首页 |元器件品牌

PKM22EPTH2001-B0 [MURATA]

EMIFIL (Capacitor type) Single Circuit Type for Signal Lines; EMIFIL （电容式），单电路类型的信号线
PKM22EPTH2001-B0
型号： PKM22EPTH2001-B0
厂家： muRata    muRata
描述：

EMIFIL (Capacitor type) Single Circuit Type for Signal Lines
EMIFIL （电容式），单电路类型的信号线
文件： 总35页 (文件大小：1054K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
Piezoelectric Sound  
Components  
Cat.No.P37E-24  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
EU RoHS Compliant  
s
All the products in this catalog comply with EU RoHS.  
s
EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use  
of Certain Hazardous Substances in Electrical and Electronic Equipment."  
For more details, please refer to our website 'Murata's Approach for EU RoHS'  
s
(http://www.murata.com/info/rohs.html).  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
1
CONTENTS  
PIEZORINGERr and "PIEZORINGER" in this catalog are  
the trademarks of Murata Manufacturing Co., Ltd.  
Part Numbering  
2
4
Application Matrix  
2
3
4
5
6
7
8
1
Piezoelectric Diaphragms  
5
External Drive Type  
5
Self Drive Type  
6
Piezoelectric Diaphragms Notice  
7
2
3
4
5
6
Piezoelectric Sounders External Drive Pin Type  
Piezoelectric Sounders (External Drive Pin Type) Circuit/Notice  
Piezoelectric Sounders External Drive Pin Type Taping  
Piezoelectric Sounders (External Drive Pin Type Taping) Circuit/Notice  
Piezoelectric Sounders External Drive Lead Wire Type  
Piezoelectric Sounders (External Drive Lead Wire Type) Circuit/Notice  
Piezoelectric Sounders External Drive SMD Type  
Piezoelectric Sounders (External Drive SMD Type) Circuit/Notice  
Piezoelectric Ringers (PIEZORINGERr)  
Pin Type  
8
13  
14  
16  
17  
19  
20  
22  
23  
23  
23  
25  
26  
27  
28  
29  
30  
31  
Lead Wire Type  
Piezoelectric Ringers (PIEZORINGERr) Notice  
Piezoelectric Sounders Self Drive Pin Type  
Piezoelectric Sounders (Self Drive) Notice  
Piezoelectric Buzzers Pin Type  
7
8
Piezoelectric Buzzers Notice  
Piezoelectric Sound Components Notice  
Package  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
o Part Numbering  
Piezoelectric Diaphragms  
(Part Number)  
L
10  
7
N
B
-31R2 DM -1R5  
q
w
e
r
t
y
u
i
o
qProduct ID  
yResonant Frequency Type  
Product ID  
Code  
Resonant Frequency (kHz)  
7
Ceramic Material  
A hyphen (-) and three-digit alphanumerics  
express resonant frequency. A decimal point is  
expressed by the capital letter "R."  
-1R5  
wMaterial  
If there is no decimal point, the decimal point code is omitted.  
Code  
Metal Plate Material  
Brass  
B
N
S
uWith Feedback Electrode  
Nickel Alloy  
SUS  
Code  
C
With Feedback Electrode  
With Feedback Electrode  
Without Feedback Electrode  
eProduct  
e
Code  
Product  
iProduct Specification  
B
Piezoelectric Diaphragms  
Product Specification  
With lead (available for RoHS)  
No lead (omitted)  
Code  
L
rMetal Plate Diameter  
Code  
Metal Plate Diameter  
e
A hyphen (-) plus four-digit alphanumerics  
express metal plate outer dimensions. A  
decimal point is expressed by the capital letter  
oIndividual Specification Code  
-31R2  
Individual Specification Code  
Code  
"R."  
If there is no decimal point, the decimal point code is omitted.  
These digits express a lead length, lead  
number, and the presence/absence of a  
connector.  
10  
tForm of Piezoelectric Style  
If the product has no individual specification, the corresponding code is  
omitted.  
Code  
Form of Piezoelectric Style  
DM  
Two digits express the shape of ceramics.  
For an Ag electrode, this digit remains blank; the corresponding code is  
omitted.  
2
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
Piezoelectric Sounders/Piezoelectric Buzzers/Piezoelectric Ringers (PIEZORINGERr)  
(Part Number)  
P
-A0  
PK  
M
13  
E
P
YH 40 00  
q
w
e
r
t
y
u
i
o
!
qProduct ID  
uOscillating Frequency Type  
Product ID  
Oscillating Frequency Type  
Code  
PK  
Piezoelectric Sound Components  
Expressed resonant frequency by two-digit  
alphanumerics. The unit is in 100 hertz (Hz).  
In case of 4kHz (4000Hz), expressed as "40."  
40  
wProduct  
Code  
M
Product  
Sounder, Ringer  
Buzzer  
iIndividual Specification Code  
B
Individual Specification Code  
Code  
Two digits express custom specification in  
characteristics.  
00  
eOuter Dimensions  
Expressed by two figures in mm.  
oSpecial Quality Guarantee  
Ex.)  
Code  
Outer Dimensions  
13  
ø12.6mm  
Code  
P
Special Quality Guarantee  
Post Plated Terminal  
Blank  
rDrive  
Y
Code  
Drive  
!Packaging  
E
S
External-Drive  
Self-Drive  
Code  
-B0  
Packaging  
Bulk  
tOuter Electrode Style  
-A0  
Radial Taping  
Code  
P
Outer Electrode Style  
Pin Type  
Radial taping is not available for all types.  
Please contact us.  
W
Lead Wire Type  
yStructure  
Code  
Tp  
Pp  
Yp  
Cp  
p
Structure  
Standing Type  
Flat Type Auto-assemble  
Flat Type/Available for Taping  
Flat Type/Semi-auto-assemble  
Exclude above mentioned  
p signifies specification of the outer electrode.  
SMD Piezoelectric Sounder  
(Part Number)  
PK LCS 1212  
E
40 01  
-R1  
q
w
e
r
t
y
u
qProduct ID  
tOscillating Frequency Type  
Product ID  
Code  
Oscillating Frequency Type  
PK  
Piezoelectric Sound Components  
Expressed resonant frequency by two-digit  
alphanumerics. The unit is in 100 hertz (Hz.)  
4kHz (4000Hz) is denoted as "40."  
40  
wProduct  
Code  
Product  
yIndividual Specification Code  
LCS  
SMD Sounder  
Code  
Individual Specification Code  
eDimensions  
Two digits express specific specification  
in characteristics.  
01  
Code  
Outer Dimensions  
1212  
p12mm  
uPackaging  
rDrive  
Code  
Packaging  
Code  
Drive  
-R1  
Plastic taping  
E
External Drive  
3
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
Application Matrix  
Medical Fire/  
Phone Watch Clock Equip- Gas  
ment Alarm  
Bar  
Note-  
Micro-  
wave  
Oven  
Application  
Part Number  
Digital  
Camera  
DVD-  
Player  
Fan  
Heater  
Toy  
Code Printer PC  
Scanner  
A/C  
Cluster  
PDA  
7BB-12-9  
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
7BB-15-6  
7BB-20-3  
