M8BS-8K3-R/Q [MSYSTEM]
Dual Output Super-mini Signal Conditioners Pico-M Series;型号: | M8BS-8K3-R/Q |
厂家: | M-SYSTEM |
描述: | Dual Output Super-mini Signal Conditioners Pico-M Series |
文件: | 总8页 (文件大小:311K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: M8BS-8
Dual Output Super-mini Signal Conditioners Pico-M Series
[3] OPTIONS
blank: none
/Q: With options (specify the specification)
INSTALLATION BASE (8 positions)
Functions & Features
• Holding up to 8 modules of Pico-M series signal
conditioners
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
Only solder side of the main PWB is coated.
/C01: Silicone coating
• Power supplied through printed wiring on the base
• Saving wiring work within an instrumentation panel
/C02: Polyurethane coating
/C03: Rubber coating
GENERAL SPECIFICATIONS
Capacity: 8 positions
Connection
MODEL: M8BS-8[1]-[2][3]
Power input: M3.5 screw terminals (M3 screw terminals for
AC power input) (torque 0.8 N·m, 0.5 N·m for AC power
input)
ORDERING INFORMATION
• Code number: M8BS-8[1]-[2][3]
Specify codes from below for each of [1] through [3].
(e.g. M8BS-8U1-R/Q)
Input and output: M3.5 screw terminals (torque 0.8 N·m)
Screw terminal: Nickel-plated steel
Isolation: Input to output 1 to output 2 to power to FG
Power indicator LED: ON with normal voltage level
• Specify the specification for option code /Q
(e.g. /C01)
INSTALLATION
Power Consumption
[1] CONNECTION (output 1/output 2)
U0: Screw terminal block / Screw terminal block
U1: Fujitsu FCN type connector / Screw terminal block
E1: Toshiba DCS SAMP1 use / Screw terminal block
(Panasonic AXM240001 used)
•AC: 130 VA min.
•DC: 0.7 A min.
Operating temperature: 0 to 55°C (32 to 131°F)
0 to 50°C (32 to 122°F) for AC power
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface
(DISCONTINUED; reprace with code "E1A".)
E1A: Toshiba DCS SAMP1 supported / Screw terminal block
(Omron XG4A-4031 used)
Weight:
E3: Toshiba DCS SAIN1 use / Screw terminal block
(Panasonic AXM220001 used)
0.8 kg (1.8 lb) for power code K, L
0.9 kg (2.0 lb) for power code KK
0.7 kg (1.5 lb) for power code R
(DISCONTINUED; replace with code "E3A".)
E3A: Toshiba DCS SAIN1 supported / Screw terminal block
(Omron XG4A-2031 used)
PERFORMANCE
K3: Azbil DCS J-PIM00 module use / Screw terminal block
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength:
[2] POWER SUPPLY UNIT
AC Power
1500 V AC @1 minute (input to output 1 or output 2 or
power to FG)
K: 85 – 132 V AC; single power source
(Operational voltage range 85 – 132 V, 47 – 63 Hz)
KK: 85 – 132 V AC; two independent power sources
(Operational voltage range 85 – 132 V, 47 – 63 Hz)
L: 170 – 264 V AC; single power source
(Operational voltage range 170 – 264 V, 47 – 63 Hz)
DC Power
500 V AC @1 minute (output 1 to output 2 to power)
500 V AC @1 minute (output 1 or output 2 to FG for AC
power input)
MOUNTING REQUIREMENTS unit: mm (inch)
260 (10.24)
4–M5 SCREW
R: 24 V DC; no power supply unit
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
Redundant power supplies are recommended for long time
use without interruption.
M8BS-8 SPECIFICATIONS
ES-5491 Rev.13 Page 1/8
http://www.m-system.co.jp/
MODEL: M8BS-8
CONNECTION DIAGRAM
■ MODEL: M8BS-8U0 (screw terminal block / screw terminal block)
■ CONNECTION DIAGRAM
■ DC Power Supply
■ Single Power Supply, Two Independent Power Sources
+
–
+
–
+
–
+
–
A
B
C
D
A
OUTPUT 1
Ch.1
OUTPUT 1
OUTPUT 2
B
Ch.1
INPUT
Ch.1
OUTPUT
Ch.1
*
*
*
*
INPUT
C
OUTPUT
OUTPUT 2
D
A
+
–
+
–
+
–
+
–
A
B
C
D
OUTPUT 1
Ch.8
OUTPUT 1
OUTPUT 2
B
Ch.8
INPUT
Ch.8
OUTPUT
Ch.8
*
*
*
*
INPUT
C
OUTPUT
OUTPUT 2
D
1
2
3
3
4
5
3
4
5
+
FG
U
POWER
–
PWR1
PWR2
AC POWER
AC POWER
FG
V
FG
U
V
PWR2 provided only for two independent power sources.
