LSF0101GW-Q100 [NEXPERIA]

1-bit bidirectional multi-voltage level translator; open-drain; push-pullProduction;


型号：	LSF0101GW-Q100
厂家：	Nexperia
描述：	1-bit bidirectional multi-voltage level translator; open-drain; push-pullProduction
文件：	总11页 (文件大小：193K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

LSF0101-Q100

1-bit bidirectional multi-voltage level translator; open-drain;

push-pull

Rev. 1 — 3 October 2022

Product data sheet

1. General description

The LSF0101-Q100 is an 1 channel bidirectional multi-voltage level translator for open-drain and

push-pull applications. It supports up to 100 MHz up translation and ≥ 100 MHz down translation

at ≤ 30 pF capacitive load. There is no need for a direction pin which minimizes system effort.

The LSF0101-Q100 supports 5 V tolerant I/O pins for compatibility with TTL levels in a variety of

applications. The ability to set up different voltage translation levels on each channel makes the

device very flexible and suitable for a lot of different applications.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100

(Grade 1) and is suitable for use in automotive applications.

2. Features and benefits

•

Automotive product qualification in accordance with AEC-Q100 (Grade 1)

Specified from -40 °C to +85 °C and from -40 °C to +125 °C

•

Bidirectional voltage translation with no direction pin

Up translation

•

≤ 100 MHz; C_L= 30 pF

≤ 40 MHz; C_L= 50 pF

•

Down translation

•

≥ 100 MHz; C_L= 30 pF

≤ 40 MHz; C_L= 50 pF

•

Hot insertion

Bidirectional voltage level translation between:

•

0.95 V and 1.8 V, 2.5 V, 3.3 V and 5.0 V

1.2 V and 1.8 V, 2.5 V, 3.3 V and 5.0 V

1.8 V and 2.5 V, 3.3 V and 5.0 V

2.5 V and 3.3 V and 5.0 V

3.3 V and 5.0 V

•

Low standby current

5 V tolerant I/O pins to support TTL

Low R_ONprovides less signal distortion

High-impedance I/O pins for EN = Low.

Flow-through pinout for easy PCB trace routing.

Latch-up performance exceeds 100 mA per JESD78 class II level A

ESD protection:

•

HBM ANSI/ESDA/JEDEC JS-001 exceeds 2000 V

CDM ANSI/ESDA/JEDEC JS-002 exceeds 1000 V

3. Applications

•

GPIO, MDIO, PMBus, SMBus, SDIO, UART, I²C, and other interfaces in Telecom infrastructure

Industrial

Personal computing

Nexperia

LSF0101-Q100

1-bit bidirectional multi-voltage level translator; open-drain; push-pull

4. Ordering information

Table 1. Ordering information

Type number

Package

Temperature range Name

Description

Version

LSF0101GW-Q100 -40 °C to +125 °C

TSSOP6 plastic thin shrink small outline package; 6 leads;

body width 1.25 mm

SOT363-2

5. Marking

Table 2. Marking

Type number

Marking code[1]

LSF0101GW-Q100

[1] The pin 1 indicator is located on the lower left corner of the device, below the marking code.

6. Functional diagram

refA

refB

aaa-030903

Fig. 1. Logic symbol

7. Pinning information

7.1. Pinning

GW package

SOT363-2 (TSSOP6)

GND

refA

refB

aaa-035242

LSF0101_Q100

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 1 — 3 October 2022

2 / 11

Nexperia

LSF0101-Q100

1-bit bidirectional multi-voltage level translator; open-drain; push-pull

7.2. Pin description

Table 3. Pin description

Symbol

Description

GND

refA

ground (0 V)

reference voltage A

data input/output A

data input/output B

reference voltage B

enable input (active HIGH)

refB

8. Functional description

Table 4. Function table

H = HIGH voltage level; L = LOW voltage level; Z = high-impedance OFF-state.

Input

input/output

A1, B1 channel

A1 = B1

9. Limiting values

Table 5. Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).

