74LVC2G53DP [NEXPERIA]
2-channel analog multiplexer/demultiplexerProduction;型号: | 74LVC2G53DP |
厂家: | Nexperia |
描述: | 2-channel analog multiplexer/demultiplexerProduction 光电二极管 |
文件: | 总23页 (文件大小:324K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
74LVC2G53
2-channel analog multiplexer/demultiplexer
Rev. 14 — 22 April 2021
Product data sheet
1. General description
The 74LVC2G53 is a single-pole double-throw analog switch with a digital select input (S), two
independent inputs/outputs (Y0 and Y1), a common input/output (Z) and a digital enable input (E).
When E is HIGH, the switch is turned off. Inputs can be driven from either 3.3 V or 5 V devices.
This feature allows the use of these devices as translators in mixed 3.3 V and 5 V environments.
Schmitt trigger action at the select and enable inputs makes the circuit tolerant of slower input rise
and fall times across the entire VCC range from 1.65 V to 5.5 V.
2. Features and benefits
•
•
Wide supply voltage range from 1.65 V to 5.5 V
Very low ON resistance:
•
•
•
7.5 Ω (typical) at VCC = 2.7 V
6.5 Ω (typical) at VCC = 3.3 V
6 Ω (typical) at VCC = 5 V
•
•
•
•
•
•
•
Switch current capability of 32 mA
High noise immunity
CMOS low-power consumption
Overvoltage tolerant inputs to 5.5 V
TTL interface compatibility at 3.3 V
Latch-up performance meets requirements of JESD 78 Class I
ESD protection:
•
•
•
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115-A exceeds 200 V
CDM JESD22-C101E exceeds 1000 V
•
•
Multiple package options
Specified from -40 °C to +85 °C and from -40 °C to +125 °C
3. Ordering information
Table 1. Ordering information
Type number
Package
Temperature range Name
Description
Version
74LVC2G53DP -40 °C to +125 °C
74LVC2G53DC -40 °C to +125 °C
74LVC2G53GT -40 °C to +125 °C
74LVC2G53GN -40 °C to +125 °C
74LVC2G53GS -40 °C to +125 °C
TSSOP8 plastic thin shrink small outline package; 8 leads;
body width 3 mm; lead length 0.5 mm
SOT505-2
VSSOP8 plastic very thin shrink small outline package; 8 leads;
body width 2.3 mm
SOT765-1
SOT833-1
SOT1116
SOT1203
XSON8
XSON8
XSON8
plastic extremely thin small outline package; no leads;
8 terminals; body 1 × 1.95 × 0.5 mm
extremely thin small outline package; no leads;
8 terminals; body 1.2 × 1.0 × 0.35 mm
extremely thin small outline package; no leads;
8 terminals; body 1.35 × 1.0 × 0.35 mm
Nexperia
74LVC2G53
2-channel analog multiplexer/demultiplexer
4. Marking
Table 2. Marking codes
Type number
Marking code[1]
74LVC2G53DP
74LVC2G53DC
74LVC2G53GT
74LVC2G53GN
74LVC2G53GS
V53
V53
V53
V3
V3
[1] The pin 1 indicator is located on the lower left corner of the device, below the marking code.
5. Functional diagram
Y0
S
Z
Y1
Y0
S
Z
Y1
E
E
001aad387
001aah795
Fig. 1. Logic symbol
Fig. 2. Logic diagram
6. Pinning information
6.1. Pinning
74LVC2G53
Z
E
1
2
3
4
8
7
6
5
V
CC
Y0
Y1
S
74LVC2G53
GND
GND
1
2
3
4
8
7
6
5
Z
E
V
CC
Y0
Y1
S
GND
GND
001aae800
Transparent top view
001aae798
Fig. 3. Pin configuration SOT505-2 (TSSOP8) and
SOT765-1 (VSSOP8)
Fig. 4. Pin configuration SOT833-1, SOT1116 and
SOT1203 (XSON8)
©
74LVC2G53
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
Rev. 14 — 22 April 2021
2 / 23
Nexperia
74LVC2G53
2-channel analog multiplexer/demultiplexer
6.2. Pin description
Table 3. Pin description
Symbol
Pin
1
Description
Z
common output or input
enable input (active LOW)
ground (0 V)
E
2
GND
GND
S
3
4
ground (0 V)
5
select input
Y1
Y0
VCC
6
independent input or output
independent input or output
supply voltage
7
8
7. Functional description
Table 4. Function table
H = HIGH voltage level; L = LOW voltage level; X = don’t care; Z = high-impedance OFF-state.
Input
Channel on
S
L
E
L
Y0 to Z or Z to Y0
Y1 to Z or Z to Y1
Z
H
X
L
H
8. Limiting values
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol
VCC
VI
Parameter
Conditions
Min
-0.5
-0.5
-50
-
Max
+6.5
+6.5
-
Unit
V
supply voltage
input voltage
[1]
[2]
V
IIK
input clamping current
switch clamping current
switch voltage
VI < -0.5 V or VI > VCC + 0.5 V
VI < -0.5 V or VI > VCC + 0.5 V
enable and disable mode
mA
mA
V
ISK
±50
VSW
ISW
-0.5
-
VCC + 0.5
±50
switch current
VSW > -0.5 V or VSW < VCC + 0.5 V
mA
mA
mA
°C
ICC
supply current
-
100
IGND
Tstg
Ptot
ground current
-100
-65
-
-
storage temperature
total power dissipation
+150
250
Tamb = -40 °C to +125 °C
[3]
mW
[1] The minimum input voltage rating may be exceeded if the input current rating is observed.
