MNV-1-G [MSYSTEM]
Plug-in Signal Conditioners M-UNIT;型号: | MNV-1-G |
厂家: | M-SYSTEM |
描述: | Plug-in Signal Conditioners M-UNIT |
文件: | 总3页 (文件大小:111K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: MNV
R: 24 V DC
V: 48 V DC
Plug-in Signal Conditioners M-UNIT
ANALOG SWITCHING MODULE
Functions & Features
[3] OPTIONS
blank: none
• Selecting one signal as output from up to four analog
input signals
/Q: With options (specify the specification)
• Distributing a single input signal to any or all of the up to
four output channels
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
• High-density mounting
Typical Applications
/C02: Polyurethane coating
• Switching 1 – 5 V DC signal: no contact failure that
happens when using mechanical contacts for this purpose
• Switching low-speed pulse signals
/C03: Rubber coating
TERMINAL SCREW MATERIAL
/S01: Stainless steel
• Switching alternating signals
GENERAL SPECIFICATIONS
Construction: Plug-in
72
(2.83)
Connection: M3.5 screw terminals
Screw terminal: Chromated steel (standard) or stainless
steel
80
(3.15)
Housing material: Flame-resistant resin (black)
Switching: Photo MOSFET relay
136
(5.35)
Isolation: Switching command relay to signal line to power
Monitor LED 1: Red light turns on with SW1 ON
Monitor LED 2: Red light turns on with SW2 ON
Monitor LED 3: Red light turns on with SW3 ON
Monitor LED 4: Red light turns on with SW4 ON
mm (inch)
MODEL: MNV–[1]–[2][3]
ORDERING INFORMATION
• Code number: MNV-[1]-[2][3]
Specify a code from below for each of [1] through [3].
(e.g. MNV-1-B/Q)
INPUT & OUTPUT
■ Signal Line
Max. operational voltage range: ±50 V DC (min. span 10
mV)
• Specify the specification for option code /Q
(e.g. /C01/S01)
Max. operational current range: ±50 mA DC
Max. operational frequency range: 100 Hz
ON resistance: Approx. 50 Ω per line
■ Switching Command: Relay contact or open
collector
[1] SWITCHING CIRCUIT
1: Single circuit
Sensing:
2: Double circuit
Approx. 20 V DC @ 7 mA with single circuit
Approx. 20 V DC @ 14 mA with double circuit
Detection levels
[2] POWER INPUT
AC Power
ON resistance: ≤ 1 KΩ, ≤ 5 V
OFF resistance: ≥ 100 kΩ, ≥ 18 V
Leakage current at OFF: 1 μA (400 V AC between lines)
B: 100 V AC
C: 110 V AC
D: 115 V AC
F: 120 V AC
INSTALLATION
Power input
G: 200 V AC
H: 220 V AC
J: 240 V AC
• AC: Operational voltage range: rating ±10 %,
50/60 ±2 Hz, approx. 2 VA
DC Power
•DC: Operational voltage range: rating ±10 %
S: 12 V DC
MNV SPECIFICATIONS
ES-1691 Rev.9 Page 1/3
http://www.m-system.co.jp/
MODEL: MNV
(ripple 10 % p-p max.) approx. 1 W (30 mA at 24 V)
Operating temperature: -5 to +60°C (23 to 140°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail
Weight: 350 g (0.77 lb)
PERFORMANCE
Response time: Approx. 1 msec.
Leakage current at open circuit: ≤ 1 μA
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute
(switching command relay to singal line to power to ground)
EXTERNAL VIEW
Monitor LED 4
Monitor LED 3
Monitor LED 2
Monitor LED 1
Front Cover (open)
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
CLAMP
(top & bottom)
7.8 (.31)
DIN RAIL
35mm wide
7
14
6
5
12
4
3
2–4.5 (.18) dia.
MTG HOLE
25 (.98) deep
8
9
15 10
1
11
2
14–M3.5
SCREW
50 (1.97)
72 (2.83)
107 (4.21)
136 (5.35)
60 (2.36)
72 (2.83)
[3.3 (.13)]
• When mounting, no extra space is needed between units.
MNV SPECIFICATIONS
ES-1691 Rev.9 Page 2/3
http://www.m-system.co.jp/
MODEL: MNV
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
■SINGLE CIRCUIT
The MNV can select and output one signal (B) from
among the 4 channels (A1 – A4) or distribute a single
analog signal (B) to any or all of the channels (A1 – A4).
SW1
6
5
11
2
A1
A2
A3
A4
+
B
SW2
SW3
SW4
12
4
3
Mon. LED 1
Mon. LED 2
Mon. LED 3
Mon. LED 4
S1
S2
S3
S4
9
+
15
10
1
+
+
7
U(+)
V(–)
SWITCHING
COMMAND
POWER
14
–
8
Base Socket
■DOUBLE CIRCUIT
The MNV can select either (B) of the 2 channels (A1, A2)
as output or distribute a single analog signal (B) to either
or both channels (A1, A2).
SW1
SW2
SW3
SW4
6
5
11
2
A1–1
B–1
B–2
A1–2
A2–1
A2–2
12
4
3
Mon. LED 1
Mon. LED 2
Mon. LED 3
Mon. LED 4
S1
+
9
S2
+
15
10
1
7
U(+)
V(–)
SWITCHING
COMMAND
POWER
14
–
8
Base Socket
Specifications are subject to change without notice.
MNV SPECIFICATIONS
ES-1691 Rev.9 Page 3/3
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明