74AHC2G08DP [NEXPERIA]
Dual 2-input AND gateProduction;型号: | 74AHC2G08DP |
厂家: | Nexperia |
描述: | Dual 2-input AND gateProduction 栅 光电二极管 逻辑集成电路 触发器 |
文件: | 总14页 (文件大小:191K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
74AHC2G08; 74AHCT2G08
Dual 2-input AND gate
Rev. 6 — 21 March 2018
Product data sheet
1 General description
The 74AHC2G08; 74AHCT2G08 is a high-speed Si-gate CMOS device.
The 74AHC2G08; 74AHCT2G08 provides two 2-input AND gates.
2 Features and benefits
• Symmetrical output impedance
• High noise immunity
• ESD protection:
• – HBM JESD22-A114E exceeds 2000 V
– MM JESD22-A115-A exceeds 200 V
– CDM JESD22-C101C exceeds 1000 V
• Low power dissipation
• Balanced propagation delays
• Multiple package options
• Specified from -40 °C to +80 °C and from -40 °C to +125 °C
3 Ordering information
Table 1.ꢀOrdering information
Type number
Package
Temperature range Name
Description
Version
74AHC2G08DP
74AHCT2G08DP
74AHC2G08DC
74AHCT2G08DC
-40 °C to +125 °C
TSSOP8
plastic thin shrink small outline package; 8 leads;
body width 3 mm; lead length 0.5 mm
SOT505-2
-40 °C to +125 °C
VSSOP8
plastic very thin shrink small outline package; 8 leads; SOT765-1
body width 2.3 mm
Nexperia
74AHC2G08; 74AHCT2G08
Dual 2-input AND gate
4 Marking
Table 2.ꢀMarking
Type number
Marking code[1]
74AHC2G08DP
74AHCT2G08DP
74AHC2G08DC
74AHCT2G08DC
A08
C08
A08
C08
[1] The pin 1 indicator is located on the lower left corner of the device, below the marking code.
5 Functional diagram
1
2
&
7
3
1
2
1A
1B
1Y
2Y
7
3
5
6
5
6
2A
2B
&
mna724
mna725
Figure 1.ꢀ Logic symbol
Figure 2.ꢀ IEC logic symbol
A
B
Y
mna221
Figure 3.ꢀ Logic diagram (one gate)
74AHC_AHCT2G08
All information provided in this document is subject to legal disclaimers.
© Nexperia B.V. 2018. All rights reserved.
Product data sheet
Rev. 6 — 21 March 2018
2 / 14
Nexperia
74AHC2G08; 74AHCT2G08
Dual 2-input AND gate
6 Pinning information
6.1 Pinning
74AHC2G08
74AHCT2G08
1
2
3
4
8
7
6
5
1A
1B
V
CC
1Y
2B
2A
2Y
GND
001aaj389
Figure 4.ꢀ Pin configuration SOT505-2 (TSSOP8) and SOT765-1 (VSSOP8)
6.2 Pin description
Table 3.ꢀPin description
Symbol
1A, 2A
1B, 2B
GND
Pin
1, 5
2, 6
4
Description
data input
data input
ground (0 V)
data output
supply voltage
1Y, 2Y
VCC
7, 3
8
7 Functional description
Table 4.ꢀFunction table
H = HIGH voltage level; L = LOW voltage level.
Input
Output
nA
L
nB
L
nY
L
L
H
L
L
H
H
L
H
H
74AHC_AHCT2G08
All information provided in this document is subject to legal disclaimers.
© Nexperia B.V. 2018. All rights reserved.
Product data sheet
Rev. 6 — 21 March 2018
3 / 14
Nexperia
74AHC2G08; 74AHCT2G08
Dual 2-input AND gate
8 Limiting values
Table 5.ꢀLimiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol
VCC
VI
Parameter
Conditions
Min
-0.5
-0.5
-20
-
Max
+7.0
+7.0
-
Unit
V
supply voltage
input voltage
V
[1]
[1]
IIK
input clamping current
output clamping current
output current
VI < -0.5 V
mA
mA
mA
mA
mA
°C
IOK
VO < -0.5 V or VO > VCC + 0.5 V
-0.5 V < VO < VCC + 0.5 V
±20
±25
75
IO
-
ICC
supply current
-
IGND
Tstg
Ptot
ground current
-75
-65
-
-
storage temperature
total power dissipation
+150
250
[2]
Tamb = -40 °C to +125 °C
mW
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] For SOT505-2 package: above 96 °C the value of Ptot derates linearly with 4.6 mW/K.
