R1M-A1T-M2 [MSYSTEM]

PC Recorders R1M Series PC RECORDER;


型号：	R1M-A1T-M2
厂家：	M-SYSTEM
描述：	PC Recorders R1M Series PC RECORDER PC
文件：	总6页 (文件大小：237K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: R1M-A1

PC Recorders R1M Series

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

PC RECORDER

(contact input, 32 points)

/C02: Polyurethane coating

/C03: Rubber coating

Functions & Features

• Industrial recorder on PC

• 32-point dry contact inputs

• Easy system expansion via Modbus RTU

• Recorded data exportable to spreadsheet applications

RELATED PRODUCTS

• Connector terminal block (model: CNT)

• Special cable (model: FCN32)

PACKAGE INCLUDES...

• PC Recorder Software CD

175 [6.89]

• 9-pin D-sub connector, straight type (1 m or 3.3 ft)

[1.57]

115

[4.53]

GENERAL SPECIFICATIONS

Connection

mm [inch]

Power input, transmission: Euro type connector terminal

(Applicable wire size: 0.2 – 2.5 mm

(AWG24 – 12), stripped

length 7 mm)

MODEL: R1M-A1[1]-[2][3]

RS-232-C: 9-pin D-sub connector (male)

(Lock screw No. 4-40 UNC)

Input: M3 screw terminals (torque: 0.6N·m)

or FCN type connector (Fujitsu FCN-365P040-AU)

Screw terminal: Nickel-plated steel

ORDERING INFORMATION

• Code number: R1M-A1[1]-[2][3]

Specify a code from below for each of [1] through [3].

(e.g. R1M-A1T-M2/MSR/Q)

Housing material: Flame-resistant resin (gray)

Isolation: Input to RS-232-C or RS-485 to power

Count memory at power loss: Count value is not saved

when the power supply is lost.

• Specify the specification for option code /Q

(e.g. /C01)

Node address setting: Rotary switch; 1 – F (15 nodes)

RUN indicator LED: Green light blinks in normal conditions.

[1] FIELD TERMINAL TYPE

T: M3 screw terminals

C1: FCN type connector (No CE conformance)

COMMUNICATION

Baud rate: 38.4 kbps

[2] POWER INPUT

AC Power

Communication: Half-duplex, asynchronous, no procedure

Protocol: Modbus RTU

M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,

■ RS-232-C

47 – 66 Hz)

Standard: Conforms to RS-232-C, EIA

Transmission distance: 10 meters max.

■ RS-485

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

Standard: Conforms to TIA/EIA-485-A

Transmission distance: 500 meters max.

Transmission media: Shielded twisted-pair cable (CPEV-S

0.9 dia.)

[3] OPTIONS (multiple selections)

PC Recorder Software Package (must be specified)

/MSR: With

Other Options

blank: none

/Q: Option other than the above (specify the specification)

R1M-A1 SPECIFICATIONS

ES-5660 Rev.19 Page 1/6

https://www.m-system.co.jp/

MODEL: R1M-A1

INPUT SPECIFICATIONS

Input: Dry contact, 32 points

Commons: All negatives

Sensing: Approx. 5 V DC (pull-up resistance 22 kΩ)

≤ 1.5 V at ON

≥ 4 V at OFF

Sampling rate: 50 msec.

• Totalizing Counter Function

Number of input channels: 16

(ch.1 thr. 16 available both with instantaneous status and

totalized value)

Max. input frequency: 100 Hz

Minimum pulse width: 5 ms

Counter reset input: Pulse rising (ch.32 assigned)

Max. counter value: 999 999 999 (reset to zero at overflow)

INSTALLATION

Power consumption

•AC: Approx. 10 VA

•DC: Approx. 7 W

Operating temperature: -5 to +60°C (23 to 140°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

Weight: 400 g (0.88 lb)

PERFORMANCE

Multi-transmission time: 5 msec.

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @ 1 minute (input to RS-232-

C or RS-485 to power to FG)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1

Installation Category II

Pollution Degree 2

Input or RS-232-C/RS-485 to power: Reinforced insulation

(300 V)

Input to RS-232-C/RS-485: Basic insulation (300 V)

RoHS Directive

R1M-A1 SPECIFICATIONS

ES-5660 Rev.19 Page 2/6

https://www.m-system.co.jp/

MODEL: R1M-A1

PC RECORDER SOFTWARE

PC Recorder Software Package (model: MSRPAC-2010) is included with purchases of this model.

Refer to the MSRPAC-2010 data sheet for the contents of the package and the requirements for the PC to be prepared by the

user.

