WJFX-U3A2-B 概述
Dual Output Plug-in Signal Conditioners W-UNIT
WJFX-U3A2-B 数据手册
通过下载WJFX-U3A2-B数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载MODEL: WJFX
H: 10 – 50 mA DC (Input resistance 100 Ω)
Dual Output Plug-in Signal Conditioners W-UNIT
Voltage
6: 1 – 5 V DC (Input resistance 1 MΩ min.)
U1: Range ±100 mV;
LINEARIZER
(field-programmable)
(Minimum span 3 mV, Input resistance 20 kΩ min.)
U2: Range ±1000 mV;
Functions & Features
• Accepting non-linear input and providing linearized
output, proportional to the process variables
• Micro-processor based
(Minimum span 30 mV, Input resistance 20 kΩ min.)
U3: Range ±10 V;
(Minimum span 0.3 V,Input resistance 1 MΩ min.)
• On-site calibration up to 16 points using a hand-held
programmer PU-2x
[2] OUTPUT 1
Current
• Field-programmable input range
• Isolation up to 2000 V AC
A: 4 – 20 mA DC (Load resistance 600 Ω max.)
B: 2 – 10 mA DC (Load resistance 1200 Ω max.)
C: 1 – 5 mA DC (Load resistance 2400 Ω max.)
D: 0 – 20 mA DC (Load resistance 600 Ω max.)
E: 0 – 16 mA DC (Load resistance 750 Ω max.)
F: 0 – 10 mA DC (Load resistance 1200 Ω max.)
G: 0 – 1 mA DC (Load resistance 12 kΩ max.)
Z: Specify current (See OUTPUT SPECIFICATIONS)
Voltage
• High-density mounting
Typical Applications
• V-notch weir
• Gas analyzer
• Irregular-shaped tank level input for volume calculation
• Square root extracting for DP transmitter
50
(1.97)
1: 0 – 10 mV DC (Load resistance 10 kΩ min.)
2: 0 – 100 mV DC (Load resistance 100 kΩ min.)
3: 0 – 1 V DC (Load resistance 1000 Ω min.)
4: 0 – 10 V DC (Load resistance 10 kΩ min.)
5: 0 – 5 V DC (Load resistance 5000 Ω min.)
6: 1 – 5 V DC (Load resistance 5000 Ω min.)
4W: -10 – +10 V DC (Load resistance 10 kΩ min.)
5W: -5 – +5 V DC (Load resistance 5000 Ω min.)
0: Specify voltage (See OUTPUT SPECIFICATIONS)
80
(3.15)
136
(5.35)
mm (inch)
MODEL: WJFX–[1][2][3]–[4][5]
[3] OUTPUT 2
Current
ORDERING INFORMATION
• Code number: WJFX-[1][2][3]-[4][5]
Specify a code from below for each of [1] through [5].
(e.g. WJFX-6A6-B/Q)
A: 4 – 20 mA DC (Load resistance 350 Ω max.)
B: 2 – 10 mA DC (Load resistance 700 Ω max.)
C: 1 – 5 mA DC (Load resistance 1400 Ω max.)
D: 0 – 20 mA DC (Load resistance 350 Ω max.)
E: 0 – 16 mA DC(Load resistance 430 Ω max.)
F: 0 – 10 mA DC (Load resistance 700 Ω max.)
G: 0 – 1 mA DC (Load resistance 7000 Ω max.)
Z: Specify current (See OUTPUT SPECIFICATIONS)
Voltage
• Special input and output ranges (For codes U1, U2, U3, Z
& 0)
• Linearization data (max. 16 points)
Use Ordering Information Sheet (No. ESU-1669) to specify
linearization data when the I/O signals are nonlinear.
• Specify the specification for option code /Q
(e.g. /C01/S01)
Same range availability as Output 1
Note: When the user requires a current and a voltage
output, specify the current to be the Output 1 which allows
a greater load.
[1] INPUT
Current
A: 4 – 20 mA DC (Input resistance 250 Ω)
WJFX SPECIFICATIONS
ES-2272 Rev.8 Page 1/4
http://www.m-system.co.jp/
MODEL: WJFX
configurable with JXCON.)
• Linearization data
• Input range
[4] POWER INPUT
AC Power
B: 100 V AC
C: 110 V AC
D: 115 V AC
F: 120 V AC
G: 200 V AC
H: 220 V AC
J: 240 V AC
• Zero and span
• Simulating output
• Others
Input range can be changed with Codes U1, U2 or U3 and
limited within ranges of each code type.
DC Power
INPUT SPECIFICATIONS
■ DC Current:
S: 12 V DC
R: 24 V DC
Shunt resistor attached to the input terminals (0.5 W)
■ DC Voltage: -10 – +10 V DC
Minimum span: 3 mV
V: 48 V DC
Offset: Max. 3 times span
[5] OPTIONS
blank: none
Default setting will be used if not otherwise specified.
