DSS9NC52A101Q55B [MURATA]
Data Line Filter, 1 Function(s), 100V, 7A;
| 型号： | DSS9NC52A101Q55B |
| 厂家： | 
muRata |
| 描述： | Data Line Filter, 1 Function(s), 100V, 7A |
| 文件： | 总5页 (文件大小：106K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Noise Suppression Products/EMI Suppression Filters > Leaded EMIFILr (Capacitor type) > Standard Type
Data Sheet
1
Leaded EMIFILr (Capacitor type) Standard Type
DSN9N/DSS9N/DST9N Series
DSN9N Series
I Dimensions
I Insertion Loss Characteristics (Main Items)
(50Ω - 50Ω)
0
4.0 max.
9.5 max.
270pF
2200pF
20
40
22000pF
2.5 0.5
5.0 0.5
1.0 0.5
60
80
ø0.65
GND
I
Q55 Type: 25.0 min.
Q56 Type: 6.0 1.0
Q54 Type: 4.0 0.5
100
0.01
0.1
1
10
Frequency (MHz)
100
1000
(in mm)
I Rated Value (p: lead type/packaging code)
Operating
Temperature Range
Part Number
Capacitance
Rated Voltage
Rated Current
DSN9NC52A271p
DSN9NC52A222p
DSN9NC51H223p
270pF 20%
2200pF 20%
100Vdc
100Vdc
50Vdc
7A
7A
7A
-25 to +85°C
-25 to +85°C
-25 to +85°C
22000pF 50/-20%
Rated current is 6A for taping type and its lead diameter is phi 0.6mm and three terminal in line arrangement.
DSS9N Series
I Dimensions
I Insertion Loss Characteristics (Main Items)
12.0 max.
7.5 max.
*2
270pF
100pF
(50Ω - 50Ω)
0
47pF
22pF
Ferrite bead
2.5 0.5
20
40
2200pF(DSS9NB32A222)
2200pF(DSS9NP32A222)
2.5 0.5
22000pF(DSS9ND31H223)
22000pF(DSS9NT31H223)
5.0 0.5
60
80
ø0.65
I
GND
Q55 Type: 25.0 min.
Q56 Type: 6.0 1.0
Q54 Type: 4.0 0.5
(in mm)
100
*1 Coating extending on leads does not exceed the tangent line.
Exposed electrode, if any, is covered by solder, etc.
0.01
0.1
1
10
100
1000
*2 There should be no exposure of the ferrite bead if there is a hole
on top of the filter; the ferrite bead should not be exposed.
Frequency (MHz)
Continued on the following page.
o This data sheet is applied for Lead EMIFILr Capacitor Type used for General Electronics equipment for your design.
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2011.7.7
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > Leaded EMIFILr (Capacitor type) > Standard Type
Data Sheet
2
Continued from the preceding page.
I Rated Value (p: lead type/packaging code)
Operating
Temperature Range
Part Number
Capacitance
Rated Voltage
Rated Current
DSS9NC52A220p
DSS9NC52A470p
DSS9NC52A101p
DSS9NC52A271p
DSS9NC52A222p
DSS9NP32A222p
DSS9NC51H223p
DSS9NT31H223p
22pF 20%
47pF 20%
100Vdc
100Vdc
100Vdc
100Vdc
100Vdc
100Vdc
50Vdc
7A
7A
7A
7A
7A
7A
7A
7A
-25 to +85°C
-25 to +85°C
-25 to +85°C
-25 to +85°C
-25 to +85°C
-25 to +85°C
-25 to +85°C
-25 to +85°C
100pF 20%
270pF 20%
2200pF 20%
2200pF 20%
22000pF 50/-20%
22000pF 50/-20%
50Vdc
Rated current is 6A for taping type and its lead diameter is phi 0.6mm and three terminal in line arrangement.
DSS9NP32A222/DSS9NT31H223 are low distortion types for audio IF circuits.
DST9N Series
I Dimensions
I Insertion Loss Characteristics (Main Items)
(50Ω - 50Ω)
0
4.0 max.
9.5 max.
2200pF
20
40
270pF
22000pF
Ferrite bead
2.5 0.5
60
80
5.0 0.5
1.25 0.5
ø0.65
GND
Q55 Type: I=25.0 min.
Q50 Type: I1=4.0 0.5
100
0.01
0.1
1
10
Frequency (MHz)
100
1000
(in mm)
I Rated Value (p: lead type/packaging code)
Operating
Temperature Range
Part Number
Capacitance
Rated Voltage
Rated Current
DST9NC52A271p
DST9NC52A222p
DST9NC51H223p
270pF 20%
2200pF 20%
100Vdc
100Vdc
50Vdc
7A
7A
7A
-25 to +85°C
-25 to +85°C
-25 to +85°C
22000pF 50/-20%
Rated current is 6A for taping type and its lead diameter is phi 0.6mm and three terminal in line arrangement.
Continued on the following page.
o This data sheet is applied for Lead EMIFILr Capacitor Type used for General Electronics equipment for your design.
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2011.7.7
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > Leaded EMIFILr (Capacitor type) > Standard Type
Data Sheet
3
Continued from the preceding page.
I Equivalent Circuit
I Equivalent Circuit
DSN9N Series
DSS9N/DST9N Series
GND
GND
No polarity.
No polarity.
