M8XV2-S2V2Z1-R [MSYSTEM]
Dual Output Super-mini Signal Conditioners Pico-M Series;![M8XV2-S2V2Z1-R](http://pdffile.icpdf.com/pdf2/p00355/img/icpdf/M8XV2-S2V2V2_2180367_icpdf.jpg)
型号: | M8XV2-S2V2Z1-R |
厂家: | ![]() |
描述: | Dual Output Super-mini Signal Conditioners Pico-M Series |
文件: | 总4页 (文件大小:101K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: M8XV2
For changing between suffix codes, set the Output Range
Selector on the side of unit before software adjustment.)
Dual Output Super-mini Signal Conditioners Pico-M Series
SIGNAL CONVERTER
(PC programmable)
POWER INPUT
DC Power
Functions & Features
R: 24 V DC
• Converts a DC input into two isolated process signals
• PC programmable
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
• Space-saving, easy-to-maintain, multi-channel installation
base
[3] OPTIONS
blank: none
/Q: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
MODEL: M8XV2-[1][2]-R[3]
RELATED PRODUCTS
• Installation Base or Single Mount Base Socket (model:
ORDERING INFORMATION
• Code number: M8XV2-[1][2]-R[3]
M8BSx)
Specify a code from below for each of [1] through [3].
(e.g. M8XV2-S2V2V2-R/Q)
This unit must be mounted on dedicated base or socket.
• PC configurator software (model: JXCON)
Downloadable at M-System’s web site.
A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual for the PC configurator for applicable
cable types.
• Input range (e.g. 0 – 5 V DC)
• Output 1 / Output 2 (e.g. 1 – 5 V / 1 – 5 V DC)
If no specifications are specified, model M8XV2-S2V2V2-R/Q
will be shipped.
[S2: 1 - 5 V DC, V2V2: 1 - 5 V DC / 1 - 5 V DC]
• Use Ordering Information Sheet (No. ESU-5469) to specify
linearization data when the I/O signals are nonlinear. Linear
data will be programmed if not otherwise specified.
• Specify the specification for option code /Q
(e.g. /C01)
GENERAL SPECIFICATIONS
Construction: Plug-in
Mounting screw: M3 screw (torque 0.3 N·m)
Housing material: Flame-resistant resin (black)
Power supply: Via the Installation Base terminals
(model: M8BSx)
[1] INPUT
Current
Isolation: Input to output 1 to output 2 to power
Overrange output: Approx. -15 to +115 %
Manual zero adjustments: -5 to +5 %
(factory setting: 0 %)
Z1: Range 0 – 50 mA DC (Input resistance 25 Ω)
Voltage
S1: Range -1 – +1 V DC (Input resistance 1 MΩ min.)
S2: Range -10 – +10 V DC (Input resistance 1 MΩ min.)
(Configurator software is used to change input over the
described range of the selected suffix code.
For changing between suffix codes, set the Input Range
Selector on the side of unit before software adjustment.)
Manual span adjustments: 95 to 105 %
(factory setting: 100 %)
Programming: Downloaded from PC; input range, output
range, zero and span, simulating output, lineraization, etc.
Status indicator LED: Blinking patterns indicate different
operating status of the transmitter.
Configurator connection: 2.5 dia. miniature jack;
RS-232-C level
[2] OUTPUT 1 / OUTPUT 2
V2Z1: Range -10 – +10 V DC / Range 0 – 20 mA DC
V2V2: Range -10 – +10 V DC / Range -10 – +10 V DC
(Configurator software is used to change output over the
described range of the selected suffix code.
M8XV2 SPECIFICATIONS
ES-5469 Rev.8 Page 1/4
http://www.m-system.co.jp/
MODEL: M8XV2
Except the accuracy of input resistor.
INPUT SPECIFICATIONS
See CALCULATION EXAMPLES OF OVERALL ACURACY.
• Input accuracy: (% of max. input range)
-1 – +1 V : ±0.02 %
■ DC Current: 0 – 50 mA DC;
Input resistor incoporated
(If not specified, the input range is 4 – 20 mA DC.)
Operational range: 0 – 70 mA DC
-10 – +10 V : ±0.01 %
0 – 50 mA : ±0.02 %
Minimum span: 2 mA
• Output accuracy: (% of output range)
-10 – +10 V: ±0.02 %
Offset: Lower range can be any specific value within the
input range provided that the minimum span is maintained.