[2] The minimum and maximum switch voltage ratings may be exceeded if the switch clamping current rating is observed.
[3] For SOT505-2 (TSSOP8) package: Ptot derates linearly with 4.6 mW/K above 96 °C.
For SOT765-1 (VSSOP8) package: Ptot derates linearly with 4.9 mW/K above 99 °C.
For SOT833-1 (XSON8) package: Ptot derates linearly with 3.1 mW/K above 68 °C.
For SOT1116 (XSON8) package: Ptot derates linearly with 4.2 mW/K above 90 °C.
For SOT1203 (XSON8) package: Ptot derates linearly with 3.6 mW/K above 81 °C.
©
74LVC2G53
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
Rev. 14 — 22 April 2021
3 / 23
Nexperia
74LVC2G53
2-channel analog multiplexer/demultiplexer
9. Recommended operating conditions
Table 6. Operating conditions
Symbol
VCC
Parameter
Conditions
Min
Max
5.5
Unit
V
supply voltage
1.65
VI
input voltage
0
0
5.5
V
VSW
switch voltage
enable and disable mode
[1]
VCC
+125
20
V
Tamb
Δt/ΔV
ambient temperature
input transition rise and fall rate
-40
-
°C
VCC = 1.65 V to 2.7 V
VCC = 2.7 V to 5.5 V
[2]
[2]
ns/V
ns/V
-
10
[1] To avoid sinking GND current from terminal Z when switch current flows in terminal Yn, the voltage drop across the bidirectional switch
must not exceed 0.4 V. If the switch current flows into terminal Z, no GND current will flow from terminal Yn. In this case, there is no
limit for the voltage drop across the switch.
[2] Applies to control signal levels.
10. Static characteristics
Table 7. Static characteristics
At recommended operating conditions; voltages are referenced to GND (ground 0 V).
Symbol Parameter
Conditions
-40 °C to +85 °C
-40 °C to +125 °C Unit
Min
Typ [1]
Max
Min
Max
VIH
VIL
II
HIGH-level input VCC = 1.65 V to 1.95 V
0.65VCC
-
-
0.65VCC
-
V
V
V
V
V
V
V
V
μA
voltage
VCC = 2.3 V to 2.7 V
1.7
-
-
1.7
-
VCC = 3 V to 3.6 V
VCC = 4.5 V to 5.5 V
2.0
-
-
-
2.0
-
-
0.7VCC
-
0.7VCC
LOW-level input VCC = 1.65 V to 1.95 V
-
-
-
-
-
-
0.35VCC
0.7
-
-
-
0.35VCC
0.7
voltage
VCC = 2.3 V to 2.7 V
-
VCC = 3 V to 3.6 V
-
-
0.8
0.8
VCC = 4.5 V to 5.5 V
0.3VCC
±1
0.3VCC
±1
input leakage
current
pin S and pin E;
VI = 5.5 V or GND;
VCC = 0 V to 5.5 V
[2]
±0.1
-
IS(OFF)
IS(ON)
ICC
OFF-state
leakage current
VCC = 5.5 V; see Fig. 5
[2]
[2]
[2]
-
-
-
±0.1
±0.1
0.1
±0.2
±1
4
-
-
-
±0.5
±2
4
μA
μA
μA
ON-state leakage VCC = 5.5 V; see Fig. 6
current
supply current
VI = 5.5 V or GND;
VSW = GND or VCC
;
VCC = 1.65 V to 5.5 V
ΔICC
additional supply pin S and pin E;
[2]
-
5
500
-
500
μA
current
VI = VCC - 0.6 V;
VSW = GND or VCC
VCC = 5.5 V
;
©
74LVC2G53
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
Rev. 14 — 22 April 2021
4 / 23
Nexperia
74LVC2G53
2-channel analog multiplexer/demultiplexer
Symbol Parameter
Conditions
-40 °C to +85 °C
-40 °C to +125 °C Unit
Min
Typ [1]
2.5
Max
Min
Max
CI
input capacitance
-
-
-
-
-
-
-
-
pF
pF
CS(OFF) OFF-state
capacitance
6.0
CS(ON)
ON-state
-
18
-
-
-
pF
capacitance
[1] Typical values are measured at Tamb = 25 °C.
[2] These typical values are measured at VCC = 3.3 V.
10.1. Test circuits
V
CC
switch
S
E
1
2
V
V
IL
IH
IH
V
V
IH
S
Z
Y0
Y1
1
2
V
or V
V
IL
IH
IH
switch
I
S
E
GND
V
I
V
O
001aad390
VI = VCC or GND; VO = GND or VCC
.
