PLA10AN2030R5R2 [MURATA]
300V, SINGLE PHASE EMI FILTER,;型号: | PLA10AN2030R5R2 |
厂家: | muRata |
描述: | 300V, SINGLE PHASE EMI FILTER, LTE |
文件: | 总18页 (文件大小:362K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C09E6.pdf 03.3.10
EMI Suppression Filters (EMIFILr) for AC Power Lines
Mura ta EMC Solutions : http ://www.mura ta .c o.jp /e mc /
EMI
SUPPRESSION
FILTERS (EMIFILr)
Mu ra ta
Ma nu fa cturin g Co., Ltd .
Cat.No.C09E-6
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C09E6.pdf 03.3.10
1
2
CONTENTS
EMIFILr in this catalog is the trademark of Murata Manufacturing Co., Ltd.
Part Numbering
2
3
Outline of EMI Suppression Filter (EMIFILr) for AC Power Lines
1
Common Mode Choke Coil
5
PLA10 Series Standard Winding Type
PLA10 Series Sectional Winding Type
PLA10 Series (Safety Standard Recognized) Standard Winding Type
PLA10 Series (Safety Standard Recognized) Sectional Winding Type
PLH10 Series
5
6
7
7
9
PLH10 Series (Safety Standard Recognized)
Hybrid Choke Coil
10
11
11
11
13
14
16
2
PLY10 Series Standard Winding Type
PLY10 Series Sectional Winding Type
Noise Suppression Effect of PLY10 Series
!Caution /Notice
Packaging
Recycled Paper
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C09E6.pdf 03.3.10
The structure of the "Global Part Numbers" that have been adopted since June 2001 and the meaning of each code are described herein.
If you have any questions about details, please inquire at your usual Murata sales office or distributor.
o Part Numbering
(
)
AC Line Filters
(Global Part Number)
R
2
B
PL
A
10
A
S
152 2R0
q
w
e
r
t
y
u
i
o
!
qProduct ID
yInductance
Expressed by three figures. The unit is micro-henry (µH). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures. If
Product ID
PL
Common Mode Choke Coils
there is a decimal point, it is expressed by the capital letter "R". In
this case, all figures are significant digits. If inductance is less
than 0.1 µH, the inductance code is expressed by a combination
of two figures and capital letter "N", and the unit of inductance is
nano-henry (nH). The capital letter "N" indicates the unit of "nH",
and also expresses a decimal point. In this case, all figures are
significant digits.
wType
Code
A
Type
AC Standard Type
H
AC High-frequency Type
AC Hybrid Choke Coils Type
Y
eApplications
uRated Current
Expressed by three figures. The unit is in amperes (A). A decimal
point is expressed by the capital letter "R". In this case, all figures
are significant digits.
Code
Applications
10
for AC Line
rStructure
iWinding Mode
Code
Structure
Code
D
Winding Mode
Sectional Winding Type
Standard Type
A
Core Vertical Type
R
tFeatures
P
Aligned Winding Type
Code
S
Features
Safety Recognized
General Use
oLead Dimensions
N
Code
Lead Dimensions
2
3.5mm
!Packaging
Code
B
Packaging
Bulk
Series
All series
M
Magazine Package
2
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C09E6.pdf 03.3.10
Outline of EMI Suppression Filter (EMIFILr) for AC Power Lines
EMI (Electro Magnetic Interference) suppression filter for AC
power lines eliminate noise entering equipment from
commercial power lines or noise generated from electronic
equipment.
performance of total filter block MURATA provides two types
of common mode chokes. (Standard type, High-frequency
type)
Hybrid choke coil is high performance EMI suppression
device which can suppress both common mode noise and
differential mode noise at the same time. It is effective in AC
power supplies with active device for higher harmonic
countermeasure, which tend to emit relatively higher
differential mode noise.
