W2YV-66A-M/Q [MSYSTEM]
Space-saving Dual Output Signal Conditioners Mini-MW Series;型号: | W2YV-66A-M/Q |
厂家: | M-SYSTEM |
描述: | Space-saving Dual Output Signal Conditioners Mini-MW Series |
文件: | 总3页 (文件大小:109K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: W2YV
Space-saving Dual Output Signal Conditioners
[3] OUTPUT 2
Y: None
Mini-MW Series
Current
A: 4 – 20 mA DC (Load resistance 350 Ω max.)
Voltage
ISOLATOR
Functions & Features
6: 1 – 5 V DC (Load resistance 5000 Ω min.)
• Galvanically isolating the input and output signals
• Universal power input
[4] POWER INPUT
• High-density mounting
AC Power
M: 85 – 264 V AC (Operational voltage range 85 – 264 V,
Typical Applications
47 – 66 Hz)
• Isolation between control room and field instrumentation
• Eliminating ground loops
DC Power
R2: 11 – 27 V DC
(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)
29.5 (1.16)
[5] OPTIONS
blank: none
Model
88.5
(3.49)
/Q: With options (specify the specification)
ZERO
SPAN
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
124
(4.88)
ZERO
SPAN
mm (inch)
/C02: Polyurethane coating
/C03: Rubber coating
ADJUSTMENT
MODEL: W2YV–[1][2][3]-[4][5]
/V01: Multi-turn fine adjustment
TERMINAL SCREW MATERIAL
/S01: Stainless steel
ORDERING INFORMATION
• Code number: W2YV-[1][2][3]-[4][5]
Specify a code from below for each of [1] through [5].
(e.g. W2YV-6A6-M/Q)
GENERAL SPECIFICATIONS
Construction: Plug-in
• Specify the specification for option code /Q
(e.g. /C01 /V01)
Connection: M3 screw terminals (torque 0.8 N·m)
Screw terminal: Chromated steel (standard) or stainless
steel
Note: When the user requires a current and a voltage
output, specify the current to be the Output 1 which allows
a greater load.
Housing material: Flame-resistant resin (black)
Isolation: Input to output 1 to output 2 to power
Overrange output: Approx. -10 to +120 % at 1 – 5 V
Zero adjustment: -5 to +5 % (front)
[1] INPUT
Current
Span adjustment: 95 to 105 % (front)
Adjustable individually for each output 1 and output 2.
A: 4 – 20 mA DC (Input resistance 250 Ω)
Voltage
6: 1 – 5 V DC (Input resistance 1 MΩ min.)
INPUT SPECIFICATIONS
■ DC Current:
Shunt resistor attached to the input terminals (0.5 W)
[2] OUTPUT 1
Current
A: 4 – 20 mA DC (Load resistance 750 Ω max.)
Voltage
6: 1 – 5 V DC (Load resistance 5000 Ω min.)
W2YV SPECIFICATIONS
ES-5520 Rev.8 Page 1/3
http://www.m-system.co.jp/
MODEL: W2YV
INSTALLATION
Power Consumption
•AC:
Approx. 4 VA at 100 V
Approx. 5 VA at 200 V
Approx. 6 VA at 240 V
•DC: Approx. 3 W
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail
Weight: 200 g (0.44 lb)
PERFORMANCE in percentage of span
Accuracy: ±0.1 %
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Response time: ≤ 0.5 sec. (0 – 90 %)
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @1 minute (input to output
1 to output 2 to power to ground)
EXTERNAL DIMENSIONS unit: mm (inch)
6 (.23)
DIN RAIL
35mm wide
3
2
5
1
4
6
2–4.2x5
(.17x.20)
MTG HOLE
6 (.24) deep
9
8
7
11–M3
SCREW
11 10
22 (.87)
29.5 (1.16)
21.5 (.87) 10 (.39)
84 (3.31)
114 (4.49)
[4 (.16)]
• When mounting, no extra space is needed between units.
W2YV SPECIFICATIONS
ES-5520 Rev.8 Page 2/3
http://www.m-system.co.jp/
MODEL: W2YV
TERMINAL ASSIGNMENTS unit: mm (inch)
INPUT RESISTOR
(model: REM2)
3
2
5
1
4
6
9
8
7
11 10
Input shunt resistor attached
for current input.
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Z
S
Isolation
Low Drift
Amplifier
Output
Driver
+
–
1
2
4
5
9
7
8
+
–
*
INPUT
R
OUTPUT 1
Z
S
Output
Driver
3
6
+
OUTPUT 2
POWER
–
10
11
U(+)
V(–)
Base Socket
* Input shunt resistor attached for current input.
Note: The section enclosed by broken line is only with 2nd output option.
Specifications are subject to change without notice.
W2YV SPECIFICATIONS
ES-5520 Rev.8 Page 3/3
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明