder land plus solder paste
solder resist opening (SR)
occupied area
SL = SP
SR
P1
detail X
Dimensions in mm
recommend stencil thickness: 0.1 mm
20-05-06
P
P1
SL SP SR Hx
Hy
0.40 0.80 0.25 0.25 0.325 2.60 1.40
pcmf3hdmi2ba-c_fr
Fig. 22. Soldering footprint WLCSP15 (PCMF3HDMI2BA/C)
©
PCMFXHDMI2BA_C_SER
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2020. All rights reserved
Product data sheet
Rev. 3 — 20 May 2020
15 / 17
Nexperia
PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
12. Revision history
Table 8. Revision history
Document ID
Release
date
Data sheet status
Change
notice
Supersedes
PCMFXHDMI2BA_C_SER v.1
20200520
Product data sheet
-
-
©
PCMFXHDMI2BA_C_SER
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2020. All rights reserved
Product data sheet
Rev. 3 — 20 May 2020
16 / 17
Nexperia
PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
Contents
1. General description......................................................1
2. Features and benefits.................................................. 1
3. Applications.................................................................. 1
4. Pinning information......................................................2
5. Ordering information....................................................3
6. Marking..........................................................................3
7. Limiting values............................................................. 3
8. Characteristics..............................................................4
8.1. Channel characteristics............................................... 4
8.2. Frequency characteristics............................................4
9. Application information............................................. 10
10. Package outline........................................................ 11
11. Soldering................................................................... 14
12. Revision history........................................................16
© Nexperia B.V. 2020. All rights reserved
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release: 20 May 2020
©
PCMFXHDMI2BA_C_SER
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2020. All rights reserved
Product data sheet
Rev. 3 — 20 May 2020
17 / 17
相关型号:
PCMF3HDMI2S
Common-mode EMI filter for differential channels with integrated ESD protectionProduction
NEXPERIA
PCMF3USB30
Common-mode EMI filter for differential channels with integrated ESD protectionProduction
NEXPERIA
PCMF3USB3B
Common-mode EMI filter for differential channels with integrated bidirectional ESD protectionProduction
NEXPERIA
PCMF3USB3BA
Common-mode EMI filter for differential channels with integrated bidirectional ESD protectionProduction
NEXPERIA
PCMF3USB3S
Common-mode EMI filter for differential channels with integrated ESD protectionProduction
NEXPERIA
©2020 ICPDF网 联系我们和版权申明