M8XM2-V2Z2-R [MSYSTEM]
Dual Output Super-mini Signal Conditioners Pico-M Series;型号: | M8XM2-V2Z2-R |
厂家: | M-SYSTEM |
描述: | Dual Output Super-mini Signal Conditioners Pico-M Series |
文件: | 总4页 (文件大小:100K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: M8XM2
Dual Output Super-mini Signal Conditioners Pico-M Series
POWER INPUT
DC Power
R: 24 V DC
POTENTIOMETER CONVERTER
(PC programmable)
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
Functions & Features
• Provides two isolated DC outputs proportional to a
potentiometer or slidewire position input
• PC programmable
[2] OPTIONS
blank: none
/Q: With options (specify the specification)
• Captures zero/span points using front switches
• Space-saving, easy-to-maintain, multi-channel installation
base
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
RELATED PRODUCTS
• Installation Base or Single Mount Base Socket (model:
M8BSx)
This unit must be mounted on dedicated base or socket.
• PC configurator software (model: JXCON)
Downloadable at M-System’s web site.
A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual for the PC configurator for applicable
cable types.
MODEL: M8XM2-[1]-R[2]
ORDERING INFORMATION
• Code number: M8XM2-[1]-R[2]
Specify a code from below for each of [1] and [2].
(e.g. M8XM2-V2V2-R/Q)
• Input Range (e.g. 0 – 800 Ω)
• Output 1 / Output 2 (e.g. 1 – 5 V / 1 – 5 V DC)
If no I/O specifications are specified, model M8XM2-V2V2-
R/Q will be shipped.
GENERAL SPECIFICATIONS
Construction: Plug-in
Mounting screw: M3 screw (torque 0.3 N·m)
Housing material: Flame-resistant resin (black)
Power supply: Via the Installation Base terminals
(model: M8BSx)
[Total resistance 1kΩ, V2V2: 1 - 5 V DC / 1 - 5 V DC]
• Use Ordering Information Sheet (No. ESU-5472) to specify
linearization data when the I/O signals are nonlinear. Linear
data will be programmed if not otherwise specified.
• Specify the specification for option code /Q
(e.g. /C01)
Isolation: Input to output 1 to output 2 to power
Overrange output: Approx. -15 to +115 %
Manual zero adjustments: -5 to +5 %
(factory setting: 0 %)
INPUT POTENTIOMETER
Total resistance 50 Ω – 8 kΩ
Manual span adjustments: 95 to 105 %
(factory setting: 100 %)
(Configurator software is used to change the input range.)
Programming: Downloaded from PC; input range (total
resistance), output range, zero and span, simulating output,
linearization, etc.
[1] OUTPUT 1 / OUTPUT 2
Burnout protection: Upscale standard; downscale or no
burnout optional by programming
V2Z1: Range -10 – +10 V DC / Range 0 – 20 mA DC
V2V2: Range -10 – +10 V DC / Range -10 – +10 V DC
(Configurator software is used to change output over the
described range of the selected suffix code.
Status indicator LED: Blinking patterns indicate different
operating status of the transmitter.
Configurator connection: 2.5 dia. miniature jack;
RS-232-C level
For changing between suffix codes, set the Output Range
Selector on the side of unit before software adjustment.)
M8XM2 SPECIFICATIONS
ES-5472 Rev.8 Page 1/4
http://www.m-system.co.jp/
MODEL: M8XM2
0 – 8 kΩ : ±0.02 %
INPUT SPECIFICATIONS
Minimum span
• Output accuracy: (% of output range)
-10 – +10 V : ±0.02 %
(Input Range (Total Resistance): Minimum Span)
0 – 50 Ω (50 Ω): 2.5 Ω
0 – 20 mA : ±0.04 %
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) of I/O range
at 0 to 55°C [32 to 131°F]
0 – 100 Ω (50 – 100 Ω): 3 Ω
0 – 250 Ω (100 – 250 Ω): 3 Ω
0 – 800 Ω (250 – 800 Ω): 10 Ω
0 – 8 kΩ (800 Ω – 8 kΩ): 10 Ω
Excitation: ≤ 0.65 V DC at 1 kΩ
If not specified, the total resistance is 1 kΩ.
