NCR405U [NEXPERIA]
50 mA LED driver in SOT457Production;型号: | NCR405U |
厂家: | Nexperia |
描述: | 50 mA LED driver in SOT457Production |
文件: | 总16页 (文件大小:833K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Important notice
Dear Customer,
On 7 February 2017 the former NXP Standard Product business became a new company with the
tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic and PowerMOS
semiconductors with its focus on the automotive, industrial, computing, consumer and wearable
application markets
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use
the references to Nexperia, as shown below.
Instead of http://www.nxp.com, http://www.philips.com/ or http://www.semiconductors.philips.com/,
use http://www.nexperia.com
Instead of sales.addresses@www.nxp.com or sales.addresses@www.semiconductors.philips.com, use
salesaddresses@nexperia.com (email)
Replace the copyright notice at the bottom of each page or elsewhere in the document, depending on
the version, as shown below:
- © NXP N.V. (year). All rights reserved or © Koninklijke Philips Electronics N.V. (year). All rights
reserved
Should be replaced with:
- © Nexperia B.V. (year). All rights reserved.
If you have any questions related to the data sheet, please contact our nearest sales office via e-mail
or telephone (details via salesaddresses@nexperia.com). Thank you for your cooperation and
understanding,
Kind regards,
Team Nexperia
NCR405U
SOT457
50 mA LED driver in SOT457
Rev. 1 — 10 December 2013
Product data sheet
1. Product profile
1.1 General description
LED driver consisting of resistor-equipped PNP transistor with two diodes on one chip in
an SOT457 (SC-74) plastic package.
1.2 Features and benefits
Stabilized output current of 50 mA
High current accuracy at supply voltage variation
Low voltage overhead of 1.4 V
Qualified according to AEC-Q101
Reduces component count and board space
High power dissipation of 750 mW
Stabilized output current adjustable up to 65 mA when an external resistor is used
1.3 Applications
Constant current LED driver
Generic constant current source
Automotive applications
1.4 Quick reference data
Table 1.
Symbol
Iout
Quick reference data
Parameter
Conditions
Min
42
-
Typ
50
-
Max Unit
stabilized output current
supply voltage
VS = 10 V; Vout = 8.6 V
58
40
mA
V
VS
NCR405U
NXP Semiconductors
50 mA LED driver
2. Pinning information
Table 2.
Pinning
Pin Symbol
Description
ground
Simplified outline
Graphic symbol
1
2
3
4
5
6
GND
IOUT
IOUT
VS
6
5
4
6
5
4
output current
output current
supply voltage
output current
external resistor
1
2
3
IOUT
REXT
1
2
3
aaa-010101
3. Ordering information
Table 3.
Ordering information
Type number
Package
Name
Description
Version
NCR405U
SC-74
plastic surface-mounted package; 6 leads
SOT457
(TSOP6)
4. Marking
Table 4.
Marking codes
Type number
NCR405U
Marking code
DC
NCR405U
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
Product data sheet
Rev. 1 — 10 December 2013
2 of 15
NCR405U
NXP Semiconductors
50 mA LED driver
5. Limiting values
Table 5.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Conditions
Min
Max
Unit
Iout
stabilized output current if
external resistor is used
-
65
mA
VS
supply voltage
-
40
V
Vout
VR
output voltage
VS = 40 V
-
38
V
[1]
[2]
[3]
[4]
[5]
reverse voltage
total power dissipation
-
0.5
V
Ptot
Tamb 25 C
Tamb 25 C
Tamb 25 C
Tamb 25 C
-
475
650
750
1100
150
+150
+150
mW
mW
mW
mW
C
-
-
-
Tj
junction temperature
ambient temperature
storage temperature
-
Tamb
Tstg
55
65
C
C
[1] Between all terminals.
[2] Device mounted on an FR4 Printed-Circuit Board (PCB); single-sided copper; tin-plated and standard
footprint.
