W2XM-1Z1V3-P [MSYSTEM]
Space-saving Dual Output Signal Conditioners Mini-MW Series;型号: | W2XM-1Z1V3-P |
厂家: | M-SYSTEM |
描述: | Space-saving Dual Output Signal Conditioners Mini-MW Series |
文件: | 总4页 (文件大小:114K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: W2XM
Space-saving Dual Output Signal Conditioners
[1] OUTPUT 1
Current
Mini-MW Series
Z1: Range 0 – 20 mA DC
Voltage
POTENTIOMETER TRANSMITTER
(PC programmable)
V2: Range -10 – +10 V DC
V3: Range -5 – +5 V DC
Functions & Features
(Configurator software is used to change output over the
described range of the selected suffix code.
• Provides two DC outputs proportional to a potentiometeror
slidewire position input
For changing between suffix codes, set the Output Range
Selector on the side of unit before software adjustment.)
• Two independent output ranges
• Burnout detection
• PC programmable
[2] OUTPUT 2
• High-density mounting
Same range availability as Output 1
Y: None
Typical Applications
• Tank levels
(Configurator software is used to change output over the
described range of the selected suffix code.
For changing between suffix codes, set the Output Range
Selector on the side of unit before software adjustment.)
• Positions
29.5 (1.16)
[3] POWER INPUT
AC Power
M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,
88.5
(3.48)
47 – 66 Hz)
DC Power
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
R2: 11 – 27 V DC
124
(4.88)
mm (inch)
(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)
P: 110 V DC
(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)
MODEL: W2XM–1[1][2]-[3][4]
[4] OPTIONS (multiple selections)
Standards & Approvals (must be specified)
/N: Without CE
ORDERING INFORMATION
• Code number: W2XM-1[1][2]-[3][4]
Specify a code from below for each of [1] through [4].
(e.g. W2XM-1Z1V3-M2/N/Q)
Other Options
blank: none
/Q: Option other than the above (specify the specification)
• Total resistance (e.g. 1 kΩ)
• Input range (e.g. 0 – 100 %)
• Output 1 range (e.g. 4 – 20 mA DC)
• Output 2 range (e.g. 1 – 5 V DC)
• Specify the specification for option code /Q
(e.g. /C01/S01)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
Note: When the user requires a current and a voltage
output, specify the current to be the Output 1 which allows
a greater load.
/C03: Rubber coating
TERMINAL SCREW MATERIAL
/S01: Stainless steel
INPUT
1: Total resistance 75 Ω – 10 kΩ
RELATED PRODUCTS
• PC configurator software (model: W2CFG)
(Configurator software is used to change the input range.)
Downloadable at M-System’s web site.
A dedicated cable is required to connect the module to the
W2XM SPECIFICATIONS
ES-5504 Rev.6 Page 1/4
http://www.m-system.co.jp/
MODEL: W2XM
PC. Please refer to the internet software download site or
the users manual for the PC configurator for applicable
cable types.
■ DC Voltage
Code V2 (wide spans)
Output range: -10 – +10 V DC
Conformance range: -11.5 – +11.5 V DC
Minimum span: 1 V
GENERAL SPECIFICATIONS
Construction: Plug-in
Code V3 (narrow spans)
Output range: -5 – +5 V DC
Connection: M3 screw terminals (torque 0.8 N·m)
Screw terminal: Chromated steel (standard) or stainless
steel
Conformance range: -6 – +6 V DC
Minimum span: 0.5 V
Offset: Lower range can be any specific value within the
output range provided that the minimum span is
maintained.
Housing material: Flame-resistant resin (black)
Isolation: Input to output 1 to output 2 to power
Overrange output: -15 to +115 %
Load resistance: Output drive 1 mA max.
(e.g. 1 – 5 V: 5000 Ω [5 V ÷ 1 mA])
If not specified, the output range is shown below.
V2: 0 – 10 V DC
(Negative current output is not available.)
Zero adjustment: -5 to +5 % (PC programming)
Span adjustment: 95 to 105 % (PC programming)
Burnout: Upscale standard; downscale, specific value output
or no burnout optional by programming
Status indicator LED: Tri-color (green/amber/red) LED;
Blinking patterns indicate operation status of the
transmitter.
V3: 1 – 5 V DC
INSTALLATION
Power Consumption
Programming: Downloaded from PC; input range, output
type and range, zero and span, burnout type,
user’s linearization table, etc.