Response time: ≤ 0.9 sec. (0 – 90 %)
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength:
1500 V AC @1 minute (input to output 1 or output 2 or
power to ground)
OUTPUT SPECIFICATIONS
■ DC Current: 0 – 20 mA DC
500 V AC @1 minute (output 1 to output 2 to power)
Operational range: 0 – 24 mA DC
Minimum span: 1 mA
HOW TO CALCULATE THE ACCURACY
■ Overall Accuracy
Offset: Lower range can be any specific value within the
output range provided that the minimum span is
maintained.
[Example] Total resistance 800 Ω, 250 – 750 Ω input, 1 – 5 V
output
Input Accuracy
Load resistance: Output drive 6 V max.
(e.g. 4 – 20 mA: 300 Ω [6 V ÷ 20 mA])
■ DC Voltage: -10 – +10 V DC
= Max. Range ÷ Input Span × Input Accuracy
= 800 ÷ 500 × 0.01
= 0.02
Operational range: -11.5 – +11.5 V DC
Minimum span: 1 V
Output Accuracy
= Max. Range ÷ Output Span × Output Accuracy
= 20 ÷ 4 × 0.02 = 0.1
Overall Accuracy
Offset: Lower range can be any specific value within the
output range provided that the minimum span is
maintained.
= 0.02 + 0.1
Load resistance: Output drive 1 mA max.
(e.g. 1 – 5 V: 5000 Ω [5 V ÷ 1 mA])
If not specified, the output range is shown below.
V2Z1: 1 – 5 V / 4 – 20 mA DC
= ±0.12 %
V2V2: 1 – 5 V / 1 – 5 V DC
INSTALLATION
Current consumption: Approx. 50 mA (70 mA for current
output)
Operating temperature: 0 to 55°C (32 to 131°F)
Operating humidity: 30 to 95 %RH (non-condensing)
Mounting: Installation Base (model: M8BSx)
Weight: 70 g (2.5 oz)
PERFORMANCE
Overall accuracy:
Input accuracy + output accuracy [gain ≤ 1]
(inp. accuracy + out. accuracy) × gain [gain > 1]
Inversely proportional to the span.
See HOW TO CALCULATE THE ACCURACY.
• Input accuracy: (% of input range)
0 – 50 Ω : ±0.02 %
0 – 100 Ω : ±0.02 %
0 – 250 Ω : ±0.01 %
0 – 800 Ω : ±0.01 %
M8XM2 SPECIFICATIONS
ES-5472 Rev.8 Page 2/4
http://www.m-system.co.jp/
MODEL: M8XM2
EXTERNAL VIEWS
■ SIDE VIEW
■ FRONT VIEW
I
Output Range Selector
V
Status Indicator LED
Configurator Jack
I
UP Switch
V
DOWN Switch
■ BOTTOM VIEW
Zero/Span Selector
Z
S
OFF
S
Z
Output Range Selector
(SW POSITION: RANGE)
I: V2Z1 (-10 – +10 V / 0 – 20 mA DC)
V: V2V2 (-10 – +10 V / -10 – +10 V DC)
Zero/Span Selector
(SW POSITION: MODE)
S: SPAN
Center: OFF
Z: ZERO
Zero/Span is calibrated by using UP/DOWN switches when
the calibration mode is set. Refer to the instruction manual
for detailed procedures.
EXTERNAL DIMENSIONS unit: mm (inch)
I/O PINS
17.5(.69)
75 (2.95)
83 (3.27)
M8XM2 SPECIFICATIONS
ES-5472 Rev.8 Page 3/4
http://www.m-system.co.jp/
MODEL: M8XM2
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
STATUS
ZERO/SPAN
SELECTOR
Isolation
POTENTIOMETER
max.
Digital
Computation
Output
Driver
+ A
B
1
2
4
3
5
6
7
+
–
3
2
1
Low Drift
Amplifier
& Burnout
OUTPUT 1
OUTPUT 2
UP/DOWN
SWITCHES
– C
D
Output
Driver
8
9
+
–
min.
OUTPUT RANGE
SELECTOR
10
11
+
–
JACK
CONFIGURATOR
POWER
Installation Base
Specifications are subject to change without notice.
M8XM2 SPECIFICATIONS
ES-5472 Rev.8 Page 4/4
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明