RP1298-2 [MURATA]

423.22 MHz SAW Resonator;
RP1298-2
型号: RP1298-2
厂家: muRata    muRata
描述:

423.22 MHz SAW Resonator

文件: 总2页 (文件大小:127K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
RP1298-2  
Ideal for 433.92 MHz Superhet Receiver LOs  
Nominal Insertion Phase Shift of 180° at Resonance  
Quartz Stability  
423.22 MHz  
SAW  
Rugged, Hermetic, Low-Profile TO39 Case  
Complies with Directive 2002/95/EC (RoHS)  
Pb  
Resonator  
The RP1298-2 is a two-port, 180° surface-acoustic-wave (SAW) resonator in a low-profile TO39 case. It pro-  
vides reliable, fundamental-mode, quartz frequency stabilization of local oscillators operating at approxi-  
mately 423.22 MHz. The RP1298-2 is designed for 433.92 MHz superhet receivers in remote-control and  
wireless security applications operating in Europe under ETSI I-ETS 300 220 and in Germany under FTZ 17  
TR 2100.  
Absolute Maximum Ratings  
Rating  
Value  
+0  
Units  
dBm  
VDC  
°C  
CW RF Power Dissipation (See: Typical Test Circuit)  
DC Voltage Between Any Two Pins (Observe ESD Precautions)  
Case Temperature  
±30  
TO39-3 Case  
-40 to +85  
Electrical Characteristics  
Characteristic  
Sym  
Notes  
Minimum  
Typical  
Maximum  
Units  
Center Frequency  
fC  
Absolute Frequency  
423.145  
423.295  
MHz  
2, 3, 4, 5,  
ΔfC  
IL  
Tolerance from 423.220 MHz  
±75  
8.0  
kHz  
dB  
Insertion Loss  
Quality Factor  
2, 5, 6  
5, 6, 7  
5.2  
15,200  
6,900  
39  
QU  
QL  
TO  
fO  
Unloaded Q  
50 Ω Loaded Q  
Temperature Stability  
Turnover Temperature  
Turnover Frequency  
Frequency Temp. Coefficient  
Absolute Value during First Year  
24  
1.0  
2.2  
54  
°C  
fC+2.6  
0.037  
10  
6, 7, 8  
kHz  
ppm/°C2  
ppm/yr  
FTC  
|fA|  
Frequency Aging  
6
5
DC Insulation Resistance between Any Two Pins  
MΩ  
Ω
RF Equivalent RLC  
RM  
LM  
CM  
CO  
Motional Resistance  
Motional Inductance  
Motional Capacitance  
Shunt Static Capacitance  
82  
152  
2.8  
5, 7, 9  
5, 6, 9  
475.283  
0.297547  
2.5  
µH  
fF  
pF  
Lid Symbolization (in addition to Lot and/or Date Codes)  
RP1298-2  
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.  
Notes:  
1. Frequency aging is the change in fC with time and is specified at +65°C or less. Aging may exceed the specification for prolonged temperatures  
above +65°C. Typically, aging is greatest the first year after manufacture, decreasing significantly in subsequent years.  
2. The frequency fC is the frequency of minimum IL with the resonator in the specified test fixture in a 50 Ω test system with VSWR 1.2:1. Typically,  
fOSCILLATOR or fTRANSMITTER is less than the resonator fC.  
3. One or more of the following United States patents apply: 4,454,488; 4,616,197.  
4. Typically, equipment utilizing this device requires emissions testing and government approval, which is the responsibility of the equipment manufac-  
turer.  
5. Unless noted otherwise, case temperature TC = +25°C± 5°C  
6. The design, manufacturing process, and specifications of this device are subject to change without notice.  
7. Derived mathematically from one or more of the following directly measured parameters: fC, IL, 3 dB bandwidth, fC versus TC, and CO.  
8. Turnover temperature, TO, is the temperature of maximum (or turnover) frequency, fO. The nominal frequency at any case temperature, TC, may be  
calculated from: f = fO [1 - FTC (TO - TC)2]. Typically, oscillator TO is 20° less than the specified resonator TO.  
9. This equivalent RLC model approximates resonator performance near the resonant frequency and is provided for reference only. The capacitance  