Fig. 5. Test circuit for measuring OFF-state leakage current
V
CC
switch
S
E
1
2
V
V
V
IL
IL
IL
V
IH
S
Z
Y0
Y1
1
2
V
or V
IH
IL
switch
I
S
E
GND
V
IL
V
I
V
O
001aad391
VI = VCC or GND and VO = open circuit.
Fig. 6. Test circuit for measuring ON-state leakage current
©
74LVC2G53
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
Rev. 14 — 22 April 2021
5 / 23
Nexperia
74LVC2G53
2-channel analog multiplexer/demultiplexer
10.2. ON resistance
Table 8. ON resistance
At recommended operating conditions; voltages are referenced to GND (ground 0 V); for graphs see Fig. 8 to Fig. 13.
Symbol Parameter
Conditions
-40 °C to +85 °C
-40 °C to +125 °C Unit
Min Typ[1] Max
Min
Max
RON(peak) ON resistance
(peak)
VI = GND to VCC; see Fig. 7
ISW = 4 mA; VCC = 1.65 V to 1.95 V
ISW = 8 mA; VCC = 2.3 V to 2.7 V
ISW = 12 mA; VCC = 2.7 V
-
-
-
-
-
34.0
12.0
10.4
7.8
130
30
25
20
15
-
-
-
-
-
195
45
38
30
23
Ω
Ω
Ω
Ω
Ω
ISW = 24 mA; VCC = 3 V to 3.6 V
ISW = 32 mA; VCC = 4.5 V to 5.5 V
VI = GND; see Fig. 7
6.2
RON(rail) ON resistance
(rail)
ISW = 4 mA; VCC = 1.65 V to 1.95 V
ISW = 8 mA; VCC = 2.3 V to 2.7 V
ISW = 12 mA; VCC = 2.7 V
-
-
-
-
-
8.2
7.1
6.9
6.5
5.8
18
16
14
12
10
-
-
-
-
-
27
24
21
18
15
Ω
Ω
Ω
Ω
Ω
ISW = 24 mA; VCC = 3 V to 3.6 V
ISW = 32 mA; VCC = 4.5 V to 5.5 V
VI = VCC; see Fig. 7
ISW = 4 mA; VCC = 1.65 V to 1.95 V
ISW = 8 mA; VCC = 2.3 V to 2.7 V
ISW = 12 mA; VCC = 2.7 V
-
-
-
-
-
10.4
7.6
7.0
6.1
4.9
30
20
18
15
10
-
-
-
-
-
45
30
27
23
15
Ω
Ω
Ω
Ω
Ω
ISW = 24 mA; VCC = 3 V to 3.6 V
ISW = 32 mA; VCC = 4.5 V to 5.5 V
VI = GND to VCC
RON(flat) ON resistance
(flatness)
[2]
ISW = 4 mA;VCC = 1.65 V to 1.95 V
ISW = 8 mA; VCC = 2.3 V to 2.7 V
ISW = 12 mA; VCC = 2.7 V
-
-
-
-
-
26.0
5.0
3.5
2.0
1.5
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Ω
Ω
Ω
Ω
Ω
ISW = 24 mA; VCC = 3 V to 3.6 V
ISW = 32 mA; VCC = 4.5 V to 5.5 V
[1] Typical values are measured at Tamb = 25 °C and nominal VCC
.
[2] Flatness is defined as the difference between the maximum and minimum value of ON resistance measured at identical VCC and
temperature.
©
74LVC2G53
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
Rev. 14 — 22 April 2021
6 / 23
Nexperia
74LVC2G53
2-channel analog multiplexer/demultiplexer
10.3. ON resistance test circuit and graphs
V
SW
switch
S
E
V
CC
1
2
V
V
IL
IL
IL
V
IH
V
S
Z
Y0
Y1
1
2
V
or V
IH
IL
switch
E
GND
V
IL
I
V
I
SW
001aad392
RON = VSW / ISW
.