EXTERNAL VIEW

RS-232-C

9-pin Connector

RUN Indicator

LED

Power Terminals

RS-485

Connector

Node Address

Setting Rotary SW

Configurator

Jack

■ RS-232-C INTERFACE

ABBR.

PIN NO. EXPLANATION OF FUNCTION

BA (SD)

BB (RD)

AB (SG)

Transmitted Data

Received Data

Signal Common

CB (CS)

CA (RS)

Clear to Send

Request to Send

Not Used.

DO NOT connect. Connecting may

cause malfunctions.

MODBUS WIRING CONNECTION

R1M

RS-485

R1M

RS-232-C

*1. Internal terminating resistor is used when the device is at the end of a transmission line.

*2. Install shielded cables to all sections and ground them at single point.

R1M-A1 SPECIFICATIONS

ES-5660 Rev.19 Page 3/6

https://www.m-system.co.jp/

MODEL: R1M-A1

CONNECTION DIAGRAM

Note: In order to improve EMC performance, bond the FG terminal to ground.

Caution: FG terminal is NOT a protective conductor terminal.

■ FCN TYPE CONNECTOR

■ M3 SCREW TERMINALS

Input Circuit

Output

Circuit

ch.1

ch.2

ch.1

ch.2

RS-232-C

ch.3

ch.4

ch.5

ch.6

Shielded Twisted-pair Cable

ch.7

To Other

PC Recorders

–

ch.8

COM (–)

ch.9

CN1

Jumper*

A10

A11

A12

A13

A14

A15

A16

ch.10

ch.11

ch.12

ch.13

ch.14

ch.15

ch.16

Term.

Resist.

ch.10

ch.11

Power

Circuit

U (+)

POWER

V (–)

ch.12

ch.13

ch.14

ch.15

ch.16

B16

COM (–)

ch.17

ch.18

ch.17

ch.19

ch.18

ch.20

ch.19

ch.21

ch.20

ch.22

ch.21

ch.23

ch.22

ch.24

ch.23

COM (–)

ch.25

ch.24

ch.25

ch.26

CN2

A10

A11

A12

A13

A14

A15

A16

ch.26

ch.27

ch.28

ch.29

ch.30

ch.31

Count Reset Input ch.32

COM (–)

Count Reset Input ch.32

COM (–)

B16

* When the device is located at the end of a transmission line via twisted-pair cable,

(when there is no cross-wiring), close across the terminal T2 – T3 with the attached

jumper pin (or with a leadwire).

When the device is not at the end, remove the jumper pin.

R1M-A1 SPECIFICATIONS

ES-5660 Rev.19 Page 4/6

https://www.m-system.co.jp/

MODEL: R1M-A1

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]

■ M3 SCREW TERMINALS

175 [6.89]

165 [6.50]

15.5 [.61]

3–5 [.20] dia.

MTG HOLES

T5 T6 T7

T1 T2 T3 T4

DIN RAIL

35 mm wide

10 11 12 13 14 15 16 17 18

19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 35

3 [.12]

40 [1.57]

163 [6.42]

(6 [.24])

FOR WALL MOUNT.

6.2 [.24]

36–M3 INPUT TERMINALS

■ FCN TYPE CONNECTOR

175 [6.89]

165 [6.50]

40 [1.57]

15.5 [.61]

3–5 [.20] dia.

MTG HOLES

T5 T6 T7

T1 T2 T3 T4

Connector Pin

Assignment

DIN RAIL

35 mm wide

CN1

CN2

See Caution below

3 [.12]

163 [6.42]

40 [1.57]

(6 [.24])

FCN TYPE INPUT CONNECTOR

FOR WALL MOUNT.

Caution: DO NOT APPLY EXCESSIVE FORCE onto

the connector. The connector may be destroyed.

A16 B16

R1M-A1 SPECIFICATIONS

ES-5660 Rev.19 Page 5/6

https://www.m-system.co.jp/

MODEL: R1M-A1

SYSTEM CONFIGURATION EXAMPLES

RS-232-C

RS-232-C/RS-485

Converter

(model: R2K-1)

RS-485

TC/DC Inputs

(model: R1M-GH)

Contact Inputs Contact Outputs

(model: R1M-A1) (model: R1M-D1)

When the cable distance between the PC and the R1Ms is long,

insert an RS-232-C/RS-485 Converter for isolation.

Specifications are subject to change without notice.

R1M-A1 SPECIFICATIONS

ES-5660 Rev.19 Page 6/6

https://www.m-system.co.jp/

相关型号：