o
o
o
o
7BB-20-6  
o
o
o
7BB-20-6L0  
7BB-27-4  
o
o
o
o
o
o
o
o
o
o
7BB-27-4L0  
7BB-35-3  
7BB-35-3L0  
o
o
7BB-41-2  
7BB-41-2L0  
7NB-31R2-1  
o
7BB-20-6C  
o
o
o
o
o
o
o
o
o
o
o
o
o
o
7BB-20-6CL0  
7BB-27-4C  
o
o
o
o
o
o
o
o
7BB-27-4CL0  
7BB-35-3C  
7BB-35-3CL0  
7BB-41-2C  
7BB-41-2CL0  
7SB-34R7-3C  
o
PKM13EPYH4000-A0  
PKM13EPYH4002-B0  
PKM17EPP-2002-B0  
PKM17EPPH4001-B0  
PKM17EWH2001  
PKM17EWH4000  
PKM22EPH2001  
PKM22EPPH2001-B0  
PKM22EPPH4001-B0  
PKM22EPPH4005-B0  
PKM22EPPH4007-B0  
PKM22EPTH2001-B0  
PKLCS1212E2400-R1  
PKLCS1212E24A0-R1  
PKLCS1212E4001-R1  
PKLCS1212E40A1-R1  
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
PKM24SPH3805  
o
o
o
o
o
o
o
o
o
o
Piezoelectric  
Buzzer  
PKB24SPCH3601-B0  
o
o
o
o
PKM33EPH1201C  
PKM34EWH1101C  
PKM34EWH1201C  
PKM44EWH1001C  
o
o
o
o
Piezoelectric  
Ringer  
There are various applications besides those listed in the above table, including:  
Alarm, Laundry Machine, Bath, Intercom, Chime, Back Buzzer, ME Instruments, Measuring Instruments, Vending Machine, Calculator, Automobile,  
Communication Radio, Hemadynamometer, Thermometer, Facsimile, Audio Timer, Automatic Controlling Devices.  
4
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
1
Piezoelectric Sound Components  
Piezoelectric Diaphragms  
Features  
c
1. Clear sound  
2. Ultra thin and lightweight  
3. No contacts; therefore, noiseless and highly reliable  
4. Low power consumption for voltage type  
Red  
øD øa øb  
Black  
Applications  
c
Clocks/Calculators/Digital camera/Various alarms  
t
(Burglar alarms, etc.)  
T
External Drive Type  
Resonant  
Part Number Frequency Impedance  
(kHz) (ohm)  
Resonant  
Plate Size Element Size Electrode Size Thickness Plate Thickness  
Capacitance  
(nF)  
dia. D  
(mm)  
dia. a  
(mm)  
dia. b  
(mm)  
T
t
Plate Material  
Brass  
(mm)  
(mm)  
8.0 30ꢁ  
[1kꢀH]  
7BB-12-9  
7BB-15-6  
7BB-20-3  
7BB-20-6  
9.0 1.0kꢀH 1000 max.  
6.0 1.0kꢀH 800 max.  
3.6 0.6kꢀH 500 max.  
6.3 0.6kꢀH 350 max.  
12.0  
15.0  
20.0  
20.0  
20.0  
27.0  
27.0  
35.0  
35.0  
41.0  
41.0  
31.2  
9.0  
8.0  
0.22  
0.22  
0.22  
0.42  
0.42  
0.54  
0.54  
0.53  
0.53  
0.63  
0.63  
0.22  
0.10  
0.10  
0.10  
0.20  
0.20  
0.30  
0.30  
0.30  
0.30  
0.40  
0.40  
0.10  
10.0 30ꢁ  
[1kꢀH]  
10.0  
14.0  
14.0  
14.0  
19.7  
19.7  
25.0  
25.0  
25.0  
25.0  
19.7  
9.0  
Brass  
20.0 30ꢁ  
[1kꢀH]  
12.8  
12.8  
12.8  
18.2  
18.2  
23.0  
23.0  
23.0  
23.0  
18.2  
Brass  
10.0 30ꢁ  
[1kꢀH]  
Brass  
Brass  
10.0 30ꢁ  
[1kꢀH]  
7BB-20-6L0 6.3 0.6kꢀH 1000 max.  
(with Lead Wire:  
AWG32 Length 50mm)  
20.0 30ꢁ  
[1kꢀH]  
7BB-27-4  
4.6 0.5kꢀH 200 max.  
Brass  
Brass  
20.0 30ꢁ  
[1kꢀH]  
7BB-27-4L0 4.6 0.5kꢀH 300 max.  
(with Lead Wire:  
AWG32 Length 50mm)  
30.0 30ꢁ  
[1kꢀH]  
7BB-35-3  
2.8 0.5kꢀH 200 max.  
Brass  
Brass  
30.0 30ꢁ  
[1kꢀH]  
7BB-35-3L0 2.8 0.5kꢀH 200 max.  
(with Lead Wire:  
AWG32 Length 50mm)  
30.0 30ꢁ  
[1kꢀH]  
7BB-41-2  
2.2 0.3kꢀH 250 max.  
Brass  
Brass  
30.0 30ꢁ  
[1kꢀH]  
7BB-41-2L0 2.2 0.3kꢀH 300 max.  
7NB-31R2-1 1.3 0.5kꢀH 300 max.  
(with Lead Wire:  
AWG32 Length 50mm)  
40.0 30ꢁ  
[120ꢀH]  
Nickel Alloy  
5
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoꢀing and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2±12  
1
Red  
øD øa øb  
Black  
Blue  
t
T
Self Drive Type  
Resonant Resonant  
Part Number Frequency Impedance  
(kHz) (ohm)  
Plate Size Element Size Electrode Size Thickness Plate Thickness  
Capacitance  
(nF)  
dia. D  
(mm)  
dia. a  
(mm)  
dia. b  
(mm)  
T
t
Plate Material  
(mm)  
(mm)  
8.5 ±3±0  
[1ꢀkH]  
7BB-20-6C  
6.3 ±±.6ꢀkH 5±± max.  
2±.±  
2±.±  
27.±  
27.±  
35.±  
35.±  
41.±  
41.±  
34.7  
14.±  
14.±  
19.7  
19.7  
25.±  
25.±  
25.±  
25.±  
25.±  
12.8  
12.8  
18.2  
18.2  
23.±  
23.±  
23.±  
23.±  
23.4  
±.42  
±.42  
±.54  
±.54  
±.53  
±.53  
±.63  
±.63  
±.5±  
±.2±  
±.2±  
±.3±  
±.3±  
±.3±  
±.3±  
±.4±  
±.4±  
±.25  
Brass  
Brass  
8.5 ±3±0  
[1ꢀkH]  
7BB-20-6CL0 6.3 ±±.6ꢀkH 8±± max.  
(with Lead Wire:  
AWG32 Length 5±mm)  
18.± ±3±0  
[1ꢀkH]  
7BB-27-4C  
4.6 ±±.5ꢀkH 2±± max.  
Brass  
Brass  
18.± ±3±0  
[1ꢀkH]  
7BB-27-4CL0 4.6 ±±.5ꢀkH 35± max.  
(with Lead Wire:  
AWG32 Length 5±mm)  
26.± ±3±0  
[1ꢀkH]  
7BB-35-3C  
2.8 ±±.5ꢀkH 2±± max.  
Brass  
Brass  
26.± ±3±0  
[1ꢀkH]  
7BB-35-3CL0 2.8 ±±.5ꢀkH 2±± max.  
(with Lead Wire:  
AWG32 Length 5±mm)  
24.± ±3±0  
[1ꢀkH]  
7BB-41-2C  
2.2 ±±.3ꢀkH 25± max.  
Brass  
Brass  
24.± ±3±0  
[1ꢀkH]  
7BB-41-2CL0 2.2 ±±.3ꢀkH 35± max.  
7SB-34R7-3C 3.1 ±±.3ꢀkH 15± max.  
(with Lead Wire:  
AWG32 Length 5±mm)  
24.± ±3±0  
[1ꢀkH]  
Stainless  
Node Diameter  
Part Number  
7BB-20-6C  
c
Node Diameter (mm)  
’ꢁꢂꢀꢃ  
’ꢁꢄꢀꢃ  
’ꢅꢅꢀꢃ  
’ꢅꢆꢀꢃ  
7BB-27-4C  
7BB-35-3C  
7BB-41-2C  
s 3OUND DIAPHRAGMS WITHOUT FEEDBACK ELECTRODE ALSO HAVE THE SAME NODE DIAMETERSꢀ  
6
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoꢀing and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2±12  
Piezoelectric Diaphragms Notice  
1
Notice (Soldering and Mounting)  
c
1. Applying load on the center area of the diaphragm  
may cause cracꢀing in the ceramic element. When  
the diaphragm is supported by the edge, the load  
should be applied only around the edge.  
2. Please consult with a Murata representative if  
soldering of the component is needed.  
Notice (Handling)  
c
1. Please do not touch the component with a bare hand  
because the electrode may become corroded.  
2. The component may be damaged if mechanical stress  
exceeding specifications is applied.  
3. Take care to protect the operating circuit from surge  
voltage resulting from excessive force, falling, shock or  
temperature change.  
4. If DC voltage is applied to the component, silver migration  
may occur. Please strictly avoid subjecting the  
component to DC voltage for long periods.  
5. The resistor should be used as shown in Fig. A.  
A suitable resistance value should be chosen, preferably  
1kΩ to 2kΩ. Instead of this measure, a diode may also be  
applied as shown in Fig. B.  
R
IC  
IC  
Fig. A  
Fig. B  