Fig. 7. Test circuit for measuring ON resistance
mna673
40
R
ON
(Ω)
30
(1)
20
10
0
(2)
(3)
(4)
(5)
4
0
1
2
3
5
V (V)
I
Tamb = 25 °C
1. VCC = 1.8 V
2. VCC = 2.5 V
3. VCC = 2.7 V
4. VCC = 3.3 V
5. VCC = 5.0 V
Fig. 8. Typical ON resistance as a function of input voltage
©
74LVC2G53
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
Rev. 14 — 22 April 2021
7 / 23
Nexperia
74LVC2G53
2-channel analog multiplexer/demultiplexer
001aaa712
001aaa708
55
15
R
ON
(Ω)
R
ON
(Ω)
45
13
35
25
15
5
11
9
(4)
(3)
(2)
(1)
(1)
(2)
(3)
(4)
7
5
0
0.4
0.8
1.2
1.6
2.0
0
0.5
1.0
1.5
2.0
2.5
V (V)
I
V (V)
I
VCC = 1.8 V
VCC = 2.5 V
1. Tamb = 125 °C
2. Tamb = 85 °C
3. Tamb = 25 °C
4. Tamb = -40 °C
1. Tamb = 125 °C
2. Tamb = 85 °C
3. Tamb = 25 °C
4. Tamb = -40 °C
Fig. 9. ON resistance as a function of input voltage
Fig. 10. ON resistance as a function of input voltage
001aaa709
001aaa710
13
10
R
ON
(Ω)
R
ON
(Ω)
11
8
6
4
(1)
(1)
(2)
9
7
5
(2)
(3)
(3)
(4)
(4)
0
0.5
1.0
1.5
2.0
2.5
V (V)
3.0
0
1
2
3
4
V (V)
I
I
VCC = 2.7 V
VCC = 3.3 V
1. Tamb = 125 °C
2. Tamb = 85 °C
3. Tamb = 25 °C
4. Tamb = -40 °C
1. Tamb = 125 °C
2. Tamb = 85 °C
3. Tamb = 25 °C
4. Tamb = -40 °C
Fig. 11. ON resistance as a function of input voltage
Fig. 12. ON resistance as a function of input voltage
©
74LVC2G53
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
Rev. 14 — 22 April 2021
8 / 23
Nexperia
74LVC2G53
2-channel analog multiplexer/demultiplexer
001aaa711
7
6
5
4
3
R
ON
(Ω)
(1)
(2)
(3)
(4)
0
1
2
3
4
5
V (V)
I
VCC = 5.0 V
1. Tamb = 125 °C
2. Tamb = 85 °C
3. Tamb = 25 °C
4. Tamb = -40 °C
Fig. 13. ON resistance as a function of input voltage
©
74LVC2G53
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
Rev. 14 — 22 April 2021
9 / 23
Nexperia
74LVC2G53
2-channel analog multiplexer/demultiplexer
11. Dynamic characteristics
Table 9. Dynamic characteristics
At recommended operating conditions; voltages are referenced to GND (ground = 0 V); for test circuit see Fig. 16.
Symbol Parameter
Conditions
-40 °C to +85 °C
-40 °C to +125 °C Unit
Min Typ[1] Max
Min
Max
tpd
propagation delay Z to Yn or Yn to Z; see Fig. 14
[2]
[3]
VCC = 1.65 V to 1.95 V
VCC = 2.3 V to 2.7 V
VCC = 2.7 V
-
-
-
-
-
-
-
-
-
-
2
-
-
-
-
-
2.5
1.5
ns
ns
ns
ns
ns
1.2
1.0
0.8
0.6
1.25
1.0
VCC = 3.0 V to 3.6 V
VCC = 4.5 V to 5.5 V
0.8
ten
enable time
S to Z or Yn; see Fig. 15
VCC = 1.65 V to 1.95 V
VCC = 2.3 V to 2.7 V
VCC = 2.7 V
[2]
[2]
[2]
[2]
2.6
1.9
1.9
1.8
1.3
6.7
4.1
4.0
3.4
2.6
10.3
6.4
5.5
5.0
3.8
2.6
1.9
1.8
1.8
1.3
12.9
8.0
7.0
6.3
4.8
ns
ns
ns
ns
ns
VCC = 3.0 V to 3.6 V
VCC = 4.5 V to 5.5 V
E to Z or Yn; see Fig. 15
VCC = 1.65 V to 1.95 V
VCC = 2.3 V to 2.7 V
VCC = 2.7 V
1.9
1.4
1.1
1.2
1.0
4.0
2.5
2.6
2.2
1.7
7.3
4.4
3.9
3.8
2.6
1.9
1.4
1.1
1.2
1.0
9.2
5.5
4.9
4.8
3.3
ns
ns
ns
ns
ns
VCC = 3.0 V to 3.6 V
VCC = 4.5 V to 5.5 V
S to Z or Yn; see Fig. 15
VCC = 1.65 V to 1.95 V
VCC = 2.3 V to 2.7 V
VCC = 2.7 V
tdis
disable time
2.1
1.4
1.4
1.1
1.0
6.8
3.7
4.9
4.0
2.9
10.0
6.1
6.2
5.4
3.8
2.1
1.4
1.4
1.1
1.0
12.5
7.7
7.8
6.8
4.8
ns
ns
ns
ns
ns
VCC = 3.0 V to 3.6 V
VCC = 4.5 V to 5.5 V
E to Z or Yn; see Fig. 15
VCC = 1.65 V to 1.95 V
VCC = 2.3 V to 2.7 V
VCC = 2.7 V
2.3
1.2
1.4
2.0
1.3
5.6
3.2
4.0
3.7
2.9
8.6
4.8
5.2
5.0
3.8
2.3
1.2
1.4
2.0
1.3
11.0
6.0
6.5
6.3
4.8
ns
ns
ns
ns
ns
VCC = 3.0 V to 3.6 V
VCC = 4.5 V to 5.5 V
[1] Typical values are measured at Tamb = 25 °C and nominal VCC
.
[2] tpd is the same as tPLH and tPHL; ten is the same as tPZH and tPZL; tdis is the same as tPLZ and tPHZ
[3] Propagation delay is the calculated RC time constant of the typical ON resistance of the switch and the specified capacitance when
driven by an ideal voltage source (zero output impedance).