[3] Device mounted on an FR4 PCB; single-sided copper; tin-plated and mounting pad for output 1 cm2.
[4] Device mounted on an FR4 PCB; 4-layer copper; tin-plated and standard footprint.
[5] Device mounted on an FR4 PCB; 4-layer copper; tin-plated and mounting pad for output 1 cm2.
aaa-010053
1
P
tot
(W)
0.8
(1)
(2)
0.6
0.4
0.2
0
-75
-25
25
75
125
175
(°C)
T
amb
(1) FR4 PCB, 4-layer copper; standard footprint.
(2) FR4 PCB, single-sided copper; standard footprint.
Fig 1. Power derating curve
NCR405U
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
Product data sheet
Rev. 1 — 10 December 2013
3 of 15
NCR405U
NXP Semiconductors
50 mA LED driver
6. Thermal characteristics
Table 6.
Symbol
Rth(j-a)
Thermal characteristics
Parameter
Conditions
Min
Typ
Max
265
190
165
115
50
Unit
K/W
K/W
K/W
K/W
K/W
[1]
[2]
[3]
[4]
thermal resistance from junction in free air
to ambient
-
-
-
-
-
-
-
-
-
-
Rth(j-sp)
thermal resistance from junction in free air
to solder point
[1] Device mounted on an FR4 PCB; single-sided copper; tin-plated and standard footprint.
[2] Device mounted on an FR4 PCB; single-sided copper; tin-plated and mounting pad for output 1 cm2.
[3] Device mounted on an FR4 PCB; 4-layer copper; tin-plated and standard footprint.
[4] Device mounted on an FR4 PCB; 4-layer copper; tin-plated and mounting pad for output 1 cm2.
aaa-010054
3
10
Z
th(j-a)
(K/W)
duty cycle = 1
0.75
2
0.5
0.33
0.2
10
0.1
0.05
10
0.02
0.01
0
1
-5
-4
-3
-2
-1
2
3
10
10
10
10
10
1
10
10
10
t
p
(s)
FR4 PCB, single-sided copper, standard footprint
Fig 2. Transient thermal impedance from junction to ambient as a function of pulse duration; typical values
NCR405U
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
Product data sheet
Rev. 1 — 10 December 2013
4 of 15
NCR405U
NXP Semiconductors
50 mA LED driver
aaa-010055
3
10
Z
th(j-a)
(K/W)
duty cycle = 1
0.75
0.5
2
10
0.33
0.2
0.1
10
0.05
0.02
0.01
0
1
-5
-4
-3
-2
-1
2
3
10
10
10
10
10
1
10
10
10
t
p
(s)
FR4 PCB, 4-layer copper, standard footprint
Fig 3. Transient thermal impedance from junction to ambient as a function of pulse duration; typical values
NCR405U
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
Product data sheet
Rev. 1 — 10 December 2013
5 of 15
NCR405U
NXP Semiconductors
50 mA LED driver
7. Characteristics
Table 7.
Characteristics
Tamb = 25 C; pulse test: tP 300 s; = 0.02; unless otherwise specified.