Common mode chokes, line bypass capacitors, across the
line capacitors are generally used as AC EMI suppression
filter device. In suppressing common mode noise, common
mode chokes are most important devices. Because the
characteristics of common mode chokes influences
■ Classification of EMI Suppression Filter for AC Power Lines
Effective Frequency Range (Hz)
Product Name
Appearance
Application
10k 100k 1M 10M 100M 1G
Common Mode Choke Coil
Standard Type
Suppression of general
common mode noise
PLA10
High Frequency Type
Suppression of common mode
noise contains high-frequency
noise above 10MHz
PLH10
Hybrid Choke Coil
Suppression of conduction
noise in AC power line with
active device for higher
harmonic countermeasure.
Suppression of AC power line
noise which contains both
common mode noise and
differential mode noise.
PLY10
3
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C09E6.pdf 03.3.10
Outline of EMI Suppression Filter (EMIFILr) for AC Power Lines
■ Common Mode Choke Coil Standard Winding and Sectional Winding
Standard Winding
End of Winding
Standard Winding
36 35 34 33 32 31 30 29 28
Large inductance is available
→Highly Efficient in Low Frequency
19 20 21 22 23 24 25 26 27
18 17 16 15 14 13 12 11 10
1
2 3 4 5 6 7 8 9
Sectional Winding
Excellent performance in high frequency
Beginning of Winding
Stray capacity between windings is low
High-frequency noise can pass through the
Filter easily because both edges of coils are
close as shown above
0
20
40
Sectional Winding
End of Winding
(Standard Winding)
16 15 14 13 32 31 30 29
9
8
1
10 11 12 25 26 27 28
7
2
6
3
5
4
24 23 22 21
17 18 19 20
(Sectional Winding)
60
80
Beginning of Winding
High-frequency noise can hardly pass
through the Filter because both edges
of coil are not close as shown above
0.01
0.1
1
10
100
Frequency (MHz)
■ Noise Measures for Switching Power Supply
Common Mode Choke Coil
suppresses Common
Mode Noise
Line Bypass Capacitor
(Y Capacitor) suppresses
Common Mode Noise
Differential Mode Choke Coil
suppresses Differential Mode Noise
Common Mode Noise
Differential Mode Noise
Noise are generated from
Switching Power Supply
Switching
Load
Power Supply
PLA10/PLH10
Across the Line Capacitor
(X Capacitor) suppresses
Differential Mode Noise
Differential Mode Choke Coil
suppresses Differential Mode
Noise
Across the Line Capacitor
(X Capacitor) suppresses
Differential Mode Noise
4
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C09E6.pdf 03.3.10
1
EMI Suppression Filters (EMIFILr) for AC Power Lines
Common Mode Choke Coil
16 max.
18 max.
The PLA10 series is a compact size AC common mode
choke coil. It can obtain a high inductance value in
spite of its compact size.
■ Features
1. Compact and light weight
2. Low profile in vertical core layout
ø0.9 max.
3. Both a standard winding type and a sectional
13±0.5
10±0.5
(1)
(4)
(4)
[(1)]
(3)
winding type for higher frequency noise are
available.
Standard Winding Type
[(2)]
[(3)]
[(2)]
(in mm)
18 max.
16 max.
ø0.9 max.
13±0.5
10±0.5
(1)
(4)
(4)
(3)
Sectional Winding Type
[(2)]
[(3)]
[(1)]
[(2)]
(in mm)
PLA10 Series Standard Winding Type
Common Mode Inductance
Rated Current
(A)
Rated Voltage
(V)
Insulation Resistance
(M ohm)
Part Number
(mH)
PLA10AN1522R0R2
PLA10AN1821R7R2
PLA10AN2221R5R2
PLA10AN3021R3R2
PLA10AN3521R2R2
PLA10AN5521R0R2
PLA10AN7420R8R2
PLA10AN1030R7R2
PLA10AN1230R6R2
PLA10AN2030R5R2
PLA10AN3030R4R2
PLA10AN4330R3R2
1.5 min.
1.8 min.
2.2 min.
3.0 min.
3.5 min.
5.5 min.
7.4 min.
10.0 min.
12.0 min.
20.0 min.
30.0 min.
43.0 min.
2.0
1.7
1.5
1.3
1.2
1.0
0.8
0.7
0.6
0.5
0.4
0.3
300
300
300
300
300
300
300
300
300
300
300
300
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise) : -25°C to 120°C
Winding Temperature Rise (at Rated Current) : 60K max.