©
74LVC2G53
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
Rev. 14 — 22 April 2021
10 / 23
Nexperia
74LVC2G53
2-channel analog multiplexer/demultiplexer
11.1. Waveforms and test circuits
V
I
Yn or Z
input
V
V
M
M
GND
t
t
PHL
PLH
V
OH
Z or Yn
output
V
M
V
M
V
OL
001aac361
Measurement points are given in Table 10.
Logic levels: VOL and VOH are typical output voltage levels that occur with the output load.
Fig. 14. Input (Yn or Z) to output (Z or Yn) propagation delays
V
I
S, E input
V
M
t
GND
t
PLZ
PZL
V
CC
output
Z, Yn LOW to OFF
V
M
OFF to LOW
V
X
V
OL
t
t
PZH
PHZ
V
OH
V
Y
output
Z, Yn
HIGH to OFF
OFF to HIGH
V
M
GND
switch
enabled
switch
disabled
switch
enabled
001aad393
Measurement points are given in Table 10.
Logic levels: VOL and VOH are typical output voltage levels that occur with the output load.
Fig. 15. Enable and disable times
Table 10. Measurement points
Supply voltage
VCC
Input
Output
VM
VM
VX
VY
1.65 V to 2.7 V
2.7 V to 5.5 V
0.5VCC
0.5VCC
0.5VCC
0.5VCC
VOL + 0.15 V
VOL + 0.3 V
VOH - 0.15 V
VOH - 0.3 V
©
74LVC2G53
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
Rev. 14 — 22 April 2021
11 / 23
Nexperia
74LVC2G53
2-channel analog multiplexer/demultiplexer
t
W
V
I
90 %
negative
pulse
V
V
V
M
M
10 %
0 V
t
t
r
f
t
t
f
r
V
I
90 %
positive
pulse
V
M
M
10 %
0 V
t
W
V
EXT
V
CC
R
L
V
V
O
I
PULSE
GENERATOR
DUT
R
T
C
L
R
L
001aae235
Test data is given in Table 11.
Definitions for test circuit:
RL = Load resistance.
CL = Load capacitance including jig and probe capacitance.
RT = Termination resistance should be equal to output impedance Zo of the pulse generator.
VEXT = Test voltage for switching times.
Fig. 16. Test circuit for measuring switching times
Table 11. Test data
Supply voltage Input
VCC VI
1.65 V to 1.95 V VCC
Load
CL
VEXT
tr, tf
RL
tPLH, tPHL
open
tPZH, tPHZ
GND
tPZL, tPLZ
2VCC
≤ 2.0 ns
≤ 2.0 ns
≤ 2.5 ns
≤ 2.5 ns
≤ 2.5 ns
30 pF
30 pF
50 pF
50 pF
50 pF
1 kΩ
2.3 V to 2.7 V
2.7 V
VCC
VCC
VCC
VCC
500 Ω
500 Ω
500 Ω
500 Ω
open
GND
2VCC
open
GND
2VCC
3 V to 3.6 V
4.5 V to 5.5 V
open
GND
2VCC
open
GND
2VCC
©
74LVC2G53
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
Rev. 14 — 22 April 2021
12 / 23
Nexperia
74LVC2G53
2-channel analog multiplexer/demultiplexer
11.2. Additional dynamic characteristics
Table 12. Additional dynamic characteristics
At recommended operating conditions; voltages are referenced to GND (ground = 0 V); Tamb = 25 °C.
Symbol Parameter
Conditions
Min
Typ
Max Unit
THD
total harmonic distortion
fi = 600 Hz to 20 kHz; RL = 600 Ω;
CL = 50 pF; VI = 0.5 V (p-p); see Fig. 17
VCC = 1.65 V
-
-
-
-
0.260
0.078
0.078
0.078
-
-
-
-
%
%
%
%
VCC = 2.3 V
VCC = 3.0 V
VCC = 4.5 V
f(-3dB)
-3 dB frequency response RL = 50 Ω; CL = 5 pF; see Fig. 18
VCC = 1.65 V
VCC = 2.3 V
VCC = 3.0 V
VCC = 4.5 V
-
-
-
-
200
300
300
300
-
-
-
-
MHz
MHz
MHz
MHz
αiso
isolation (OFF-state)
RL = 50 Ω; CL = 5 pF; fi = 10 MHz;
see Fig. 19
VCC = 1.65 V
VCC = 2.3 V
VCC = 3.0 V
VCC = 4.5 V
-
-
-
-
-42
-42
-40
-40
-
-
-
-
dB
dB
dB
dB
Qinj
charge injection
CL = 0.1 nF; Vgen = 0 V; Rgen = 0 Ω;
fi = 1 MHz; RL = 1 MΩ; see Fig. 20
VCC = 1.8 V
VCC = 2.5 V
VCC = 3.3 V
VCC = 4.5 V
VCC = 5.5 V
-
-
-
-
-
3.3
4.1
5.0
6.4
7.5
-
-
-
-
-
pC
pC
pC
pC
pC
11.3. Test circuits
V
0.5V
CC
CC
switch
S
E
1
2
V
V
V
IL
IL
IL
R
L
V
IH
S
Z
Y0
Y1
1
2
10 µF
V
or V
IH
IL
switch
0.1 µF
E
V
IL
D
C
L
f
i
600 Ω
GND
001aad394
Fig. 17. Test circuit for measuring total harmonic distortion
©
74LVC2G53
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
Rev. 14 — 22 April 2021
13 / 23
Nexperia
74LVC2G53
2-channel analog multiplexer/demultiplexer
V
0.5V
CC
CC
switch
S
E
1
2
V
V
IL
IL
IL
R
L
V
V
IH
S
Z
Y0
Y1
1
2
V
or V
IH
IL
switch
0.1 µF
E
V
IL
dB
C
L
f
i
50 Ω
GND
001aad395
Adjust fi voltage to obtain 0 dBm level at output. Increase fi frequency until dB meter reads -3 dB.