For SOT765-1 package: above 99 °C the value of Ptot derates linearly with 4.9 mW/K.
9 Recommended operating conditions
Table 6.ꢀRecommended operating conditions
Voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
74AHC2G08
74AHCT2G08
Unit
Min
2.0
0
Typ
Max
5.5
Min
4.5
0
Typ
Max
VCC
VI
supply voltage
input voltage
5.0
5.0
5.5
5.5
V
V
V
-
5.5
-
VO
output voltage
ambient temperature
0
-
VCC
+125
100
20
0
-
VCC
Tamb
Δt/ΔV
-40
-
+25
-40
-
+25
+125 °C
input transition rise
and fall rate
VCC = 3.3 V ± 0.3 V
VCC = 5.0 V ± 0.5 V
-
-
-
-
-
ns/V
ns/V
-
-
20
74AHC_AHCT2G08
All information provided in this document is subject to legal disclaimers.
© Nexperia B.V. 2018. All rights reserved.
Product data sheet
Rev. 6 — 21 March 2018
4 / 14
Nexperia
74AHC2G08; 74AHCT2G08
Dual 2-input AND gate
10 Static characteristics
Table 7.ꢀStatic characteristics
Voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
25 °C
Min Typ Max
-40 °C to +85 °C -40 °C to +125 °C Unit
Min
Max
Min
Max
74AHC2G08
VIH
HIGH-level
input voltage
VCC = 2.0 V
VCC = 3.0 V
VCC = 5.5 V
VCC = 2.0 V
VCC = 3.0 V
VCC = 5.5 V
VI = VIH or VIL
1.5
-
-
-
-
-
-
-
-
1.5
-
-
1.5
-
-
V
V
V
V
V
V
2.1
2.1
2.1
3.85
-
3.85
-
3.85
-
VIL
LOW-level
input voltage
-
-
-
0.5
0.9
1.65
-
-
-
0.5
0.9
1.65
-
-
-
0.5
0.9
1.65
VOH
HIGH-level
output voltage
IO = -50 μA; VCC = 2.0 V
1.9
2.9
4.4
2.0
3.0
4.5
-
-
-
-
-
-
1.9
2.9
-
-
-
-
-
1.9
2.9
-
-
-
-
-
V
V
V
V
V
IO = -50 μA; VCC = 3.0 V
IO = -50 μA; VCC = 4.5 V
4.4
4.4
IO = -4.0 mA; VCC = 3.0 V 2.58
IO = -8.0 mA; VCC = 4.5 V 3.94
2.48
3.8
2.40
3.70
-
VOL
LOW-level
VI = VIH or VIL
output voltage
IO = 50 μA; VCC = 2.0 V
-
-
-
-
-
-
0
0
0
-
0.1
0.1
-
-
-
-
-
-
0.1
0.1
-
-
-
-
-
-
0.1
0.1
V
IO = 50 μA; VCC = 3.0 V
IO = 50 μA; VCC = 4.5 V
IO = 4.0 mA; VCC = 3.0 V
IO = 8.0 mA; VCC = 4.5 V
V
0.1
0.1
0.1
V
0.36
0.36
0.1
0.44
0.44
1.0
0.55
0.55
2.0
V
-
V
II
input leakage VI = 5.5 V or GND;
current VCC = 0 V to 5.5 V
-
μA
ICC
supply current VI = VCC or GND; IO = 0 A;
VCC = 5.5 V
-
-
-
1.0
10
-
-
10
10
-
-
40
10
μA
pF
CI
input
1.5
capacitance
74AHC_AHCT2G08
All information provided in this document is subject to legal disclaimers.
© Nexperia B.V. 2018. All rights reserved.
