R7F4HEIP-DC16A [MSYSTEM]
Remote I/O R7F4HEIP Series EtherNet/IP I/O MODULE;型号: | R7F4HEIP-DC16A |
厂家: | M-SYSTEM |
描述: | Remote I/O R7F4HEIP Series EtherNet/IP I/O MODULE |
文件: | 总5页 (文件大小:522K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: R7F4HEIP-DC16A
Remote I/O R7F4HEIP Series
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
EtherNet/IP I/O MODULE
(NPN transistor output, 16 points, tension clamp terminal
block)
/C02: Polyurethane coating
/C03: Rubber coating
Functions & Features
• 16 points NPN transistor output module for EtherNet/IP
• Supports DLR (Device Level Ring) to form a ring topology
RELATED PRODUCTS
• PC configurator software (model: R7CFG)
• EDS file
The EDS file and configurator software are downloadable at
M-System’s web site.
115 [4.53]
A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual for the PC configurator for applicable
cable types.
55 [2.17]
GENERAL SPECIFICATIONS
Connection
72 [2.83]
mm [inch]
EtherNet/IP: RJ-45 Modular Jack
Power supply, exc. supply, output: Tension clamp terminal
Housing material: Flame-resistant resin (gray)
Isolation: Output or exc. supply to EtherNet/IP or FE to
power
MODEL: R7F4HEIP-DC16A-4-R[1]
ORDERING INFORMATION
• Code number: R7F4HEIP-DC16A-4-R[1]
Specify a code from below for [1].
(e.g. R7F4HEIP-DC16A-4-R/Q)
Output at the loss of communication: Configurable via
R7CFG
Status indicator LED: PWR, LNK1, LNK2
(Refer to the instruction manual)
Discrete output status indicator LED: Green LED turns on
with output ON
• Specify the specification for option code /Q
(e.g. /C01)
I/O TYPE
DC16A: NPN transistor output, 16 points
EtherNet/IP COMMUNICATION
Communication Standard: IEEE 802.3u
Transmission: 10BASE-T, 100BASE-TX
Baud rate: 10/100 Mbps (Auto Negotiation function)
Protocol: EtherNet/IP
TERMINAL BLOCK: 4
Tension clamp terminal block for power supply
RJ-45 Modular jack for communication
Tension clamp terminal block for I/O
Max. number of socket connections: 3
Connection type: Exclusive owner / Listen only / Input only
Transmission media: 10BASE-T (STP, Category 5), 100BASE-
TX (STP, Category 5e)
POWER INPUT
DC power
Network topology: Line, star and ring
Max. length of fieldbus segment: 100 meters
IP address: 192.168.0.250 (factory setting);
Only host address in IP address is configurable via rotary
switches, the other items via PC configurator software
(model: R7CFG).
R: 24 V DC
(Operational voltage range: ±10 %; ripple 10 %p-p max.)
[1] OPTIONS
blank: none
DLR supported
/Q: With options (specify the specification)
Port No.: 2222, 44818
I/O data size: One (1) word
Status indicator LEDs: MS, NS (Refer to the instruction
manual for details)
R7F4HEIP-DC16A SPECIFICATIONS
ES-8005-B Rev.0 Page 1/5
https://www.m-system.co.jp/
MODEL: R7F4HEIP-DC16A
OUTPUT SPECIFICATIONS
Common: Negative common (NPN) per 8 points
Number of output: 16 points
PC CONFIGURATOR
The following parameters can be set with using PC
Configurator Software (model: R7CFG)
Refer to the users manual for the R7CFG for detailed
operation of the software program.
Maximum outputs applicable at once: No limit (at 24 V DC)
Rated load voltage: 24 V DC ±10 %, ripple 5 %p-p max.
Rated output current: 0.1 A per point, 0.8 A per common
Residual voltage: ≤ 1.2 V
■ CHANNEL BATCH SETTING
PARAMETER
SETTING RANGE
DEFAULT
Hold
Output Hold / Clear
Hold / Clear
Leakage current: ≤ 0.1 mA
ON delay: ≤ 0.2 msec.
■ EtherNet SETTING
OFF delay: ≤ 0.5 msec.
PARAMETER
SETTING RANGE
DEFAULT
192.168.0.250
255.255.255.0
192.168.0.1
30 (0.1 sec.)
Overload current protection function: Limits the current
value when overcurrent is detected
IP Address
0.0.0.0 - 255.255.255.255
0.0.0.0 - 255.255.255.255
Subnet Mask
Default Gateway 0.0.0.0 - 255.255.255.255
TimeOut 0 - 32767 (0.1 sec.)
Overheat protection function: Turns OFF the outputs when
overheat is detected
(When driving an inductive load, connect a diode in parallel
with the load.)