* The input and output terminals are reversed for model M8YSx, M8YCx.
Use either Output 1 or Output 2 terminal for the input.
■ MODEL: M8BS-8U1 (Fujitsu FCN type connector, FCN-364P040-AU / screw terminal block)
• Connector Pin Assignment
CN1: Output 1 or input
PIN NO.
A1
ASSIGNMENT
ch.1 +
PIN NO.
B1
ASSIGNMENT
ch.1 –
A2
ch.2 +
B2
ch.2 –
A3
ch.3 +
B3
ch.3 –
A4
ch.4 +
B4
ch.4 –
A5
ch.5 +
B5
ch.5 –
A6
ch.6 +
B6
ch.6 –
A7
ch.7 +
B7
ch.7 –
A8
ch.8 +
B8
ch.8 –
A9 – A20, B9 – B20: Unused
M8BS-8 SPECIFICATIONS
ES-5491 Rev.13 Page 2/8
http://www.m-system.co.jp/
MODEL: M8BS-8
■ CONNECTION DIAGRAM
■ DC Power Supply
■ Single Power Supply, Two Independent Power Sources
CN1
A
B
C
D
CN1
A
B
C
D
Ch.1
OUTPUT
Ch.1
INPUT
Ch.1
OUTPUT
Ch.1
INPUT
*
*
*
*
+
–
+
–
OUTPUT 2
OUTPUT 2
A
B
C
D
A
B
C
D
Ch.8
OUTPUT
Ch.8
INPUT
Ch.8
OUTPUT
Ch.8
INPUT
*
*
*
*
+
–
+
–
OUTPUT 2
OUTPUT 2
1
2
3
3
4
5
3
4
5
+
FG
U
POWER
–
PWR1
PWR2
AC POWER
AC POWER
FG
V
FG
U
V
PWR2 provided only for two independent power sources.
* The input and output terminals are reversed for model M8YSx, M8YCx.
Use either Output 1 (connector) or Output 2 terminal for the input.
■ MODEL: M8BS-8E1A (Toshiba DCS SAMP1 use / screw terminal block)
• Connector Pin Assignment
Output connector: Omron XG4A-4031
CN1: SAMP1
The input or output 1 is connected to the connector.
PIN NO.
ASSIGNMENT
NC
PIN NO.
21
ASSIGNMENT
NC
1
2
NC
22
NC
3
NC
23
ch.5 +
ch.5 –
NC
4
NC
24
5
NC
25
6
NC
26
NC
7
NC
27
ch.4 +
ch.4 –
NC
8
NC
28
9
NC
29
10
11
12
13
14
15
16
17
18
19
20
NC
30
NC
ch.8 +
ch.8 –
NC
31
ch.3 +
ch.3 –
NC
32
33
NC
34
NC
ch.7 +
ch.7 –
NC
35
ch.2 +
ch.2 –
NC
36
37
NC
38
NC
ch.6 +
ch.6 –
39
ch.1 +
ch.1 –
40
Toshiba DCS SAMP1 uses Panasonic AXM240001. As connector
is discontinued, Omron XG4A-4031 is used as an alternative.
(Replace cable side.)
M8BS-8 SPECIFICATIONS
ES-5491 Rev.13 Page 3/8
http://www.m-system.co.jp/
MODEL: M8BS-8
■ MODEL: M8BS-8E3A (Toshiba DCS SAIN1 use / screw terminal block)
• Connector Pin Assignment
Output connector: Omron XG4A-2031
CN1: SAIN1
CN2: SAIN1 for redundancy
PIN NO.
ASSIGNMENT
NC
PIN NO.