Fig. 18. Test circuit for measuring the frequency response when switch is in ON-state
0.5V
0.5V
CC
CC
V
CC
switch
S
E
R
L
R
L
1
2
V
V
IH
IH
IH
V
V
IL
S
Z
Y0
Y1
1
2
V
or V
IH
IL
switch
0.1 µF
E
V
IH
dB
C
L
f
i
50 Ω
GND
001aad396
Adjust fi voltage to obtain 0 dBm level at input.
Fig. 19. Test circuit for measuring isolation (OFF-state)
©
Nexperia B.V. 2021. All rights reserved
74LVC2G53
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 14 — 22 April 2021
14 / 23
Nexperia
74LVC2G53
2-channel analog multiplexer/demultiplexer
V
CC
S
Z
Y0
Y1
1
switch
2
E
R
gen
V
IL
G
V
V
R
L
C
L
I
O
V
gen
GND
001aad398
a. Test circuit
logic
input
(S) off
on
off
V
O
ΔV
O
001aac478
b. Input and output pulse definitions
Qinj = ΔVO × CL.
ΔVO = output voltage variation.
Rgen = generator resistance.
Vgen = generator voltage.
Fig. 20. Test circuit for measuring charge injection
©
74LVC2G53
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
Rev. 14 — 22 April 2021
15 / 23
Nexperia
74LVC2G53
2-channel analog multiplexer/demultiplexer
12. Package outline
TSSOP8: plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mm
SOT505-2
D
E
A
X
c
H
v
M
y
A
E
Z
5
8
A
2
A
(A )
3
A
1
pin 1 index
θ
L
p
L
detail X
1
4
e
w
M
b
p
0
2.5
5 mm
scale
DIMENSIONS (mm are the original dimensions)
A
(1)
(1)
(1)
A
A
A
b
c
D
E
e
H
E
L
L
p
UNIT
v
w
y
Z
θ
1
2
3
p
max.
0.15
0.00
0.95
0.75
0.38
0.22
0.18
0.08
3.1
2.9
3.1
2.9
4.1
3.9
0.47
0.33
0.70
0.35
8°
0°
mm
1.1
0.65
0.5
0.2
0.13
0.1
0.25
Note
1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.
REFERENCES
OUTLINE
EUROPEAN
PROJECTION
ISSUE DATE
VERSION
IEC
JEDEC
JEITA
02-01-16
SOT505-2
- - -
Fig. 21. Package outline SOT505-2 (TSSOP8)
©
74LVC2G53
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
Rev. 14 — 22 April 2021
16 / 23
Nexperia
74LVC2G53
2-channel analog multiplexer/demultiplexer
VSSOP8: plastic very thin shrink small outline package; 8 leads; body width 2.3 mm
SOT765-1
D
E
A
X
c
y
H
E
v
A
Z
5
8
Q
A
2
A
A
(A )
3
1
pin 1 index
θ
L
p
detail X
1
4
L
e
w
b
p
0
5 mm
scale
Dimensions (mm are the original dimensions)
A
(1)
(2)
(1)
Unit
A
A
A
b
c
D
E
e
H
E
L
L
p
Q
v
w
y
Z
θ
1
2
3
p
max.
max
mm nom
min
0.15 0.85
0.00 0.60
0.27 0.23 2.1 2.4
0.17 0.08 1.9 2.2
3.2
3.0
0.40 0.21
0.15 0.19
0.4
8°
0°
1
0.12
0.5
0.4
0.2 0.08 0.1
0.1
Note
1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.
2. Plastic or metal protrusions of 0.25 mm maximum per side are not included.
sot765-1_po
References
Outline
version
European
projection
Issue date
IEC
JEDEC
JEITA
07-06-02
16-05-31
SOT765-1
MO-187
Fig. 22. Package outline SOT765-1 (VSSOP8)
©
74LVC2G53
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
Rev. 14 — 22 April 2021
17 / 23
Nexperia
74LVC2G53
2-channel analog multiplexer/demultiplexer
XSON8: plastic extremely thin small outline package; no leads; 8 terminals; body 1 x 1.95 x 0.5 mm
SOT833-1
b
1
2
3
4
4×
(2)
L
L
1
e
8
7
6
5
e
e
e
1
1
1
8×
(2)
A
A
1
D
E
terminal 1
index area
0
1
2 mm
scale
DIMENSIONS (mm are the original dimensions)
(1)