Symbol
Parameter
Conditions
Min
42
340
12
-
Typ
50
Max
58
Unit
mA
A
Iout
stabilized output current
ground current
VS = 10 V; Vout = 8.6 V
VS = 10 V; Iout = 0 A
IRint = 50 mA
IGND
Rint
420
16
500
21
internal resistance
VRint
voltage drop at internal
resistance Rint
Iout = 50 mA
0.80
-
V
VSmin
lowest sufficient supply
voltage overhead VS Vout
Iout > 42 mA
-
-
1.4
-
-
V
Iout / (Iout Tamb
)
stabilized output current
change over ambient
temperature
VS = 10 V; Vout = 8.6 V
0.3
%/K
Iout / (Iout VS)
stabilized output current
change over supply voltage VS Vout = 1.4 V
VS = 10 V;
-
1
-
%/V
aaa-010288
aaa-010057
2
10
2.4
R
= 56 Ω
ext
I
GND
(mA)
I
R
= 82 Ω
= open
out
ext
T
amb
= 80 °C
(mA)
R
ext
1.6
T
amb
= 25 °C
0.8
0
T
amb
= -40 °C
10
0
10
20
30
40
0
10
20
30
40
V
(V)
V (V)
S
S
VS Vout = 1.4 V; Tamb = 25 C
Iout = 0 mA
Fig 4. Output current as a function of supply voltage;
typical values
Fig 5. Ground current as a function of supply
voltage; typical values
NCR405U
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
Product data sheet
Rev. 1 — 10 December 2013
6 of 15
NCR405U
NXP Semiconductors
50 mA LED driver
aaa-010289
aaa-010290
2
2
10
10
T
= -40 °C
amb
V
S
- V = 1.4 V - 2 V
out
I
I
out
(mA)
out
(mA)
T
= 25 °C
= 80 °C
amb
V
S
- V = 1 V
out
T
amb
10
10
0
10
20
30
40
0
10
20
30
40
V
(V)
V (V)
S
S
Rext = open; Tamb = 25 C
VS Vout = 1.4 V; Rext = open
Fig 6. Output current as a function of supply voltage;
typical values
Fig 7. Output current as a function of supply voltage;
typical values
aaa-010291
2
10
T
amb
= 25 °C
I
out
(mA)
T
amb
= -40 °C
T
amb
= 80 °C
10
0
10
20
30
40
R
(ꢀ)
ext
VS = 10 V; Vout = 8.6 V
Fig 8. Output current as a function of external resistor; typical values
NCR405U
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
Product data sheet
Rev. 1 — 10 December 2013
7 of 15
NCR405U
NXP Semiconductors
50 mA LED driver
8. Application information
Figure 9 shows a typical application circuit for an LED driver. The constant current
ensures a constant LED brightness. The output current can be adjusted between 50 mA
and 65 mA by connecting an external resistor Rext. Figure 8 gives a first indication for
choosing the external resistor Rext. The output current slightly decreases when the power
load at LED driver increases. This effect is due to the self heating of the device and the
negative thermal coefficient of the output current.
V
V
CC
S
R
R
ext
int
REXT
IOUT
I
out
LED
GND
aaa-010022
Fig 9. LED driver application diagram
The output can be switched ON and OFF by connecting a Resistor-Equipped Transistor
(RET), e.g. PDTC124XU; see Figure 10.
VS
V
CC
R
ext
REXT
IOUT
GND
GND
I
out
OUT
IN/
OUT
LED
006aaa025
Fig 10. Switching the current ON/OFF; application diagram
NCR405U
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
Product data sheet
Rev. 1 — 10 December 2013
8 of 15
NCR405U
NXP Semiconductors
50 mA LED driver
9. Test information
9.1 Quality information
This product has been qualified in accordance with the Automotive Electronics Council
(AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is
suitable for use in automotive applications.
