PS7801C-1A-F3 [NEC]
4-PIN ULTRA SMALL FLAT-LEAD, SUPER LOW OUTPUT CAPACITANCE, 1-ch Optical Coupled MOS FET; 4 -PIN超小型FLAT -LEAD ，超低输出电容， 1路光纤耦合MOS FET
| 型号： | PS7801C-1A-F3 |
| 厂家： | 
NEC |
| 描述： | 4-PIN ULTRA SMALL FLAT-LEAD, SUPER LOW OUTPUT CAPACITANCE, 1-ch Optical Coupled MOS FET |
| 文件： | 总13页 (文件大小：107K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DATA SHEET
Solid State Relay
OCMOS FET
PS7801C-1A
4-PIN ULTRA SMALL FLAT-LEAD,
SUPER LOW OUTPUT CAPACITANCE,
1-ch Optical Coupled MOS FET
−NEPOC Series−
DESCRIPTION
The PS7801C-1A is a low output capacitance solid state relay containing a GaAs LED on the light emitting side
(input side) and MOS FETs on the output side.
An ultra small flat-lead package has been provided which realizes a reduction in mounting area of about 50%
compared with the PS72xx series.
It is suitable for high-frequency signal control, due to its low C × R, super low output capacitance, and low off-state
leakage current.
FEATURES
PIN CONNECTION
•
•
•
•
•
•
•
•
•
Ultra small flat-lead package (4.2 (L) × 2.5 (W) × 1.85 (H) mm)
Super low output capacitance (Cout = 0.5 pF TYP.)
Low C × R (C × R = 6.5 pF • Ω)
(Top View)
4
3
1 channel type (1 a output)
1. LED Anode
Designed for AC/DC switching line changer
Low offset voltage
2. LED Cathode
3. MOS FET
4. MOS FET
<R>
<R>
<R>
Ordering number of taping product: PS7801C-1A-F3 (3 500 pcs/reel)
Pb-Free product
1
2
Safety standards
•
UL approved: File No. E72422
APPLICATIONS
•
Measurement equipment
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. PN10549EJ02V0DS (2nd edition)
Date Published January 2008 NS
Printed in Japan
2004, 2008
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
PS7801C-1A
PACKAGE DIMENSIONS (UNIT: mm)
2.5 0.3
0.2 MAX.
4
3
N
1
2
3.0 MAX.
4.6 0.2
0.4 0.1
0.2 0.1
1.27
<R>
MARKING EXAMPLE
Last number of
type No. : 1C*1
*2
1C
N
An initial of "NEC"
Assembly lot
801
No.1 pin
mark
(Nicked
corner)
8 01 (Marking details)
Week assembled
Year assembled
*1 The marking corresponds to the last two digits
of the part number below.
PS7801C-1A
*2 Bar : Pb-Free
2
Data Sheet PN10549EJ02V0DS
PS7801C-1A
<R>
ORDERING INFORMATION
Solder Plating
Specification
Safety Standard
Approval
Application
Part Number
Order Number
Packing Style
Part Number*1
PS7801C-1A
PS7801C-1A-A
Pb-Free
50 pcs (Tape 50 pcs cut)
Standard products PS7801C-1A
PS7801C-1A-F3
PS7801C-1A-F3-A
Embossed Tape 3 500 pcs/reel (UL approved)
*1 For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter
Symbol
IF
Ratings
50
Unit
mA
V
Diode
Forward Current (DC)
Reverse Voltage
Power Dissipation
Peak Forward Current*1
VR
5.0
50
PD
mW
A
IFP
1
MOS FET Break Down Voltage
Continuous Load Current
VL
30
V
IL
80
mA
mA
Pulse Load Current*2
(AC/DC Connection)
ILP
160
Power Dissipation
Isolation Voltage*3
PD
BV
PT
250
500
mW
Vr.m.s.
mW
°C
Total Power Dissipation
Operating Ambient Temperature
Storage Temperature
300
TA
−40 to +85
−40 to +100
Tstg
°C
*1 PW = 100 μs, Duty Cycle = 1%
*2 PW = 100 ms, 1 shot
*3 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.
Pins 1-2 shorted together, 3-4 shorted together.
RECOMMENDED OPERATING CONDITIONS (TA = 25°C)
Parameter
LED Operating Current
LED Off Voltage
Symbol
MIN.
TYP.
5
MAX.
20
Unit
mA
V
IF
2
0
VF
0.5
3
Data Sheet PN10549EJ02V0DS
PS7801C-1A
ELECTRICAL CHARACTERISTICS (TA = 25°C)
Parameter
Symbol
VF
Conditions
MIN.
TYP.
1.1
MAX.