A
A
1
UNIT
b
D
E
e
e
1
L
L
1
max max
0.25
0.17
2.0
1.9
1.05
0.95
0.35 0.40
0.27 0.32
mm
0.5 0.04
0.6
0.5
Notes
1. Including plating thickness.
2. Can be visible in some manufacturing processes.
REFERENCES
JEDEC JEITA
OUTLINE
VERSION
EUROPEAN
PROJECTION
ISSUE DATE
IEC
07-11-14
07-12-07
SOT833-1
- - -
- - -
MO-252
Fig. 23. Package outline SOT833-1 (XSON8)
©
74LVC2G53
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
Rev. 14 — 22 April 2021
18 / 23
Nexperia
74LVC2G53
2-channel analog multiplexer/demultiplexer
XSON8: extremely thin small outline package; no leads;
8 terminals; body 1.2 x 1.0 x 0.35 mm
SOT1116
b
4
(2)
1
2
3
(4×)
L
L
1
e
8
7
6
5
e
e
e
1
1
1
(2)
(8×)
A
1
A
D
E
terminal 1
index area
0
0.5
scale
1 mm
Dimensions
Unit
(1)
A
A
b
D
E
e
e
1
L
L
1
1
max 0.35 0.04 0.20 1.25 1.05
0.35 0.40
0.15 1.20 1.00 0.55 0.3 0.30 0.35
0.12 1.15 0.95 0.27 0.32
mm nom
min
Note
1. Including plating thickness.
2. Visible depending upon used manufacturing technology.
sot1116_po
References
Outline
version
European
Issue date
projection
IEC
JEDEC
JEITA
10-04-02
10-04-07
SOT1116
Fig. 24. Package outline SOT1116 (XSON8)
©
74LVC2G53
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
Rev. 14 — 22 April 2021
19 / 23
Nexperia
74LVC2G53
2-channel analog multiplexer/demultiplexer
XSON8: extremely thin small outline package; no leads;
8 terminals; body 1.35 x 1.0 x 0.35 mm
SOT1203
b
4
(2)
(4×)
1
2
3
L
L
1
e
8
7
6
5
e
e
e
1
1
1
(2)
(8×)
A
1
A
D
E
terminal 1
index area
0
L
0.5
scale
1 mm
Dimensions
Unit
(1)
A
A
b
D
E
e
e
1
L
1
1
max 0.35 0.04 0.20 1.40 1.05
0.35 0.40
0.15 1.35 1.00 0.55 0.35 0.30 0.35
0.12 1.30 0.95 0.27 0.32
mm nom
min
Note
1. Including plating thickness.
2. Visible depending upon used manufacturing technology.
sot1203_po
References
Outline
version
European
Issue date
projection
IEC
JEDEC
JEITA
10-04-02
10-04-06
SOT1203
Fig. 25. Package outline SOT1203 (XSON8)
©
74LVC2G53
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
Rev. 14 — 22 April 2021
20 / 23
Nexperia
74LVC2G53
2-channel analog multiplexer/demultiplexer
13. Abbreviations
Table 13. Abbreviations
Acronym
Description
CDM
CMOS
DUT
ESD
HBM
MM
Charged Device Model
Complementary Metal-Oxide Semiconductor
Device Under Test
ElectroStatic Discharge
Human Body Model
Machine Model
TTL
Transistor-Transistor Logic
14. Revision history
Table 14. Revision history
Document ID
Release date Data sheet status
Change notice Supersedes
- 74LVC2G53 v.13
74LVC2G53 v.14
Modifications:
20210422
Product data sheet
•
•
Section 1 and Section 2 updated.
Type number 74LVC2G53GF (SOT1089 / XSON8) removed.
74LVC2G53 v.13
Modifications:
20190731
Product data sheet 74LVC2G53 v.12
-
•
•
Type number 74LVC2G53GM (SOT902-2/XQFN8) removed.
Table 5: Derating values for Ptot total power dissipation updated.
74LVC2G53 v.12
Modifications:
20181116
Type number 74LVC2G53GD (SOT996-2/XSON8) removed.
20170821 Product data sheet 74LVC2G53 v.10
Product data sheet
-
74LVC2G53 v.11
•
74LVC2G53 v.11
Modifications:
-
•
•
The format of this data sheet has been redesigned to comply with the identity
guidelines of Nexperia.
Legal texts have been adapted to the new company name where appropriate.
74LVC2G53 v.10
Modifications:
20161215
Table 7: The maximum limits for leakage current and supply current have changed.
20130405 Product data sheet 74LVC2G53 v.8
For type number 74LVC2G53GD XSON8U has changed to XSON8.
20120622 Product data sheet 74LVC2G53 v.7
For type number 74LVC2G53GM the SOT code has changed to SOT902-2.
Product data sheet
-
74LVC2G53 v.9
•
74LVC2G53 v.9
Modifications:
-
•
74LVC2G53 v.8
Modifications:
-
•
74LVC2G53 v.7
Modifications:
20111125
Product data sheet
-
74LVC2G53 v.6
•
Legal pages updated.