Symbol Parameter

Conditions

Min

-0.5

Max Unit

+7.0

+128 mA

+150 °C

V_I

input voltage

pins refA, refB, A1, B1 and EN

pins refA, refB, A1 and B1; continuous channel current

[1]

I_I/O

I_IK

input/ouput current

input clamping current V_I< 0 V

storage temperature

-50

-65

T_stg

P_tot

total power dissipation T_amb= -40 °C to +125 °C

[2]

250

[1] The minimum input voltage rating may be exceeded if the input current rating is observed.

[2] For SOT363-2 (TSSOP6) package: P_totderates linearly with 3.7 mW/K above 83 °C.

10. Recommended operating conditions

Table 6. Recommended operating conditions

Symbol Parameter

Conditions

Min

0.0

Max Unit

V_I

input voltage

pins refA, refB, A1, B1 and EN

pins refA, refB, A1 and B1; continuous channel current

5.0

I_I/O

input/ouput current

ambient temperature

+64

T_amb

-40

+125 °C

LSF0101_Q100

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 1 — 3 October 2022

3 / 11

Nexperia

LSF0101-Q100

1-bit bidirectional multi-voltage level translator; open-drain; push-pull

11. Static characteristics

Table 7. Static characteristics

At recommended operating conditions. Voltages are referenced to GND (ground = 0 V).

Symbol Parameter Conditions

T_amb= -40 °C to +125 °C Unit

Min

Typ[1]

Max

V_IK

I_I

input clamping voltage V_EN= 0 V; I_I= -18 mA

-1.2

leakage current

pins A1, B1, refA, refB and EN; V_I= GND to 5.0 V

pins refA, refB and EN; V_I= 0 V or 3 V

μA

C_I

input capacitance

C_io(off)

OFF-state input/output pins A1, B1; V_O= 0 V or 3 V; V_EN= 0.0 V

capacitance

3.7

6.0

C_io(on)

R_ON

ON-state input/output pins A1, B1; V_O= 0 V or 3 V; V_EN= 3.0 V

capacitance

6.0

12.5 pF

ON resistance

see Fig. 2

[2]

V_I= 0 V; V_pu= 5.0 V; I_O= 64 mA

V_refA= 3.3 V

V_refA= 1.8 V

V_refA= 1.0 V

V_I= 0 V; V_pu= 5.0 V; I_O= 32mA

V_refA= 1.8 V

V_refA= 2.5 V

V_I= 1.8 V; V_pu= 5.0 V; I_O= 15 mA

V_refA= 3.3 V

V_I= 1.0 V; V_pu= 3.3 V; I_O= 10 mA

V_refA= 1.8 V

V_I= 0 V; V_pu= 3.3 V; I_O= 10 mA

V_refA= 1.0 V

V_I= 0 V; V_pu= 1.8 V; I_O= 10 mA

V_refA= 1.0 V

[1] All typical values are measured at T_amb= 25 °C.

[2] Measured by the voltage drop between the An and Bn pins at the indicated current through the switch. ON resistance is determined by

the lowest voltage of the two (An or Bn) pins.

LSF0101_Q100

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 1 — 3 October 2022

4 / 11

Nexperia

LSF0101-Q100

1-bit bidirectional multi-voltage level translator; open-drain; push-pull

refA

refB

refA

LSF0101

aaa-030907

The A1 and B1 pins may be exchanged.

R_pu= 200 kΩ

C_EN= 100 nF

Fig. 2. Test circuit for measuring R_ON

12. Dynamic characteristics

Table 8. Switching characteristics

GND = 0 V; for waveform see Fig. 3; for test circuit see Fig. 4

Symbol Parameter

Conditions

T_amb= -40 °C to +125 °C

Unit

Min

Typ[1]

Max

Translating down

t_PLH

LOW to HIGH

A1 to B1 or B1 to A1;

propagation delay

V_IH= V_pu= V_refA+ 1 V

V_refA= 1.5 V; C_L= 15 pF

V_refA= 1.5 V; C_L= 30 pF

V_refA= 1.5 V; C_L= 50 pF

V_refA= 2.3 V; C_L= 15 pF

V_refA= 2.3 V; C_L= 30 pF

V_refA= 2.3 V; C_L= 50 pF

A1 to B1 or B1 to A1;