11
ASSIGNMENT
ch.5 –
1
2
NC
12
ch.5 +
3
NC
13
ch.4 –
4
NC
14
ch.4 +
5
ch.8 –
ch.8 +
ch.7 –
ch.7 +
ch.6 –
ch.6 +
15
ch.3 –
6
16
ch.3 +
7
17
ch.2 –
8
18
ch.2 +
9
19
ch.1 –
10
20
ch.1 +
Toshiba DCS SAMP1 uses Panasonic AXM220001. As connector
is discontinued, Omron XG4A-2031 is used as an alternative.
(Replace cable side.)
■ CONNECTION DIAGRAM
■DC Power Supply
■Single Power Supply, Two Independent Power Sources
CN1
CN2
A
B
C
D
CN1
CN2
A
B
C
D
Ch.1
INPUT**
Ch.1
INPUT**
*
*
Ch.1
OUTPUT**
Ch.1
OUTPUT**
+
–
+
–
OUTPUT 2
OUTPUT 2
A
B
C
D
A
B
C
D
Ch.8
INPUT**
Ch.8
INPUT**
Ch.8
OUTPUT**
OUTPUT 2
Ch.8
OUTPUT**
OUTPUT 2
+
–
+
–
1
2
3
3
4
5
3
4
5
+
FG
U
POWER
–
PWR1
PWR2
AC POWER
FG
V
FG
U
AC POWER
V
PWR2 provided only for two independent power sources.
* For model M8BS-8E3A.
**The input and output terminals are reversed for model M8YSx, M8YCx.
Use either Output 1 (connector) or Output 2 terminal for the input.
M8BS-8 SPECIFICATIONS
ES-5491 Rev.13 Page 4/8
http://www.m-system.co.jp/
MODEL: M8BS-8
■ MODEL: M8BS-8K3 (Azbil DCS J-PIM00 module use / screw terminal block)
I/O cable : J-SSL / J-SSK
J-SRL / J-SRK
• Location
Output connector : 57GE-40500-751
CN1 : J-PIM00 module use
The input or output 1 is connected to the connector.
Pico-M LOCATION NO.
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
AZBIL DCS PI CONNECTOR
The internal power supply is used for excitation of the pulse
input module.
■ CONNECTION DIAGRAM
■ DC Power Supply
■ Single Power Supply, Two Independent Power Sources
CN1
A
B
C
D
CN1
A
B
C
D
Ch.1
OUTPUT
Ch.1
INPUT
Ch.1
OUTPUT
Ch.1
INPUT
*
*
*
*
+
–
+
–
OUTPUT 2
OUTPUT 2
A
B
C
D
A
B
C
D
Ch.8
OUTPUT
Ch.8
INPUT
Ch.8
OUTPUT
Ch.8
INPUT
*
*
*
*
+
–
+
–
OUTPUT 2
OUTPUT 2
1
2
3
3
4
5
3
4
5
+
FG
U
POWER
–
PWR1
PWR2
AC POWER
AC POWER
FG
V
FG
U
V
PWR2 provided only for two independent power sources.
* The input and output terminals are reversed for model M8YSx, M8YCx.
Use either Output 1 (connector) or Output 2 terminal for the input.
M8BS-8 SPECIFICATIONS
ES-5491 Rev.13 Page 5/8
http://www.m-system.co.jp/
MODEL: M8BS-8
EXTERNAL DIMENSIONS unit: mm (inch)
■ M8BS-8U0-R
280 (11.02)
260 (10.24)
240 (9.45)
3–M3.5
7.3(.29)
POWER TERMINALS
32–M3.5
OUTPUT TERMINALS
8.6 (.34)
CH1
CH8
+
– –
OUTPUT 2 TERM.
POWER LED
+
+
+
+
+
+
+
–
–
–
–
–
–
6
+
+
+
+
4
+
+
+
+
–
–
–
–
–
–
–
–
8
1
2 3
1
2
3
5
7
OUTPUT 1 TERM.
A B A B A B A B A B A B A B A B
C D C D C D C D C D C D C D C D
CH1
CH8
1
CT PROTECTOR (CTR)
*
7.3 (.29)
32–M3.5 INPUT TERMINALS
*1. Included with M8CTx.
■ M8BS-8U0-K, KK, L
280 (11.02)
260 (10.24)
7.3(.29)
5–M3
32–M3.5
OUTPUT TERMINALS
POWER TERMINALS
CH1
CH8
+
– –
OUTPUT 2 TERM.
