M8PA1-E6A-R/Q [MSYSTEM]
Dual Output Super-mini Signal Conditioners Pico-M Series;型号: | M8PA1-E6A-R/Q |
厂家: | M-SYSTEM |
描述: | Dual Output Super-mini Signal Conditioners Pico-M Series |
文件: | 总3页 (文件大小:99K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: M8PA1
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
Dual Output Super-mini Signal Conditioners Pico-M Series
[3] OPTIONS
blank: none
FREQUENCY CONVERTER
(CE)
/Q: With options (specify the specification)
Functions & Features
• Converting the output from a pulse-type transducer into a
standard process signal
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
• Space-saving, easy-to-maintain, multi-channel installation
base
/C02: Polyurethane coating
/C03: Rubber coating
ADJUSTMENT
/V01: Multi-turn fine adjustment
RELATED PRODUCTS
• Installation Base or Single Mount Base Socket (model:
M8BSx)
This unit must be mounted on dedicated base or socket.
MODEL: M8PA1-[1][2]-R[3]
GENERAL SPECIFICATIONS
Construction: Plug-in
ORDERING INFORMATION
• Code number: M8PA1-[1][2]-R[3]
Mounting screw: M3 screw (torque 0.3 N·m)
Housing material: Flame-resistant resin (black)
Power supply: Via the Installation Base terminals
(model: M8BSx)
Specify a code from below for each of [1] through [3].
(e.g. M8PA1-A6A-R/Q)
• Frequency range (e.g. 0 – 1 kHz)
Use Ordering Information Sheet (No. ESU-5484) for Input
Codes B: DC voltage pulse or E: AC voltage pulse.
• Specify the specification for option code /Q
(e.g. /C01/V01)
Isolation: Input to output 1 to output 2 to power
Zero adjustment: -2 to +2 % (front)
Span adjustment: 98 to 102 % (front)
Input pulse sensing: DC coupled (AC coupled for AC voltage
pulse)
[1] INPUT
A: Dry contact
INPUT SPECIFICATIONS
Frequency range: 0 – 20 Hz through 20 kHz
Pulse width (time) requirement: Duty ratio 20 – 80 % at 100
% input
B: DC voltage pulse (Specify sensitivity)
C: 5 V pulse (sensitivity 2 V)
D: 12 V/24 V pulse (sensitivity 5 V)
E: AC voltage pulse (Specify sensitivity)
■ Dry Contact
Sensing: Approx. 12 V DC @3 mA
ON/OFF level: ≤ 200 Ω/0.5 V for ON, ≥ 100 kΩ/9 V for OFF
■ DC Voltage Pulse: Specify detecting level, amplitude and
DC offset.
[2] OUTPUT 1 / OUTPUT 2
6A: 1 – 5 V DC (Load resistance 2500 Ω min.)
/ 4 – 20 mA DC (Load resistance 300 Ω max.)
44: 0 – 10 V DC (Load Resistance 5000 Ω min.)
/ 0 – 10 V DC (Load Resistance 5000 Ω min.)
55: 0 – 5 V DC (Load resistance 2500 Ω min.)
/ 0 – 5 V DC (Load resistance 2500 Ω min.)
66: 1 – 5 V DC (Load resistance 2500 Ω min.)
/ 1 – 5 V DC (Load resistance 2500 Ω min.)
Waveform: Square or sine
Input impedance: 10 kΩ min.
Input amplitude: 2 – 50 V p-p
Detecting level: 2 – 10 V; 0.6 V ≤ V
H
– V ≤ 1.3 V
L
Max. voltage between input terminals: 50 V
• 5 V, 12 V, 24 V Pulse
Waveform: Square or sine
Input impedance: 10 kΩ min.
Detecting H level
POWER INPUT
DC Power
5 V pulse: ≥ 3 V
R: 24 V DC
M8PA1 SPECIFICATIONS
ES-5377 Rev.5 Page 1/3
http://www.m-system.co.jp/
MODEL: M8PA1
12 V, 24 V pulse: ≥ 6 V
STANDARDS & APPROVALS
Detecting L level
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EN 50581
5 V pulse: ≤ 1 V
12 V, 24 V pulse: ≤ 4 V
■ AC Voltage Pulse: Specify amplitude and frequency.
Waveform: Sine
Input impedance: 10 kΩ min.
Input amplitude: 0.1 – 100 V p-p
Max. voltage between input terminals: 50 V
■ DC VOLTAGE PULSE
Volts
50V max.
VH
VL
Amplitude
Vinp-p
Detecting
Level
DC Offset
t
■ AC VOLTAGE PULSE
Volts
50V max.
VH
VL
t
Amplitude
Vinp-p
0.08V ≤ VH – VL ≤ 1V
INSTALLATION
Current consumption: Approx. 50 mA
Operating temperature: 0 to 55°C (32 to 131°F)
Operating humidity: 30 to 95 %RH (non-condensing)
Mounting: Installation Base (model: M8BSx)
Weight: 70 g (2.5 oz)
PERFORMANCE in percentage of span
Accuracy: ±0.1 % (output 10 – 100 %)
Temp. coefficient: ±0.02 %/°C (±0.01 %/°F)
Response time: (0 – 90 %)
approx. 4 seconds for 0 – 50 Hz
approx. 3 seconds for 0 – 100 Hz
approx. 1 second for 0 – 200 Hz
approx. 0.4 seconds for 0 – 1.99 kHz
approx. 0.1 seconds for 0 – 2 kHz or more
Ripple: 0.2 %p-p max. with input ≥ 10 %
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength:
1500 V AC @1 minute (input to output 1 or output 2 or
power to ground)
500 V AC @1 minute (output 1 to output 2 to power)
SWC test: ANSI/IEEE-C37.90.1-1989
M8PA1 SPECIFICATIONS
ES-5377 Rev.5 Page 2/3
http://www.m-system.co.jp/
MODEL: M8PA1
EXTERNAL DIMENSIONS unit: mm (inch)
I/O PINS
17.5(.69)
75 (2.95)
83 (3.27)
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Z
S
Isolation
Waveform
Shaper
Voltage
Amplifier
Output
Driver
+
–
A
B
C
D
1
2
4
3
5
6
7
+
–
One-Shot
Integrator
INPUT
OUTPUT 1
OUTPUT 2
POWER
Output
Driver
8
9
+
–
10
11
+
–
Installation Base
Input Connection Examples
+12V
■ Dry Contact
■ AC Voltage Pulse
4kΩ
+
–
A
B
A
B
■ DC Voltage Pulse
+
–
A
B
Specifications are subject to change without notice.
M8PA1 SPECIFICATIONS
ES-5377 Rev.5 Page 3/3
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明