1.4
Unit
V
Diode
Forward Voltage
Reverse Current
IF = 5 mA
VR = 5 V
VD = 30 V
IR
5.0
μA
nA
MOS FET Off-state Leakage
Current
ILoff
0.1
0.5
1.0
Output Capacitance
Cout
IFon
Ron1
Ron2
ton
VD = 0 V, f = 1 MHz
IL = 80 mA
0.7
2.0
17
pF
mA
Ω
Coupled
LED On-state Current
On-state Resistance
<R>
IF = 5 mA, IL = 10 mA
IF = 5 mA, IL = 80 mA
IF = 5 mA, VO = 5 V, RL = 500 Ω,
PW ≥ 10 ms
12.5
13
17
Turn-on Time*1, 2
0.03
0.1
0.5
0.5
ms
Turn-off Time*1, 2
toff
Isolation Resistance
Isolation Capacitance
RI-O
CI-O
VI-O = 0.5 kVDC
109
Ω
V = 0 V, f = 1 MHz
0.3
pF
*1 Test Circuit for Switching Time
IF
Input
50%
0
Pulse Input
V
V
L
V
O
= 5 V
90%
10%
Input monitor
O
monitor
Output
R
in
R
L
t
on
t
off
*2 The turn-on time and turn-off time are specified as input-pulse width ≥ 10 ms.
Be aware that when the device operates with an input-pulse width less than 10 ms, the turn-on time and turn-off
time will increase.
4
Data Sheet PN10549EJ02V0DS
PS7801C-1A
<R>
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
MAXIMUM FORWARD CURRENT vs.
AMBIENT TEMPERATURE
MAXIMUM LOAD CURRENT vs.
AMBIENT TEMPERATURE
100
80
100
80
60
40
20
0
60
40
20
0
85
85
–25
0
25
50
75
(˚C)
100
–25
0
25
50
75
(˚C)
100
Ambient Temperature T
A
Ambient Temperature T
A
OUTPUT CAPACITANCE vs.
APPLIED VOLTAGE
FORWARD VOLTAGE vs.
AMBIENT TEMPERATURE
1.6
1.4
1.2
1
0.8
0.6
0.4
0.2
f = 1 MHz
I = 50 mA
F
30 mA
20 mA
10 mA
5 mA
1 mA
1.0
0.8
–25
0
25
50
75
(˚C)
100
0
5
10
15
20
25
30
35
Applied Voltage V
D
(V)
Ambient Temperature T
A
OFF-STATE LEAKAGE CURRENT vs.
AMBIENT TEMPERATURE
LOAD CURRENT vs. LOAD VOLTAGE
10–9
10–10
10–11
10–12
10–13
100
VD = 30 V
IF = 5 mA
80
60
40
20
–1.5 –1.0
–0.5
0.5
1.0
1.5
0
–20
–40
–60
–80
–100
0
20
40
60
80
(˚C)
100
Ambient Temperature T
A
Load Voltage V (V)
L
Remark The graphs indicate nominal characteristics.
5
Data Sheet PN10549EJ02V0DS
PS7801C-1A
NORMALIZED ON-STATE RESISTANCE vs.
AMBIENT TEMPERATURE
ON-STATE RESISTANCE DISTRIBUTION
3.0
60
50
40
30
20
10
0
n = 50 pcs,
Normalized to 1.0
I
F
= 5 mA,
= 80 mA
at T = 25˚C,
A
2.5
IL
I
I
F
= 5 mA,
= 80 mA
L
2.0
1.5
1.0
0.5
0.0
12.5 13.0
13.5
14.0
14.5
–25
0
25
50
75
100
On-state Resistance Ron (Ω)
Ambient Temperature T (˚C)
A
TURN-ON TIME vs. FORWARD CURRENT
TURN-OFF TIME vs. FORWARD CURRENT
250
200
VO
= 5 V,
VO
= 5 V,
R
L
= 500 Ω
R
L
= 500 Ω
200
150
100
50
160
120
80
μ
μ
40
0
5
10
15
20
25
0
5
10
15
20
25
Forward Current I
F
(mA)
Forward Current I
F
(mA)
TURN-OFF TIME DISTRIBUTION
TURN-ON TIME DISTRIBUTION
60
50
40
30
20
10
0
60
50
40
30
20
10
0
n = 50 pcs,
n = 50 pcs,
I = 5 mA,
F
I = 5 mA,
F
V
O
= 5 V,
V
O
= 5 V,
R
L
= 500 Ω
R
L
= 500 Ω
0.04
0.05
0.06
0.07
0.08
0.01 0.02
0.03
0.04
0.05
Turn-off Time toff (ms)
Turn-on Time ton (ms)
Remark The graphs indicate nominal characteristics.
6
Data Sheet PN10549EJ02V0DS
PS7801C-1A
NORMALIZED TURN-OFF TIME vs.
AMBIENT TEMPERATURE
NORMALIZED TURN-ON TIME vs.