Product data sheet
Rev. 6 — 21 March 2018
5 / 14
Nexperia
74AHC2G08; 74AHCT2G08
Dual 2-input AND gate
Symbol Parameter
74AHCT2G08
Conditions
25 °C
Min Typ Max
-40 °C to +85 °C -40 °C to +125 °C Unit
Min
Max
Min
Max
VIH
HIGH-level
input voltage
VCC = 4.5 V to 5.5 V
VCC = 4.5 V to 5.5 V
2.0
-
-
-
-
2.0
-
-
2.0
-
-
V
V
VIL
LOW-level
0.8
0.8
0.8
input voltage
VOH
HIGH-level
output voltage
VI = VIH or VIL; VCC = 4.5 V
IO = -50 μA
4.4
4.5
-
-
-
4.4
3.8
-
-
4.4
-
-
V
V
IO = -8.0 mA
3.94
3.70
VOL
LOW-level
output voltage
VI = VIH or VIL; VCC = 4.5 V
IO = 50 μA
-
-
-
0
-
0.1
0.36
0.1
-
-
-
0.1
0.44
1.0
-
-
-
0.1
0.55
2.0
V
IO = 8.0 mA
V
II
input leakage VI = 5.5 V or GND;
current VCC = 0 V to 5.5 V
-
μA
ICC
supply current VI = VCC or GND; IO = 0 A;
VCC = 5.5 V
-
-
-
-
1.0
-
-
10
-
-
40
μA
ΔICC
additional
per input pin; VI = 3.4 V;
1.35
1.5
1.5
mA
supply current other inputs at VCC or GND;
IO = 0 A; VCC = 5.5 V
CI
input
-
1.5
10
-
10
-
10
pF
capacitance
11 Dynamic characteristics
Table 8.ꢀDynamic characteristics
GND = 0 V; for test circuit see Figure 6.
Symbol Parameter Conditions
74AHC2G08
25 °C
-40 °C to +85 °C -40 °C to +125 °C Unit
Min Typ Max
Min
Max
Min
Max
[1]
[2]
tpd
propagation nA, nB to nY; see Figure 5
delay
VCC = 3.0 V to 3.6 V
CL = 15 pF
CL = 50 pF
-
-
4.6
8.8
1.0
1.0
10.5
14.0
1.0
1.0
12.0
16.0
ns
ns
6.5 12.3
[3]
[4]
VCC = 4.5 V to 5.5 V
CL = 15 pF
-
-
-
3.2
4.6
17
5.9
7.9
-
1.0
1.0
-
7.0
9.0
-
1.0
1.0
-
8.0
10.5
-
ns
ns
pF
CL = 50 pF
CPD
power
dissipation
per buffer; CL = 50 pF;
fi = 1 MHz;
capacitance VI = GND to VCC
74AHC_AHCT2G08
All information provided in this document is subject to legal disclaimers.
© Nexperia B.V. 2018. All rights reserved.
Product data sheet
Rev. 6 — 21 March 2018
6 / 14
Nexperia
74AHC2G08; 74AHCT2G08
Dual 2-input AND gate
Symbol Parameter Conditions
74AHCT2G08
25 °C
Min Typ Max
-40 °C to +85 °C -40 °C to +125 °C Unit
Min
Max
Min
Max
[1]
[3]
tpd
propagation nA, nB to nY; see Figure 5
delay
VCC = 4.5 V to 5.5 V
CL = 15 pF
-
-
-
3.6
5.1
19
6.2
7.9
-
1.0
1.0
-
7.1
9.0
-
1.0
1.0
-
8.0
10.5
-
ns
ns
pF
CL = 50 pF
[4]
CPD
power
dissipation
per buffer; CL = 50 pF;
fi = 1 MHz;
capacitance VI = GND to VCC
[1] tpd is the same as tPLH and tPHL
.
[2] Typical values are measured at VCC = 3.3 V.
[3] Typical values are measured at VCC = 5.0 V.
[4] CPD is used to determine the dynamic power dissipation (PD in μW).
PD = CPD x VCC2 x fi x N + Σ(CL x VCC2 x fo) where:
fi = input frequency in MHz;
fo = output frequency in MHz;
CL = output load capacitance in pF;
VCC = supply voltage in V;
N = number of inputs switching;
Σ(CL x VCC2 x fo) = sum of the outputs.
11.1 Waveform and test circuit
V
I
V
M
nA, nB input
GND
t
t
PLH
PHL
V
OH
nY output
V
M
V
OL
mna224
Measurement points are given in Table 9.
Logic levels: VOL and VOH are typical output voltage levels that occur with the output load.