6. Avoid excessive pulling of the lead wire because the wire  
may break or the soldering point come off.  
7
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
Piezoelectric Sound Components  
Piezoelectric Sounders External Drive Pin Type  
Microcomputers are widely used for microwave  
ovens, air conditioners, cars, toys, timers, and  
alarm equipment. Externally driven piezoelectric  
sounders are used in digital watches, electronic  
calculators, telephones and other equipment.  
They are driven by a signal (ex.: 2048Hz or 4096Hz)  
from an LSI and provide melodious sound.  
2
ø12.6  
2–ø0.5  
2–ø2.5  
5.0  
2–ø1.0  
Features  
c
PKM13EPYH4002-B0  
PKM17EPP-2002-B0  
PKM22EPH2001  
1. Low power consumption  
2. No contacts; therefore, noiseless and highly reliable  
(in mm)  
Tol.: 0.5  
Applications  
c
1. Various office equipment such as PPCs, printers and  
keyboards  
2. Audible feedback-response to some action or input.  
3. Confirmation sound of various audio equipment  
R1.0  
10.0  
ø17.0  
Terminal of marking  
side should be connected  
to hot side of D.C.  
2-ø1.2  
2-ø3.5  
(in mm)  
Tol.: 0.5  
12.6  
Hole Pattern  
(Reference)  
2-ø1.5  
R1.0  
23.0  
0.8  
ø22.0  
4.0  
10.0  
ø17.0  
2-ø1.2  
(in mm)  
Tol.: 0.5  
2-ø3.5  
(in mm)  
PKM17EPPH4001-B0  
Tol.: 0.5  
Part Number  
Part Number  
PKM17EPPH4001-B0  
PKM17EPPH4002-B0  
PKM22EPH2001  
PKM22EPH2002  
PKM22EPH2003  
4.0  
8.0  
12.0  
6.5  
3.5  
R1.0  
R1.0  
0.8  
0.8  
10.0  
10.0  
ø22.0  
ø22.0  
2–ø1.2  
2–ø1.2  
2–ø3.5  
2–ø3.5  
(in mm)  
(in mm)  
PKM22EPPH2001-B0  
Tol.: 0.5  
PKM22EPPH4001-B0  
Tol.: 0.5  
Part Number  
Part Number  
PKM22EPPH2001-B0  
PKM22EPPH2002-B0  
6.5  
3.5  
PKM22EPPH4001-B0  
PKM22EPPH4002-B0  
6.5  
3.5  
Continued on the following page.  
8
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
Continued from the preceding page.  
R1.0  
R1.0  
0.8  
10.0  
ø22.0  
0.8  
10.0  
2-ø1.2  
ø22.0  
ø1.2  
3–ø1.5  
3–ø1.7  
2
2-ø3.5  
(in mm)  
Tol.: 0.5  
PKM22EPPH4005-B0  
PKM22EPPH4007-B0  
2–ø3.5  
Part Number  
PKM22EPPH4007-B0  
PKM22EPPH4012-B0  
6.5  
3.5  
(in mm)  
Tol.: 0.5  
R11.0  
+0.1  
1.0  
3.5  
0.8  
–0  
12.5  
22.0  
6.0  
0.25  
3.0  
7.0  
PKM22EPTH2001-B0  
(in mm)  
Tol.: 0.5  
Sound  
Pressure Level  
(dB)  
Sound Pressure  
Level (Ref. only)  
(dB)  
Operating  
Storage  
Operating  
Voltage Range  
Capacitance  
(nF)  
Part Number  
Temp. Range Temp. Range  
(°C)  
(°C)  
70 min.  
70 min.  
5.5 30ꢀ  
[1kHz]  
PKM13EPYH4002-B0  
30.0Vp-p max.  
-40 to +85  
-40 to +85  
[3Vp-p,4kHz,square wave,10cm] [1Vrms,4kHz,sine wave,10cm]  
70 min. 70 min.  
[3Vo-p,2kHz,square wave,10cm] [1Vrms,2kHz,sine wave,10cm] [with polarity]  
25.0Vo-p max. 34.0 30ꢀ  
PKM17EPP-2002-B0  
PKM17EPPH4001-B0  
PKM22EPH2001  
-20 to +70  
-20 to +70  
-20 to +70  
-20 to +70  
-20 to +70  
-20 to +70  
-20 to +70  
-20 to +70  
-30 to +80  
-30 to +80  
-30 to +80  
-30 to +80  
-30 to +80  
-30 to +80  
-30 to +80  
-30 to +80  
[120Hz]  
72 min. 72 min.  
7.0 30ꢀ  
[1kHz]  
25.0Vp-p max.  
25.0Vp-p max.  
30.0Vp-p max.  
30.0Vp-p max.  
30.0Vp-p max.  
30.0Vp-p max.  
25.0Vp-p max.  
[3Vp-p,4kHz,square wave,10cm] [1Vrms,4kHz,sine wave,10cm]  
75 min. 75 min.  
17.0 30ꢀ  
[120Hz]  
[3Vp-p,2kHz,square wave,10cm] [1Vrms,2kHz,sine wave,10cm]  
70 min. 70 min.  
19.0 30ꢀ  
[120Hz]  
PKM22EPPH2001-B0  
PKM22EPPH4001-B0  
PKM22EPPH4005-B0  
PKM22EPPH4007-B0  
PKM22EPTH2001-B0  
[3Vp-p,2kHz,square wave,10cm] [1Vrms,2kHz,sine wave,10cm]  
75 min. 75 min.  
12.0 30ꢀ  
[1kHz]  
[3Vp-p,4kHz,square wave,10cm] [1Vrms,4kHz,sine wave,10cm]  
75 min. 75 min.  
12.0 30ꢀ  
[1kHz]  
[3Vp-p,4kHz,square wave,10cm] [1Vrms,4kHz,sine wave,10cm]  
85 min. 85 min.  
12.0 30ꢀ  
[1kHz]  
[3Vp-p,4kHz,square wave,10cm] [1Vrms,4kHz,sine wave,10cm]  
70 min. 70 min.  
[3Vp-p,2kHz,square wave,10cm] [1Vrms,2kHz,sine wave,10cm]  
19.0 30ꢀ  
[120Hz]  
9
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
Freq. Response (Square Wave 3Vp-p, 10cm)  
c
PKM13EPYH4002-B0  
PKM17EPP-2002-B0  
100  
90  
100  
Input Voltage: 3.00 Vo-p Square  
Distance: 10cm  
Input Voltage: 3.00 Vp-p Square  
Distance: 10cm  
90  
80  
80  
70  
60  
70  
2
60  
50  
40  
50  
40  
100  
500  
1k  
5k  
10k  
20k  
100  
500  
1k  
5k  
5k  
5k  
5k  
10k  
10k  
10k  
10k  
20k  
20k  
20k  
20k  
Frequency (Hz)  
Frequency (Hz)  
PKM17EPPH4001-B0  
PKM22EPH2001  
100  
100  
90  
Input Voltage: 3.00 Vp-p Square  
Distance: 10cm  
Input Voltage: 3.00 Vp-p Square  
Distance: 10cm  
90  
80  
70  
60  
80  
70  
60  
50  
40  
50  
40  
100  
500  
1k  
5k  
10k  
20k  
100  
500  
1k  
Frequency (Hz)  
Frequency (Hz)  
PKM22EPPH2001-B0  
PKM22EPPH4001-B0  
100  
90  
100  
90  
Input Voltage: 3.00 Vp-p Square  
Distance: 10cm  
Input Voltage: 3.00 Vp-p Square  
Distance: 10cm  
80  
80  
70  
70  
60  
60  
50  
40  
50  
40  
100  
500  
1k  
5k  
10k  
20k  
100  
500  
1k  
Frequency (Hz)  
Frequency (Hz)  
PKM22EPPH4005-B0  
PKM22EPPH4007-B0  
110  
100  
90  
100  
90  
Input Voltage: 3.00 Vp-p Square  
Distance: 10cm  
Input Voltage: 3.00 Vp-p Square  
Distance: 10cm  
80  
80  
70  
70  
60  
60  
50  
50  
40  
100  
500  
1k  
5k  
10k  
20k  
100  
500  
1k  
Frequency (Hz)  
Frequency (Hz)  
Continued on the following page.  
10  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
Continued from the preceding page.  
Freq. Response (Square Wave 3Vp-p, 10cm)  
c
PKM22EPTH2001-B0  
100  
Input Voltage: 3.00 Vp-p Square  
Distance: 10cm  
90  
80  
70  
60  
2
50  
40  
100  
500  
1k  
5k  
10k  
20k  
Frequency (Hz)  
Freq. Response (Sine Wave 1Vrms, 10cm)  
c
PKM13EPYH4002-B0  
PKM17EPP-2002-B0  
100  
90  
100  
Input Voltage: 1.00 Vrms Sine  
Distance: 10cm  
Input Voltage: 1.00 Vrms Sine  
Distance: 10cm  
90  
80  
80  
70  
60  
70  
60  
50  
40  
50  
40  
100  
500  
1k  
5k  
5k  
5k  
10k  
10k  
10k  
20k  
20k  
20k  
100  
500  
1k  
5k  
10k  
20k  
Frequency (Hz)  
Frequency (Hz)  
PKM17EPPH4001-B0  
PKM22EPH2001  
100  
100  
Input Voltage: 1.00 Vrms Sine  
Distance: 10cm  
Input Voltage: 1.00 Vrms Sine  
Distance: 10cm  
90  