AMBIENT TEMPERATURE
3.0
2.5
2.0
1.5
1.0
3.0
2.5
2.0
1.5
1.0
Normalized to 1.0
at TA = 25˚C,
IF = 5 mA, VO = 5 V,
RL = 500 Ω
Normalized to 1.0
at TA = 25˚C,
IF = 5 mA, VO = 5 V,
RL = 500 Ω
0.5
0.0
0.5
0.0
–50
–25
0
25
50
75
100
–50
–25
0
25
50
75
100
Ambient Temperature TA (˚C)
Ambient Temperature TA (˚C)
Remark The graphs indicate nominal characteristics.
7
Data Sheet PN10549EJ02V0DS
PS7801C-1A
<R>
TAPING SPECIFICATIONS (UNIT: mm)
Outline and Dimensions (Tape)
2.0 0.05
+0.1
–0
4.0 0.1
1.5
2.9 MAX.
0.3
1.55 0.05
2.4 0.1
2.9 0.1
4.0 0.1
Tape Direction
PS7801C-1A-F3
N
N
N
N
Outline and Dimensions (Reel)
2.0 0.5
2.0 0.5
13.0 0.2
φ
φ
R 1.0
φ
φ
φ
21.0 0.8
13.5 1.0
17.5 1.0
11.9 to 15.4
Outer edge of
flange
Packing: 3 500 pcs/reel
8
Data Sheet PN10549EJ02V0DS
PS7801C-1A
<R>
RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm)
1.27
0.8
0.6
(
) : Reference value
24-R0.1
Remark All dimensions in this figure must be evaluated before use.
9
Data Sheet PN10549EJ02V0DS
PS7801C-1A
<R>
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering
• Peak reflow temperature
260°C or below (package surface temperature)
10 seconds or less
• Time of peak reflow temperature
• Time of temperature higher than 220°C
60 seconds or less
• Time to preheat temperature from 120 to 180°C 120 30 s
• Number of reflows
• Flux
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260˚C MAX.
220˚C
to 60 s
180˚C
120˚C
120 30 s
(preheating)
Time (s)
(2) Wave soldering
• Temperature
• Time
260°C or below (molten solder temperature)
10 seconds or less
• Preheating conditions
• Number of times
• Flux
120°C or below (package surface temperature)
One
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by soldering iron
• Peak temperature (lead part temperature)
• Time (each pins)
350°C or below
3 seconds or less
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
10
Data Sheet PN10549EJ02V0DS
PS7801C-1A
<R>
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
11
Data Sheet PN10549EJ02V0DS
PS7801C-1A
•
The information in this document is current as of January, 2008. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC Electronics data
sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not
all products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
• No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
•
NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
•
• While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
• NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1)
"NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2)
"NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
M8E 02. 11-1
12
Data Sheet PN10549EJ02V0DS
PS7801C-1A
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
Caution GaAs Products
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
相关型号：
PS7801C-1A-F3-A
4-PIN ULTRA SMALL FLAT-LEAD, SUPER LOW OUTPUT CAPACITANCE, 1-ch Optical Coupled MOS FET
NEC
PS7801C-1A-F4
NECs 4-PIN ULTRA SMALL FLAT-LEAD SUPER LOW OUTPUT CAPACITANCE 1-ch OPTICAL COUPLED MOS FET
CEL
PS7801C-1A-F4-A
Transistor Output SSR, 1-Channel, 500V Isolation, 4.20 X 2.50 MM, 1.85 MM HEIGHT, LEAD FREE, ULTRA SMALL, FLAT PACKAGE-4
NEC
PS7801D-1A
4-PIN ULTRA SMALL FLAT-LEAD, LOW OUTPUT CAPACITANCE (0.6 pF), 1-ch Optical Coupled MOS FET
NEC
PS7801D-1A-A
4-PIN ULTRA SMALL FLAT-LEAD, LOW OUTPUT CAPACITANCE (0.6 pF) 1-ch Optical Coupled MOS FET
NEC
PS7801D-1A-F3
4-PIN ULTRA SMALL FLAT-LEAD, LOW OUTPUT CAPACITANCE (0.6 pF), 1-ch Optical Coupled MOS FET
NEC
PS7801D-1A-F3-A
4-PIN ULTRA SMALL FLAT-LEAD, LOW OUTPUT CAPACITANCE (0.6 pF) 1-ch Optical Coupled MOS FET
NEC
PS7801D-1A-F4
4-PIN ULTRA SMALL FLAT-LEAD, LOW OUTPUT CAPACITANCE (0.6 pF), 1-ch Optical Coupled MOS FET
NEC
PS7801D-1A-F4-A
Transistor Output SSR, 1-Channel, 500V Isolation, 4.20 X 2.50 MM, 1.85 MM HEIGHT, LEAD FREE, ULTRA SMALL, FLAT PACKAGE-4
NEC
PS7801D-1A_1
4-PIN ULTRA SMALL FLAT-LEAD, LOW OUTPUT CAPACITANCE (0.6 pF) 1-ch Optical Coupled MOS FET
NEC
©2020 ICPDF网 联系我们和版权申明