Figure 5.ꢀ The input (nA and nB) to output (nY) propagation delays
Table 9.ꢀMeasurement points
Type
Input
VM
Output
VM
74AHC2G08
0.5VCC
1.5 V
0.5VCC
0.5VCC
74AHCT2G08
74AHC_AHCT2G08
All information provided in this document is subject to legal disclaimers.
© Nexperia B.V. 2018. All rights reserved.
Product data sheet
Rev. 6 — 21 March 2018
7 / 14
Nexperia
74AHC2G08; 74AHCT2G08
Dual 2-input AND gate
t
W
V
I
90 %
negative
pulse
V
V
V
M
M
10 %
0 V
t
t
r
f
t
t
f
r
V
I
90 %
positive
pulse
V
M
M
10 %
0 V
t
W
V
V
CC
CC
V
I
V
O
R
L
S1
G
open
DUT
R
T
C
L
001aad983
Test data is given in Table 10.
Definitions test circuit:
RT = Termination resistance should be equal to output impedance Zo of the pulse generator.
CL = Load capacitance including jig and probe capacitance.
RL = Load resistance.
S1 = Test selection switch.
Figure 6.ꢀ Test circuit for measuring switching times
Table 10.ꢀTest data
Type
Input
VI
Load
S1 position
tPHL, tPLH
open
tr, tf
CL
RL
tPZH, tPHZ
GND
tPZL, tPLZ
VCC
74AHC2G08
VCC
3 V
≤ 3 ns
≤ 3 ns
15 pF, 50 pF
15 pF, 50 pF
1 kΩ
1 kΩ
74AHCT2G08
open
GND
VCC
74AHC_AHCT2G08
All information provided in this document is subject to legal disclaimers.
© Nexperia B.V. 2018. All rights reserved.
Product data sheet
Rev. 6 — 21 March 2018
8 / 14
Nexperia
74AHC2G08; 74AHCT2G08
Dual 2-input AND gate
12 Package outline
TSSOP8: plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mm
SOT505-2
D
E
A
X
c
H
v
M
y
A
E
Z
5
8
A
2
A
(A )
3
A
1
pin 1 index
θ
L
p
L
detail X
1
4
e
w
M
b
p
0
2.5
5 mm
scale
DIMENSIONS (mm are the original dimensions)
A
(1)
(1)
(1)
A
A
A
b
c
D
E
e
H
E
L
L
p
UNIT
v
w
y
Z
θ
1
2
3
p
max.
0.15
0.00
0.95
0.75
0.38
0.22
0.18
0.08
3.1
2.9
3.1
2.9
4.1
3.9
0.47
0.33
0.70
0.35
8°
0°
mm
1.1
0.65
0.5
0.2
0.13
0.1
0.25
Note
1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.
REFERENCES
OUTLINE
EUROPEAN
PROJECTION
ISSUE DATE
VERSION
IEC
JEDEC
JEITA
02-01-16
SOT505-2
- - -
Figure 7.ꢀ Package outline SOT505-2 (TSSOP8)
74AHC_AHCT2G08
All information provided in this document is subject to legal disclaimers.
© Nexperia B.V. 2018. All rights reserved.
Product data sheet
Rev. 6 — 21 March 2018
9 / 14
Nexperia
74AHC2G08; 74AHCT2G08
Dual 2-input AND gate
VSSOP8: plastic very thin shrink small outline package; 8 leads; body width 2.3 mm
SOT765-1
D
E
A
X
c
y
H
E
v
A
Z
5
8
Q
A
2
A
A
(A )
3
1
pin 1 index
θ
L
p
detail X
1
4
L
e
w
b
p
0
5 mm
scale
Dimensions (mm are the original dimensions)
A
(1)
(2)
(1)
Unit
A
A
A
b
c
D
E
e
H
E
L
L
p
Q
v
w
y
Z
θ
1
2
3
p
max.
max
mm nom
min
0.15 0.85
0.00 0.60
0.27 0.23 2.1 2.4
0.17 0.08 1.9 2.2
3.2
3.0
0.40 0.21
0.15 0.19
0.4
8°
0°
1
0.12
0.5
0.4
0.2 0.08 0.1
0.1
Note
1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.
2. Plastic or metal protrusions of 0.25 mm maximum per side are not included.
sot765-1_po
References
Outline
version
European
projection
Issue date
IEC
JEDEC
JEITA
07-06-02
16-05-31
SOT765-1
MO-187
Figure 8.ꢀ Package outline SOT765-1 (VSSOP8)
74AHC_AHCT2G08
All information provided in this document is subject to legal disclaimers.
