OR2-1-B 概述
Plug-in Signal Conditioners M-UNIT
OR2-1-B 数据手册
通过下载OR2-1-B数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载MODEL: OR2
4: 0 – 10 V DC (Load resistance 1000 Ω min.)
Plug-in Signal Conditioners M-UNIT
5: 0 – 5 V DC (Load resistance 500 Ω min.)
6: 1 – 5 V DC (Load resistance 500 Ω min.)
4W: -10 – +10 V DC (Load resistance 2000 Ω min.)
0: Specify voltage (See OUTPUT SPECIFICATIONS)
OPTICAL RECEIVER
Functions & Features
• Isolation up to several hundred thousand volts with a fiber
optics cable
[2] POWER INPUT
AC Power
• High-density mounting
B: 100 V AC
C: 110 V AC
D: 115 V AC
F: 120 V AC
G: 200 V AC
H: 220 V AC
J: 240 V AC
Typical Applications
• Ion implanter
• Electron-beam devices
• Dust chamber
• Protection against inductive noises in power substations
50
(1.97)
DC Power
S: 12 V DC
R: 24 V DC
M·UN
IT
Mo
d
80
(3.15)
e
OTl
M·
M
U
e
N
2
L
TE
IT
o
d
l
O
N
P
T
M
IC
IT
A
OR
IC
T
RA
2
L
R
S
R
O
E
P
C
T
A
E
R
E
IV
[3] OPTIONS
blank: none
123
/Q: With options (specify the specification)
(4.84)
mm (inch)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
MODEL: OR2–[1]–[2][3]
/C03: Rubber coating
TERMINAL SCREW MATERIAL
/S01: Stainless steel
ORDERING INFORMATION
• Code number: OR2-[1]-[2][3]
Specify a code from below for each of [1] through [3].
(e.g. OR2-A-B/Q)
RELATED PRODUCTS
• Optical transmitter (model: OT2)
• Fiber optics cable:
• Special output range (For codes Z & 0)
• Specify the specification for option code /Q
(e.g. /C01/S01)
10 meters (model: AMPCP2-10M)
20 meters (model: AMPCP2-20M)
30 meters (model: AMPCP2-30M)
Optical cable used for the AMPCP2
Mitsubishi Chemical Super Eska SH 4001
Minimum bend radius: 25 mm
Tension strength: ≤ 70 N
[1] OUTPUT
Current
A: 4 – 20 mA DC (Load resistance 750 Ω max.)
B: 2 – 10 mA DC (Load resistance 1500 Ω max.)
C: 1 – 5 mA DC (Load resistance 3000 Ω max.)
D: 0 – 20 mA DC (Load resistance 750 Ω max.)
E: 0 – 16 mA DC (Load resistance 900 Ω max.)
F: 0 – 10 mA DC (Load resistance 1500 Ω max.)
G: 0 – 1 mA DC (Load resistance 15 kΩ max.)
Z: Specify current (See OUTPUT SPECIFICATIONS)
Voltage
Connector used for the AMPCP2
Broadcom HFBR-4532Z
1: 0 – 10 mV DC (Load resistance 10 kΩ min.)
2: 0 – 100 mV DC (Load resistance 100 kΩ min.)
3: 0 – 1 V DC (Load resistance 100 Ω min.)
OR2 SPECIFICATIONS
ES-1321 Rev.3 Page 1/3
http://www.m-system.co.jp/
MODEL: OR2
GENERAL SPECIFICATIONS
Construction: Plug-in
Transmission method: Light pulse (100 – 500 Hz)
Maximum transmission distance: 30 meters (98 ft)
Connection
Output & power input: M3.5 screw terminals
Optical fiber: Connector
Screw terminal: Chromated steel (standard) or stainless
steel
Housing material: Flame-resistant resin (black)
Isolation: Output to power
Overrange output: Approx. -10 to +120 % at 1 – 5 V
Zero adjustment: -5 to +5 % (front)
Span adjustment: 95 to 105 % (front)
Power indicator LED: Green LED turns on when the power is
supplied.
OUTPUT SPECIFICATIONS
■ DC Current: 0 – 20 mA DC
Minimum span: 1 mA
Offset: Max. 1.5 times span
Load resistance: Output drive 15 V max.
■ DC Voltage: -10 – +12 V DC
Minimum span: 5 mV
Offset: Max. 1.5 times span
Load resistance: Output drive 10 mA max.; 5 mA for
negative voltage output; at ≥ 0.5 V
INSTALLATION
Power input
•AC: Operational voltage range: rating ±10 %,
50/60 ±2 Hz, approx. 3 VA
•DC: Operational voltage range: rating ±10 %,
ripple 10 %p-p max., approx. 2 W (80 mA at 24 V)
Operating temperature: -5 to +60°C (23 to 140°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail
Weight: 400 g (0.88 lb)
PERFORMANCE in percentage of span
Accuracy: ±0.3 % (Overall performance with the OT2 and
OR2 combined)
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Response time: ≤ 0.6 second (0 – 90 %) (Overall
performance with the OT2 and OR2 combined)
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @ 1 minute (output to power
to ground)
OR2 SPECIFICATIONS
ES-1321 Rev.3 Page 2/3
http://www.m-system.co.jp/
MODEL: OR2
EXTERNAL VIEW
Power LED
A
Zero Adjustment
Span Adjustment
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
CLAMP
(top & bottom)
7.8 (.31)
DIN RAIL
35mm wide
6
5
4
3
25R min.
2–4.5 (.18) dia.
MTG HOLE
15 (.59) deep
7
8
1
2
8–M3.5
SCREW
50 (1.97)
50 (1.97) min.)
103 (4.06)
123 (4.84)
40 (1.57)
50 (1.97)
[3.3 (.13)]
• When mounting, no extra space is needed between units.
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
■ OT2 (input)
■ OR2 (output)
1
2
3
4
Z
S
Waveform
Shaper
Freq. / Volt.
Converter
Output
Driver
+
–
+
–
3
1
2
INPUT
OUTPUT
POWER
FIBER OPTICS
4
Power LED
U(+)
POWER
V(–)
U(+)
V(–)
5
6
7
8
5
6
7
8
Base Socket
Base Socket
Specifications are subject to change without notice.
OR2 SPECIFICATIONS
ES-1321 Rev.3 Page 3/3
http://www.m-system.co.jp/
OR2-1-B 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
OR2-1-B/Q | MSYSTEM | Plug-in Signal Conditioners M-UNIT | 获取价格 | |
OR2-1-C | MSYSTEM | Plug-in Signal Conditioners M-UNIT | 获取价格 | |
OR2-1-C/Q | MSYSTEM | Plug-in Signal Conditioners M-UNIT | 获取价格 | |
OR2-1-D | MSYSTEM | Plug-in Signal Conditioners M-UNIT | 获取价格 | |
OR2-1-D/Q | MSYSTEM | Plug-in Signal Conditioners M-UNIT | 获取价格 | |
OR2-1-F | MSYSTEM | Plug-in Signal Conditioners M-UNIT | 获取价格 | |
OR2-1-F/Q | MSYSTEM | Plug-in Signal Conditioners M-UNIT | 获取价格 | |
OR2-1-G | MSYSTEM | Plug-in Signal Conditioners M-UNIT | 获取价格 | |
OR2-1-G/Q | MSYSTEM | Plug-in Signal Conditioners M-UNIT | 获取价格 | |
OR2-1-H | MSYSTEM | Plug-in Signal Conditioners M-UNIT | 获取价格 |
OR2-1-B 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6