R6D-PF [MSYSTEM]
Remote I/O R6 Series POWER SUPPLY MODULE;型号: | R6D-PF |
厂家: | M-SYSTEM |
描述: | Remote I/O R6 Series POWER SUPPLY MODULE |
文件: | 总4页 (文件大小:110K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: R6D-PF1
Internal power: Via the Installation Base (model: R6D-BS)
Housing material: Flame-resistant resin (black)
Isolation: RUN contact output to internal bus or internal
power or power input to FG
Remote I/O R6 Series
POWER SUPPLY MODULE
(Euro terminal)
Power indicator LED: Green LED turns on when the power is
supplied.
Functions & Features
• Provides internal power needed for I/O and network
modules from power input
RUN indicator: Orange LED turns on in normal
communication with the host PLC.
■ RUN CONTACT OUTPUT
5.9 (.23)
RUN contact: Terminals (2 – 3) turns ON and (4 – 3) OFF in
normal communication with the host PLC;
Terminals (2 – 3) turns OFF and (4 – 3) ON in abnormal
communication.
94
(3.70)
Rated load: 250 V AC @ 0.5 A (cos ø = 1)
30 V DC @ 0.5 A (resistive load)
Maximum switching voltage: 250 V AC or 30 V DC
Maximum switching power: 250 VA or 150 W
Minimum load: 1 V DC @ 1 mA
102
(4.02)
mm (inch)
Mechanical life: 2 × 10 cycles (rate 300 cycles/min.) When
7
driving an inductive load, external contact protection and
noise quenching recommended.
MODEL: R6D–PF1–R[1]
INSTALLATION
Power input
ORDERING INFORMATION
• Code number: R6D-PF1-R[1]
Specify a code from below for [1].
(e.g. R6D-PF1-R/Q)
•DC: Operational voltage range 24 V DC ±10 % ripple 10 %
p-p max. Approx. 1 A with the maximum I/O extension
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Installation Base (model: R6D-BS)
Weight: 60 g (2.1 oz)
• Specify the specification for option code /Q
(e.g. /C01)
POWER INPUT
DC Power
R: 24 V DC
PERFORMANCE
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @ 1 minute (RUN contact
output to internal bus or internal power or power input to
FG)
[1] OPTIONS
blank: none
/Q: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
GENERAL SPECIFICATIONS
Connection
Internal bus: Via the Installation Base (model: R6D-BS)
RUN contact output, power supply: Euro terminal block
(torque 0.3 N·m)
(Applicable wire size: 0.2 to 2.5 mm2, stripped length 8
mm)
R6D-PF1 SPECIFICATIONS
ES-7781-AK Rev.2 Page 1/4
https://www.m-system.co.jp/
MODEL: R6D-PF1
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
Low Voltage Directive
EN 61010-1,EN 61010-2-201
Measurement Category II (RUN contact output)
Pollution Degree 2
RUN contact output to internal bus or power
supply: Reinforced insulation (300 V)
RoHS Directive
CURRENT CONSUMPTION
The network module and I/O modules operate with 24V DC
power supply via the power supply module. The total
current consumption of the network module and I/O
modules is required to be not more than 1 A. If the total
current consumption exceeds 1 A, change the combination
of I/O modules or reduce the number of I/O modules.
R6xSV2 20mA
R6xSS2 20mA
R6xTS2 20mA
R6xTS2A 20mA
R6xRS2 20mA
R6xDS1 55mA
R6xYV2 25mA
R6xYS2 45mA
R6xDA4 10mA
R6xDC4A 20mA
R6xDC4B 20mA
R6NC1 110mA
R6NC3 110mA
R6ND1 40mA
R6NE1 75mA
R6NE2 75mA
R6NM1 50mA
R6NM2 50mA
R6NF1 100mA
R6NP1 100mA
R6D-PF1 SPECIFICATIONS
ES-7781-AK Rev.2 Page 2/4
https://www.m-system.co.jp/
MODEL: R6D-PF1
EXTERNAL VIEW
(With the cover open)
Power LED
RUN LED
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]
WIRE INSERTION ANGLE: approx. 7°
8–M3
EURO TERMINAL
5
6
7
8
1
2
3
4
102 (4.02)
5.9 (.23)
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Note: In order to improve EMC performance, bond the FG terminal to ground.
Caution: FG terminal is NOT a protective conductor terminal.
RUN LED
Ry
POWER LED
+
NC
RUN CONTACT OUTPUT NO
COM
4
2
3
1
5
6
7
POWER INPUT
–
FG
INTERNAL POWER
INTERNAL BUS
8
R6D-PF1 SPECIFICATIONS
ES-7781-AK Rev.2 Page 3/4
https://www.m-system.co.jp/
MODEL: R6D-PF1
Specifications are subject to change without notice.
R6D-PF1 SPECIFICATIONS
ES-7781-AK Rev.2 Page 4/4
https://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明