0.35

0.8

1.2

0.3

0.7

1.1

t_PHL

HIGH to LOW

propagation delay

V_IH= V_pu= V_refA+ 1 V

V_refA= 1.5 V; C_L= 15 pF

V_refA= 1.5 V; C_L= 30 pF

V_refA= 1.5 V; C_L= 50 pF

V_refA= 2.3 V; C_L= 15 pF

V_refA= 2.3 V; C_L= 30 pF

V_refA= 2.3 V; C_L= 50 pF

0.5

1.0

1.3

0.4

0.8

1.2

LSF0101_Q100

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 1 — 3 October 2022

5 / 11

Nexperia

LSF0101-Q100

1-bit bidirectional multi-voltage level translator; open-drain; push-pull

Symbol Parameter

Translating up

Conditions

T_amb= -40 °C to +125 °C

Unit

Min

Typ[1]

Max

t_PLH

LOW to HIGH

A1 to B1 or B1 to A1;

propagation delay

V_IH= V_refA; V_EXT= V_pu= V_refA+ 1 V

V_refA= 1.5 V; C_L= 15 pF

V_refA= 1.5 V; C_L= 30 pF

V_refA= 1.5 V; C_L= 50 pF

V_refA= 2.3 V; C_L= 15 pF

V_refA= 2.3 V; C_L= 30 pF

V_refA= 2.3 V; C_L= 50 pF

A1 to B1 or B1 to A1;

0.5

0.9

1.1

0.4

0.8

1.0

t_PHL

HIGH to LOW

propagation delay

V_IH= V_refA; V_EXT= V_pu= V_refA+ 1 V

V_refA= 1.5 V; C_L= 15 pF

V_refA= 1.5 V; C_L= 30 pF

V_refA= 1.5 V; C_L= 50 pF

V_refA= 2.3 V; C_L= 15 pF

V_refA= 2.3 V; C_L= 30 pF

V_refA= 2.3 V; C_L= 50 pF

0.6

1.1

1.3

0.4

0.9

1.0

[1] All typical values are measured at T_amb= 25 °C.

12.1. Waveforms and test circuit

input A1, B1

PHL

PLH

output B1, A1

aaa-030908

Measurement points are given in Table 9.

Logic levels: V_OLand V_OHare typical output voltage levels that occur with the output load.

Fig. 3. The data input (A1, B1) to output (B1, A1) propagation delay times

LSF0101_Q100

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 1 — 3 October 2022

6 / 11

Nexperia

LSF0101-Q100

1-bit bidirectional multi-voltage level translator; open-drain; push-pull

negative

pulse

0 V

90 %

10 %

90 %

10 %

90 %

positive

pulse

10 %

0 V

aaa-030285

a. V_Isource waveform

up/down translating

Translating up

switch

Translating down

refA

refB

EXT

refA

LSF0101

1 MΩ

aaa-030909

b. Test circuit

Test data is given in Table 9.

The A1 and B1 pins may be exchanged.

All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz; Z_O= 50 Ω.

Definitions test circuit:

C_L= Load capacitance including jig and probe capacitance;

C_EN= Decoupling capacitance;

R_pu= Pull-up resistance;

R_L= Load resistance;

S1/S2 = Test selection switch.

Fig. 4. Test circuit for measuring switching times

Table 9. Test data

Input

t_r, t_f

Output

V_M

Load

C_L

V_M

C_EN[1]

R_L[1]

R_pu

≤ 2 ns

0.5 × V_refA

15 pF, 30 pF, 50 pF 100 nF

300 Ω

200 kΩ

[1] All typical values are measured at T_amb= 25 °C.