+
+
+
+
+
+
+
–
–
–
–
–
–
6
+
+
+
+
4
+
+
+
+
–
–
–
–
–
–
–
–
8
1
2
3
*
PWR2 PWR1
1
2
3
5
7
POWER LED
1
2
3
4
5
1
2
3
4
5
OUTPUT 1 TERM.
A B A B A B A B A B A B A B A B
C D C D C D C D C D C D C D C D
CH1
CH8
1
*
POWER UNITS
4
*
CT PROTECTOR (CTR)
2
*
POWER LED
7.3 (.29)
32–M3.5 INPUT TERMINALS
*1. PWR2 provided only for two independent power sources.
*2. Provided only for two independent power sources.
*3. Provided only for single power source.
*4. Included with M8CTx.
M8BS-8 SPECIFICATIONS
ES-5491 Rev.13 Page 6/8
http://www.m-system.co.jp/
MODEL: M8BS-8
■ M8BS-8U1, 8E1A, 8K3-R
280 (11.02)
260 (10.24)
240 (9.45)
3-M3.5
7.2 (.28)
POWER TERMINALS
16-M3.5
OUTPUT TERMINALS
8.6 (.34)
CH1
CH8
+
1
−
+
2
−
+
−
+
−
+
−
+
−
+
−
+
−
8
1
2
3
3
4
5
6
7
POWER LED
CONNECTOR
A B A B A B A B A B A B A B A B
C D C D C D C D C D C D C D C D
CN1
CH1
CH8
1
*
CT PROTECTOR (CTR)
7.3 (.29)
32 - M3.5 INPUT TERMINALS
*1. Included with M8CTx.
■ M8BS-8U1, 8E1A, 8K3-K, KK, L
280 (11.02)
260 (10.24)
7.2(.28)
5–M3
16–M3.5
POWER TERMINALS
OUTPUT TERMINALS
CH1
CH8
+ – + – + – + – + – + – + – + –
1
2
PWR2 PWR1
1
2
3
4
5
6
7
8
3
*
POWER LED
1
2
3
4
5
1
2
3
4
5
CONNECTOR
A B A B A B A B A B A B A B A B
C D C D C D C D C D C D C D C D
CN1
4
CH1
CH8
1
*
POWER UNITS
*
CT PROTECTOR (CTR)
2
*
POWER LED
7.3 (.29)
32–M3.5 INPUT TERMINALS
*1. PWR2 provided only for two independent power sources.
*2. Provided only for two independent power sources.
*3. Provided only for single power source.
*4. Included with M8CTx.
M8BS-8 SPECIFICATIONS
ES-5491 Rev.13 Page 7/8
http://www.m-system.co.jp/
MODEL: M8BS-8
■ M8BS-8E3A-R
280 (11.02)
260 (10.24)
240 (9.45)
3–M3.5
7.2(.28)
POWER TERMINALS
16–M3.5
OUTPUT TERMINALS
8.6 (.34)
CH1
CH8
+ – + – + – + – + – + – + – + –
POWER LED
CONNECTORS
CN2
1
2
3
1
2
3
4
5
6
7
8
A B A B A B A B A B A B A B A B
C D C D C D C D C D C D C D C D
CN1
CH1
CH8
1
*
CT PROTECTOR (CTR)
7.3 (.29)
32–M3.5 INPUT TERMINALS
*1. Included with M8CTx.
■ M8BS-8E3A-K, KK, L
280 (11.02)
260 (10.24)
7.2(.28)
5–M3
16–M3.5
POWER TERMINALS
OUTPUT TERMINALS
CH1
CH8
3
+ – + – + – + – + – + – + – + –
*
POWER LED
1
2
PWR2 PWR1
1
2
3
4
5
6
7
8
CONNECTORS
1
2
3
4
5
1
2
3
4
5
CN2
CN1
A B A B A B A B A B A B A B A B
C D C D C D C D C D C D C D C D
CH1
CH8
1
*
4
POWER UNITS
*
CT PROTECTOR (CTR)
2
*
POWER LED
7.3 (.29)
32–M3.5 INPUT TERMINALS
*1. PWR2 provided only for two independent power sources.
*2. Provided only for two independent power sources.
*3. Provided only for single power source.
*4. Included with M8CTx.
Specifications are subject to change without notice.
M8BS-8 SPECIFICATIONS
ES-5491 Rev.13 Page 8/8
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明