80  
70  
60  
90  
80  
70  
60  
50  
40  
50  
40  
100  
500  
1k  
5k  
10k  
20k  
100  
500  
1k  
Frequency (Hz)  
Frequency (Hz)  
PKM22EPPH2001-B0  
PKM22EPPH4001-B0  
100  
90  
100  
90  
Input Voltage: 1.00 Vrms Sine  
Distance: 10cm  
Input Voltage: 1.00 Vrms Sine  
Distance: 10cm  
80  
80  
70  
70  
60  
60  
50  
40  
50  
40  
100  
500  
1k  
100  
500  
1k  
5k  
10k  
20k  
Frequency (Hz)  
Frequency (Hz)  
Continued on the following page.  
11  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
Continued from the preceding page.  
Freq. Response (Sine Wave 1Vrms, 10cm)  
c
PKM22EPPH4005-B0  
PKM22EPPH4007-B0  
100  
110  
100  
90  
Input Voltage: 1.00 Vrms Sine  
Distance: 10cm  
Input Voltage: 1.00 Vrms Sine  
Distance: 10cm  
90  
80  
70  
60  
80  
2
70  
50  
40  
60  
50  
100  
500  
1k  
5k  
10k  
20k  
100  
500  
1k  
5k  
10k  
20k  
Frequency (Hz)  
Frequency (Hz)  
PKM22EPTH2001-B0  
100  
Input Voltage: 1.00 Vrms Sine  
Distance: 10cm  
90  
80  
70  
60  
50  
40  
100  
500  
1k  
5k  
10k  
20k  
Frequency (Hz)  
12  
• Please read rating and !°AUTION (for storageꢁ operatingꢁ ratingꢁ solderingꢁ mounting and handling) in this catalog to preꢂent smoking and/or burningꢁ etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Thereforeꢁ please reꢂiew our product specifications or consult the approꢂal sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1ꢁ2012  
Piezoelectric Sounders (External Drive Pin Type) Circuit/Notice  
Circuit  
c
The following are examples of externally driven circuits.  
(1) Unstable multi-vibrator using Tr.  
(2) Circuits using inverters or NAND gates.  
2
(1)  
(2)  
+V  
+V  
0.001μF  
120kΩ  
1MΩ  
510Ω 20kΩ  
20kΩ 510Ω 1kΩ  
1kΩ  
1kΩ  
1kΩ  
0.01μF 0.01μF  
Input  
Notice (Soldering and Mounting)  
c
1. Notice (Soldering and Mounting)  
2. Washing of the component is prohibited because  
it is not sealed.  
(1) Soldering Iron  
(a) Immerse lead terminals up to 1.5mm from  
3. For Part Numbers mentioned belowꢁ please do not  
insert the component on double-sided P°B with  
plated through hole. When melted solder touches  
the base of lead terminalꢁ a part of the plastic case  
may meltꢁ causing electrical failure.  
component's body in soldering bath of +260 5ꢀ°  
for 10 1.0 secondsꢁ and then leaꢂe components  
in natural conditions for 4 hours.  
(b) Directly contact the lead terminal with the  
tip of the soldering iron for +350 5ꢀ° for  
3.0 0.5 secondsꢁ and then leaꢂe components  
in natural conditions for 4 hours.  
· Part Number  
PKM13EPYH4002-B0/PKM17EPP-2002-B0  
PKM17EPPH4001-B0/PKM22EPPH2001-B0  
PKM22EPPH4001-B0/PKM22EPPH4007-B0  
(2) Reflow  
The component cannot withstand reflow soldering.  
Notice (Handling)  
c
1. The component may be damaged if mechanical stress  
exceeding specifications is applied.  
2. Take care to protect the operating circuit from surge  
voltage resulting from excessive force, falling, shock or  
temperature change.  
3. If DC voltage is applied to the component, silver migration  
may occur. Please strictly avoid subjecting the  
component to DC voltage for long periods.  
4. The resistor should be used as shown in Fig. A.  
A suitable resistance value should be chosen, preferably  
1kΩ to 2kΩ. Instead of this measure, a diode may also be  
applied as shown in Fig. B.  
R
IC  
IC  
Fig. A  
Fig. B  
5. Avoid excessive pulling of the lead wire because the wire  
may break or the soldering point come off.  
13  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
Piezoelectric Sound Components  
Piezoelectric Sounders External Drive Pin Type Taping  
Taking advantage of extensive automatic insertion  
design technology and materials experience, Murata  
has developed standard taping type piezoelectric  
sounders.  
ø12.6  
This Murata technology supports labor and cost saving  
measures.  
5.0  
2–ø0.5  
3
Features  
c
2–ø1.0  
2–ø2.5  
1. Lead dimension: Improved mounting reliability  
(cut & clinch) due to round terminal  
2. High, stable mountability  
(in mm)  
Tol.: 0.5  
3. Ammo packaging  
Sound  
Pressure Level  
(dB)  
Sound Pressure  
Level (Ref. only)  
(dB)  
Operating  
Storage  
Operating  
Voltage Range  
Capacitance  
(nF)  
Part Number  
Temp. Range Temp. Range  
(°C)  
(°C)  
70 min.  
70 min.  
5.5 30ꢀ  
[1kHz]  
PKM13EPYH4000-A0  
30.0Vp-p max.  
-40 to +85  
-40 to +85  
[3Vp-p,4kHz,square wave,10cm] [1Vrms,4kHz,sine wave,10cm]  
Freq. Response (Square Wave 3Vp-p, 10cm)  
Freq. Response (Sine Wave 1Vrms, 10cm)  
c
c
100  
100  
Input Voltage: 3.00 Vp-p Square  
Input Voltage: 1.00 Vrms Sine  
Distance: 10cm  
90  
Distance: 10cm  
90  
80  
70  
60  
80  
70  
60  
50  
40  
50  
40  
100  
500  
1k  
5k  
10k  
20k  
100  
500  
1k  
5k  
10k  
20k  
Frequency (Hz)  
Frequency (Hz)  
14  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
Taping Dimension  
c
dh dh  
P2  
P
dS  
D
d1  
3
P1  
F
t
D0  
P0  
Item  
Code  
D
Nominal Value  
ø12ꢀ6  
Tol.  
0ꢀ.  
0ꢀ.  
0ꢀ1  
Notes  
Width of diameter  
A
6ꢀ9  
Height of component  
Dimensions of terminal  
d1  
ø0ꢀ.  
Lead length under the  
hold-down tape  
L1  
8ꢀ0 minꢀ  
—
P
2.ꢀ4  
12ꢀꢁ  
3ꢀ8.  
0ꢀ.  
0ꢀ2  
0ꢀꢁ  
Pitch of component  
Pitch of sprocket  
P0  
P1  
Tolerance for Pitches 10ZP0=12ꢁ 2mm  
Length from hole center to lead  
Length from hole center to  
component center  
P2  
6ꢀ3.  
0ꢀꢁ  
F
.ꢀ0  
0ꢀ.  
1ꢀ0  
0ꢀ.  
—
Lead spacing  
dh  
W
0
360°: 1mm maxꢀ  
Slant forward or backward  
Width of carrier tape  
Width of hold-down tape  
Position of sprocket hole  
18ꢀ0  
12ꢀ. minꢀ  
9ꢀ0  
W0  
W1  
Hold-down tape does not exceed the carrier tapeꢀ  
0ꢀ.  
Gap of hold-down tape and  
carrier tape  
W2  
H0  
2ꢀ0 maxꢀ  
18ꢀ0  
—
Distance between the center of  
sprocket hole and lead stopper  
0ꢀ.  
H1  
D0  
t
26ꢀ0 maxꢀ  
—
Total height of component  
Diameter of sprocket hole  
Total thickness of tape  
Body tilt  
ø4ꢀ0  
0ꢀ6  
0
0ꢀ2  
0ꢀ2  
1ꢀ0  
dS  
(in mm)  
15  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
Piezoelectric Sounders (External Drive Pin Type Taping) Circuit/Notice  
Circuit  
c
