M214224G2N-S10.000MHZ [MTRONPTI]

Oscillator,;


型号：	M214224G2N-S10.000MHZ
厂家：	MTRONPTI
描述：	Oscillator,
文件：	总7页 (文件大小：892K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

M21x Series Multiple Frequency Clock Oscillator

5x7 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML/HCMOS Output

Product Features

•ꢀ Multiple Output Frequencies (2, 3, or 4) - Selectable

•ꢀ QiK Chip^TMTechnology

•ꢀ Superior Jitter Performance (less than 0.25 ps RMS, 12 kHz

- 20 MHz)

QiK Chip™

•ꢀ SAW replacement - better performance

•ꢀ Frequencies from 50 MHz - 1.4 GHz (LVDS/LVPECL/CML)

•ꢀ Frequencies from 10 MHz - 150 MHz (HCMOS)

Product Description

The multiple frequency oscillator utilizes MtronPTI’s Qik Chip^TMtechnology to provide a very low jitter clock

for all output frequencies. The M21x is available with up to 4 different frequency outputs from 10MHz through

1.4 GHz. The M21x utilizes the stable fundamental 3rd overtone crystal and the Qik Chip^TMIC to provide the

wide range of output frequencies. Using this design approach, the M21x provides exceptional performance in

frequency stability, jitter, phase noise and long term reliability.

Product Applications

•ꢀ xDSL, Network Communications

•ꢀ Avionicꢀﬂightꢀcontrols

•ꢀ Military communications

•ꢀ Clock and data recovery

•ꢀ Low jitter clock generation

•ꢀ Frequency margining

•ꢀ Global/Regional selection

•ꢀ Forward Error Correction (FEC) / Selectable Functionality

applications

•ꢀ Telecommunications such as SONET / SDH / DWDM / FEC

/ SERDES / OC-3 thru OC-192

•ꢀ 1-2-4-10 Gigabit Fibre Channel

•ꢀ Wireless base stations / WLAN / Gigabit Ethernet

Product Ordering Information

MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.

Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application speciﬁc requirements at 800.762.8800 toll free or 605.665.9321.

Revision: 5-15-08

M21x Series Multiple Frequency Clock Oscillator

5x7 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML/HCMOS Output

Performance Characteristics

MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.

Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application speciﬁc requirements at 800.762.8800 toll free or 605.665.9321.

M21x Series Multiple Frequency Clock Oscillator

5x7 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML/HCMOS Output

Phase Noise Plot

Output Waveform

Output Waveform: LVDS/CML/LVPECL

MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.

Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application speciﬁc requirements at 800.762.8800 toll free or 605.665.9321.

M21x Series Multiple Frequency Clock Oscillator

5x7 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML/HCMOS Output

Product Dimension & Pinout Information

DENOTES PIN 1

MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.

Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application speciﬁc requirements at 800.762.8800 toll free or 605.665.9321.

M21x Series Multiple Frequency Clock Oscillator

5x7 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML/HCMOS Output

Handling Information

Although protection circuitry has been designed into the M21x oscillator, proper precautions should be taken to

avoid exposure to electrostatic discharge (ESD) during handling and mounting. MtronPTI utilizes a human-body

model (HBM) and a charged-device model (CDM) for ESD-susceptibility testing and protection design evaluation.

ESDꢀvoltageꢀthresholdsꢀareꢀdependentꢀonꢀtheꢀcircuitꢀparametersꢀusedꢀtoꢀdeﬁneꢀtheꢀmode.ꢀꢀAlthoughꢀnoꢀindustry-

wide standard has been adopted for the CDM, a standard HBM (resistance = 1500 Ω, capacitance = 100 pF) is

widely used and therefore can be used for comparison purposes. The HBM ESD threshold presented here was

obtained using these circuit parameters.

Quality Parameters

Part Marking Guide

Line 1: Model Number

Line 2: Frequency

Line 3: Date Code

Line 4: Pin 1 Indicator / MtronPTI

MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.

Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application speciﬁc requirements at 800.762.8800 toll free or 605.665.9321.

M21x Series Multiple Frequency Clock Oscillator

5x7 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML/HCMOS Output

Tape & Reel Speciﬁcations

(all measurements

are in mm)

M21x

6.51

9.29

1.5

7.5

2.8

8/12

180-330

60-100

Standard Tape and Reel: 1000 parts per reel

Maximum Soldering Conditions

Solder Conditions

Note: Exceeding these limits may damage the device.

MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.

Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application speciﬁc requirements at 800.762.8800 toll free or 605.665.9321.

M21x Series Multiple Frequency Clock Oscillator

5x7 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML/HCMOS Output

Typical Test Circuit & Load Circuit Diagrams

Product Revision Table

Date

Revision PCN Number Details of Revision

A 10118 IC Revision to improve phase noise and electrical performance

7/20/07

Forꢀcustomꢀproductsꢀorꢀadditionalꢀspeciﬁcationsꢀcontactꢀourꢀsalesꢀteamꢀat

800.762.8800 (toll free) or 605.665.9321

For more information on this product visit the MtronPTI website at

www.mtronpti.com

相关型号：