5
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C09E6.pdf 03.3.10
1
PLA10 Series Sectional Winding Type
Common Mode Inductance
Rated Current
(A)
Rated Voltage
(V)
Insulation Resistance
(M ohm)
Part Number
(mH)
PLA10AN9012R0D2
PLA10AN1321R7D2
PLA10AN1821R5D2
PLA10AN2021R3D2
PLA10AN3621R0D2
PLA10AN7720R7D2
PLA10AN1330R5D2
PLA10AN2230R4D2
PLA10AN3630R3D2
0.9 min.
1.3 min.
1.8 min.
2.0 min.
3.6 min.
7.7 min.
13.0 min.
22.0 min.
36.0 min.
2.0
1.7
1.5
1.3
1.0
0.7
0.5
0.4
0.3
300
300
300
300
300
300
300
300
300
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise) : -25°C to 120°C
Winding Temperature Rise (at Rated Current) : 60K max.
■ Equivalent Circuit Diagram
(1)
(4)
(2)
N1
N2
N1 : N2 = 1 : 1
(3)
■ Insertion Loss Characteristics (Typical)
Standard Winding Type
Sectional Winding Type
0
20
40
0
PLA10AN1522R0R2
PLA10AN1821R7R2
PLA10AN2221R5R2
PLA10AN3021R3R2
PLA10AN9012R0D2
PLA10AN1321R7D2
PLA10AN1821R5D2
PLA10AN2021R3D2
PLA10AN3521R2R2
20
PLA10AN5521R0R2
40
PLA10AN7420R8R2
PLA10AN1030R7R2
PLA10AN1230R6R2
PLA10AN2030R5R2
PLA10AN3030R4R2
PLA10AN4330R3R2
PLA10AN3621R0D2
PLA10AN7720R7D2
PLA10AN1330R5D2
PLA10AN2230R4D2
PLA10AN3630R3D2
60
80
60
80
0.01
0.1
1
10
100
0.01
0.1
1
10
100
Frequency (MHz)
Frequency (MHz)
6
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C09E6.pdf 03.3.10
16 max.
18 max.
■ Features
1. Compact and light weight
1
2. Low profile in vertical core layout
3. Both a standard winding type and a sectional winding
type for higher frequency noise are available.
4. Safety standards : EN60065
ø0.9 max.
■ Applications
13±0.5
10±0.5
(1)
(4)
(4)
[(1)]
(3)
Switching power supply, electric ballast
Standard Winding Type
[(2)]
[(3)]
[(2)]
(AC-AC converter)
(in mm)
18 max.
16 max.
ø0.9 max.
13±0.5
10±0.5
(1)
(4)
(4)
(3)
Sectional Winding Type
[(2)]
[(3)]
[(1)]
[(2)]
(in mm)
PLA10 Series (Safety Standard Recognized) Standard Winding Type
Common Mode Inductance
(mH)
Rated Current
(A)
Rated Voltage
(V)
Insulation Resistance
(M ohm)
Part Number
PLA10AS1522R0R2
PLA10AS1821R7R2
PLA10AS2221R5R2
PLA10AS3021R3R2
PLA10AS3521R2R2
PLA10AS5521R0R2
PLA10AS7420R8R2
PLA10AS1030R7R2
PLA10AS1230R6R2
PLA10AS2030R5R2
PLA10AS3030R4R2
PLA10AS4330R3R2
1.5 min.
1.8 min.
2.2 min.
3.0 min.
3.5 min.
5.5 min.
7.4 min.
10.0 min.
12.0 min.
20.0 min.
30.0 min.
43.0 min.
2.0
1.7
1.5
1.3
1.2
1.0
0.8
0.7
0.6
0.5
0.4
0.3
250
250
250
250
250
250
250
250
250
250
250
250
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
Operating Temperature Range : -25°C to 60°C
Winding Temperature Rise (at Rated Current) : 60K max.