The following are examples of externally driven circuits.  
(1) Unstable multi-vibrator using Tr.  
(2) Circuits using inverters or NAND gates.  
(1)  
(2)  
+V  
+V  
0.001μF  
120kΩ  
1MΩ  
510Ω 20kΩ  
20kΩ 510Ω 1kΩ  
1kΩ  
1kΩ  
1kΩ  
0.01μF 0.01μF  
Input  
3
Notice (Soldering and Mounting)  
c
1. Notice (Soldering and Mounting)  
2. Please do not insert the component on double-sided  
PCB with plated through hole. When melted solder  
touches the base of lead terminal, a part of the plastic  
case may melt, causing electrical failure.  
(1) Soldering Iron  
(a) Immerse lead terminals up to 1.5mm from  
component's body in soldering bath of +260 5ꢀC  
for 10 1.0 seconds, and then leave components  
in natural conditions for 4 hours.  
3. Washing of the component is not acceptable.  
Because it is not sealed.  
(b) Directly contact the lead terminal with the  
tip of the soldering iron for +350 5 ꢀC for  
3.0 0.5 seconds, and then leave components  
in natural conditions for 4 hours.  
(2) Reflow  
The component cannot withstand reflow soldering.  
Notice (Handling)  
c
1. The component may be damaged if mechanical stress  
exceeding specifications is applied.  
2. Take care to protect the operating circuit from surge  
voltage resulting from excessive force, falling, shock or  
temperature change.  
3. If DC voltage is applied to the component, silver migration  
may occur. Please strictly avoid subjecting the  
component to DC voltage for long periods.  
4. The resistor should be used as shown in Fig. A.  
A suitable resistance value should be chosen, preferably  
1kΩ to 2kΩ. Instead of this measure, a diode may also be  
applied as shown in Fig. B.  
R
IC  
IC  
Fig. A  
Fig. B  
5. Avoid excessive pulling of the lead wire because the wire  
may break or the soldering point come off.  
16  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
Piezoelectric Sound Components  
Piezoelectric Sounders External Drive Lead Wire Type  
øꢀ6.8  
Microcomputers are widely used for microwave  
ovens, air conditioners, cars, toys, timers, and  
alarm equipment. Externally driven piezoelectric  
sounders are used in digital watches, electronic  
calculators, telephones and other equipment.  
They are driven by a signal (ex.: 2048Hz or 4096Hz)  
from an LSI and provide melodious sound.  
Features  
1. Low power consumption  
c
PKM17EWH2001  
(in mm)  
Tol.: ±0.±  
2. No contacts; therefore, noiseless and highly reliable  
Applications  
1. Various office equipment such as PPCs, printers and  
c
4
øꢀ6.8±0.ꢁ  
keyboards  
2. Audible feedback-response to some action or input.  
3. Confirmation sound of various audio equipment  
PKM17EWH4000  
(in mm)  
Sound  
Pressure Level  
(dB)  
Sound Pressure  
Operating  
Storage  
Operating  
Voltage Range  
Capacitance  
(nF)  
Part Number  
PKM17EWH2001  
PKM17EWH4000  
Level (Ref. only)  
(dB)  
Temp. Range Temp. Range  
(°C)  
(°C)  
72 min.  
70 min.  
40.0 30ꢀ  
[120Hz]  
7.0Vp-p max.  
-20 to +70  
-30 to +80  
[3Vp-p,2kHz,square wave,10cm] [1Vrms,2kHz,sine wave,10cm]  
75 min. 70 min.  
[3Vp-p,4kHz,square wave,10cm] [1Vrms,4kHz,sine wave,10cm]  
9.5 30ꢀ  
[1kHz]  
25.0Vp-p max.  
-20 to +70  
-30 to +80  
Freq. Response (Square Wave 3Vp-p, 10cm)  
c
PKM17EWH2001  
PKM17EWH4000  
ꢀ00  
ꢀ00  
Input Voltage: 3.00 Vp-p Square  
Distance: ꢀ0 cm  
Input Voltage: 3.00 Vp-p Square  
Distance: ꢀ0cm  
90  
90  
80  
70  
60  
80  
70  
60  
±0  
40  
±0  
40  
ꢀ00  
±00  
ꢀk  
±k  
ꢀ0k  
ꢁ0k  
ꢀ00  
±00  
ꢀk  
±k  
ꢀ0k  
ꢁ0k  
Frequency (Hz)  
Frequency (Hz)  
17  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
Freq. Response (Sine Wave 1Vrms, 10cm)  
c
PKM17EWH2001  
PKM17EWH4000  
100  
100  
90  
Input Voltage: 1.00 Vrms Sine  
Distance: 10 cm  
Input Voltage: 1.00 Vrms Sine  
Distance: 10cm  
90  
80  
70  
60  
50  
40  
80  
70  
60  
50  
40  
100  
500  
1k  
5k  
10k  
20k  
100  
500  
1k  
5k  
10k  
20k  
Frequency (Hz)  
Frequency (Hz)  
4
18  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
Piezoelectric Sounders (External Drive Lead Wire Type) Circuit/Notice  
Circuit  
c
The following are examples of externally driven circuits.  
(1) Unstable multi-vibrator using Tr.  
(2) Circuits using inverters or NAND gates.  
(1)  
(2)  
+V  
+V  
0.001μF  
120kΩ  
1MΩ  
510Ω 20kΩ  
20kΩ 510Ω 1kΩ  
1kΩ  
1kΩ  
1kΩ  
0.01μF 0.01μF  
Input  
Notice (Soldering and Mounting)  
c
Washing of the component is prohibited because it is  
not sealed.  
4
Notice (Handling)  
c
1. The component may be damaged if mechanical stress  
exceeding specifications is applied.  
2. Take care to protect the operating circuit from surge  
voltage resulting from excessive force, falling, shock or  
temperature change.  
3. If DC voltage is applied to the component, silver migration  
may occur. Please strictly avoid subjecting the  
component to DC voltage for long periods.  
4. The resistor should be used as shown in Fig. A.  
A suitable resistance value should be chosen, preferably  
1kΩ to 2kΩ. Instead of this measure, a diode may also be  
applied as shown in Fig. B.  
R
IC  
IC  
Fig. A  
Fig. B  
5. Avoid excessive pulling of the lead wire because the wire  
may break or the soldering point come off.  
19  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2ꢁ12  
Piezoelectric Sound Components  
Piezoelectric Sounders External Drive SMD Type  
Taking advantage of extensive acoustic and mechanical  
design technology and high performance ceramics,  
Murata has developed SMD piezoelectric sounders that  
suit the thin, high-density design of electronic  
equipment.  
(3.3)  
12.0  
Sound Emitting Hole  
(ø0.15) Open Hole  
1.1  
(3.0)  
Features  
c
Marking  
1. Small, thin and lightweight  
2. High sound pressure level and clear sound  
3. Reflowable  
PKLCS1212E2400-R1  
(
): Ref. only  
Tol.: 0.2  
4. Tape & Reel supply  
(in mm)  
10.0  
(1.9)  
12.0  
Sound Emitting Hole  
1.2  
5
(6.4)  
10.0  
PKLCS1212E4001-R1  
(
): Ref. only  
Tol.: 0.2  
(in mm)  
Operating  
Storage  
Sound Pressure Level  
(dB)  
Operating  
Voltage Range  
Part Number  
Temp. Range Temp. Range  