•AC:
Approx. 5 VA at 100 V
Approx. 6 VA at 200 V
Configurator connection: 2.5 dia. miniature jack;
RS-232-C level
Approx. 7 VA at 240 V
•DC: Approx. 3 W
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail
Weight: 200 g (0.44 lb)
INPUT SPECIFICATIONS
■ Potentiometer: Total resistance 75 Ω – 10 kΩ
Sensing current: ≤ 0.2 mA
Minimum span
(Range) 0 – 75 Ω : 50 Ω
0 – 150 Ω : 50 Ω
PERFORMANCE in percentage of span
Accuracy: Input accuracy + output accuracy
Input accuracy*: (% of range)
0 – 300 Ω : 50 Ω
0 – 600 Ω : 50 Ω
0 – 75 Ω : ≤ ±0.05 (%)
0 – 1.5 kΩ : 100 Ω
0 – 150 Ω : ≤ ±0.05
0 – 3.5 kΩ : 100 Ω
0 – 300 Ω : ≤ ±0.03
0 – 10 kΩ : 100 Ω
0 – 600 Ω : ≤ ±0.03
If not specified, the input range is 0 – 1.5 kΩ.
0 – 1.5 kΩ : ≤ ±0.01
0 – 3.5 kΩ : ≤ ±0.01
0 – 10 kΩ : ≤ ±0.01
OUTPUT SPECIFICATIONS
■ DC Current
Output accuracy*: ≤ ±0.04 % of max. output range
*Inversely proportional to the span.
See CALCULATION EXAMPLES OF OVERALL ACCURACY.
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) of max. span
Response time: ≤ 1 sec. (0 – 90 %)
Burnout response time: ≤ 2 sec.
Maximum range: 0 – 20 mA DC
Conformance range: 0 – 23 mA DC
Minimum span: 1 mA
Offset: Lower range can be any specific value within the
output range provided that the minimum span is
maintained.
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @1 minute (input to output
1 to output 2 to power to ground)
Load resistance: Output drive 12 V max. for Output 1; 7 V
max. for Output 2
(e.g. 4 – 20 mA: 600 Ω [12 V ÷ 20 mA])
If not specified, the output range is 4 – 20 mA DC.
W2XM SPECIFICATIONS
ES-5504 Rev.6 Page 2/4
http://www.m-system.co.jp/
MODEL: W2XM
CALCULATION EXAMPLES OF OVERALL ACCURACY
[Example] Total Resistance 0 – 1.5 kΩ, Input Range 250 –
750 Ω, Output Type -5 – +5 V, Output Range 1 – 5V
Max. Input Range (1500 Ω) ÷ Span (500Ω) × 0.01 % + Max.
Output Range (10 V) ÷ Span (4V) × 0.04 % = 0.13 %
EXTERNAL VIEW
FRONT VIEW
SIDE VIEW
LED1 (LD1)
Output 1
Configuration DIP SW
LED2 (LD2)
1 2 3 4
ON
LED3 (LD3)
OFF
Configurator Jack
Output 2
Configuration DIP SW
1 2 3 4
ON
*
SW2
SW1
OFF
*Provided only for two-output type.
Refer to the instruction manual for detailed procedures.
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
6 (.23)
DIN RAIL
35mm wide
3
2
5
1
4
6
2–
4.2x5
(.17x.20)
MTG HOLE
6 (.24) deep
9
8
7
11–M3
SCREW
11 10
22 (.87)
29.5 (1.16)
21.5 (.87) 10 (.39)
84 (3.31)
114 (4.49)
[4 (.16)]
• When mounting, no extra space is needed between units.
W2XM SPECIFICATIONS
ES-5504 Rev.6 Page 3/4
http://www.m-system.co.jp/
MODEL: W2XM
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
STATUS
DIP SW
Isolation
POTENTIOMETER
max.
Output
Driver
+
+
–
3
2
1
1
7
8
OUTPUT 1
Low Drift
Amplifier
Digital
Computation
Circuit
2
DIP SW
Isolation
–
4
Output
Driver
min.
+
3
6
OUTPUT 2
POWER
5
–
9
U(+)
V(–)
10
11
CONFIGURATOR
JACK
Base Socket
Note: The section enclosed by broken line is only with 2nd output option.
Specifications are subject to change without notice.
W2XM SPECIFICATIONS
ES-5504 Rev.6 Page 4/4
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明