PLA10 Series (Safety Standard Recognized) Sectional Winding Type
Common Mode Inductance
(mH)
Rated Current
(A)
Rated Voltage
(V)
Insulation Resistance
(M ohm)
Part Number
PLA10AS9012R0D2
PLA10AS1321R7D2
PLA10AS1821R5D2
PLA10AS2021R3D2
PLA10AS3621R0D2
PLA10AS7720R7D2
PLA10AS1330R5D2
PLA10AS2230R4D2
PLA10AS3630R3D2
0.9 min.
1.3 min.
1.8 min.
2.0 min.
3.6 min.
7.7 min.
13.0 min.
22.0 min.
36.0 min.
2.0
1.7
1.5
1.3
1.0
0.7
0.5
0.4
0.3
250
250
250
250
250
250
250
250
250
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
Operating Temperature Range : -25°C to 60°C
Winding Temperature Rise (at Rated Current) : 60K max.
7
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C09E6.pdf 03.3.10
■ Equivalent Circuit Diagram
1
(1)
(2)
N1
N1 : N2 = 1 : 1
N2
(4)
(3)
■ Insertion Loss Characteristics (Typical)
Standard Winding Type
Sectional Winding Type
0
20
40
0
PLA10AS9012R0D2
PLA10AS1321R7D2
PLA10AS1821R5D2
PLA10AS2021R3D2
PLA10AS3621R0D2
PLA10AS7720R7D2
PLA10AS1522R0R2
PLA10AS1821R7R2
PLA10AS2221R5R2
PLA10AS3021R3R2
PLA10AS3521R2R2
PLA10AS5521R0R2
20
40
PLA10AS7420R8R2
PLA10AS1030R7R2
PLA10AS1230R6R2
PLA10AS2030R5R2
PLA10AS3030R4R2
PLA10AS4330R3R2
60
80
60
80
PLA10AS1330R5D2
PLA10AS2230R4D2
PLA10AS3630R3D2
0.01
0.1
1
10
100
0.01
0.1
1
10
100
Frequency (MHz)
Frequency (MHz)
8
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C09E6.pdf 03.3.10
1
PLH10 Series
16 max.
18 max.
The PLH10 series is a common mode choke coil for high
frequency use. The same dimensions as the PLA10 series
enables flexible design.
■ Features
1. High performance in high frequency range
2. Low profile in vertical core layout
3. Compact and light weight
ø0.9 max.
10±0.5
13±0.5
(1)
(4)
(4)
(3)
[(2)]
[(3)]
[(1)]
[(2)]
(in mm)
Common Mode Inductance
Rated Current
Rated Voltage
(V)
Insulation Resistance
(M ohm)
Part Number
(µH)
(A)
PLH10AN7003R6P2
PLH10AN1112R6P2
PLH10AN1612R1P2
PLH10AN2211R5P2
PLH10AN2911R2P2
PLH10AN3711R0P2
70 min.
110 min.
160 min.
220 min.
290 min.
370 min.
3.6
2.6
2.1
1.5
1.2
1.0
300
300
300
300
300
300
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise) : -25°C to 120°C
Winding Temperature Rise (at Rated Current) : 60K max.
■ Equivalent Circuit Diagram
■ Insertion Loss Characteristics (Typical)
0
PLH10AN7003R6P2
10
20
PLH10AN1112R6P2
PLH10AN1612R1P2
(1)
(2)
N1
N1 : N2 = 1 : 1
30
40
50
PLH10AN2211R5P2
PLH10AN2911R2P2
PLH10AN3711R0P2
N2
(4)
(3)
0.1
1.0
10
Frequency (MHz)
100
1000
9
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C09E6.pdf 03.3.10
1
PLH10 Series (Safety Standard Recognized)
16 max.
18 max.
■ Features
1. High performance in high frequency range
2. Low profile in vertical core layout
3. Compact and light weight
4. Safety standards : EN60065
■ Applications
ø0.9 max.
10±0.5
13±0.5
Suppressing radiation noise in switching power supply
(1)
(4)
(4)
(3)
and inverter (AC-AC converter)
[(2)]
[(3)]
[(1)]
[(2)]
(in mm)
Common Mode Inductance
Rated Current
Rated Voltage
(V)
Insulation Resistance
(M ohm)
Part Number
(µH)
(A)
PLH10AS7003R6P2
PLH10AS1112R6P2
PLH10AS1612R1P2
PLH10AS2211R5P2
PLH10AS2911R2P2
PLH10AS3711R0P2
70 min.