Use  
(°C)  
(°C)  
PKLCS1212E2400-R1 75 min.[ 1.5 ꢀo-p,2.4kHz,square wave,1ꢁcmꢂ  
PKLCS1212E24A0-R1 75 min.[ 1.5 ꢀo-p,2.4kHz,square wave,1ꢁcmꢂ  
12.5 ꢀo-p max.  
12.5 ꢀo-p max.  
25 ꢀp-p max.  
25 ꢀp-p max.  
-2ꢁ to +7ꢁ  
-4ꢁ to +85  
-2ꢁ to +7ꢁ  
-4ꢁ to +85  
-3ꢁ to +8ꢁ  
-4ꢁ to +85  
-3ꢁ to +8ꢁ  
-4ꢁ to +85  
For consumer electronics  
For automotive electronics  
For consumer electronics  
For automotive electronics  
PKLCS1212E4001-R1  
PKLCS1212E40A1-R1  
75 min.[3ꢀp-p,4kHz,square wave,1ꢁcmꢂ  
75 min.[3ꢀp-p,4kHz,square wave,1ꢁcmꢂ  
Standard Land Pattern Dimensions  
c
12.4  
10.0  
(in mm)  
2ꢁ  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
Freq. Response (Square Wave 3Vp-p, 10cm)  
c
PKLCS1212E2400-R1  
PKLCS1212E4001-R1  
100  
100  
90  
Input Voltage: 1.5Voꢀp Square  
Distance: 10cm  
Input Voltage: 3.00Vpꢀp Square  
Distance: 10cm  
90  
80  
80  
70  
60  
70  
60  
50  
50  
40  
1.0  
40  
1.0  
5.5  
6.0  
2.5  
5.0  
1.5  
2.0  
2.5  
3.0  
3.5  
4.0  
4.5  
5.0  
5.5  
6.0  
2.0  
3.5  
Frequency (kHz)  
1.5  
3.0  
4.5  
4.0  
Frequency (kHz)  
Taping Dimension  
c
Dimensions of Carrier Tape  
Dimensions of Reel  
4.0 0.1  
+0.1  
ø1.50  
ꢀ0.0  
2.0 0.1  
Trailer  
160–200  
Components  
Cover Film  
2.2 0.2  
240–280  
Empty  
400–560  
Leader  
5
25.5 0.5  
33.5 max.  
13.0 0.2  
16.0 0.1  
3.1 0.1  
Direction of Feed  
Cover film peel strength force: 0.1–0.7N  
Cover film peel speed: 300mm/min.  
Cover Film  
12.5 0.1  
10°  
(in mm)  
21  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
Piezoelectric Sounders (External Drive SMD Type) Circuit/Notice  
Circuit  
c
The following are examples of externally driven circuits.  
(1) Unstable multi-vibrator using Tr.  
(2) Circuits using inverters or NAND gates.  
(1)  
(2)  
+V  
+V  
0.001μF  
120kΩ  
1MΩ  
510Ω 20kΩ  
20kΩ 510Ω 1kΩ  
1kΩ  
1kΩ  
1kΩ  
0.01μF 0.01μF  
Input  
Notice (Soldering and Mounting)  
c
Washing of the component is prohibited because it is  
not sealed.  
Notice (Handling)  
c
1. The component may be damaged if mechanical stress  
exceeding specifications is applied.  
2. Take care to protect the operating circuit from surge  
voltage resulting from excessive force, falling, shock or  
temperature change.  
5
3. If DC voltage is applied to the component, silver migration  
may occur. Please strictly avoid subjecting the  
component to DC voltage for long periods.  
4. The resistor should be used as shown in Fig. A.  
A suitable resistance value should be chosen, preferably  
1kΩ to 2kΩ. Instead of this measure, a diode may also be  
applied as shown in Fig. B.  
R
IC  
IC  
Fig. A  
Fig. B  
5. Avoid excessive pulling of the lead wire because the wire  
may break or the soldering point come off.  
22  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
Piezoelectric Sound Components  
Piezoelectric Ringers (PIEZORINGER )  
r
As the result of rapid development of ICs in  
telephones, demand for piezoelectric sounders as  
telephone ringers has also rapidly increased. To  
effectively satisfy this rising demand, Murata  
provides a suitable piezoelectric sounder called  
"PIEZORINGER" with the following features.  
R18.5  
120˚  
+0  
–0.4  
33  
(in mm)  
Tol.: 0.5  
Features  
c
0.4  
1. Extremely clear sound  
Part Number  
PKM33EPH1201C  
PKM33EPH1202C  
PKM33EPH1201C  
2. Since it is voltage driven, the power consumption  
is negligible.  
5.0  
0
3. It can be driven directly from ICs.  
4. Thin and lightweight  
46.0  
40.0  
61.0  
52.0  
ø2.8  
2–ø3.5  
3.3  
ø34.5  
PKM34EWH1101C/1201C  
PKM44EWH1001C  
(in mm)  
Tol.: 0.5  
(in mm)  
Tol.: 0.5  
6
Pin Type  
Sound  
Pressure Level  
(dB)  
Sound Pressure  
Level (Ref. only)  
(dB)  
Operating  
Storage  
Operating  
Voltage Range  
Capacitance  
(nF)  
Part Number  
Temp. Range Temp. Range  
(°C)  
(°C)  
68 min.  
65 min.  
40.0 30ꢀ  
[120Hz]  
PKM33EPH1201C  
40.0Vp-p max.  
-20 to +70  
-30 to +80  
[30Vp-p,1.2kHz,square wave,1m] [1Vrms,1.2kHz,sine wave,10cm]  
Lead Wire Type  
Sound  
Pressure Level  
(dB)  
Sound Pressure  
Level (Ref. only)  
(dB)  
Operating  
Storage  
Operating  
Voltage Range  
Capacitance  
(nF)  
Part Number  
Temp. Range Temp. Range  
(°C)  
(°C)  
70 min.  
60 min.  
40.0 30ꢀ  
[120Hz]  
PKM34EWH1101C  
40.0Vp-p max.  
60.0Vp-p max.  
30.0Vp-p max.  
-20 to +70  
-30 to +80  
[30Vp-p,1.1kHz,square wave,1m] [1Vrms,1.1kHz,sine wave,10cm]  
70 min. 60 min.  
32.0 30ꢀ  
[120Hz]  
PKM34EWH1201C  
PKM44EWH1001C  
-20 to +70  
-20 to +70  
-30 to +80  
-30 to +80  
[30Vp-p,1.2kHz,square wave,1m] [1Vrms,1.2kHz,sine wave,10cm]  
75 min. 70 min.  
68.0 30ꢀ  
[120Hz]  
[30Vp-p,1kHz,square wave,1m] [1Vrms,1kHz,sine wave,10cm]  
23  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
Freq. Response (Square Wave 30Vp-p, 1m)  
c
PKM33EPH1201C  
PKM34EWH1101C  
100  
90  
80  
70  
60  
50  
40  
100  
Input Voltage: 30Vp-p Square  
Distance: 1m  
Input Voltage: 30 Vp-p Square  
Distance: 1m  
90  
80  
70  
60  
50  
40  
100  
500  
1k  
5k  
10k  
20k  
100  
500  
1k  
5k  
10k  
20k  
Frequency (Hz)  
Frequency (Hz)  
PKM34EWH1201C  
PKM44EWH1001C  
100  
100  
90  
Input Voltage: 30Vp-p Square  
Distance: 1m  
Input Voltage: 30 Vp-p Square  
Distance: 1m  
90  
80  
70  
60  
80  
70  
60  
50  
40  
50  
40  
100  
500  
1k  
5k  
10k  
20k  
100  
500  
1k  
5k  
10k  
20k  
Frequency (Hz)  
Frequency (Hz)  
Freq. Response (Sine Wave 1Vrms, 10cm)  
c
PKM33EPH1201C  
PKM34EWH1101C  
100  
90  
80  
70  
60  
50  
40  
100  
Input Voltage: 1Vrms Sine  
Distance: 10cm  
Input Voltage: 1.00 Vrms Sine  
Distance: 10cm  
6
90  
80  
70  
60  
50  
40  
100  
500  
1k  
5k  
10k  
20k  
100  
500  
1k  
5k  
10k  
20k  
Frequency (Hz)  
Frequency (Hz)  
PKM34EWH1201C  
PKM44EWH1001C  
100  
100  
90  
80  
70  
60  
50  
40  
Input Voltage: 1Vrms Sine  
Distance: 10cm  
Input Voltage: 1.00 Vrms Sine  
Distance: 10cm  
90  
80  
70  
60  
50  
40  
100  
500  
1k  
5k  
10k  
20k  
100  
500  
1k  
5k  
10k  
20k  
Frequency (Hz)  
Frequency (Hz)  
Continued on the following page.  
24  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