INSTALLATION
Current consumption
•DC: Approx. 70 mA
(contact I/O load charge is not included)
Operating temperature: -10 to +55°C (14 to 131°F)
Storage temperature: -20 to +65°C (-4 to +149°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Surface or DIN rail (35 mm rail)
Weight: 170 g (0.37 lb)
PERFORMANCE
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute
(output or exc. supply to EtherNet/IP or FE to power)
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
R7F4HEIP-DC16A SPECIFICATIONS
ES-8005-B Rev.0 Page 2/5
https://www.m-system.co.jp/
MODEL: R7F4HEIP-DC16A
EXTERNAL VIEW
IP Address Setting Rotary SW
Status Indicator LED
PC Con!gurator Jack
RJ-45 Modular Jack
Discrete Output Status Indicator LED
Power Supply Connector
Sensor Exc. / Output Connectors
TERMINAL ASSIGNMENTS
■SENSOR EXC. / OUTPUT CONNECTION
Applicable connector: DFMC0,5/13-ST-2,54 (Phoenix Contact) (included in the package)
Applicable wire size: 0.14
0.5mm2, stripped length 7mm
-
Recommended solderless terminal:
· AI0,14-6GY 0.14mm2 (Phoenix Contact)
· AI0,25-6YE 0.25mm2 (Phoenix Contact)
· A0,34-7 0.34mm2 (Phoenix Contact)
1
2
3
4
5
6
7
8
9 10 11 12 13 27 28 29 30 31 32 33 34 35 36 37 38 39
14 15 16 17 18 19 20 21 22 23 24 25 26 40 41 42 43 44 45 46 47 48 49 50 51 52
PIN No.
ID
FUNCTION
24V DC
Output 0
24V DC
0V
PIN No.
27
ID
FUNCTION
24V DC
Output 8
24V DC
0V
1
2
+24V1
Y0
+24V2
Y8
28
3
+24V1
GND1
Y2
29
+24V2
GND2
Y10
4
30
5
Output 2
24V DC
0V
31
Output 10
24V DC
0V
6
+24V1
GND1
Y4
32
+24V2
GND2
Y12
7
33
8
Output 4
24V DC
0V
34
Output 12
24V DC
0V
9
+24V1
GND1
Y6
35
+24V2
GND2
Y14
10
11
12
13
36
Output 6
24V DC
0V
37
Output 14
24V DC
0V
+24V1
GND1
38
+24V2
GND2
39
PIN No.
14
ID
FUNCTION
0V
PIN No.
40
ID
FUNCTION
0V
GND1
Y1
GND2
Y9
15
Output 1
24V DC
0V
41
Output 9
24V DC
0V
16
+24V1
GND1
Y3
42
+24V2
GND2
Y11
17
43
18
Output 3
24V DC
0V
44
Output 11
24V DC
0V
19
+24V1
GND1
Y5
45
+24V2
GND2
Y13
20
46
21
Output 5
24V DC
0V
47
Output 13
24V DC
0V
22
+24V1
GND1
Y7
48
+24V2
GND2
Y15
23
49
24
Output 7
24V DC
0V
50
Output 15
24V DC
0V
25
+24V1
GND1
51
+24V2
GND2
26
52
R7F4HEIP-DC16A SPECIFICATIONS
ES-8005-B Rev.0 Page 3/5
https://www.m-system.co.jp/
MODEL: R7F4HEIP-DC16A
■POWER SUPPLY TERMINAL ASSIGNMENT
Applicable connector: TFMC1,5 / 5–STF–3,5(Phoenix Contact)
(included in the package)
Applicable wire size: 0.2 − 1.5 mm2; stripped length 10 mm
Recommended solderless terminal
• AI0,25-10YE 0.25 mm2 (Phoenix Contact)
• AI0,34-10TQ 0.34 mm2 (Phoenix Contact)
• AI0,5-10WH 0.5 mm2 (Phoenix Contact)
• AI0,75-10GY 0.75 mm2 (Phoenix Contact)
• A1-10 1.0 mm2 (Phoenix Contact)
• A1,5-10 1.5 mm2 (Phoenix Contact)
1 2 3 4 5
1. FE
2. NC
3. NC
Functional Earth
—
—
4. +24V Power Input (
24V DC
)
5. 0V
Power Input ( )
0V
I/O DATA DESCRIPTIONS
■ DISCRETE OUTPUT
15
0
Output 0
Output 1
Output 2
Output 3
Output 7
Output 8
Output 15
0: OFF 1: ON
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm
138 [5.43]
123 [4.84]
115 [4.53]
72 [2.83]
55 [2.17]
DIN rail
(35mm wide)
(4 [.16])
2-4.3 dia. 4 deep.
R7F4HEIP-DC16A SPECIFICATIONS
ES-8005-B Rev.0 Page 4/5
https://www.m-system.co.jp/
MODEL: R7F4HEIP-DC16A
MOUNTING REQUIREMENTS unit: mm [inch]
125 [4.92]
2-M4
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Note: In order to improve EMC performance, bond the FE terminal to ground.
Caution: FE terminal is NOT a protective conductor terminal.
Isolation
3
4
2
+24V1
GND1
Y0
*1
OUTPUT Y0
RJ-45 MODULAR JACK
RJ-45 MODULAR JACK
EtherNet/IP
*1
EtherNet/IP
Isolation
25
26
24
+24V1
GND1
Y7
4
5
2
3
1
24V DC
0V
OUTPUT Y7
NC
1
+24V1
GND1
EXC. SUPPLY (IN)
OUTPUT Y8
NC
14
Control
Circuit
FE
29
30
28
+24V2
GND2
Y8
51
52
50
+24V2
GND2
Y15
OUTPUT Y15
27
+24V2
GND2
EXC. SUPPLY (IN)
40
*1. The network cable can be connected to either one
Specifications are subject to change without notice.
R7F4HEIP-DC16A SPECIFICATIONS
ES-8005-B Rev.0 Page 5/5
https://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明