110 min.
160 min.
220 min.
290 min.
370 min.
3.6
2.6
2.1
1.5
1.2
1.0
250
250
250
250
250
250
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
Operating Temperature Range : -25°C to 60°C
Winding Temperature Rise (at Rated Current) : 60K max.
■ Equivalent Circuit Diagram
■ Insertion Loss Characteristics (Typical)
0
PLH10AS7003R6P2
10
20
PLH10AS1112R6P2
PLH10AS1612R1P2
(1)
(2)
N1
N1 : N2 = 1 : 1
30
40
50
PLH10AS2211R5P2
PLH10AS2911R2P2
PLH10AS3711R0P2
N2
(4)
(3)
0.1
1.0
10
Frequency (MHz)
100
1000
10
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C09E6.pdf 03.3.10
EMI Suppression Filters (EMIFILr) for AC Power Lines
Hybrid Choke Coil
16 max.
18 max.
The PLY10 is a compact and high performance hybrid
choke coil which can handle differential mode noise
caused by the harmonics currents regulation circuit as
well as common mode noise. It can handle noise
problems much more compactly than a combination of a
conventional common mode choke coil and differential
mode choke coil.
2
ø0.9 max.
13±0.5
10±0.5
(1)
(4)
(4)
(3)
■ Features
Standard Winding Type
[(2)]
[(3)]
[(1)]
[(2)]
1. PLY10 has both functions of a common mode choke
(in mm)
coil and a differential mode choke coil in its
compact body.
2. Low profile in vertical core layout
3. PLY10 has the same pin layout as a general type
common mode choke coil which enables it to replace
conventional components.
16 max.
18 max.
■ EMI Problem for harmonics currents regulation
There are some methods meet harmonics currents
regulations (IEC1000-3, EN60555-2) such as active
ø0.9 max.
filter type and one converter type. However, they
13±0.5
10±0.5
(1)
(4)
(4)
(3)
cause new EMI problems of differential mode noise
because they use active components. For that reason,
additional filter components to meet differential mode
noise must be applied.
Sectional Winding Type
[(2)]
[(3)]
[(1)]
[(2)]
(in mm)
PLY10 Series Standard Winding Type
Common Mode Inductance
Normal Mode Inductance
Rated Current
(A)
Rated Voltage
(Vac)
Part Number
(mH)
(mH)
PLY10AN1430R5R2
PLY10AN9920R6R2
PLY10AN8720R7R2
PLY10AN6220R8R2
PLY10AN4321R0R2
PLY10AN2821R2R2
PLY10AN2121R4R2
PLY10AN1521R6R2
PLY10AN1121R8R2
PLY10AN9012R0R2
14.0 min.
9.9 min.
8.7 min.
6.2 min.
4.3 min.
2.8 min.
2.1 min.
1.5 min.
1.1 min.
0.9 min.
1.0 min.
0.69 min.
0.53 min.
0.40 min.
0.30 min.
0.19 min.
0.15 min.
0.11 min.
0.09 min.
0.065 min.
0.5
0.6
0.7
0.8
1.0
1.2
1.4
1.6
1.8
2.0
300
300
300
300
300
300
300
300
300
300
Operating Temperature (Ambient Temperature Range + Winding Temperature Rise) : -25°C to 120°C
Winding Temperature Rise (at Rated Current) : 60K max.
PLY10 Series Sectional Winding Type
Common Mode Inductance
(mH)
Normal Mode Inductance
Rated Current
(A)
Rated Voltage
Part Number
(mH)
(Vac)
PLY10AN1130R5D2
PLY10AN9720R6D2
PLY10AN8720R7D2
PLY10AN4420R8D2
PLY10AN3521R0D2
11.0 min.
9.7 min.
8.7 min.
4.4 min.
3.5 min.
0.84 min.
0.67 min.
0.50 min.