CO is the measured static (nonmotional) capacitance between either pin 1 and ground or pin 2 and ground. The measurement includes case parasitic  
capacitance.  
RF Monolithics, Inc.  
RFM Europe  
Phone: (972) 233-2903  
Phone: 44 1963 251383  
Fax: (972) 387-9148  
Fax: 44 1963 251510  
E-mail: info@rfm.com  
http://www.rfm.com  
RP1298-2-010713  
Page 1 of 2  
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.  
423.22 MHz  
SAW Resonator  
Electrical Connections  
Equivalent LC Model  
This two-port, three-terminal SAW resonator is bidirectional. However, im-  
pedances and circuit board parasitics may not be symmetrical, requiring  
slightly different oscillator component-matching values.  
The following equivalent LC model is valid near resonance:  
2
1
L
M
C
R
o
M
M
C
C
o
Bottom View  
Pin  
Connection  
3
Pin 1  
Pin 2  
Pin 3  
1
2
3
Input or Output  
Output or Input  
Case Ground  
Temperature Characteristics  
fC = fO , TC = TO  
0
The curve shown on the right  
accounts for resonator con-  
tribution only and does not  
include LC component tem-  
0
-50  
-50  
Typical Test Circuit  
-100  
-100  
perature contributions.  
-150  
-150  
-200  
Power Test  
Electrical Test  
-200  
-80 -60 -40 -20  
0
+40 +60 +80  
+20  
To 50  
Network  
Analyzer  
Ω
From 50  
Network  
Analyzer  
Ω
2
P
1
INCIDENT  
T = TC - TO ( °C )  
Δ
Low-Loss  
Matching  
Network  
2
3
1
50  
Ω
Source at  
P
REFLECTED  
F
C
to50  
Ω
3
-
CW RF Power Dissipation =  
P
P
Typical Frequency Response  
REFLECTED  
INCIDENT  
The plot shown below is a typical frequency response for the RP series of  
two-port resonators. The plot is for RP1094.  
-10.0  
-20.0  
-30.0  
-40.0  
-50.0  
-60.0  
200.0  
100.0  
0.0  
Typical Application Circuits  
This SAW resonator can be used in oscillator or transmitter designs that  
require 180° phase shift at resonance in a two-port configuration. One-  
port resonators can be simulated, as shown, by connecting pins 1 and 2  
-100.0  
-200.0  
-300.0  
-400.0  
-500.0  
-600.0  
-700.0  
-800.0  
together. However, for most low-cost consumer products, this is only  
recommended for retrofit applications and not for new designs.  
Conventional Two-Port Design:  
Simulated One-Port Design:  
1
2
901.2  
905.2  
909.2  
913.2  
917.2  
921.2  
925.2  
929.2  
Frequency (MHz)  
Phasing  
& Match  
Phasing  
& Match  
3
Millimeters  
Inches  
Dimensions  
Case Design  
Min  
Max  
Min  
Max  
A
B
C
D
E
F
9.40  
3.18  
3.50  
0.370  
0.125  
0.138  
C
G
B
2.50  
0.098  
H
0.46 Nominal  
0.018 Nominal  
0.200 Nominal  
0.100 Nominal  
0.100 Nominal  
F
E
A
5.08 Nominal  
2.54 Nominal  
2.54 Nominal  
D
(3 places)  
G
H
J
1.02  
0.040  
J
(2 places)  
45°  
1.40  
0.055  
RF Monolithics, Inc.  
RFM Europe  
Phone: (972) 233-2903  
Phone: 44 1963 251383  
Fax: (972) 387-9148  
Fax: 44 1963 251510  
E-mail: info@rfm.com  
http://www.rfm.com  
RP1298-2-010713  
Page 2 of 2  
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.  

相关型号:

RP1298-2_15

423.22 MHz SAW Resonator
MURATA

RP1298_15

423.22 MHz SAW Resonator
MURATA

RP12C

Optoelectronic
ETC

RP13-PC-112

Plastic Push-Pull Lock Connectors
HRS

RP13-PC-122

Plastic Push-Pull Lock Connectors
HRS

RP13-PC-212

Circular Connector
HRS

RP13-PC-221

Circular Connector
HRS

RP13-PC-222

Circular Connector
HRS

RP13-PC-TP

Tool And Machinery
HRS

RP13-TC-11

Plastic Push-Pull Lock Connectors
HRS

RP13-TC-12

Plastic Push-Pull Lock Connectors
HRS

RP130

Supply Current Typ. 38uA
RICOH