© Nexperia B.V. 2018. All rights reserved.
Product data sheet
Rev. 6 — 21 March 2018
10 / 14
Nexperia
74AHC2G08; 74AHCT2G08
Dual 2-input AND gate
13 Abbreviations
Table 11.ꢀAbbreviations
Acronym
CDM
Description
Charged Device Model
Complementary Metal-Oxide Semiconductor
Device Under Test
CMOS
DUT
ESD
ElectroStatic Discharge
Human Body Model
HBM
MM
Machine Model
14 Revision history
Table 12.ꢀRevision history
Document ID
Release date
20180321
Data sheet status
Change notice Supersedes
74AHC_AHCT2G08 v.6
Modifications:
Product data sheet
-
74AHC_AHCT2G08 v.5
• The format of this data sheet has been redesigned to comply with the identity guidelines of
Nexperia.
• Legal texts have been adapted to the new company name where appropriate.
• Table 5: total power dissipation derating factors have changed.
• Type number 74AHC2G08GD and 74AHCT2G08GD (SOT996-2/XSON8) removed .
74AHC_AHCT2G08 v.5
Modifications:
20131127
• General description updated (errata).
20130513 Product data sheet
Product data sheet
-
-
74AHC_AHCT2G08 v.4
74AHC_AHCT2G08 v.3
74AHC_AHCT2G08 v.4
Modifications:
• For type number 74AHC2G08GD and 74AHCT2G08GD XSON8U has changed to XSON8.
74AHC_AHCT2G08 v.3
74AHC_AHCT2G08 v.2
74AHC_AHCT2G08 v.1
20090112
20041018
20040206
Product data sheet
Product data sheet
Product specification
-
-
-
74AHC_AHCT2G08 v.2
74AHC_AHCT2G08 v.1
-
74AHC_AHCT2G08
All information provided in this document is subject to legal disclaimers.
© Nexperia B.V. 2018. All rights reserved.
Product data sheet
Rev. 6 — 21 March 2018
11 / 14
Nexperia
74AHC2G08; 74AHCT2G08
Dual 2-input AND gate
15 Legal information
15.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product
development.
Preliminary [short] data sheet
Product [short] data sheet
Qualification
Production
This document contains data from the preliminary specification.
This document contains the product specification.
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term 'short data sheet' is explained in section "Definitions".
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple
devices. The latest product status information is available on the Internet at URL http://www.nexperia.com.
systems or equipment, nor in applications where failure or malfunction
of an Nexperia product can reasonably be expected to result in personal
15.2 Definitions
injury, death or severe property or environmental damage. Nexperia and its
suppliers accept no liability for inclusion and/or use of Nexperia products in
Draft — The document is a draft version only. The content is still under
such equipment or applications and therefore such inclusion and/or use is at
internal review and subject to formal approval, which may result in
the customer’s own risk.
modifications or additions. Nexperia does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no representation
or warranty that such applications will be suitable for the specified use
Short data sheet — A short data sheet is an extract from a full data sheet
without further testing or modification. Customers are responsible for the
with the same product type number(s) and title. A short data sheet is
design and operation of their applications and products using Nexperia
intended for quick reference only and should not be relied upon to contain
products, and Nexperia accepts no liability for any assistance with
detailed and full information. For detailed and full information see the
applications or customer product design. It is customer’s sole responsibility
relevant full data sheet, which is available on request via the local Nexperia
to determine whether the Nexperia product is suitable and fit for the
sales office. In case of any inconsistency or conflict with the short data sheet,
customer’s applications and products planned, as well as for the planned
the full data sheet shall prevail.
application and use of customer’s third party customer(s). Customers should
provide appropriate design and operating safeguards to minimize the risks
associated with their applications and products. Nexperia does not accept
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
any liability related to any default, damage, costs or problem which is based
Nexperia and its customer, unless Nexperia and customer have explicitly
on any weakness or default in the customer’s applications or products, or
agreed otherwise in writing. In no event however, shall an agreement be
the application or use by customer’s third party customer(s). Customer is
valid in which the Nexperia product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
responsible for doing all necessary testing for the customer’s applications
and products using Nexperia products in order to avoid a default of the
applications and the products or of the application or use by customer’s third
party customer(s). Nexperia does not accept any liability in this respect.
