R3-PS3L3/CE [MSYSTEM]
Remote I/O R3 Series POWER SUPPLY MODULE;型号: | R3-PS3L3/CE |
厂家: | M-SYSTEM |
描述: | Remote I/O R3 Series POWER SUPPLY MODULE |
文件: | 总4页 (文件大小:115K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: R3-PS3
Remote I/O R3 Series
[2] OPTIONS (multiple selections)
Standards & Approvals
blank: Without CE
POWER SUPPLY MODULE
(double slot, continuous output current 2.0 A)
/CE: CE marking
Housing (refer to the external dimensions)
blank: Standard type
STANDARD TYPE
OPTION /B
55 [2.17]
55 [2.17]
/B: Type B
Other Options
blank: none
/Q: Option other than the above (specify the specification)
130
130
[5.12]
[5.12]
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
109
[4.29]
109
[4.29]
mm [inch]
mm [inch]
/C02: Polyurethane coating
/C03: Rubber coating
GENERAL SPECIFICATIONS
Connection
Internal power output: Via the Installation Base (model: R3-
BSx)
MODEL: R3-PS3-[1][2]
Power input, RUN contact output: M3 separable screw
terminal (torque 0.5 N·m)
ORDERING INFORMATION
• Code number: R3-PS3-[1][2]
Screw terminal: Nickel-plated steel
Isolation: Internal power to power input to RUN contact
output to FG
Specify a code from below for each of [1] and [2].
(e.g. R3-PS3-K3/CE/B/Q)
• Specify the specification for option code /Q
(e.g. /C01)
Power indicator LED: Green LED turns on when the power is
supplied.
■ RUN CONTACT OUTPUT
RUN contact: Turns on (closed) while the power is supplied.
Rated load: 250 V AC @ 0.5 A (cos ø = 1)
30 V DC @ 0.5 A (resistive load)
[1] POWER INPUT
AC Power
K: 85 – 132 V AC
Maximum switching voltage: 250 V AC or 30 V DC
Maximum switching power: 250 VA or 150 W
Minimum load: 1 V DC @ 1 mA
(Operational voltage range 85 – 132 V, 47 – 66 Hz)
(CE not available)
K3: 100 – 120V AC
Mechanical life: 2 × 10 cycles (rate 300 cycles/min.) When
7
(Operational voltage range 85 – 132 V, 47 – 66 Hz)
(Only /CE available)
driving an inductive load, external contact protection and
noise quenching recommended.
L: 170 – 264 V AC
(Operational voltage range 170 – 264 V, 47 – 66 Hz)
(CE Not available)
INSTALLATION
Power consumption (Output current: 2.0 A @ 20 V DC)
L3: 200 – 240 V AC
(Operational voltage range 170 – 264 V, 47 – 66 Hz)
(Only /CE available)
•AC: Approx. 100 VA
•DC: Approx. 50 W or 2.0 A at 24 V
DC Power
Output current: 2.0 A continuous at 20 V DC;
2.2 A for 10 minutes
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
P: 110 V DC
(For dual power supply, the specification of output current is
same. Total current continuously consumed at the network
modules, I/O modules and interface I/O modules must be
within 2.0 A.)
(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)
(CE not available)
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
R3-PS3 SPECIFICATIONS
ES-8358 Rev.12 Page 1/4
https://www.m-system.co.jp/
MODEL: R3-PS3
Atmosphere: No corrosive gas or heavy dust
Mounting: Installation Base (model: R3-BSx)
Weight: 450 g (0.99 lb)
PERFORMANCE
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @ 1 minute
(internal power to power input to RUN contact output to FG)
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
Low Voltage Directive
EN 61010-1, EN 61010-2-201
Measurement Category II (RUN contact output)
Installation Category II (power input)
Pollution Degree 2
Internal power to power input: Reinforced insulation
(300 V)
Internal power to RUN contact output: Basic insulation
(300 V)
RoHS Directive
EXTERNAL VIEW
Power LED
1
4
2
5
3
6
R3-PS3 SPECIFICATIONS
ES-8358 Rev.12 Page 2/4
https://www.m-system.co.jp/
MODEL: R3-PS3
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]
■ STANDARD TYPE
109 [4.29]
■ OPTION /B
19 [.75]
90 [3.54]
55 [2.17]
POSITIONING
GUIDE
6–M3
SCREW
1
2
3
4
5
6
TERMINAL
COVER
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
POWER LED
Isolation
U (+)
V (–)
*FG
2
3
6
1
4
5
Control
Circuit
INTERNAL POWER
POWER INPUT
RUN +
RUN CONTACT OUTPUT
RUN –
*In order to improve EMC performance, bond the FG terminal to the ground.
Caution: This terminal is NOT a protective conductor terminal.
R3-PS3 SPECIFICATIONS
ES-8358 Rev.12 Page 3/4
https://www.m-system.co.jp/
MODEL: R3-PS3
Specifications are subject to change without notice.
R3-PS3 SPECIFICATIONS
ES-8358 Rev.12 Page 4/4
https://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明