NCR405U
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
Product data sheet
Rev. 1 — 10 December 2013
9 of 15
NCR405U
NXP Semiconductors
50 mA LED driver
10. Package outline
Plastic surface-mounted package (TSOP6); 6 leads
SOT457
D
B
E
A
X
y
H
v
M
A
E
6
5
4
Q
pin 1
index
A
A
1
c
1
2
3
L
p
e
b
p
w
M B
detail X
0
1
2 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
A
b
c
D
E
e
H
L
Q
v
w
y
p
1
p
E
0.1
0.013
0.40
0.25
1.1
0.9
0.26
0.10
3.1
2.7
1.7
1.3
3.0
2.5
0.6
0.2
0.33
0.23
mm
0.95
0.2
0.2
0.1
REFERENCES
JEDEC JEITA
EUROPEAN
PROJECTION
OUTLINE
VERSION
ISSUE DATE
IEC
05-11-07
06-03-16
SOT457
SC-74
Fig 11. Package outline SOT457 (SC-74)
NCR405U
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
Product data sheet
Rev. 1 — 10 December 2013
10 of 15
NCR405U
NXP Semiconductors
50 mA LED driver
11. Soldering
3.45
1.95
0.55
(6×)
solder lands
solder resist
0.45
(6×)
0.95
0.95
3.3 2.825
solder paste
occupied area
0.7
Dimensions in mm
(6×)
0.8
(6×)
2.4
sot457_fr
Fig 12. Reflow soldering footprint for SOT457 (SC-74)
5.3
1.5
(4×)
solder lands
solder resist
occupied area
1.475
0.45
(2×)
5.05
1.475
Dimensions in mm
preferred transport
direction during soldering
1.45
(6×)
2.85
sot457_fw
Fig 13. Wave soldering footprint for SOT457 (SC-74)
NCR405U
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
Product data sheet
Rev. 1 — 10 December 2013
11 of 15
NCR405U
NXP Semiconductors
50 mA LED driver
12. Revision history
Table 8.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
NCR405U v.1
20131210
Product data sheet
-
-
NCR405U
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
Product data sheet
Rev. 1 — 10 December 2013
12 of 15
NCR405U
NXP Semiconductors
50 mA LED driver
13. Legal information
13.1 Data sheet status
Document status[1][2]
Product status[3]
Development
Definition
Objective [short] data sheet
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
Preliminary [short] data sheet Qualification
Product [short] data sheet Production
[1]
[2]
[3]
Please consult the most recently issued document before initiating or completing a design.
The term ‘short data sheet’ is explained in section “Definitions”.
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
Suitability for use in automotive applications — This NXP
13.2 Definitions
Semiconductors product has been qualified for use in automotive
applications. Unless otherwise agreed in writing, the product is not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at the customer's own
risk.
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
13.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
NCR405U
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
Product data sheet
Rev. 1 — 10 December 2013
13 of 15
NCR405U
NXP Semiconductors
50 mA LED driver
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
13.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
14. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
NCR405U
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
Product data sheet
Rev. 1 — 10 December 2013
14 of 15
NCR405U
NXP Semiconductors
50 mA LED driver
15. Contents
1
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1
1.2
1.3
1.4
General description . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits. . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Quick reference data . . . . . . . . . . . . . . . . . . . . 1
2
Pinning information. . . . . . . . . . . . . . . . . . . . . . 2
Ordering information. . . . . . . . . . . . . . . . . . . . . 2
Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3
Thermal characteristics . . . . . . . . . . . . . . . . . . 4
Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 6
Application information. . . . . . . . . . . . . . . . . . . 8
Test information. . . . . . . . . . . . . . . . . . . . . . . . . 9
Quality information . . . . . . . . . . . . . . . . . . . . . . 9
Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10
Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Revision history. . . . . . . . . . . . . . . . . . . . . . . . 12
3
4
5
6
7
8
9
9.1
10
11
12
13
Legal information. . . . . . . . . . . . . . . . . . . . . . . 13
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 13
Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 14
13.1
13.2
13.3
13.4
14
15
Contact information. . . . . . . . . . . . . . . . . . . . . 14
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2013.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 10 December 2013
Document identifier: NCR405U
相关型号:
NCS014-002-BS
D Type Connector, 14 Contact(s), Female, 0.05 inch Pitch, Solder Terminal, Latch, Plug
YAMAICHI
NCS020-002-BS
D Type Connector, 20 Contact(s), Female, 0.05 inch Pitch, Solder Terminal, Latch, Plug
YAMAICHI
NCS020-032-DS
D Type Connector, 20 Contact(s), Female, 0.05 inch Pitch, Solder Terminal, Latch, Plug
YAMAICHI
©2020 ICPDF网 联系我们和版权申明