■ DC Voltage: -10 – +10 V DC
0 – 20 mA: ±0.04 %
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) of I/O range
at 0 to 55°C [32 to 131°F]
Operational range: -11.5 – +11.5 V DC
Minimum span: 10 mV for S1; 100 mV for S2
Offset: Lower range can be any specific value within the
input range provided that the minimum span is maintained.
If not specified, the input range is shown below.
S1: 0 – 100 mV DC
Response time: ≤ 0.9 sec. (0 – 90 %)
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength:
1500 V AC @1 minute (input to output 1 or output 2 or
power to ground)
S2: 1 – 5 V DC
500 V AC @1 minute (output 1 to output 2 to power)
OUTPUT SPECIFICATIONS
■ DC Current: 0 – 20 mA DC
HOW TO CALCULATE THE ACCURACY
■ Overall Accuracy
Operational range: 0 – 24 mA DC
Minimum span: 1 mA
[Example] 1 – 5 V input, 1 – 5 V output
Input Accuracy
Offset: Lower range can be any specific value within the
output range provided that the minimum span is
maintained.
= Max. Range ÷ Input Span × Input Accuracy
= 20 ÷ 4 × 0.01 = 0.05
Load resistance: Output drive 6 V max.
(e.g. 4 – 20 mA: 300 Ω [6 V ÷ 20 mA])
■ DC Voltage: -10 – +10 V DC
Output Accuracy
= Max. Range ÷ Output Span × Output Accuracy
= 20 ÷ 4 × 0.02 = 0.1
Operational range: -11.5 – +11.5 V DC
Minimum span: 1 V
Overall Accuracy = 0.05 + 0.1 = ±0.15 %
Offset: Lower range can be any specific value within the
output range provided that the minimum span is
maintained.
Load resistance: Output drive 1 mA max.
(e.g. 1 – 5 V: 5000 Ω [5 V ÷ 1 mA])
If not specified, the output range is shown below.
V2Z1: 1 – 5 V / 4 – 20 mA DC
V2V2: 1 – 5 V / 1 – 5 V DC
INSTALLATION
Current consumption: Approx. 50 mA (70 mA for current
output)
Operating temperature: 0 to 55°C (32 to 131°F)
Operating humidity: 30 to 95 %RH (non-condensing)
Mounting: Installation Base (model: M8BSx)
Weight: 70 g (2.5 oz)
PERFORMANCE
Overall accuracy:
Input accuracy + output accuracy [gain ≤ 1]
(inp. accuracy + out. accuracy) × gain [gain > 1]
Inversely proportional to the span.
M8XV2 SPECIFICATIONS
ES-5469 Rev.8 Page 2/4
http://www.m-system.co.jp/
MODEL: M8XV2
EXTERNAL VIEWS
■ SIDE VIEW
■ FRONT VIEW
I
Output Range Selector
V
Status Indicator LED
Configurator Jack
I
UP Switch
V
V
L
I
H
DOWN Switch
Input Range Selector
V
L
I
H
■ BOTTOM VIEW
Zero/Span Selector
Z
S
OFF
S
Z
Input Range Selector
(SW POSITION: RANGE)
I / L: Z1 (0 – 50 mA DC)
V / L: S1 (-1 – +1 V DC)
V / H: S2 (-10 – +10 V DC)
Output Range Selector
(SW POSITION: RANGE)
I: V2Z1 (-10 – +10 V / 0 – 20 mA DC)
V: V2V2 (-10 – +10 V / -10 – +10 V DC)
Zero/Span Selector
(SW POSITION: MODE)
S: SPAN
Center: OFF
Z: ZERO
Zero/Span is calibrated by using UP/DOWN switches when
the calibration mode is set. Refer to the instruction manual
for detailed procedures.
M8XV2 SPECIFICATIONS
ES-5469 Rev.8 Page 3/4
http://www.m-system.co.jp/
MODEL: M8XV2
EXTERNAL DIMENSIONS unit: mm (inch)
I/O PINS
17.5(.69)
75 (2.95)
83 (3.27)
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
STATUS
INPUT RANGE
SELECTOR
ZERO/SPAN
SELECTOR
Isolation
Digital
Computation
Output
Driver
+
–
A
B
C
D
1
2
4
3
5
6
7
+
–
Low Drift
Amplifier
INPUT
OUTPUT 1
OUTPUT 2
UP/DOWN
SWITCHES
Output
Driver
8
9
+
–
OUTPUT RANGE
SELECTOR
10
11
+
–
JACK
CONFIGURATOR
POWER
Installation Base
Specifications are subject to change without notice.
M8XV2 SPECIFICATIONS
ES-5469 Rev.8 Page 4/4
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明