15.3 Disclaimers
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
Limited warranty and liability — Information in this document is believed
damage to the device. Limiting values are stress ratings only and (proper)
to be accurate and reliable. However, Nexperia does not give any
operation of the device at these or any other conditions above those
representations or warranties, expressed or implied, as to the accuracy
given in the Recommended operating conditions section (if present) or the
or completeness of such information and shall have no liability for the
Characteristics sections of this document is not warranted. Constant or
consequences of use of such information. Nexperia takes no responsibility
repeated exposure to limiting values will permanently and irreversibly affect
for the content in this document if provided by an information source outside
the quality and reliability of the device.
of Nexperia. In no event shall Nexperia be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation -
lost profits, lost savings, business interruption, costs related to the removal
Terms and conditions of commercial sale — Nexperia products are
sold subject to the general terms and conditions of commercial sale, as
or replacement of any products or rework charges) whether or not such
published at http://www.nexperia.com/profile/terms, unless otherwise agreed
damages are based on tort (including negligence), warranty, breach of
in a valid written individual agreement. In case an individual agreement is
contract or any other legal theory. Notwithstanding any damages that
concluded only the terms and conditions of the respective agreement shall
customer might incur for any reason whatsoever, Nexperia's aggregate and
apply. Nexperia hereby expressly objects to applying the customer’s general
cumulative liability towards customer for the products described herein shall
terms and conditions with regard to the purchase of Nexperia products by
customer.
be limited in accordance with the Terms and conditions of commercial sale of
Nexperia.
No offer to sell or license — Nothing in this document may be interpreted
Right to make changes — Nexperia reserves the right to make changes
or construed as an offer to sell products that is open for acceptance or
to information published in this document, including without limitation
the grant, conveyance or implication of any license under any copyrights,
patents or other industrial or intellectual property rights.
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Suitability for use — Nexperia products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
74AHC_AHCT2G08
All information provided in this document is subject to legal disclaimers.
© Nexperia B.V. 2018. All rights reserved.
Product data sheet
Rev. 6 — 21 March 2018
12 / 14
Nexperia
74AHC2G08; 74AHCT2G08
Dual 2-input AND gate
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Nexperia product is automotive qualified, the
product is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Nexperia
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications. In the event that customer
uses the product for design-in and use in automotive applications to
automotive specifications and standards, customer (a) shall use the product
without Nexperia's warranty of the product for such automotive applications,
use and specifications, and (b) whenever customer uses the product for
automotive applications beyond Nexperia's specifications such use shall be
solely at customer’s own risk, and (c) customer fully indemnifies Nexperia
for any liability, damages or failed product claims resulting from customer
design and use of the product for automotive applications beyond Nexperia's
standard warranty and Nexperia's product specifications.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
15.4 Trademarks
Notice: All referenced brands, product names, service names and
trademarks are the property of their respective owners.
74AHC_AHCT2G08
All information provided in this document is subject to legal disclaimers.
© Nexperia B.V. 2018. All rights reserved.
Product data sheet
Rev. 6 — 21 March 2018
13 / 14
Nexperia
74AHC2G08; 74AHCT2G08
Dual 2-input AND gate
Contents
1
General description ............................................ 1
2
3
4
5
Features and benefits .........................................1
Ordering information .......................................... 1
Marking .................................................................2
Functional diagram .............................................2
Pinning information ............................................ 3
Pinning ...............................................................3
Pin description ...................................................3
Functional description ........................................3
Limiting values ....................................................4
Recommended operating conditions ................4
Static characteristics ..........................................5
Dynamic characteristics .....................................6
Waveform and test circuit ..................................7
Package outline ...................................................9
Abbreviations .................................................... 11
Revision history ................................................ 11
Legal information ..............................................12
6
6.1
6.2
7
8
9
10
11
11.1
12
13
14
15
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section 'Legal information'.
© Nexperia B.V. 2018.
All rights reserved.
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release: 21 March 2018
Document identifier: 74AHC_AHCT2G08
相关型号:
74AHC2G125DC-Q100
AHC/VHC/H/U/V SERIES, DUAL 1-BIT DRIVER, TRUE OUTPUT, PDSO8, 2.30 MM, PLASTIC, MO-187, SOT765-1, VSSOP-8
NXP
©2020 ICPDF网 联系我们和版权申明