LSF0101_Q100

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 1 — 3 October 2022

7 / 11

Nexperia

LSF0101-Q100

1-bit bidirectional multi-voltage level translator; open-drain; push-pull

13. Package outline

TSSOP6: plastic thin shrink small outline package; 6 leads; body width 1.25 mm

SOT363-2

(6x)

pin 1 index

M B

(6x)

detail X

3 mm

scale

Dimensions (mm are the original dimensions)

Unit

(1)

max 1.1 0.1 1.0

0.8 0.8

0.30 0.25 2.2 1.35

0.15 0.08 1.8 1.15

2.4 0.46

1.8 0.26

8°

0°

0.15

0.65 1.3

0.3 0.1 0.1

min

Note

1. Plastic or metal protrusions of 0.2 mm maximum per side are not included.

sot363-2_po

References

Outline

version

European

projection

Issue date

IEC

JEDEC

JEITA

21-12-15

21-12-16

SOT363-2

SC-88A

MO-203

Fig. 5. Package outline SOT363-2 (TSSOP6)

LSF0101_Q100

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 1 — 3 October 2022

8 / 11

Nexperia

LSF0101-Q100

1-bit bidirectional multi-voltage level translator; open-drain; push-pull

14. Abbreviations

Table 10. Abbreviations

Acronym

CMOS

ESD

Description

Complementary Metal Oxide Semiconductor

ElectroStatic Discharge

Human Body Model

HBM

Machine Model

PRR

Pulse Rate Repetition

TTL

Transistor-Transistor Logic

15. Revision history

Table 11. Revision history

Document ID

Release date Data sheet status

20221003 Product data sheet

Change notice Supersedes

LSF0101_Q100 v.1

LSF0101_Q100

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 1 — 3 October 2022

9 / 11

Nexperia

LSF0101-Q100

1-bit bidirectional multi-voltage level translator; open-drain; push-pull

equipment, nor in applications where failure or malfunction of an Nexperia

product can reasonably be expected to result in personal injury, death or

severe property or environmental damage. Nexperia and its suppliers accept

no liability for inclusion and/or use of Nexperia products in such equipment or

applications and therefore such inclusion and/or use is at the customer's own

risk.

16. Legal information

Data sheet status

Quick reference data — The Quick reference data is an extract of the

product data given in the Limiting values and Characteristics sections of this

document, and as such is not complete, exhaustive or legally binding.

Document status Product

Definition

[1][2]

status [3]

Applications — Applications that are described herein for any of these

Objective [short]

data sheet

Development

This document contains data from

the objective specification for

product development.

products are for illustrative purposes only. Nexperia makes no representation

or warranty that such applications will be suitable for the specified use

without further testing or modification.

Preliminary [short]

data sheet

Qualification

Production

This document contains data from

the preliminary specification.

Customers are responsible for the design and operation of their applications

and products using Nexperia products, and Nexperia accepts no liability for

any assistance with applications or customer product design. It is customer’s

sole responsibility to determine whether the Nexperia product is suitable

and fit for the customer’s applications and products planned, as well as

for the planned application and use of customer’s third party customer(s).

Customers should provide appropriate design and operating safeguards to

minimize the risks associated with their applications and products.

Product [short]

data sheet

This document contains the product

specification.

[1] Please consult the most recently issued document before initiating or

completing a design.

[2] The term 'short data sheet' is explained in section "Definitions".

[3] The product status of device(s) described in this document may have

changed since this document was published and may differ in case of

multiple devices. The latest product status information is available on

the internet at https://www.nexperia.com.

Nexperia does not accept any liability related to any default, damage, costs

or problem which is based on any weakness or default in the customer’s

applications or products, or the application or use by customer’s third party

customer(s). Customer is responsible for doing all necessary testing for the

customer’s applications and products using Nexperia products in order to

avoid a default of the applications and the products or of the application or

use by customer’s third party customer(s). Nexperia does not accept any

liability in this respect.

Definitions

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modifications or additions. Nexperia does not give any representations or

warranties as to the accuracy or completeness of information included herein

and shall have no liability for the consequences of use of such information.

Limiting values — Stress above one or more limiting values (as defined in

the Absolute Maximum Ratings System of IEC 60134) will cause permanent

damage to the device. Limiting values are stress ratings only and (proper)

operation of the device at these or any other conditions above those

given in the Recommended operating conditions section (if present) or the

Characteristics sections of this document is not warranted. Constant or

repeated exposure to limiting values will permanently and irreversibly affect

the quality and reliability of the device.

Short data sheet — A short data sheet is an extract from a full data sheet

with the same product type number(s) and title. A short data sheet is

intended for quick reference only and should not be relied upon to contain

detailed and full information. For detailed and full information see the relevant

full data sheet, which is available on request via the local Nexperia sales

office. In case of any inconsistency or conflict with the short data sheet, the

full data sheet shall prevail.