0.32 min.
0.24 min.
0.5
0.6
0.7
0.8
1.0
300
300
300
300
300
Continued on the following page.
11
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C09E6.pdf 03.3.10
Continued from the preceding page.
Common Mode Inductance
Normal Mode Inductance
(mH)
Rated Current
(A)
Rated Voltage
(Vac)
Part Number
(mH)
PLY10AN2321R2D2
PLY10AN1421R4D2
PLY10AN1121R7D2
PLY10AN7012R0D2
2.3 min.
1.4 min.
1.1 min.
0.7 min.
0.16 min.
0.11 min.
0.065 min.
0.050 min.
1.2
1.4
1.7
2.0
300
300
300
300
Operating Temperature (Ambient Temperature Range + Winding Temperature Rise) : -25°C to 120°C
Winding Temperature Rise (at Rated Current) : 60K max.
2
■ Equivalent Circuit Diagram
Differential Mode Inductor
(1)
(2)
(4)
(3)
Common Mode Inductor
■ Common Mode Insertion Loss Characteristics (Typical)
Standard Winding Type
Sectional Winding Type
0
0
PLY10AN9012R0R2
PLY10AN1121R8R2
PLY10AN1521R6R2
PLY10AN7012R0D2
PLY10AN1121R7D2
PLY10AN1421R4D2
PLY10AN2321R2D2
PLY10AN3521R0D2
PLY10AN2121R4R2
20
40
20
40
PLY10AN2821R2R2
PLY10AN4321R0R2
PLY10AN6220R8R2
PLY10AN8720R7R2
PLY10AN9920R6R2
PLY10AN1430R5R2
60
80
PLY10AN4420R8D2
60
PLY10AN8720R7D2
PLY10AN9720R6D2
PLY10AN1130R5D2
80
0.01
0.01
0.1
1
10
100
0.1
1
10
100
Frequency (MHz)
Frequency (MHz)
■ Differential Mode Insertion Loss Characteristics (Typical)
Standard Winding Type
Sectional Winding Type
0
0
20
40
PLY10AN9012R0R2
PLY10AN1121R8R2
PLY10AN1521R6R2
PLY10AN7012R0D2
PLY10AN1121R7D2
PLY10AN1421R4D2
20
PLY10AN2321R2D2
40
PLY10AN3521R0D2
PLY10AN4420R8D2
PLY10AN8720R7D2
PLY10AN9720R6D2
PLY10AN1130R5D2
PLY10AN2121R4R2
PLY10AN2821R2R2
PLY10AN4321R0R2
PLY10AN6220R8R2
60
60
80
PLY10AN8720R7R2
PLY10AN9920R6R2
PLY10AN1430R5R2
80
0.01
0.1
1
10
100
0.01
0.1
1
10
100
Frequency (MHz)
Frequency (MHz)
12
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C09E6.pdf 03.3.10
Noise Suppression Effect of PLY10 Series
The data shows noise suppression effects comparison PLY10 with existing common mode choke coil. (In AC adaptor of note PC)
2
Common mode choke coil and differentical mode choke coil are used.
0.33µF 0.1µF
Hybrid choke coil PLY10
0.1µF
0.33µF
24mH
680µH
1000pF
1000pF
PLY10A1130R5D
• Noise Level
The filter circuit with hybrid choke coil has suppressed conducted noise as well as conventional filter in spite of its compact
composition.
Common mode choke coil and differencial mode choke coil are used.
90
Hybrid choke coil PLY10
90
80
70
60
50
40
80
70
60
50
40
30
20
30
20
0.5
1
5
10
30
0.5
1
5
10
30
Frequency (MHz)
Frequency (MHz)
13
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C09E6.pdf 03.3.10
!Caution /Notice
■ !Caution (Rating)
1. Rated Current
in accordance with each safety standard applicable
to final assembeld product.
Operating current should not exceed the rated value.
Even if operating current is under the rated value,
adequate ventilation is required to avoid excessive
heat generated within the product (choke coil) and
from surrounding heat sources.
When the temperature at winding exceeds maximum
allowable temperature of safety standard, the rated
current should be derated.