Piezoelectric Ringers (PIEZORINGER ) Notice  
r
Notice (Soldering and Mounting)  
c
1. Notice (Soldering and Mounting)  
(1) Soldering Iron  
(a) Immerse lead terminals up to 1.5mm from  
component's body in soldering bath of +260 5ꢀC  
for 10 1.0 seconds, and then leave components  
in natural conditions for 4 hours.  
(b) Directly contact the lead terminal with the  
tip of the soldering iron for +350 5ꢀC for  
3.0 0.5 seconds, and then leave components  
in natural conditions for 4 hours.  
(2) Reflow  
The component cannot withstand reflow soldering.  
2. Washing of the component is prohibited because  
it is not sealed.  
Notice (Handling)  
c
1. The component may be damaged if mechanical stress  
exceeding specifications is applied.  
2. Take care to protect the operating circuit from surge  
voltage resulting from excessive force, falling, shock or  
temperature change.  
3. If DC voltage is applied to the component, silver migration  
may occur. Please strictly avoid subjecting the  
component to DC voltage for long periods.  
4. The resistor should be used as shown in Fig. A.  
A suitable resistance value should be chosen, preferably  
1kΩ to 2kΩ. Instead of this measure, a diode may also be  
applied as shown in Fig. B.  
R
IC  
IC  
6
Fig. A  
Fig. B  
5. Avoid excessive pulling of the lead wire because the wire  
may break or the soldering point come off.  
25  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
Piezoelectric Sound Components  
Piezoelectric Sounders Self Drive Pin Type  
Piezoelectric sounder self drive type requires only a  
simple circuit and DC power supply. Since this type  
uses a resonant system, it is also available for alarms  
that need large sound volume.  
Hole pattern  
1±.9  
12.3  
G
G
M
M
18˚  
18˚  
F
13±˚  
8.ꢀ  
ø3-1.2  
F
Applications  
c
ø24.±  
1. Gas alarms, burglar alarms, smoke detectors  
2. Air conditioners, microwave ovens, washing machines  
and other home-electronic appliances controlled by  
microcomputers  
(in mm)  
Tol.: ±±.ꢀ  
Part Number  
PKM24SPH3805  
PKM24SPH38±ꢀ  
PKM24SPH381±  
PKM24SPH38±7  
PKM24SPH38±1  
4.±  
8.±  
12.±  
14.±  
3. Toys, game machines  
Sound  
Pressure Level  
(dB)  
Oscillating  
Frequency  
(kHz)  
Current  
Consumption  
(mA)  
Operating  
Temp. Range  
(°C)  
Storage  
Temp. Range  
(°C)  
Operating  
Voltage Range  
Part Number  
90 min.  
[12Vdc,10cm]  
3.8 0.ꢀkꢁz  
[12Vdc]  
12 max.  
[12Vdc]  
PKM24SPH3805  
3.0 to 20.0Vdc  
-20 to +70  
-30 to +80  
Standard Circuit Examples  
c
Vdc  
62±Ω  
1ꢀ±kΩ  
M
F
3.9kΩ  
G
Tr.  
GND  
Tr: 2SC181ꢀY or equivalent  
7
26  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
Piezoelectric Sounders (Self Drive) Notice  
Notice (Soldering and Mounting)  
c
1. Notice (Soldering and Mounting)  
2. Washing of the component is prohibited because  
it is not sealed.  
(1) Soldering Iron  
(a) Immerse lead terminals up to 1.5mm from  
component's body in soldering bath of +260 5ꢀC  
for 10 1.0 seconds, and then leave components  
in natural conditions for 4 hours.  
3. Please do not cover the hole with tape or any  
other obstacle as this will produce irregular  
oscillation.  
4. Do not place any obstacle within 15mm of the  
top of the component as this will produce  
irregular oscillation.  
(b) Directly contact the lead terminal with the  
tip of the soldering iron for +350 5ꢀC for  
3.0 0.5 seconds, and then leave components  
in natural conditions for 4 hours.  
(2) Reflow  
The component cannot withstand reflow soldering.  
Notice (Handling)  
c
1. The component may be damaged if mechanical stress  
4. The standard self-driven circuits utilizes  
transistor switching. Since the circuit constants  
for hfe of the transistor are optimally chosen to  
maintain stable oscillation, please design a circuit  
following the standard.  
exceeding specifications is applied.  
2. Take care to protect the operating circuit from surge  
voltage resulting from excessive force, falling, shock  
or temperature change.  
3. If DC voltage is applied to the component, silver  
migration may occur. Please strictly avoid subjecting  
the component to DC voltage for long periods.  
7
27  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smo5ing and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
Piezoelectric Sound Components  
Piezoelectric Buzzers Pin Type  
This is a unified piezoelectric sounder that has a  
piezoelectric diaphragm of 3 terminals connected to a  
self drive circuit, and it easily generates sound with  
only a DC power supply (DC3.0-20V). Using a suitably  
designed resonant system, this type can be used where  
large sound volumes are needed.  
R±.0  
24.ꢀ±0.ꢀ  
±5.0  
Applications  
c
0.6±0.±  
1. Gas alarms, burglar alarms  
PKB24SPCH3601-B0  
2. Air conditioners, microwave ovens and various types  
of microcomputer controlled home-electronic  
appliances  
(in mm)  
Tol.: ±0.5  
3. Toys, games, and other simple electronic devices  
such as teaching aids  
Sound  
Pressure Level  
(dB)  
Oscillating  
Frequency  
(kHz)  
Current  
Consumption  
(mA)  
Operating  
Temp. Range  
(°C)  
Storage  
Temp. Range  
(°C)  
Operating  
Voltage Range  
Part Number  
90 min.  
[12Vdc,10cm]  
3.6 0.ꢀ5kz  
[12Vdc]  
16 max.  
[12Vdc]  
PKB24SPCH3601-B0  
3.0 to 1ꢀ.0Vdc  
-20 to +70  
-30 to +80  
Voltage-Sound Pressure Level/Voltage-Consumption Current  
c
±±0  
25  
±00  
20  
±5  
±0  
Sound Pressure Level  
90  
80  
Consumption Current  
5
0
5
±0  
Input Voltage (Vdc)  
±5  
8
28  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
Piezoelectric Buzzers Notice  
Notice (Soldering and Mounting)  
c
1. Notice (Soldering and Mounting)  
2. Washing of the component is prohibited because  
it is not sealed.  
(1) Soldering Iron  
(a) Immerse lead terminals up to 1.5mm from  
component's body in soldering bath of +260 5ꢀC  
for 10 1.0 seconds, and then leave components  
in natural conditions for 4 hours.  
3. Please do not cover the hole with tape or any  
other obstacle as this will produce irregular  
oscillation.  