U1: 0 – 100 mV DC
/Q: With options (specify the specification)
U2: 0 – 1 V DC
U3: 0 – 10 V DC
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
OUTPUT SPECIFICATIONS
■ DC Current: 0 – 20 mA DC
/C02: Polyurethane coating
Minimum span: 1 mA
/C03: Rubber coating
Offset: Max. 1.5 times span
TERMINAL SCREW MATERIAL
/S01: Stainless steel
Load resistance: Output drive 12 V max. for Output 1;
7 V max. for Output 2
■ DC Voltage: -10 – +10 V DC
Minimum span: 5 mV
RELATED PRODUCTS
• Programming Unit (model: PU-2x)
Offset: Max. 1.5 times span
• PC configurator software (model: JXCON)
Downloadable at M-System’s web site.
A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual for the PC configurator for applicable
cable types.
Load resistance: Output drive 1 mA max.; at ≥ 0.5 V
INSTALLATION
Power input
•AC: Operational voltage range: rating ±10 %,
50/60 ±2 Hz, approx. 3.5 VA
•DC: Operational voltage range: rating ±10 %, approx. 3 W
(110 mA at 24 V)
GENERAL SPECIFICATIONS
Construction: Plug-in
(ripple 10 %p-p max.)
Connection: M3.5 screw terminals
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail
Screw terminal: Chromated steel (standard) or stainless
steel
Housing material: Flame-resistant resin (black)
Isolation: Input to output 1 to output 2 to power
Zero adjustment: -5 to +5 % (front)
Weight: 400 g (0.88 lb)
Span adjustment: 95 to 105 % (front)
Adjustable individually for each output 1 and output 2.
Linearization: 16 points max. within the range of -15.00 –
+115.00 % input or output; represented as percentage of
full-scale
Adjustments: Programming Unit (model: PU-2x)
(Refer to the users manual of JXCON for the adjustments
WJFX SPECIFICATIONS
ES-2272 Rev.8 Page 2/4
http://www.m-system.co.jp/
MODEL: WJFX
PERFORMANCE in percentage of span
Accuracy: ±0.1 % with segment gain ≤ 1 [±0.1 % × gain]
with segment gain > 1
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Response time: ≤ 0.5 sec. (0 – 90 %)
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @1 minute
(input to output to power to ground)
1000 V AC @ 1 minute (output 1 to output 2)
EXTERNAL DIMENSIONS unit: mm (inch)
CLAMP
(top & bottom)
7.8 (.31)
DIN RAIL
35mm wide
8
9
7
6
5
4
2–
4.5 (.18) dia.
MTG HOLE
25 (.98) deep
3
2
10 11
1
11
–M3.5
SCREW
50 (1.97)
107 (4.21)
136 (5.35)
40 (1.57)
50 (1.97)
[3.3 (.13)]
• When mounting, no extra space is needed between units.
TERMINAL ASSIGNMENTS unit: mm (inch)
INPUT RESISTOR
(model: REM)
8
7
6
5
4
9
3
2
10 11
1
Input shunt resistor attached
for current input.
WJFX SPECIFICATIONS
ES-2272 Rev.8 Page 3/4
http://www.m-system.co.jp/
MODEL: WJFX
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Z
S
Isolation
Low Drift
Amplifier
Digital
Computation
Output
Driver
+
–
5
6
4
3
9
1
2
+
–
*
INPUT
R
OUTPUT 1
Z
S
Output
Driver
10 +
11 –
OUTPUT 2
POWER
7
8
U(+)
V(–)
MODULAR JACK
PU-2x
SERIAL TRANSMISSION LINE
Base Socket
*Input shunt resistor attached for current input.
Specifications are subject to change without notice.
WJFX SPECIFICATIONS
ES-2272 Rev.8 Page 4/4
http://www.m-system.co.jp/
WJFX-U3A2-B 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
WJFX-U3A2-B/Q | MSYSTEM | Dual Output Plug-in Signal Conditioners W-UNIT | 获取价格 | |
WJFX-U3A2-C | MSYSTEM | Dual Output Plug-in Signal Conditioners W-UNIT | 获取价格 | |
WJFX-U3A2-C/Q | MSYSTEM | Dual Output Plug-in Signal Conditioners W-UNIT | 获取价格 | |
WJFX-U3A2-D | MSYSTEM | Dual Output Plug-in Signal Conditioners W-UNIT | 获取价格 | |
WJFX-U3A2-D/Q | MSYSTEM | Dual Output Plug-in Signal Conditioners W-UNIT | 获取价格 | |
WJFX-U3A2-J | MSYSTEM | Dual Output Plug-in Signal Conditioners W-UNIT | 获取价格 | |
WJFX-U3A2-J/Q | MSYSTEM | Dual Output Plug-in Signal Conditioners W-UNIT | 获取价格 | |
WJFX-U3A2-R | MSYSTEM | Dual Output Plug-in Signal Conditioners W-UNIT | 获取价格 | |
WJFX-U3A2-R/Q | MSYSTEM | Dual Output Plug-in Signal Conditioners W-UNIT | 获取价格 | |
WJFX-U3A2-S | MSYSTEM | Dual Output Plug-in Signal Conditioners W-UNIT | 获取价格 |
WJFX-U3A2-B 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6