2
2. Inrush Current
If exceeding these conditions, excessive heat may
cause fumes or permanent damage to the product.
Please ensure that product (choke coil) is evaluated
and confirmed against the specification when it is
mounted in your final assembled product. -> Winding
temperature should be less than 120 degree C.
Maximum allowable temperature at the surface of coil
(ambient temperature + winding temperature rise) is
Inrush current should not exceed 10 times rated
current within 1/4 cycle of 50/60Hz commercial
power line. Inrush current should be limited to a
minimum of 10 seconds after last inrush.
If these conditions are exceeded, excessive heat
may cause fumes or permanent damage to the
component, or at worst cause ignition.
■ Notice (Storage and Operating Condition)
1. Soldering Conditions
(1) Storage period
(1) Flux, solder
Product should be used within 12 months after
receiving.
Rosin-based flux should be used.
Do not use strong acidic flux with halide
content exceeding 0.2%wt
Solderability should be checked if this period
is exceeded.
(chlorine conversion value)
(2) Storage conditions
Use 63/37 solder (Sn 63%/Pb 37%) or 60/40
solder (Sn 60%/Pb 40%)
Storage temperature : -10 to 40 degree C
Relative humidity : 30 to 70%
(2) Flow soldering
Avoid sudden changes in temperature and humidity.
Don't keep products in corrosive gases such as
sulfur, chlorine gas or acid, or it may cause
oxidation of lead terminals resulting in poor
solderability or corrosion of component windings.
(3) Handling conditions
Products should be soldered by flow method
under the following conditions:
Soldering Temp. : 240 to 260 degree C
Soldering Time : Less than 5 s
2. Cleaning
Avoid cleaning product due to non-waterproof
construction.
Care should be taken when transporting or
handling product to avoid excessive vibration or
mechanical shock.
3. Storage and handling requirements
■ Notice (Soldering and Mounting)
Magnetic Flux Leakage
Choke coils generate small amounts of magnetic flux
leakage that may adversely affect equipment operation
according to component arrangement.
Testing should be completed on final assembly to
ensure equipment performance is not affected.
14
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C09E6.pdf 03.3.10
!Caution /Notice
■ Notice (Rating)
Coil Humming Noise
Magnetic flux generated between coil and core or
between the choke coil windings creates repulsive
power between the coil windings. This repulsive
power causes the coil winding to vibrate and create
a humming noise. The amount of hum produced by the
coil is proportionate to the amount of harmonic
distortion generated by the operating current. This
does not influence the electrical performance of
the coils, but it should be considered and tested
in actual circuit application.
2
15
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C09E6.pdf 03.3.10
Packaging
■ Minimum Quantity
Minimum Quantity (pcs.)
Part Number
Magazine Package
30
Box
210
210
200
PLA10
PLH10
PLY10
30
30
2
16
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C09E6.pdf 03.3.10
Note:
1. Export Control
For customers outside Japan
<
>
Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive
weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons.
For customers in Japan
<
>
For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required
for export.
2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially
high reliability for the prevention of defects which might directly damage to a third party's life, body or property, or when one of our products is intended for use
in applications other than those specified in this catalog.
q Aircraft equipment
w Aerospace equipment
e Undersea equipment
t Medical equipment
u Traffic signal equipment
o Data-processing equipment
r Power plant equipment
y Transportation equipment (vehicles, trains, ships, etc.)
i Disaster prevention / crime prevention equipment
! Application of similar complexity and/or reliability requirements to the applications listed in the above
3. Product specifications in this catalog are as of January 2003. They are subject to change or our products in it may be discontinued without advance notice.
Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or
product engineers.
4. Please read rating and
CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or
transact the approval sheet for product specifications before ordering.
6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect
of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or
contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned
above under licenses without our consent.
7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.
http://www.murata.com/
He a d O ffice
In te rn a tio n a l Divisio n
2-26-10, Tenjin Nagaokakyo-shi, Kyoto 617-8555, Japan Phone: 81-75-951-9111
3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan
Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: intl@murata.co.jp
相关型号:
©2020 ICPDF网 联系我们和版权申明