4. Do not place any obstacle within 15mm of the  
top of the component as this will produce  
irregular oscillation.  
(b) Directly contact the lead terminal with the  
tip of the soldering iron for +350 5ꢀC for  
3.0 0.5 seconds, and then leave components  
in natural conditions for 4 hours.  
(2) Reflow  
The component cannot withstand reflow soldering.  
Notice (Handling)  
c
1. The component may be damaged if mechanical stress  
over this specification is applied.  
2. Resistors should not be connected in series to the power  
supply as this will produce irregular oscillation. When a  
resistor is necessary to control sound volume, use a  
capacitor (1μF) in parallel with the buzzer together.  
+Vdc  
Capacitor  
Buzzer  
(1μF)  
3. Avoid excessive pulling of the lead wire because the wire  
may break or the soldering point come off.  
8
29  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
Piezoelectric Sound Components Notice  
Notice (Storage and Operating Condition)  
c
1. Product Storage Condition  
(2) Please do not put the products directly on the  
floor without anything under them to avoid damp  
places and/or dusty places.  
Please store the products in a room where the  
temperature/humidity is stable and avoid places  
where there are large temperature changes.  
Please store the products under the following  
conditions:  
(3) Please do not store the products in places such  
as: in a damp heated place or any place exposed  
to direct sunlight or excessive vibration.  
(4) Please use the products immediately after the  
package is opened, because the characteristics  
may be reduced in quality, and/or be degraded in  
the solderability due to storage under poor  
conditions.  
Temperature: -10 to + 40ꢀC  
Humidity: 15 to 85% R.H.  
2. Expiration Date on Storage  
Expiration date (shelf life) of the products is six  
months after delivery under the conditions of a  
sealed and unopened package. Please use the  
products within six months after delivery. If you  
store the products for a long time (more than six  
months), use carefully because the products may  
be degraded in solderability due to storage under  
poor conditions.  
(5) Please do not drop the products to avoid cracking  
of the ceramic element.  
4. Other  
Please be sure to consult with our sales  
representative or engineer whenever the products  
are to be used in conditions not listed above.  
Please confirm solderability and characteristics  
for the products regularly.  
3. Notice on Product Storage  
(1) Please do not store the products in a chemical  
atmosphere (Acids, Alkali, Bases, Organic gas,  
Sulfides and so on), because the characteristics  
may be reduced in quality, may be degraded in  
solderability due to storage in a chemical  
atmosphere.  
30  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
Package  
Minimum Quantity (pcs.)  
c
Minimum Quantity  
Bulk (Box)  
Product Names  
Part Number  
Ø330mm Reel  
Ammo Pack  
o Piezoelectric Diaphragms*  
External Drive Types  
7BB-12-9  
5120  
8000  
3000  
1800  
600  
7BB-15-6  
7BB-20-3  
7BB-20-6  
7BB-20-6L0  
7BB-27-4  
1500  
600  
7BB-27-4L0  
7BB-35-3  
800  
7BB-35-3L0  
7BB-41-2  
400  
400  
7BB-41-2L0  
7NB-31R2-1  
7BB-20-6C  
7BB-20-6CL0  
7BB-27-4C  
7BB-27-4CL0  
7BB-35-3C  
7BB-35-3CL0  
7BB-41-2C  
7BB-41-2CL0  
7SB-34R7-3C  
250  
3000  
1800  
600  
Self Drive Types  
1500  
600  
800  
400  
600  
250  
800  
o Piezoelectric Sounders*  
External Drive Types  
PKLCS1212E2400-R1  
PKLCS1212E24A0-R1  
PKLCS1212E4001-R1  
PKLCS1212E40A1-R1  
PKM13EPYH4000-A0  
PKM13EPYH4002-B0  
PKM17EPP-2002-B0  
PKM17EPPH4001-B0  
PKM17EPPH4002-B0  
PKM17EWH2001  
1000  
1000  
1000  
1000  
500  
330  
200  
200  
200  
250  
500  
360  
270  
270  
750  
750  
900  
900  
750  
750  
750  
300  
PKM17EWH4000  
PKM22EPH2001  
PKM22EPH2002  
PKM22EPH2003  
PKM22EPPH2001-B0  
PKM22EPPH2002-B0  
PKM22EPPH4001-B0  
PKM22EPPH4002-B0  
PKM22EPPH4005-B0  
PKM22EPPH4007-B0  
PKM22EPPH4012-B0  
PKM22EPTH2001-B0  
Continued on the following page.  
"Minimum Quantity" means the number of units of each delivery or order. The quantity should be an integral multiple of the  
"Minimum Quantity." (As for products series with mark, bulk (bag) quantities shown here differ from actual delivery quantities in a package)  
*
Please contact the nearest sales office for details and for any other products not listed above.  
31  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
!Note  
P37E.pdf  
Feb.1,2012  
Package  
Continued from the preceding page.  
Minimum Quantity  
Product Names  
Part Number  
Ø330mm Reel  
Bulk (Box)  
270  
360  
270  
270  
650  
300  
60  
Ammo Pack  
PKM24SPH3801  
PKM24SPH3805  
PKM24SPH3807  
PKM24SPH3810  
PKB24SPCH3601-B0  
PKM33EPH1201C  
PKM33EPH1202C  
PKM34EWH1101C  
PKM34EWH1201C  
PKM44EWH1001C  
Self Drive Types  
o Piezoelectric Buzzers*  
Piezoelectric Ringers (PIEZORINGERr)  
o
*
25  
25  
25  
32  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
!Note  
P37E.pdf  
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.  
Feb.1,2012  

相关型号：

PKM240AB

 Glass passiated junction
SPSEMI

PKM240CB

 Glass passiated junction
SPSEMI

PKM24SPH3801

 Operating Temperature Range
MURATA

PKM24SPH3805

 EMIFIL (Capacitor type) Single Circuit Type for Signal Lines
MURATA

PKM24SPH3807

 Operating Temperature Range
MURATA

PKM24SPH3810

 Operating Temperature Range
MURATA

PKM2510EPI

 DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid, ROHS COMPLIANT, PACKAGE-8
ERICSSON

PKM2510EPILA

 DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid, ROHS COMPLIANT, PACKAGE-8
ERICSSON

PKM2511EPI

 DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid, ROHS COMPLIANT, PACKAGE-8
ERICSSON

PKM2511EPIHS

 DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid, ROHS COMPLIANT, PACKAGE-8
ERICSSON

PKM2511EPIPLA

 DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid, ROHS COMPLIANT, PACKAGE-8
ERICSSON

PKM2513EPIHS

 DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid, ROHS COMPLIANT, PACKAGE-8
ERICSSON
©2020 ICPDF网 联系我们和版权申明