74LVC2G53 v.6
74LVC2G53 v.5
74LVC2G53 v.4
74LVC2G53 v.3
74LVC2G53 v.2
74LVC2G53 v.1
20100927
20080618
20080228
20070828
20060331
20060110
Product data sheet
Product data sheet
Product data sheet
Product data sheet
Product data sheet
Product data sheet
-
-
-
-
-
-
74LVC2G53 v.5
74LVC2G53 v.4
74LVC2G53 v.3
74LVC2G53 v.2
74LVC2G53 v.1
-
©
74LVC2G53
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
Rev. 14 — 22 April 2021
21 / 23
Nexperia
74LVC2G53
2-channel analog multiplexer/demultiplexer
injury, death or severe property or environmental damage. Nexperia and its
suppliers accept no liability for inclusion and/or use of Nexperia products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
15. Legal information
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Data sheet status
Document status Product
Definition
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no representation
or warranty that such applications will be suitable for the specified use
without further testing or modification.
[1][2]
status [3]
Objective [short]
data sheet
Development
This document contains data from
the objective specification for
product development.
Customers are responsible for the design and operation of their applications
and products using Nexperia products, and Nexperia accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Nexperia product is suitable
and fit for the customer’s applications and products planned, as well as
for the planned application and use of customer’s third party customer(s).
Customers should provide appropriate design and operating safeguards to
minimize the risks associated with their applications and products.
Preliminary [short]
data sheet
Qualification
Production
This document contains data from
the preliminary specification.
Product [short]
data sheet
This document contains the product
specification.
[1] Please consult the most recently issued document before initiating or
completing a design.
Nexperia does not accept any liability related to any default, damage, costs
or problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Nexperia products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Nexperia does not accept any
liability in this respect.
[2] The term 'short data sheet' is explained in section "Definitions".
[3] The product status of device(s) described in this document may have
changed since this document was published and may differ in case of
multiple devices. The latest product status information is available on
the internet at https://www.nexperia.com.
Definitions
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those
given in the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain
detailed and full information. For detailed and full information see the relevant
full data sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Terms and conditions of commercial sale — Nexperia products are
sold subject to the general terms and conditions of commercial sale, as
published at http://www.nexperia.com/profile/terms, unless otherwise agreed
in a valid written individual agreement. In case an individual agreement is
concluded only the terms and conditions of the respective agreement shall
apply. Nexperia hereby expressly objects to applying the customer’s general
terms and conditions with regard to the purchase of Nexperia products by
customer.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Nexperia and its customer, unless Nexperia and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be
valid in which the Nexperia product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Disclaimers
Limited warranty and liability — Information in this document is believed
to be accurate and reliable. However, Nexperia does not give any
representations or warranties, expressed or implied, as to the accuracy
or completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no responsibility
for the content in this document if provided by an information source outside
of Nexperia.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Nexperia product is automotive qualified, the
product is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Nexperia
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications.
In no event shall Nexperia be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal
or replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards,
customer (a) shall use the product without Nexperia’s warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
Nexperia’s specifications such use shall be solely at customer’s own risk,
and (c) customer fully indemnifies Nexperia for any liability, damages or failed
product claims resulting from customer design and use of the product for
automotive applications beyond Nexperia’s standard warranty and Nexperia’s
product specifications.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’s aggregate and cumulative liability towards customer
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Nexperia.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
Right to make changes — Nexperia reserves the right to make changes
to information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Trademarks
Suitability for use — Nexperia products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction
of an Nexperia product can reasonably be expected to result in personal
Notice: All referenced brands, product names, service names and
trademarks are the property of their respective owners.
©
74LVC2G53
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
Rev. 14 — 22 April 2021
22 / 23
Nexperia
74LVC2G53
2-channel analog multiplexer/demultiplexer
Contents
1. General description......................................................1
2. Features and benefits.................................................. 1
3. Ordering information....................................................1
4. Marking..........................................................................2
5. Functional diagram.......................................................2
6. Pinning information......................................................2
6.1. Pinning.........................................................................2
6.2. Pin description.............................................................3
7. Functional description................................................. 3
8. Limiting values............................................................. 3
9. Recommended operating conditions..........................4
10. Static characteristics..................................................4
10.1. Test circuits................................................................5
10.2. ON resistance............................................................6
10.3. ON resistance test circuit and graphs........................7
11. Dynamic characteristics...........................................10
11.1. Waveforms and test circuits.....................................11
11.2. Additional dynamic characteristics...........................13
11.3. Test circuits..............................................................13
12. Package outline........................................................ 16
13. Abbreviations............................................................21
14. Revision history........................................................21
15. Legal information......................................................22
© Nexperia B.V. 2021. All rights reserved
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release: 22 April 2021
©
74LVC2G53
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
Rev. 14 — 22 April 2021
23 / 23
相关型号:
74LVC2G53DP-G
IC 2-CHANNEL, SGL ENDED MULTIPLEXER, PDSO8, 3 MM, PLASTIC, SOT-505-2, TSSOP-8, Multiplexer or Switch
NXP
74LVC2G53GT-G
IC 2-CHANNEL, SGL ENDED MULTIPLEXER, PDSO8, 1 X 1.95 MM, 0.50 MM HEIGHT, PLASTIC, MO-252, SOT-833-1, SON-8, Multiplexer or Switch
NXP
©2020 ICPDF网 联系我们和版权申明