Terms and conditions of commercial sale — Nexperia products are

sold subject to the general terms and conditions of commercial sale, as

published at http://www.nexperia.com/profile/terms, unless otherwise agreed

in a valid written individual agreement. In case an individual agreement is

concluded only the terms and conditions of the respective agreement shall

apply. Nexperia hereby expressly objects to applying the customer’s general

terms and conditions with regard to the purchase of Nexperia products by

customer.

Product specification — The information and data provided in a Product

data sheet shall define the specification of the product as agreed between

Nexperia and its customer, unless Nexperia and customer have explicitly

agreed otherwise in writing. In no event however, shall an agreement be

valid in which the Nexperia product is deemed to offer functions and qualities

beyond those described in the Product data sheet.

No offer to sell or license — Nothing in this document may be interpreted

or construed as an offer to sell products that is open for acceptance or the

grant, conveyance or implication of any license under any copyrights, patents

or other industrial or intellectual property rights.

Disclaimers

Export control — This document as well as the item(s) described herein

may be subject to export control regulations. Export might require a prior

authorization from competent authorities.

Limited warranty and liability — Information in this document is believed

to be accurate and reliable. However, Nexperia does not give any

representations or warranties, expressed or implied, as to the accuracy

or completeness of such information and shall have no liability for the

consequences of use of such information. Nexperia takes no responsibility

for the content in this document if provided by an information source outside

of Nexperia.

Translations — A non-English (translated) version of a document is for

reference only. The English version shall prevail in case of any discrepancy

between the translated and English versions.

In no event shall Nexperia be liable for any indirect, incidental, punitive,

special or consequential damages (including - without limitation - lost

profits, lost savings, business interruption, costs related to the removal

or replacement of any products or rework charges) whether or not such

damages are based on tort (including negligence), warranty, breach of

contract or any other legal theory.

Trademarks

Notice: All referenced brands, product names, service names and

trademarks are the property of their respective owners.

Notwithstanding any damages that customer might incur for any reason

whatsoever, Nexperia’s aggregate and cumulative liability towards customer

for the products described herein shall be limited in accordance with the

Terms and conditions of commercial sale of Nexperia.

Right to make changes — Nexperia reserves the right to make changes

to information published in this document, including without limitation

specifications and product descriptions, at any time and without notice. This

document supersedes and replaces all information supplied prior to the

publication hereof.

Suitability for use in automotive applications — This Nexperia product

has been qualified for use in automotive applications. Unless otherwise

agreed in writing, the product is not designed, authorized or warranted to

be suitable for use in life support, life-critical or safety-critical systems or

LSF0101_Q100

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 1 — 3 October 2022

10 / 11

Nexperia

LSF0101-Q100

1-bit bidirectional multi-voltage level translator; open-drain; push-pull

Contents

1. General description......................................................1

2. Features and benefits.................................................. 1

3. Applications.................................................................. 1

4. Ordering information....................................................2

5. Marking..........................................................................2

6. Functional diagram.......................................................2

7. Pinning information......................................................2

7.1. Pinning.........................................................................2

7.2. Pin description.............................................................3

8. Functional description................................................. 3

9. Limiting values............................................................. 3

10. Recommended operating conditions........................3

11. Static characteristics..................................................4

12. Dynamic characteristics............................................ 5

12.1. Waveforms and test circuit........................................ 6

13. Package outline.......................................................... 8

14. Abbreviations..............................................................9

15. Revision history..........................................................9

16. Legal information......................................................10

For more information, please visit: http://www.nexperia.com

For sales office addresses, please send an email to: salesaddresses@nexperia.com

Date of release: 3 October 2022

LSF0101_Q100

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 1 — 3 October 2022

11 / 11

LSF0101GW-Q100 [NEXPERIA]

相关型号：

LSF0101GX

LSF0102

LSF0102-Q1

LSF0102DC

LSF0102DC-Q100

LSF0102DCTR

LSF0102DCUR

LSF0102DDFR

LSF0102DP

LSF0102DP-Q100

LSF0102DQER

LSF0102GS