I Packaging
Minimum Quantity
Minimum Order Quantity (order in sets only) (Pcs.)
ø320mm
Part Number
Ammo Pack
Bulk (Bag)
Paper reel
250 Q55
DSN9 Series
DST9 Series
DSS9 Series
2000
1000
—
—
—
500 Q54/Q56
200 Q55
250 Q50/Q52
200 Q55
500 Q54/Q56
800
Lead Type/Packaging
Code
Q55B
Q50B
Q52B
Q54B
Q56B
T41B
T51B
Q91J
Q92J
Q93J
Q91A
Q92A
Q93A
U21A
U31A
Lead Type
Lead Length* (in mm)
25.0 min.
4.0 0.5
Packaging
Series
All series
DST9N/H
DST9N
Straight
Incrimp
6.0 1.0
4.0 0.5
Bulk
DSN6/9, DSS6/9
6.0 1.0
4.0 0.5
DSS6N
25.0 min.
20.0 1.0
16.5 1.0
18.5 1.0
20.0 1.0
16.5 1.0
18.5 1.0
16.5 1.0
18.5 1.0
Paper Reel (ø320mm) DSS9N/H
Straight
Incrimp
DSp6, DSN9N/H
All series except DSS9N/H
Ammo Pack
DSS6N
Lead Distance between Reference and Bottom Planes except Bulk.
*
Continued on the following page.
o This data sheet is applied for Lead EMIFILr Capacitor Type used for General Electronics equipment for your design.
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2011.7.7
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > Leaded EMIFILr (Capacitor type) > Standard Type
Data Sheet
4
Continued from the preceding page.
ꢀ Caution•Notice
!Caution
o Rating
Do not use products beyond the rated current and rated voltage as this
may create excessive heat and deteriorate the insulation resistance.
o Soldering and Mounting
1. Mounting holes should be designed as specified in these
specifications. Other designs than those shown in these
specifications may cause cracks in ceramics that may
lead to smoking or firing.
2. DSN9/DSS9/DST9/DSN9H/DSS9H/DST9H/VFS9V Series
Mounting for PCB. (Applis only to bulk type.)
Marking Side
The form of the mounting hole of the bulk item is a triangle.
The product should be inserted and soldered to each hole in
the correct way as in Fig.2. (The center terminal and the other
terminals become parallel when viewing the product from the
side.) Smoking and firing maybe caused by incorrect mounting
as in Fig.3. (The center terminal and the other terminals cross
when viewing the product from the side.)
Center Terminal
(Ground Terminal)
Fig.2 Right Way
Fig.3 Wrong Way
Continued on the following page.
o This data sheet is applied for Lead EMIFILr Capacitor Type used for General Electronics equipment for your design.
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2011.7.7
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > Leaded EMIFILr (Capacitor type) > Standard Type
Data Sheet
5
Continued from the preceding page.
Notice
o Storage and Operating Conditions
<Operating Environment>
2. Products should be used at rated voltage or less and
rated current or less.
1. Do not use products in a chemical atmosphere such
as chlorine gas, acid or sulfide gas.
3. Products should not be applied for the absorption of
surges that have large energy (e.g., induced lightning
surges, switching surges) because it is designed for the
absorption of electrostatic surges (VFR3V).
4. Electrostatic testing should be done on the following
conditions (VFR3V).
2. Do not use products near water, oil or organic
solvents. Avoid environments where dust or dirt may
adhere to the product.
<Storage and Handling Requirements>
1. Storage Period
n • [ C / R • V2 ]2 < 8.0 ×105
Use the products within 12 months after delivery.
Solderability should be checked if this period is
exceeded.
n: Times applied
C: Charging Capacitance (pF)
V: Testing Voltage (kV)
2. Storage Conditions
R: Charging Resistance (Ω)
(1) Storage temperature: -10 to 40 degrees C
Relative humidity: 15 to 85%
o Soldering and Mounting
1. Washing
Avoid sudden changes in temperature and humidity.
(2) Do not store products in a chemical atmosphere
such as chlorine gas, acid or sulfide gas.
(3) When restoring taping type (BL01RN1A1F1J),
please attach the spacer between the flanges of the
reel. The spacer is corrugated paper that is attached
when shipping.
Failure and degradation of a product are caused
by the washing method. When you wash in conditions
that are not in the mounting information, please contact
Murata engineering.
2. Soldering
<Using EMIGUARDr effectively>
Reliability decreases with improper soldering
methods. Please solder by the standard soldering
conditions shown in the mounting information.
3. Other
1. Terminal (with mark) should be properly connected to
the line of incoming electrostatic surge. (There is
polarity.) Otherwise, no effect in ESD suppression can
be expected (VFR3V).
Noise suppression levels resulting from Murata's
EMI suppression filters EMIFILr may vary, depending
on the circuits and ICs used, type of noise, mounting
pattern, lead wire length, mounting location, and other
operating conditions. Be sure to check and confirm in
advance the noise suppression effect of each filter, in
actual circuits, etc. before applying the filter in a
commercial-purpose equipment design.
Example of input terminal
Example of output terminal
Incoming
Electrostatic Surges
Incoming
Electrostatic Surges
o This data sheet is applied for Lead EMIFILr Capacitor Type used for General Electronics equipment for your design.
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2011.7.7
http://www.murata.com/
相关型号：
©2020 ICPDF网 联系我们和版权申明